veneer press used for sale

Veneer Press Dryer Manufactured by BABCOCK Model: BDI420/12 Working Width: 4200 mm N. of Heated Sections: 6

This FISCHER & RüCKLE Veneer scissors was manufactured in 2007. It features a milling unit and a gluing unit for butt joint gluing, enhancing its functionality. The machine includes three replacement knives, a milling cutter, and a gluing station. Recently updated with new energy chains in 2020, it measures 7m in length, 3m in width, and 2m in height. Contact us for more information about this machine.

Code: 0583 Brand: RAVNE Model: 3700 Integral steel Knife (blade) for veneer guillotine mm 3600 Length mm 3700 Height mm 110 Thickness mm 12

Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System

Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.

The BTS-Bag Press is ideal for compacting your dry and wet waste into a garbage bag. Large bulky rubbish, but also recyclable materials can be compacted easily and safe to a minimum of its size. The bag compactor impresses with its ease of use and its enormous volume reduction. By compacting these waste and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3 Ton Compaction: up to 90 % (material depending) Machine size: 1861 H x 1200 W x 630 D mm Machine weight: 325 kg Transport height: 1861 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into bins Reduces fre ...

VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm Max 700 x 2,500 mm

Schubert Press The platen size is 1390 mm (52”) x 2490 mm (98”) Electric heaters Make - Schubert Daylight – 305mm Floor standing Total number of rams: 16 Ram diameter: 2 ¾” Working pressure 3500 PSI The overall dimensions are length 3850mm x width 1500mm x height 2200mm Operational The condition of the hydraulics and pump unit along with ram seals is good Spare seals maybe possible (video link available on request)

Herman Schwabe Die Cutting Shaping Press Mechanical Press Model DG-HD Platen size 770mm x 1000mm Die cut shapes Manual cut / load pressure 4" stroke, 7" bore, 10 H.P. Motor, 415 volts 50 cycles 3 phase 14.84 full load current Made in Brooklyn, New York Serial number 50367 Complete with starter Overall dimensions 1.2m x 1.5m high x 3.3m long

Hydraulic glue press with heating base, infinitely variable temperature setting, stuffenlose setting of the adhesive holding time, Power: 5 kW, 380 v 50 Hz; Two-hand operation.

Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Weingarten Excenter Press

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...

Tool cases for press-fit machines Tool holder type Haeger (compatible) 22 press-in tools for press-fit-in contact-press-persefesters Manufacturer: PressOne - Made in Finland

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

was used to fill sugar cane molasses into containers open lubrication Dimensions 700 x 500 x 1200 mm

Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9960 Year of Make: 2016 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, foil The instruction manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.

IMA KILIAN PRESSIMA (mint condition, just over 100 operating hours, year of construction 2007) Accessories include a multi-tool set (5 × 4 mm) (new price: €12,000, 6 months old) and a single tool set (5 mm) Optionally, a control retrofit can be carried out with a Siemens S7-1200 and a Siemens TP panel. Tablet press as in the delivery condition, as new, with complete documentation, functional software etc. ! The IMA KILIAN PRESSIMA tablet press is a compact, universally applicable press for R&D. Thanks to its small dimensions, the PRESSIMA can be easily installed even in small spaces. Tool and die system The PRESSIMA has a replaceable die disc. This means that B or D tools can be used (EU or TSM standard). Operation and display • The PRESSIMA can be equipped with a measurement of the main press force including a digital display on the machine panel for the production of s ...

Vertical baler HSM V-Press 860 plus B, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus B Year of Make: 2019 Hours: 119 Pressing force: 60 t Drive power: 4 kW Filling opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 32.5 cbm/h Dimensions: 2099 x 1245 x 2985 mm (WxDxH) Weight: 2340 kg Materials: foil, paper, cardboard boxes Note: The press is in very good condition. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and g ...

Vertical baler HSM V-Press 860 plus, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2019 Hours: 311 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard, punching residues, clothing, big bags, polystyrene Note: The press is in very good condition. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale i ...

Vertical baler HSM V-Press 860 plus, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2019 Hours: 433 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard, punching residues, clothing, big bags, polystyrene Note: The press is in very good condition. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale i ...

