variable used for sale

DEMONSTRATION MACHINE with slight signs of wear and minor paint marks, technically tested and maintained, full warranty Their robust design, powerful motor and versatility are the hallmarks of the Turnado series lathes. For more than 20 years, they have been among the proven bestsellers of our conventional lathes. The V models are also equipped with an extended, infinitely variable speed range. In combination with the position indicator and the integrated constant cutting speed function, they achieve superior surface quality during face turning. - Center height 280 mm - Workpiece length 1428 mm - Circumferential Ø above bed 560 mm - Infinitely variable speed range - Classic design in stable construction = durable - One-piece, heavy-duty cast iron bed for more stability - 3-axis position indicator with various rotation functions - Adjustable longitudinal stops for autom. S ...

Table cutter, Blixer, make Kronen/Dito Sama/Electrolux Professionnel, type KE 180 S, year 2016, Cutter blender for fast liquifying, blending and chopping, Productivity suitable for 100 - 300 meals per shift., Bowl capacity (total): 17.5 liters - max. 8 kg batches,, variable speed control from 300 to 3000 rpm - 400V,, Rotor (3kW) with micro-serrated knives,, Boiler wall and lid scraper, was used to chop peeled ginger bulbs., Ingredients can be filled in during operation via the spout., Bottom mounted cover for better handling., Metal cover frame to ensure watertightness and avoid leakage., All parts that come into contact with food can be removed without tools., Power: 3000 watts., AISI 304 stainless steel bowl with non-drip spout and handles, easy to use., Scraper with easily removable handle., Variable speed from 300 to 3000 rpm, Membrane button control panel with IP65 protection., Lid  ...

Containers for sweeping, mowing, watering and washing 2-broom system with individual broom control Mower Just over 600 hours ENGINE Perkins 3-cylinder 4-stroke diesel Displacement 1131 cm³ Power 19.7 kW (27 hp) Torque 70.2 Nm Nominal speed 3000 rpm Water cooling Fuel tank capacity 27 l Hydrostatic drive, infinitely variable speed control, four wheels of the same size Maximum speed 27 km/h Hydraulic service brake on the front axle, acts on all four wheels via the hydrostatic drive, mechanical parking brake on the front axle by means of two drum brakes HYDRAULICS 1st circuit infinitely variable up to 33 l/min 2nd circuit up to 58 l/min Hydraulic oil quantity 19 l Lifting capacity front 500 kg WEIGHT Including driver with 75 kg, depending on tyres and equipment Curb weight 1101 kg Permissible total weight 2000 kg Permissible axle load front 1190 kg / rear 1190 kg Drawba ...

- Year 2007 - Double column - Cutting capacities: Round Ø 320 mm Square 320x320 mm - Smallest sawable section ø 10 mm - Minimum single-cut fall 6 mm - Min. cut-off height 15 mm - Programmable automatic feeder, stroke 750 mm, multiple up to 20000 mm. - Load capacity 1000 kg - Variable cutting speed from 20 to 110 mm/mn - Continuously variable cutting pressure - Continuously adjustable material clamping pressure from 20 to 60 bar. - Interchangeable carbide guide - Mechanical blade tension - Cooling system 3 nozzles, flow rate 40L/mn - Lighting system - Full documentation - Very good condition

Berthiez BM 225 sermi-automatic machine Variable speed control for the chuck Variable speed control for the feed Max stroke of ram: 1000 mm Turret can incline 45° amp; 30° Max workpiece diameter: 4500 mm Max workpiece diameter with turning to centre: 4000 mm Max height of workpiece: 2650 mm Max weight of workpiece: 30 ton 69 kW on chuck Weight of machine: 40 ton Chuck dia.: 2257 mm Max turningdia -- passage: 4500 mm Power on the spindle: 69 kW Max longitudinal travel X-axis: 2450 mm Max hight of workpiece Z-axis: 2650 mm Command: Bosch semi-automatic Number of speeds: 0,8 > 125 rpm Weight: 40 ton

