vee voith elin used for sale

Plant: frequency inverter inverter needed Manufacturer: VEE Voith-Elin electronics Type: Elovert SD 400/15C18.5P 8852520.00 Input: Data L: 400 V + 10-15% q: 50/60 Hz +/-5% I: 27A/35A Output: Data L: 0.. 380 (415) V q: 0.. 300 Hz I: 30A nominal / 38 A continuous Protection IP: 20 Serial No.: 255999 Condition: well maintained

Frequency inverter inverter Plant: frequency inverter inverter needed Manufacturer: VEE Voith-Elin electronics Type: Elovert SD 400/18 5C22P 8853540.00 Input: Data L: 400 V + 10-15% q: 50/60 Hz +/-5% I: 36A/46A Output: Data L: 0.. 380 (415) V q: 0... 200 Hz I: nominal 40A / 50A continuous Protection IP: 20 Serial No.: 256559 Condition: well maintained

Key data: 60 mm, 2 mm

Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-way adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 thorns - Mandrel retraction device - Foot pedal - Bending speed adjustment Country of origin: the Netherlands Motor power: 7.5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

General SKU298T695 LocationBarneveld MakeVeenstra TypeFSL-550-V No.93549 Main Features MaterialMild steel Motor4 KW Specified Features - Stirrer Stirrercheck Without mixing shaftcheck Without stirring headcheck Motorcheck 4 kW 380-660 Volt (Ex) Speed mixing shaftmax. 295 rpm MaterialMild steel Information Mounted on framecheck Floorspace1x0,5 m Total height3,3 m Weight900 kg ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU360U944 LocationBarneveld MakeB.V. speciaal roestvrijstaal industrie Veenwouden No.08892775 Year of construction1990 Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket2.5 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1200 Ltr. Motor0.75 KW Specified Features - Stainless Steel Reactor MaterialStainless steel Stainless Steel Reactors Reactorcheck Capacity1200Ltr. Vessel sizes1200x1300 mm Dished bottomcheck Dished top sidecheck Manholecheck Top connectionscheck Outletcheck With jacketcheck With propellor stirrercheck Motor0,75kW, 220-242/380-420Volt, 2890/502rpm Speed mixing shaft502 Information Mounted on legscheck With switchcheck With switchgearcheck(as is) Floorspace1,55x1,55 m Total height2,70 m Weight1500 kgMinerals & inorganicAPIPlastic & polymersBiopharmaceuticalDyes & pigmentsAg ...

General SKU298T696 LocationBarneveld MakeVeenstra TypeFSL-550-V No.93550 Main Features MaterialStainless steel Motor4 KW Specified Features - Stirrer Stirrercheck Paddle stirrercheck Sizes stirring headdia. 730x60 mm Motorcheck 4 kW 380-660 Volt (Ex) Speed mixing shaftmax. 295 rpm MaterialStainless steel Information Floorspace1x0,5 m Total height3,3 m Weight900kg ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU298T697 LocationBarneveld MakeVeenstra TypeFSL-550-V No.93552 Main Features MaterialStainless steel Motor4 KW Specified Features - Stirrer Stirrercheck Without mixing shaftcheck Without stirring headcheck Motorcheck 4 kW 380-660 Volt (Ex) Speed mixing shaftmax. 140 rpm MaterialMild steel Information Floorspace2x1 m Total height3.3 m Weight900 kg ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU298T698 LocationBarneveld MakeVeenstra TypeFSL-550-V No.93551 Main Features MaterialStainless steel Motor4 KW Specified Features - Stirrer Stirrercheck Paddle stirrercheck Sizes stirring headdia. 730x60 mm Motorcheck 4 kW 380-660 Volt (Flender ATB-Loher) (Ex) Speed mixing shaftmax. 140 rpm MaterialStainless steel Information Mounted on framecheck With switchcheck Floorspace2x1 m Total height3.3 m Weight900 kg ATEX compatiblecheckStirrersVeenstraMixers > StirrersBrand > Veenstra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU201S008 LocationBarneveld MakeNivoba (NL) TypeFS 250-32L No.1988-09135 Year of construction2007 Main Features MaterialStainless steel Motor2.2 KW Surface32 m2 Specified Features - Rotating vacuum filter Rotating vacuum filtercheck Filter surface32 m2 Drum sizesdia 2500x4050mm Motor2,2 kW 220-240/380-415 volt Drum speed0,3-3 rpm With stirrercheck Motor3 kW 230/415 volt With knife dischargecheck Mechanical operatedcheck Motor0,12 kW 220-240/380-45 volt With vacuum pumpSpeck Pumpen (3x) typeVH0800-41-30-009 (1x), ASK6501-13-60003 (2x) Motor30 kW 300/690 volt, 7,5 kW 400/690 volt With liquid pumpcheck Motor4 kW 400/690 volt MaterialStainless steel 1.4301 (304) Information With switchgear(as is) Total height3,1 M Weight12000 Kg CEcheck Floorspace5,7x3,5 M Technical specs Extra information.Rotating vacuum filtersNivoba VeendamFilters > Rotating vac ...