Vertical baler HSM V-Press 860 plus B, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus B Year of Make: 2019 Engine hours: 141 Pressing force: 60 t Drive power: 4 kW Filling opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 32.5 cbm/h Dimensions: 2099 x 1245 x 2985 mm (WxDxH) Weight: 2340 kg Materials: foil, paper, cardboard boxes Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% p ...

used cabinet press Manufacturer: HSM Type: V-Press 825 plus pro Year of construction: 2018 Machine no.: 6152.324. Series No.: 570001118 specifications: Pressing force: 25 t Filling opening: 1,195 - 540 mm (W x H) Press box dimensions - 1,200 x 780 x 1,300 mm (L x W x H) Bale size: 1,200 x 780 x max. 700 mm Bale weight: up to 280 kg Drive power: 4 kW Cycle time at idle (theoretical): 39 sec. Binding: 4-fold - vertical with polyband Machine dimensions: 1,700 x 1,248 x 2,370 mm (W x D x H) Machine weight: 1,210 kg (Subject to errors in the technical data)

Hydraulic press Pellegrini Hot water Pressing area 4000 mm x 1300 mm manual glue application incl. Insertion table Acceptance: Vacuum - Gantry forklift SIRIO

SERGIANI 2 - Floor Continuous Press Model Leopida/Leomatic Slide-in table 6,000 mm x 1,400 mm Press 5,000 mm x 1,400 mm Discharge roller conveyor 4,000 mm x 1,400 mm

HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm

Used press for pre-pressing cheese. Technical data: - producer TEWES BIS Barczewo - year of production 2006 - dimensions: overall length 4780 mm, width 1560 mm, height 3850 mm - pressing area 4.33 m3 - internal dimensions of the bath: length 3700 mm, width 1170 mm, depth 730 mm - mass of pressed cheese approx. 1000 kg - thickness of the cheese layer after pressing approx. 250 mm

used cabinet press Manafacture: HSM Type: V-Press 840 plus Year of construction: 2011 Machine No.: 6147.244. Serial No.: 340001635 Z specifications: Pressing force: 36 t / 356 kN Transport length approx. 1,780 m Transport width approx. 1,247 m Transport altitude approx. 2,985 m Insertion opening width approx. 1,195 m Insertion opening height approx. 0.65 m Drive power 4 kW Weight approx. 1.8 t Bale weight up to approx. 360 kg Binding: 4-fold vertical (Subject to errors in the technical data)

Fogg & Young C Frame Press 150ton 3400mm wide Upstroking 3x heating zones Eurotherm controllers

Steel PS 46.2 Pressing Delivery Age: 1993

Key data: 750 kN, 150 mm

Control: STE 328-89-1 1/2" complete TOX Powerhouse: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V

Cabinet press incl. tilting device Manufacturer: HSM Type: V-Press 860 TimeSave Year of construction: 2021 Specifications Press force: 594 kN Specific pressing force: 63.46 kN/cm² Drive power: 7.0 kW (4.0 + 3.0 kW) Voltage/Frequency: 400 V / 50 Hz Press capacity idle (theoret.): 26.25 m³/h Bale dimensions: 1,200 x 780 x 1,200 mm Bale weight: up to approx. 430 kg Type of feeding: autom. Lift-tilt device with lattice trolley Machine dimensions: 2,202 x 3,584 x 3,004 mm (W x D x H) Binding: manual with quick-link wire Suitable for: cardboard + mixed paper

Bradley & Turton Upstroke Presses Tonnage: 50ton Electric Platens Double Daylight 15” (375mm) sq. platen Fully guarded With individual pump units

HUNGER Maschinenbau GmbH Press cylinder for a hydraulic metal scrap press / scrap press shear (Metso-Lindemann) fully assembled and ready for installation Piston diameter 260mm Piston rod diameter 210mm Stroke 8910mm Outer diameter of the housing 335 mm Cylinder head diameter 365mm Total length 10,635 mm Working pressure cylinder head 180 bar Working pressure cylinder base 225 bar Test pressure cylinder head 250 bar Test pressure cylinder base 315 bar Maximum pressure force 1195 kN Maximum tensile force 332 kN Medium hydraulic oil ISO VG46 Installation position horizontal

Inv. Num. : 7827 Type: LKT 250D Producer: PRESSMONT Created: GO 2019 Parameters: Compressive force: 2500 kN Ram stroke: 250 mm Machine weight: 21000 kg

Samco Clicker Press Model SB-20 400V, 3 phase, 50 cycles Year 2000 CE marked

Key data: 30 t

Hydraulic press can be used in a variety of ways as an assembly press, small series press, manual insert press or heating press in double-column presses Design (H-press) A tour of the press is possible at the Ennepetal camp. It is a 2.5-year-old, unused press with no operating hours, which is sold with a full warranty. List price: 45,000 Technical details: Robust machine frame Capacity: 30 tons – at 300 bar Pump ASC: 28.5 liters/min. Engine: 11 kW – 15 hp Oil tank: 600 × 450 × 500 mm – with approx. 100 litres Cylinder piston: Ø 110 mm Cylinder inside: Ø 70 mm Stroke: 500 mm Fast forward: 45 mm/s Return: 55 mm/s Guides: Ø 50 mm Table top: 800 × 550 mm – with T-slots Plunger plate: 700 × 500 mm – with T-slots Total weight: 2000 kg Valves from BoschRexroth Control cabinet technology from renowned manufacturers Press table size 700 × 500 × 7 ...