Key data: 4000 mm, 1040 mm, 540 mm

4-axis machining centre with automatic tool change for aluminium, PVC or thin-walled steel profiles Max. travel X-axis: 4000 mm Max. travel Y-axis: 1040 mm Max. Z-axis travel: 540 mm Bmg088bwzyi Infinitely variable A-axis from -120° to +120° Windows control with USB ports Infinitely variable speed up to 24,000 rpm Hand-held control unit Minimum Quantity Spraying Tool changer with 12 shelves Clamp detection and clamp displacement Machine is completely enclosed Barcode Scanner Elusoft Dongle Just under 1,500 spindle hours Weight: approx. 3,500 kg

Description: Electric tapping machines for M3 - M16 threads, Angle adjustable. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Thread diameter M3 - M16 metric Variable speed 312 rpm. Working range max. 1100 mm Weight 25kg suitable clamping table Lot 224,265 und 254 weight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 700 x 500 x 300 mm

Description: Electric tapping machines for M5 - M24 threads, Angle adjustable. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Options: Clamping table with grooves Type: FL-WB Thread diameter M5 - M24 metric Speed infinitely variable max. 200 rpm. Working range max. 1200 mm Motor power 1.2 kW Weight 50kg Dimensions L x W x H 740 x 800 x 400 mm Approx. Onsite Dimension. (l x w x h): 740 x 800 x 400 mm, weight approx.: 50 kg

Description: Electric tapping machines for M3 - M16 threads, 7 pcs. quick-change chuck with slipping clutch. Adjustable via display: variable speed, adjustable depth, choice of Main direction of rotation, torque. Documentation in English only. See pictures. Options: - Clamping table with T-slots: 990x700x800mm. - Magnetic base. Thread diameter 16 mm Infinitely variable speed 4 - 200 rpm. Working range max. 1000 mm Motor power 0.6 kW Weight 29kg Approx. Onsite Dimension. (l x w x h): 700 x 600 x 200 mm, weight approx.: 25 kg

Description: Conventional control Clamping length 1500 mm Centre height above slide 350 mm Swing diameter 500 mm Tailstock cone MK4 Quill stroke 45 mm Main spindle speed infinitely variable 1/min Tool speed infinitely variable rpm Total power requirement 4 kW Description: Automatic oscillation of the longitudinal axis Wedge bar chuck Schunk ROTA-S 250-62 Full spindle (100 mm clamping depth in the chuck) Integrated extraction system Work area lighting Various accessories (tailstock centres, polishing discs, etc.) Approx. Onsite Dimension. (l x w x h): 2,800 x 1,200 x 1,800 mm, weight approx.: 2,000 kg

Key data: 1100 mm, 1 , 200 mm

Calibration and fine sanding machine, wide belt sanding machine Kundig Brilliant with electronic segment sanding pad, inclined sanding unit and lacquer sanding. A video of the machine running can be sent on request. Ideal automatic sanding machine for interior finishing companies, also suitable for intermediate paint sanding Bind machine with combination unit and electronic link pressure beam Edge segments can be switched on and off Segment width of pressure beam 35mm Pneumatic Calibration Roller Grooved Rubberized Roller with Grain Compensation Drive motor 11kW, infinitely variable cutting speed 3 - 15 m/s by frequency converter Webbing feed infinitely variable from approx. 3 to 15 m/min Strip blow-off device workpiece-controlled Constant table height approx. 900mm due to adjustment of the upper part of the machine, thus can also be integrated into grinding lines Feed bel ...

Manufacturer : Frewitt Model: MGIF 624 Year : 1975 Type: Stainless steel oscillating arm granulator Material : stainless steel Overall dimensions: 130 X 90 X 250 CM Motor power : 1,5 KW Variable speed, regulator: mechanical Mounted on a stainless steel chassis with 4 wheels Capacity: approx. 1000 kg/h depending on product Technical file available. Manufacturer : Frewitt Model: MGIF 624 Year : 1975 Type: Stainless steel oscillating arm granulator Material : stainless steel Overall dimensions: 130 X 90 X 250 CM Motor power : 1,5 KW Variable speed, regulator: mechanical Mounted on a stainless steel chassis with 4 wheels Capacity: approx. 1000 kg/h depending on product Technical file available.

Description: Table clamping surface: 2100 x 500 mm Max. table load capacity: 2000 kg T-slots, number: 4 pieces T-slots, distance: 100 mm T-slots, width: 20 mm Travel distances: X-axis: 1500 mm Y-axis: 670 mm Z-axis: 670 mm Vertical milling head: Spindle speed (vertical): 35 - 1345 rpm Spindle holder: ISO 50 Projection: 610 mm Distance vertical spindle - table surface: 670 mm Swivel range of milling head: 360 degrees Rapid traverse: X-axis: 3500 mm/min Y-axis: 3500 mm/min Z-axis: 1750 mm/min Feed speed: X-axis (infinitely variable): 20 - 1800 mm/min Y-axis (infinitely variable): 20 - 1800 mm/min Drive power: Main drive: 7.5 kW Feed: 2 kW Coolant pump: 0.55 kW Without further accessories Approx. Onsite Dimension. (l x w x h): 3,300 x 2,380 x 2,750 mm, weight approx.: 7,300 kg

Description: Sourced from an automotive manufacturer due to production changes Serial Number: 109303 Control: Siemens Sinumerik 840 DSL ( composed of 15 NC and 4 spindles) ,  ,Machine-specific plain text messages on screen in German language This  ,machine centre is composed as follows: , 2 Centric clamping divices Actuation: , Hydraulic Swivel table: 180º Hydraulic pressure:  ,approx max 100 bar Station 1 (front) , Spindle units: 2 SEMA spindle units type SE55 - HSK 50 for deburring Spindle Bearing inside diameter: 55 mm Sealing with barrier air and labyrinth Tool holder: HSK50 Drive power: 1,5kw at 3000 u/min Tool cooling Dry machining Drive direct via coupling Manual tool change 2 pcs. 4 spindle head for thread forming 4xm10 with IK and ABS tool holder Drive power AC servo motor, 11.0 kW Spindle speed  ,variable: ,max 3 ...

:FS 2550 ADP | FS 3060 ADP | FS 4080 ADP grinding length:500 | 600 | 800 mm grinding width:250 | 300 | 400 mm Distance table/spindle center:500 (Option 600) | 500 (Option 600) | 550 (Option 650) mm table-size:250x500 | 300x600 | 400x800 mm max. table load:250 | 300 | 400 kg table speed -stepless-:5-25 m/min rapid traverse cross:900 mm/min cross feed on handwheel:0,1/0,5/1 mm/U; 0,001/0,005/0,01 mm/° vertical feed on handwheel:0,1/0,5/1 mm/U; 0,001/0,005/0,01 mm/° vertical rapid traverse:450 mm/min vertical infeed, min.:0,001 mm dimensions of grinding wheel:180x13x31,75 | 355x38x127 | 405x50x127 mm spindle speed:2900 | 1450 | 1450 1/min spindle drive:1,5 | 3,7 | 3,7 kW hydraulic motor:0,75 | 1,5 | 1,5 kW weight of the machine ca.:2350 | 2500 | 3700 kg machine length:2680 | 3000 | 3300 mm machine width:2350 | 2350 | 2650 mm Optimized Structure ? The major parts of KRAFT grinders are manu ...

material width:450 mm material thickness:1,0 - 14,0 mm coil weight:10,0 t coil internal diameter:470 - 520 mm coil external diameter:1100 - 2000 mm no. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mm number of draw-in rolls:2 inlet roll diameter:160 mm min. material width:100 mm speed:15 m/min power requirement:75,0 kW weight of decoiler:6,4 t weight of straightening machine:12,8 t dimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mm straightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450

Overview This 5 HL brewing equipment was built in 2022 by Polish manufacturer Minibrowary. It was only installed and dismantled in the same month. Equipment Brew kettle/mash tun Vertical tank working capacity of 5 hl, mounted on three supports welded to the cylindrical part supports have adjustable feet with a height adjustment of up to 60 mm, allowing for the leveling of the tank. cylindrical tank is entirely made of stainless steel The brew kettle also serves as a mash tun. The purpose of mashing is to dissolve soluble compounds of malt in water and enzymatically break down starch, proteins, and other compounds. Vessel is equipped with a steam heating system, stirrer, and sensor. The mashing temperature is appropriately regulated. It is possible to carry out mashing using infusion and decoction methods. Equipment of the Tank Two-level stirrer Gearmotor 60 rpm with variable speed contro ...

U-trough chute (dimensions: 500mm x 1000 mm long). Magnetic drive: EVS 8 Nr. 1646 with variable speed. On steel construction. Separates round from angular aggregates (rejects).

This is a portioning plant for the bakery industry The machine is made entirely of stainless steel. It has a conveyor belt table special for strand bread plants. Funnel capacity:180kg (Teflon coated). The weight of, This machine is variably available and can be designed according to your wishes. The machine is variable in height and also size of the dough pieces, etc. Optionally also tritt n Mehstreuer can be ordered.

Laska cutter 60 liters Completely stainless steel Bowl in stainless steel Knife shaft infinitely variable speed control With digital display With stainless steel control cabinet Machine without ejector With noise protection cover

Troester 150mm dia PIN extruder Type: QSM150K, Serial no. 8622/80, Year of manufacture: 1980, but refurbished by Troester 2000 (new screw and barrel section) Power roller feed, L/D ratio 16:1 8 rows of 8 pins, fitted with ASEA 212kW DC variable speed motor and controls (1800rpm). Complete with controls etc and in very good condition.

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelmig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

1 office container system approx. 1,500 m2 approximately 55 containers of 20 ft each. Modules Variable room layout 3 floors office building approx. 38 x 20 meters Sanitary facilities, stairwell, connecting passageways, air conditioning Price: on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange a ...

Kat-No 10-1845 in very good condition! With friction gear motor for infinitely variable speed adjustment Stable and mobile application On frame with steering wheels with stopper, foot-adjustable With guide stripfor bottles and cartons transport Dimensions and weight: Bandwidth:8 cm Total width:38 cm Total length: 830 cm Height:100 cm Weight:200 kg Supplement: 895€ for frequency inverters For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor

Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).

Collin Two Roll Lab Mill, Roll size: 150mm dia x 400mm wide Hydraulic nip adjustment, Model: WALZWERKE 150, Year of manufacture: 1988, Power: 19kW Electric roll heating with oil - operating temp 50 to 220 C Each roll variable speed from 0 -30 rpm Manual lubrication, programable controls. In very good condition. Manuals/drawings available.

50,0 kW, max. 7,61 bar, 8,60 m3/min. Oil-free. Air cooled. Variable speed drive. Volume flow 2,6 - 7,6 m3/min.

Membrane filter records Standard welds together the filtration cycle can be shortened by the application of membrane filter records considerably, while the unproductive phase of the pressure filtration is broken off and is substituted with the postpressing. full plastic membrane record with welded together membranes, thereby the easiest Handling and the highest chemical permanence perfect separation of the Nachpressmediums of the filtration product variable material choice membrane corners as ? circle to the membrane movement poor in tension for almost all formats and manufacturers. they need spare parts, accessories, service or servicing for your chamber filter press high-pressure membrane pump or drainage facility? request us. we help you with pleasure.

Material: 1.4301/ stainless steel Engine: 55 kW Content: 4600 ltr Weight: 4600 kg General overhauled. Equipment: - control cabinet - frequency converter variable 450 - 1450 rpm - filtering screen - discharge pump - working platform with stairway, base plate for 1 Euro-pallet, standard railing and grates. Very good condition, like new. You can also get the entire system with all components you need. Write us below!

1 x Werner & Pfleiderer 400mm dia dump extruder, Type: EAE400, Fabrik nr 221284, Werk nr 416295, Year: 1985, double hydraulic crammer feed, feed section 965mm wide, L/D ratio 8:1, with 235kW DC variable speed motor, Sheeting head to produce up to 1000mm wide sheet. Complete with controls and hydraulics etc.