Type: DOROBEND DOB 32/90 Manufacturer: VEENEX v.o.f., The Netherlands Year of production: 2000 Location: Czech Republic Description: The machine is in good technical condition. Number of tubes bent at one stroke at a time: TR 32x2 mm: 1 TR 26x2 mm: 2 TR 22 x 1.5 mm: 3 TR 18 x 1.5 mm: 4 Bending Head Distance Range: 220-2000mm Possibility to operate 1 or 2 bending heads Power: 5.5 kW Connection voltage: 3 x 380 V, 50 Hz Bending unit drive: hydraulic Oil filling: 120 l Number of bending heads: 2 Hydraulic pressure for controlled deformation of bent material: yes, 2x Orientation bending radius: 3 x tube diameter Max. bending radius: 200 mm Min .. bending radius: 40 mm Max. bending angle: 100 ° Min. bend distance: 220 mm Max. bend distance: 2000 mm One cycle time (90 °, including backward movement): 5 sec. Machine dimensions: LxWxH: 2700 x 110 x 1400 mm Machine we ...

Description: Includes charger , Fork length 1500 mm , Carrying capacity 800 kg Approx. Onsite Dimension. (l x w x h): 1,700 x 800 x 1,200 mm, weight approx.: 170 kg

Sale of Moog RKP 80 + Voith internal gear pump. Exact type of lashing pumps: Moog 2518218727 + Voith IPC / 5/50. The Moog pump has 80 cm3 and the Voith pump 50 cm3. The pumps run approx. They've spent 3,000 hours on pure oil, so they're new.

Krauss Maffei No. 6445689 45 kW

Qty. 1 Second-hand paper mill Mfc.: Valmet , METSO, Voith, Honeywell, Siemens, Ahlström Sulzer, Clark & Vicario, Andritz, Alfa Laval, GL & V Hedemora, Beloit, Tampella, Built: 1971 Rebuild: 1990 & 2004 Product: Uncoated magazine paper Production capacity: 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Headbox Mfc.: Valmet Type: OptiFlo 2 with dilution profiling (2004) Wire section Mfc.: Valmet Type: OptiFormer LB (loadable blades) (2004) Press section Mfc.: Valmet Type: SymPress B with 4th press (1990/2004) – shoe press in 3rd nip (2004) Drying section Mfc.: Valmet Type: SymDry (1990) – 4 single tier drying groups 2 double tier drying groups – ropeless tail threading (1990/2004) Max designed structural speed of parts rebu ...

Qty. 1 Second-hand paper mill for production of SC-A paper (Super Calendered) Mfc.: Valmet Built: 1971 Rebuild 1990 and 2004 Product: uncoated magazine paper Production capacity 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min 3 Super calanders 3 Winders Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Paper machine basic information Headbox Valmet OptiFlo 2 with dilution profiling (2004) Wire section Valmet OptiFormer LB (loadable blades) (2004) Press section Valmet SymPress B with 4th press (1990/2004) Shoe press in 3rd nip (2004) Drying section Valmet SymDry (1990) 4 single tier drying groups, 2 double tier drying groups Ropeless tail threading (1990/2004) CD weight control with dilution valves 2004, Metso DNA. Moisture profiling at press section with Measurex-Devron steambox 1992 (57 contro ...