Hydropneumatic mode of operation Max. Punch Height: 90 mm Wither stroke: 100 mm Punching stroke: 20 mm Press force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Manufacturer : Schnupp Type of machine : Hydraulic Press Capacity: 2,500 tons Technical details in picture Find more here - / Contact us at -

Technical Description - Model: MARK/C 20-32.5 - Manufacturer: ITALPRESSE - Year of Manufacture: 2003 - Line Function: Designed for laminating veneer on chipboard, MDF, and plywood panels. --------------------------------------------------------------- Components of the Line Vacuum Loading Unit: - For loading thin panels from the scissor lift into the brushing machine. - Passage Width: 2000 mm. - Translation Speed: Adjustable 7–35 m/min. - Cycle per Minute: 3–5 (depending on panel size). - Suction Cups: 6. Brushing Machine: - Working Width: 2000 mm. - Max Opening Height: 100 mm. - Rollers: 2 motorized brushing rollers (180 mm diameter), 2 forwarding rollers (125 mm diameter). Glue Spreader (Brand: Osama): - 2 spreading rollers, 2 dosing rollers. - 4 motors. Index Table for Automatic Composition: - Belt dimensions: 2000 × 4000 mm. - Features photocells and a stop bar for pr ...

Industrial continuous press, including the discharge table. The machine will be in full use until December 20, 2024. From December 21, 2024, the system can and must be dismantled. The glue application machine and the table in front of the press remain and are not for sale. The facility is still fully operational and can be visited at any time. System data: Press brand: Friz Pass Press 1973. Pressplatte: 5300 x 2250 mm Opening: 125mm Heating: hot water / steam Pressing temperatures: Cold approx. 30° to Max temperature 130° (adjustable) Cylinders: 3 rows of 5 cylinders each Diameter of cylinder: 160mm Pressure: 160 Baar (Adjustable) Glue: White glue D4 or modified with hardener. Find more here - / Contact us at -

Fully functional ironing press (automatic) from N&H (Nagel & Hermann, AT) with conveyor belt Details: - Pressing surface: 1,500 mm width – 800 mm depth - Passage width: 1,700 mm - Conveyor belt: Silicone/Teflon (5,900 mm long – 1,500 mm wide) - Transport: Single cycle or automatic, forward or backward. Belt movement without pressing process, speed infinitely variable - Connection values: electricity 380 V/32 KW. Air 6bar/approx. 80L per stroke - Dimensions: 2.90 m long – 1.86 m wide – 1.70 m high The ironing press has only been used sporadically (at most once per month) in the last 5-6 years. To optimize the transport function, additional rollers were installed both at the back and at the front (see pictures in the appendix). Find more here - / Contact us at -

2019 Šmeral/ Pressmont LKT 250 D Crank draw press Type: LKT 250 D Manufacturer: Šmeral/ Pressmont Overhaul: 2019 Nominal force 2500 kN Working path 12.5 mm Ram stroke 250 mm Number of strokes 20 min-1 Usable number of strokes 12 min-1 Shut high 750 mm Adjustment of ram 100 mm Passage under guidance 1600 mm Ram working surface 1380 x 850 mm Table working surface 1575 x 1150 mm Table top thickness 130 mm Power of the main electric motor 30 kW The speed of the main electric motor is 1445 rpm The power of the electric motor for adjustment is 2.2 kW Speed ​​of the electric adjustment motor 1440 rpm Press width 2980 mm Press depth 1500 mm Press height 4615 mm Weight 27,000 kg Included feeder, straightener and decoiler Press in very good condition, under power. Find more here - / Contact us at -

Manufacturer: METSO LINDEMANN Type of Machine : Press Shear Year of Manufacture: 2010 Technical Condition: Good After major renovation in 2023 Meter reading: 18,500 Mt/h Technical Data - Power Supply: Electric 3 x 90KV - Cutting Force: 630 tons - Scrap Compression Force: 630 tons - Number of Pumps: 3 pcs - Capacity: Approx. 8-22 tons/h - Loading Scrap: Left or Right Side - Loading Box: 12m³ - Total Weight (Machine + Container): 75 tons - Control: Remote Control - Hydraulic Oil Capacity: 6,500 liters Find more here - / Contact us at -

Max. Punch Height: 90 mm Wither stroke: 100 mm Punching stroke: 20 mm Press force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg