veb werkzeugmaschinenfabrik used for sale

-Tool width: approx. 1200 mm; -front-mounted table approx. 600 mm; The machine was used to punch holes about 2 mm into thin sheets;

Description: Nominal force: 250 kN Speed: 16 MPa Downward speed: 100 mm/s Upward speed: 450 mm/s Stroke of ram: 500 mm Outreach: 360 mm Maximum distance between table and ram: 800 mm Serienummer: 036-008/60 Total weight: 2.2 tons Temperature range: 10°C to 45°C Max. pressing force: 25 to, Approx. Onsite Dimension. (l x w x h): 2,060 x 1,000 x 2,700 mm, weight approx.: 8,000 kg, stroke: 500 mm

Max. pressing force: 160 to, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,400 x 4,500 mm, weight approx.: 7,000 kg, table surface area l x w : 900x630 mm, stroke: 500 mm

Electric flanging and beading machine folding machine used; WMW VEB Werkzeugmaschinenfabrik Zeulenroda; Model: UBSBH1; No./Year: 029/2/33/59; with 6 sets of rollers / beading rollers; Drive motor VEM; 220/380 V; 1.42/0.82 A; 50 Hz; 0.25 kW; 100 rpm; Total approx. 1350 x 600 H 1220 mm;

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

Schwingkipptisch 1 / tilting table We offer: 6 used vibration table / table We offer: a used Schwingkipptisch 1 / tilting table 1 3.50 x 8.00 Technical data: Manufacturer: unknown Type: 8 x 3.5 m Machine number: unknown Year of built: unknown Documentation: not available Schwingkipptisch 3000 x 8000 x 8 mm designed for a traffic load estimated p 500 kp / m² = m², with formwork upper part completely stored on vrwindungssteifen Kippramen. Under construction from solid shape Weldment for establishing free to carry firm, level floor. Fully fitted with built-in tilting hydraulic for tilt at approximately 80 °, with 2 cylinders, electrical pump unit with oil tank, control and limit switch device and piped inside the tilt table construction. Ingredients: Vibration / vibration motors: 6 pieces Manufacturer: VEB Baustoffmaschienen Ludwigslust Type: A 800/3 28/71 No. o.a. 43190 ...

Used membrane chamber filter press / filter press Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix package) Plate size: 1000x1000mm Cake thickness: 40 mm Useful length: 5500 mm Number of plates: 60 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: manual Filter cloths: optional Membrane mix package The plant is in good condition. The system is available 15 times !

Wire stitching machine VEB LEIPZIG P 66 Built in 1972 Machine No.: 66.72.126 1 staple head Functional The machine can be demonstrated in our warehouse - please make an appointment. Wire Stitching Machine VEB LEIPZIG P 66 1972 In 1972 Serial: 66.72.126 1 stitching head working condition Test is possible in our stock – just make an appointment. ••••••••••• The machine is available in the warehouse and can be tested. Test in our stock is possible. The machine can be visited in the warehouse. Can be visited in our stock. Only to commercial buyers with proof. Purchase only available for commercial customers with proof Sale without warranty and warranty. No return accepted. The machine is sold as it goes and stands. We sell the machine "as is", no warrenty, no guaranty. We don't take the goods back.  ...

Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.

Gear column drilling machine make WMW VEB Saalfeld type BS 25BMachine -No: 9587/59Technical specifications:Drilling capacity in steel - diameter: 4 - 32 mmThread cutting ST 60 / Alu up to: M 20 / M 32Spindle mount: MK 3Throat: 280 mmDrilling stroke: 150 mm4 spindle speeds: 125 - 710 rpm.4 feed rates: 0.10 / 0.16 / 0.25Table size with channel: 570 x 475 mmTable size clamping surface: 450 x 355 mmDrive power: 3 kWWeight: 700 kgExternal dimensions: 900 x 570 x 2400 mmWith- automatic feeds- Thread cutting with compensating chuck- machine light- Emergency stop switch- separate cooling deviceused, in working conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine ...

1. STRIP WIDTH: 700-1550 MM, THICKNESS: 0.3-3.0 MM 2. STRIP WIDTH: 650 MM, THICKNESS: 0.1 MM 3. FOIL WIDTH: 650 MM, THICKNESS: 0.1 MM 4. FOIL WIDTH: 680 MM, THICKNESS: 0.06 - 0.200 MM 5. FOIL WIDTH: 650-800 MM, THICKNESS: 0.007 - 0.065 MM

1. BUILT: 1995, MIDI, STRIP WIDTH: 800 MM, THICKNESS: 0.006-0.020 MM; 2. VEB, BUILT: 1972, FOIL WIDTH: 670 MM, THICKNESS: 0.007 - 0,014 MM

Radial drilling machine make VEB Schmölln type BR 40x1250Machine -No: 62/63, built in 1963Technical specifications:Drilling capacity in ST 60- 45 mmDrilling capacity in GGL 20: 60 mmSpindle mount: MK 5Extension of column jacket spindle axis: 300 - 1250 mmDrilling radius: 450 - 1400 mmDrilling depth: 355 mmClamping surface: 1450 x 920 mmDrilling spindle - base plate: 375 x 1375 mmHeight adjustment of the boom: 750 mmLateral displacement of the headstock: 950 mmDrilling spindle speeds: 20 - 1200 rpm.Feed range: 0.063 - 0.63 mm / revConnected load of the machine: 5.2 kWSpace requirement: 2050 x 930 x 3200 mmWeight approx: 3000 kgWith- Cube tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always availa ...

THICKNESS: 0.014 - 0.030 mm, DOUBLED FOIL THICKNESS: 0.028-0.060 MM;

1. 1971, BELL TYPE, TEMP.: 500 °C, COIL DIM.: OD 1400 MM x 1600 MM 2. VEB, 1971, INNER CHAMBER DIM.: 2.5 x 1.3 x 1.5 M, TEMP.: 500 °C

REWINDER STRIP WIDTH: 650-710 MM, THICKNESS: 0.5-0.65 MM,

SKL regenerates turbocharger Manufacturer: VEB compressor construction Bannewitz (DDR) Type: R2 Equipment Nr. 2227-00008 Register-Nr. 256 n max 52000U/min t max 700 ° C m 95 kg Year of construction: 1973

Radial drilling machine make VEB Schmölln Bowes type BR 40x1250/1Machine -No: 691354Technical specifications:Drilling capacity in ST 60:40 mmDrilling capacity in GG 255 mmProjection: 1250 mmDrilling depth: 355 mmClamping area: 1450 x 920 mmRemove drilling spindle - base plate: 375 x 1375 mmBoom height adjustment: 750 mmLateral movement of the headstock: 950 mmDrilling spindle speeds: 20 - 1200 rpm.Feed range 6 x: 0.063 - 0.63 mm/revConnection value of the machine: 4.7 kWRequired space: 2050 x 930 mmHeight of the machine Transport height / max boom above: 2800 /3200 mmWeight approx.: 3000 kgColor greenwith- Dice table- new electricsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for you ...

Capacity: 50 mm x 15.0 mm in manor, drive: by hand, with substructure, 150 kg; good, ready to use

Centrifugal pump Manufacturer: VEB Kyffhäuserhütte Artern Type: KSP 65/180-1,3 Item #: 98605 Year of construction: 1987 Power: 3.8 kW standing on feet very good condition LWH: 560 x 250 x 450 mm

Crane arm for forkliftWeight 220 KGApplicable lifting force: 2500 KGAload: 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mechanic lathe Fabr. VEB CARL ZEISS JENAFabr. -No: 607/84, built in 1984Center height: 150 mm:Circumference diameter over support: 75 mmTip width: 550 mmSpindle bore: 27 mmThread pitches: 0.35 / 0.5 / 0.75 / 1.0 / 1.5 / 2.0Operating voltage / control voltage: 380 V, 220 V, 50 HzRated current of the fuse: 25 AExternal dimensions L x W x H: 1250 x 900 x 1350 mm:With- Underframe- Thread cutting device guide cartridge- large rear shelf made of wood 460 x 990 mm- without tailstockused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hardness tester make VEB Leipzig type HPO 3000Fabr. -No: 309/36 built in 1982Load levels: 3000 kp / 29420 NError limit of load levels: +/- 1%Outreach: 200 mmlargest clamping height: 365 mmTest bench with clamping grooves: 260 x 400 mmOptical measuring device with eyepiece measuring microscope, magn. : 25 timesand micrometer, scale value: 0.01 mmViewing Neckline: diam. 7 mmDial gauge for monitoring the test procedure: Drm. 100 mmMeasuring range: 0 - 5 mm1 pointer revolution: 1 mmScale value: 0.01 mmOperation: electro-hydraulicelec. Connection: 220 V, 60 HzConnected load: 1.2 kVAExternal dimensions L x W x H: 920 x 420 x 1400 mmWeight: 530 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available ...

table length: 1000 mm table width: 1000 mm table load: 1,5 t flange diameter: 700 mm turning speed: max. 0,04 U/min weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,60 x 2,0 x 1,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/min weight of the machine ca.: 230 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal milling machine / horizontal bed milling machineMake VEB HECKERT type FBEW 630x2000Fabr. -No: 353514, built in 1977Technical specifications:Table size: 2000 x 650 mmTable width: 750 mmMachining length X: 2000 mmMachining length Z: 800 mmConnected load: 24 kWExternal dimensions L x W x H: 5300 x 2250 x 2530 mmControl cabinet: 1000 x 850 x 1800 mmWeight approx: 7.5 twith- retractable quill- separate control cabinet- rapid traverse- Emergency stop switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 160 t dayligth: - mm stroke: 8 - 160 mm table surface area: 900 x 900 mm cutting surface: 5500 mm² column travel -side: 560 x 560 mm distance between columns: 950 mm ram adjustment: 125 mm number of strokes - idle run: 42 min-1 table height: 800 mm clamping plate thickness: 100 total power requirement: 18,5 kW weight of the machine ca.: 13,9 t dimensions of the machine ca.: 2,415 x 2,17 x 4,03 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chain milling machine VEB Type KFM Motor power 2.2 kW Table tiltable 30° -0°- 30°, height adjustable, adjustable to left-right Pressure from the front Sword 50 x 150 for chain 12 – 17 mm Dimensions 1100 mm x 1000 mm x H 1620 mm Weight with pallet 511 kg

Tapping machine make VEB Hermann Matern type BSG 5Year 1984Tapping capacity8 spindle speeds: 130 - 1200 rpm.Projection: 340 mmQuill stroke: 40 mmTable size: 370 x 500 mmTable with 3 horizontal T-slotsTable movement up / down manually by handColumn diameter: 120 mmelec. Connection: 220/380 V / 50 HzConnected load: 0.42 kWExternal dimensions:Weight: 270 kgWith:- separate control cabinet with swivel control panel- Emergency stop button- Footrest on the bottom plate- V-belt drive- stepless speeds throughxa0xa0 retrofitted frequency inverter ROfre 899202 E, 0.37 kW- Drill chuck FS 6used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Ultrasonic cleaning bath make VEB Elektromat Dresden type HR 33Fabr. -No: 75 built in 1975Inner dimensions approx.: 300x150x100 mmConnected load: 120 WPower connection: 220 V / 50 HzWeight approx.: 17 kgOutside dimensions approx.: 420 x 190 x 310 mmused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chamber furnace with silicon rod, make ELIOG VEB Römhild, type KO 14Fabr. -No: 85/11010012 built in 1985Technical specifications:Furnace interior dimensions H x W x D: 100 x 150 x 250 mmNominal temperature: 1350 °Nominal power: 4.0 kWHeating-up time 20 ° to 1350 °: 4.92 hours.Cooling time 1350 ° to 675 °: 2.25 hoursWeight of the oven approx: 82 kgExternal dimensions H x W x L: 440 x 475 x 595 mmWith- Thermoelectric transmitter and limit indicator- Control system L x W x H 600 x 460 x 700 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal winch / cable winch make VEB Wilsdruff type 52.3Fabr. -No: 378, TÜ no. 5/4060/139, built in 1990Technical specifications:Tensile force: 3 kN (300 kg)Cable speed: 10 m / minRope diameter: 8 mmPermissible number of rope systems: 4Motor power: 0.55 kWWeight: 140 kgWith- hook- Control buttonsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Rotatable and tiltable dividing head make VEB Mikromat Dresden type MKT 300 SYear of construction 1976Technical specifications:Table surface diameter: 300 mm8 T-slots radial: 10 mmRotation angle range: 360 °Reading possibility: 1 ° / 5 Swivel angle range: 90 degreespermissible load: 30kPHeight of the table when it is horizontalstanding table top: 250 mmExternal dimensions approx: 540 x 550 mmHeight: 240 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic scissor Lift Fabr. VEB TakrafCapacity: 3000 kgPlate size: 2500 x 800 mmPlate height: 185 mmMax. Lifting height: 1060 mmHeight lowest state: 550 mmEngine power: 2.2 kWMax. Pressure: 100 barColor whiteWith- mobile on wheels- each 5 clamping eyelets right and left on the plateused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Lifting, filing and sawing machine make VEB Ruhla type SgHFe 230 / IIIMachine -No: 548Technical specifications:Working range stroke length: 0 - 125 mmInfinitely variable number of strokes: 75 - 355 DH / minTable area: 400 x 400 mmProjection to the middle of the table: 230 mmSwivel angle of the table on 4 sides: 15 °max.thickness of the material to be processed: 100 mmmax.workpiece weight: 50 kgMotor power: 0.75 kWWeight approx: 350 kgDimensions approx: 680 x 680 x 1700 mmwith- tiltable tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double bench grinder manufactured by VEB Leipzig type DS 200/2-No: 399259Technical specifications:Grinding wheel size: 200 x 32 mmMax. Speed: 3000 rpm.Power consumption: 900 W.electrical connection: 220/380 V, 50 HzWeight: 19 kgWith- 2 grinding wheels- baseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Valve cone grinding machine make VEB Magdeburger Armaturenwerke type B 38/20Road no. 07/6461, machine -No: 31/67, built in 1967Technical specifications:Clamping range of the rotatable tool holder: 7 - 16 mmGrinding wheel size: 140 mmSpeed of the grinding wheel: 4500 rpm.V-spindle: 174 rpm.electr. Connection: 220/380 V.External dimensions: 800 x 450 x 1300 mm highused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Extraction unit for grinding and welding chips Fabr. VEB Anton Piller, OsterodeType 1636M80112, make -No: 700988, built in 1982Power: 290 l / minPower: 1.2 kg / m3Intake manifold diameter: 120 mmExtractor pipe diameter: 100 mmDrive power: 2.7 kWExternal dimensions: 600 x 1000 x 1200 mm highused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

heavy gear, angular gear -Translation: 20: 1 -Drive shaft: 35 mm -Output shaft: 2x 22 mm -Weight: 27 kg

Manual screw press manufactured by VEB Morgenröthe, type PSHZ 25Masch. -No: 3682 Year of construction 1963Technical specifications:Max. Pressing force: 25 tTable size: 500 x 430 mmBear size: 500 x 200 mmInstallation height: 430 mmSpindle diameter: 70 mmWeight approx: 950 kgExternal dimensions approx: 1450 x 1450 x 1900 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Power resistor, wire potentiometer, resistor -Price: per piece -Number: 7x available -Weight: 0.2 kg

Water-cooled spot welding machine make VEB Aue type P 2 FManufacturer No .: 88009 Year 1988Rated power at 50% ED: 17 kVAConnected load: 19 kVAElectrode holder force: 200 NOutreach: 500 mmDimensions: 1100 x 360 x 1280 mmWeight approx .: 500 kgWith- Welding time switch- Welding time control- water cooledused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Relay, contactor, semiconductor contactor, contactor -Type: GBR 15.1-12.12 -12 V 6 A 250 V. -Price: per package -Price: complete -Number: 100 pieces -Weight: 1.8 kg

FUW 710 x 250nbsp; Max longitudinal travel X-axe: 420 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 400 mm Max height workpiece: 430 mm Power on spindle: 1,5 kW Admission in millinghead: ISO 40 Max quill travel Z´: 200 mm Spindlespeeds: 45 > 2240 rpm Table size: 710 x 250 mm Length: 1450 mm Depth : 1465 mm Height: 1750 mm Weight: 1300 kg

Relay, contactor, semiconductor contactor, contactor -Type: GBR 10.2-11.12 -12 V 8 A 250 V. -Price: per package -Price: complete -Number in one package: 99 pieces -Weight: 1.8 kg

Cylindrical roller bearings -Type: NUP 2314 -d = inside: 70 mm -D = outside: 150 mm -B = width: 51 mm

Compulsory mixer, agitator, agitator, mixing tool, stirrer -Nominal consumption: 160 watts -Connection: 380 volts -Dimensions: 200/190/H700 mm -Weight: 14 kg

Machine vise, sturdy vise, drill vise -Jaw width: 160 x 60 mm -Clamping depth: max. 130 mm -Dimensions: 480/160/H135 mm -Weight: 38 kg

technical details: - Number of goats: 6 pieces - Number of press beams: 6 pieces - Number of clamping wrenches: 4 pieces - Number of screeds (2,500 mm): 8 pieces - Number of wooden inserts: 6 pieces (1 x divided) Metrics: - Trestle height: 1,000 mm - Trestle width: 1,450 mm (1,410 mm) - Clamping height: 360 mm, minus the screed thickness of 140 mm = 220 mm! - Clamping area: 2,500 x 1,120 mm - Length of the screeds: 2,500 mm (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

straight through inlet wire diameter 2,5 mm finished wire diamter 0,8 mm number of drafts 8 diameter of capstan 400 mm speed -meters/sek 15 m