Voith Turbo 3-pump combination No. 170, 383114LV5-50 Type A10 VSO 100 DFE IPN 60, IPV 5-50 170

With Elin 55kW electric motor, 1480 rpm

-Maximum grinding length 5000 mm; -for rollers from 200 to 1850 mm in diameter; -with drive for the calender roller; -with support trestles / lynettes; -with control cabinet; -with a pallet of grinding wheels; -Documentation for the machine available; -Machine size approx. L/W/H: 10700 x 1900 x 2600 mm; -Drive size gearbox approx. L/W/H: 2500 x 1200 x 1600 mm; -Control cabinet approx. L/W/H: 2400 x 600 x 2220 mm; -Pallet size approx. L/W/H: 1200 x 800 x 500 mm.

Alternator generator ELIN MCT-440 L08 T6B-9 280kw electric motor 400V 757 R/min air cooled Manufacturer: ELIN Model: MCT-440 L08 T6B-9 Number: 715983 Year of built: unknown Performance: 280kw Supply: 400 V Revolutions: 757/min Weight: 2,530 kg for further details please refer to the pictures.

Brueninghaus hydraulic pump A4VSO 125 EO1/10, max. 280 bar, capacity: approx. 125 ccm, ELIN E-motor 55 kW

Total folding length: 4100 mm; Gooseneck depth: 315 mm; Table/slide distance to top dead center: 500 mm; Table width: 400 mm; Pit table, depth: 1000 mm; Equipment: CNC CYBELEC DNC7000 Graphic driving the 3 axes: Y1Y2; X 2 thrust heads adjustable in height and spacing 1 straight punch with heavy load, length 4100 mm 1 multiveded die 170x170 with vees of: 16-24-40-70.700 of 130mm 1 x 170X170 single vee die of 150mm Lg 2500mm

Folding length 4000mm; Equipment: Controller 600M 3 axes: Y1/Y2/X Manual R Manual table dome Front bracket Several multi-vees available

Used rebuild KHD Humboldt Wedag model S3?01 decanter. New 1992. Cylinder made of hardened steel (it does not rust but not stainless) lenght of cylinder 1370 mm, cone lenght 110 mm. Screw made of steel also hardened. Drum speed 2200 rpm. Motor 30 kW with clutch dydrodynamic made by Voith (easy start). Lubrication by ump. New bearings casindgs, transmission belts, all bearings are new, seals. During the rebuild drum and zscrew ware balanced. Suport fram with antivibrators. Manual available in Polish. Capacity approx. 20000 L/H.

1 neuwertiger, factory-tested single overhead travelling crane with angle trolley Oblique cord stabilization for traverse operation Payload 10.000 kg Span approximately 15,850 mm make VOITH Year of production/workshop test 1995/2016 Lasting only 1 year equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation (magnetic control prepared, but not included in the delivery), trolley with frequency control operating speeds, cradle frame, radio remote control: Hoist load approx. 0 8.3 m / min Load approx. 0 22.0 m / min Trolley gear 0-40.0 m / min Crane chassis 0-60.0/90.0 m / min

E engine durchfl. Water cooled Three-phase asynchronous motor Manufacturer: ELIN Model: MKH-435 K04 Z9Z Performance: 315kw Supply: 400 V Revolutions: 1336/min Weight: 1700kg NEW, original box, unused from old stock for further details please refer to the pictures.

Power generator Hitzinger, 68 kVA, otherwise gemaess Bilder More: diesel generator, emergency generator, ship diesel Simmering Graz Paucker SGP / ELIN S12 /Elin 250 kVA See pictures below

1 plant be certified, very well received. Single girder overhead travelling crane with angle trolley Load approx. 5,000 kg Wingspan approx. 16.750 mm hook path maximum approx. 8,000 mm Make VOITH Year of production/workshop test 1993/2016 equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation including load beam, with frequency control, maintenance Jetty, radio control Working speeds: Hoist up to 20.0 m / min Trolley gear up to approx. 26.0 m / min Crane chassis up to approx. 90.0 m / min

Slow runner with ELIN marine diesel generator 250 kVA.Sehr little running hours!

Qty. 1 Second-hand Kraft (Flute Liner) paper mill Mfc.: Mitsubishi – Bellot Built: 1973 Overhauled: 2005 by VOITH / IHI Very high investment! Type: Kraft – Flute liner paper mill Width: 3363 mm Kraft (Flute liner) Paper mill Product: Flute Liner Printing Paper Kraft Paper Writing Paper Grammage: 80 – 260 g/m² (70-120 gsm basic) Rebuilt main components of the mill by VOITH & IHI in 2005 Paper width: 3200 mm to 3363 mm Speed: 600 m/min to 800 m/min Max. 800 m/min. at 80 gsm Capacity range: 170 ton/day to 270 ton/day Former: Hydro former (with Dandy roll) to Duo former Dilution Head box Size press: Pond size press to Speed sizer Vacuum pump: renewal

Used hydraulic pump, Voith IPH 5/64 gear pump, for sale in good condition. Capacity 92 l / min.

An original sealed 208 liter barrel with gear oil is offered. Manufacturer Totoal Type Fluids GIII Applications Synthetic lubricant for gearboxes and hydraulic systems, if a GM Dexron® III fluid is prescribed. Specifications Total Fluide G 3 MB release 236.9 Volvo 97341 MAN 339 Type Z1/V1/L1 Voith 55.6335.35 ZF TE-ML 04D, 09 (except car steering systems with ZF vane pumps), 11B, 14A Dexron® III G, III H Ford Mercon Allison C4 The barrel is originally sealed!

weight max.: 12,5 t stroke: 5,5 mm clamping width: 5 mm Height: . m total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The crane includes brackets and guide rails 60m Coil device not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double pump for Krauss Maffei machines Voith Rexroth control pumps 3-fold SY2DFE1-21/071-071 KM No. 6441936 MNR: R900751978

The IQM MICROSTEP SPLR 6001.25 Pr BEM 12 CNC plasma cutter was manufactured in 2008 by the Slovak company IQM s.r.o. Thanks to the rotary head tilted by ± 50 degrees, it is possible to cut sheets of various thicknesses - 25 mm with a burner tilt of 50 degrees, 35 mm with a burner inclination up to 25 degrees and 50 mm with a zero burner inclination. The working table has a bridge structure with pneumatically opened sections, and its dimensions are (L x W) 6000 mm x 2500 mm. The burner is equipped with, among others in: MSNC 500 CNC control, AsperWin software with AsperBevel module or Hypertherm HPR 130 plasma unit. The total weight of the R-SPLR 6001.25 PrBEM12I (G) plasma cutter is 5000 kg. Technical data of the IQM MICROSTEP R-SPLR 6001.25 PrBEM12I (G) CNC plasma cutter - dimensions of the working table (length x width): 6000 x 2500 mm - type of working table: bridge with pneum ...

3 phase squirrel cage motor, 90 kW 1007 r/min, 400 V D, 50 Hz, 158,000A, cos.phi 0.810, TCLB, 40 degrees C, 1000 m, price ex works

with running track and radio remote control

Sell Perkins engine with torque converter gearbox Engine type LD20170 Torque converter transmission Voith Type 843K Price VB

Qty. 1 Second-hand paper mill Mfc.: VOITH, Mitsubishi, Johnson, MAN Turbo, Reitz, Quattroll Built: 2005, 2006 Type of Head Box Masterjet F with Modulejet No. of Top Former: Voith Duo-d Pond Width: 3,700 mm Wire Width: 3,850 mm Max. Sheet Width: 3,363 mm on Reel Type of size Press: Metering Size Press Speed Sizer” Voith Dryer Section: Pre Dryer Cylinder 30 pcs After Dryer Cylinder 8 pcs Paper Grade: Printing & Writing Paper Basic Weight: 60 ~ 260 gsm (main 70~120 gsm) Max. OP Speed: 800 m/min at 80 gsm Product capacity: Avg. 271 ton/day at 80 gsm

Qty. 1 Second-hand paper production plant Mfc.: Voith Built: 1982 Modernised: 2001, 2006, 2012 Stopped: 2019 Paper program: GW/Pulp/DIP Width: 5.88 m Weight: 26 – 70 gsm Coating program: Width: 5.78 m Weight: 26 – 70 gsm - 2 x 18 gsm Scope of supply: Fourdrinier paper machine Stock preparation system Vacuum system Heat recovery Bleaching line Coating machine Prewinders Winders Overhead cranes

Welding converter, DC welding machine, welding transformer ELIN SWA 304 P 7.5 kW 25 - 300 A 220 - 500 V 3AC used, tested ! Dimensions: 1000 x 600 x 840 mm

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with double pump -Hydraulic pumps: type IPC5-40 / IPC6-30 -Pressure: up to 250 bar -Flow rate: /min -Engine: Loher KNGA250SB-04Z 75 kW -Individual components: see photos -Dimensions: 2300/800/H9500 mm -Weight: 1000 kg

Valve block, control block, hydraulic control block, control unit, hydraulic control -Manufacturer: Voith, control unit from Uldrian TSM 22-8 rotary transfer machine -Type: PWM4-A RS-332 REV.: 8 BIOS : P0159-01 -Number: 5x control unit available -Price per piece -Dimension: 150/135/H50 mm -Weight: 0.5 kg/pc.

Valve block, control block, hydraulic control block, control unit, hydraulic control -Manufacturer: Voith, control unit from Uldrian TSM 22-8 rotary transfer machine -Type: PWM4-A RS-332 REV.: 4 BIOS : P0097-01 -Number: 9x control unit available -Price per piece -Dimension: 150/135/H50 mm -Weight: 0.7 kg/pc.

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit, double hydraulic pump -Double hydraulic pump: from injection molding machine KHS Krauss Maffei KM 1000-5000A -Pump 1: Voith type IPH 6/5-125/50 300 bar - Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher type? -Individual components: filters/valves see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power pack, double hydraulic pump -Double hydraulic pump: from injection molding machine Battenfeld BA-T2400 -Drive: Siemens type 1LA6 207 30 kW 1465 rpm -Delivery rate: l / min -Valves: Voith type DBV40 E25 FYM320 24 / DBV20 E25 FYM320 24 -Filter unit: Hydac -Operating pressure: bar -Dimensions: 1275/620 / H500 mm -Weight: 322 kg

Electric motor, three-phase motor -Power: 3 kW -Speed: 930 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 440/340/H320 mm -Weight: 52 kg

Cutting capacity of carbon or medium alloy steel with cold R of 80 dN/mm2 @T = 1150 C: square 40 - 100 mm; round 40 - 100 mm @T = 1050 C: square 40 - 90 mm; round 40 - 100 mm T min/max cut with standard blades 1.000 - 1.250 C Cutting length: 50 - 400 mm Load bank maximum capacity: 10 tons Loadable bar length: 4.5 - 10 m Loadable bars section (round and square) 40 - 100 mm Other relevant plant engineering:  ELIND induction furnace ~ 500 Kw Abundant availability of accompanying documentation

We are selling blow molding machine Voith fisher maximum capacitity 100 Liter. We put on the machine new extruder 80mm with new gearbox, heaters and motor 37kw,also new accumulation head is instaled capacity 5 liter. Machine have new pneumatic, new electric cabinet with plc and main control unit with 15 inch touch panel. Also machine have new plc with 7 inch touch panel for wall thickness control.

12 meters long, 1 meter wide

General SKU005X004 LocationBarneveld MakeSpeciaal Roestvrijstaal Industrie Veenwouden No.1913873 Year of construction1991 Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume1200 Ltr. Motor1.1 KW Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Closed stirring vessel(1x) Capacity1200 Ltr Vessel sizesdia. 1200x700mm Dished bottomcheck Dished top sidecheck Top connections(12x) Outletdia. 50mm Max. temperature-10/+50 Degr. C. Motor1,1 KW, 220/380 Volt Information Mounted on legscheck Floorspace1,2x1,2 M Total height3,0 MStirring vesselsSpeciaal Rvs InStirring vessels > Stirring vesselsBrand > Speciaal Rvs In What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...