Rotary screw air compressor Atlas Copco GA 315 VSD FF 290kW, 9,95 bar, 50,50 m3/min. Variable speed drive. With built-in compressed air refrigerant dryer. Volume flow 12,4 - 50,5 m3/min. at 7 bar

Cat. No. 13-0029 in a very good condition Testing water by 22°C back pressure at 1 bar pressure: 0,4 bar capacity: 7800 l/h motor: 0,55 kW Connection: iniet: DN 65/outlet: DN 50 according to DN 32676 can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Length: 60 cm 45 cm Width: 25 cm 21 cm Height: 74 cm 40 cm Weight: 40 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Compressed air refrigerant dryer Atlas Copco FD 1000 VSD A 13 bar, 60 m3/min. Variable speed drive. Volume flow 0-60 m3/min.

1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.

Compressed air refrigerant dryer Atlas Copco FD 1250 VSD A 13 bar, 75 m3/min. Variable speed drive. Volume flow 0-75 m3/min.

Cat-nr. 13-0211 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 4,0 bar capacity: 1.500 litres/h Motor: 0,55 kW Connection: inlet/outlet: DN 40 according to DIN 32676 - can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Height: 73 cm Length: 141 cm Width/Depth: 45 cm Weight: 56 kg The pump is tested; 100% function guarantee! For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Rotary screw air compressor Atlas Copco GA 132 VSD FF 132 kW, 9,80 bar, 26,10 m3/min. Variable speed drive. With built-in compressed air refrigerant dryer. Volume flow 5,6 - 26,1 m3/min.

Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale

1 x Bridge 84in x 26in/22in dia two roll mill, manual nip adjustment, Cored rolls with rotary joints fitted, Bronze bush type sleeve bearings, with Hagglunds hydraulic drives fitted to each roll, 160kW motor with pump to each roll for variable roll speed/friction. Drives fitted in 1988 (Marathon type). Complete with controls etc and in good working condition. Fabricated bedplate.

Main drive - spindle motor at 2450 RPM power - 4,5 kW spindle speed within four gears - infinitely variable speed range 20-4000, tool holder horizontal and vertical ISO 40 tool CLAMPING hydromechanisch 1200 daN, Quill stroke vertical fur 80 mm feed drive - single DC motors 1-2000 mm / min feed force in all axes each axis 5400 N, rapid traverse in all axes 5 m / mon workspace - along x axis 500 mm, cross y axis 360 mm, vertical z-axis 400 mm measurement - measurement of X, Y, Z - direct, resolution 0.001 mm, input gauge 0.001 mm, display step 0.005 mm, resolution 0.001 mm table AUFSPANNFLaeCHEN of rigid 4.Achse angle table 800 x 390 mm number and distance of T-grooves, wide T-slots 6/63/14 h7 NC rotary table 30 swivel 4.Achse - diameter. 380 mm control train control HEIDENHAIN TNC 115 / TNC 355 - screen screen - control SIEMENS 3 M4 810 M Kuhl installation - lubrication coolant - rinsing  ...

1 x Francis Shaw model K1 Intermix MK4, Installed new in 1991, fully maintained and checked over by HF in 2005. Net chamber volume: 5.5litres, pneumatic hopper, hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor and controls. Castell Key interlock system Complete and in excellent condition. Chamber and rotors are like new! O/a dimensions: 3m x 1.2m. Can be seen working. All manuals/documentation available.

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls with ...

Rotary screw air compressor Atlas Copco GA 180 VSD 180 kW, 12,50 bar, 28,90 m3/min. Variable speed drive. Volume flow 5 - 28,9 m3/min.

Technical data: engine: 7.5 kW / 400 V weight: 1.8 t mole lid pressure: 20 t ground rams pressure: 40 t working pressure: 220 BARS filling box dimension (L x B x T): 81.5 cm x 35 cm x 51 cm parcel dimension (L x B x material amount): 35 cm x 20 cm x variable length (material amount) Presszyklus: approx. 1 minute dimensions (L x B x H): 2.45 metres x 1.20 metres x 1.40 metres CE norm

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

Rotary screw air compressor Atlas Copco ZR 90 VSD FF oil-free 90 kW, 8.75 bar, 15.50 m3/min. with built-in compressed air adsorptions dryer. variable speed drive.