variable used for sale

De STEFANI edge polisher model MVT1000: - 1 tilting tape, for straight and shaped edges - variable belt speed with potentiometer on the panel - forward track with variable speed - manual lifting of the presser

325 Liter CFS / Krämer + Grebe Vacuum Cooking Cutter Type: CMV 325 infinitely variable blade speed infinitely variable mixing process Load for 200 litre cutter wagons Ejector built-in vacuum pump Cooking equipment completely stainless steel used as by the customer not outdated, ready to use

Beading machine Prinzing Type SME 200/11 Year of construction 2006 Projection 1100mm Connected load 5,5KW sheet thickness 1.5mm VA Control Siemens Siematic OP7 Extras: -Parallel lining of the top roll with rolling bearing working shafts -infinitely variable motor for drive -motorized delivery of the harmonic, infinitely variable -Feed control for automatic with sensor control Sheet metal guide device in table design Total weight 6700kg The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

Technical details Manufacturer: GEA Niro Soavi Model: Ariete NS3110H Type: Piston homogenizer Viscosity : < 500 cP Maximum particle size: up to 500 microns Operating temperature: < 90?C Execution : Sanitary / aseptic Max. capacity: approx. 15,000 L/h (variable capacity from 5,500 to 15,000 L/h) Flow rate: variable / fixed / multiple Maximum working pressure: 200 bar Maximum back pressure: 5 bar Minimum in feed pressure range: 4 to 6 bar Motor power (supply required): 110 kW Power supply: 3 ph / 400 V / 50 Hz Water supply: min 2 bar Air supply : min 6 bar Product temperature : < 90?C Cleaning temperature : < 140?C Cleaning cycle : 30 min Sterilisation temperature : 140?C Number of stages / homogenisation level: 2 Plunger diameter: 85 mm Plunger stroke. Piston stroke : 100 mm Options added by the manufacture ...

Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...

TIG welder NIMAK Type GS 200 W Fabr. No. 26642 Year of construction approx. 1983 Power 200 Amp. = 60% ED 150 Amp. = 100% ED Adjustment range of power infinitely variable Mains connection 380 Volt, 50 Hz, 32 Amp. Plug- 5 meter TIG hose packet - HF ignition - infinitely variable current control and current rise - connection for electrode welding- only direct current - water-cooled- shielding gas pressure reducer Space requirement L x W x H 900 x 590 x 1000 mm Weight approx. 200 kg good condition; used

Drilling capacity in steel 32 mm Drilling capacity in cast iron 36 mm Spindle holder MK 3 Spindle speeds infinitely variable by hand lever 140 - 1400 rpm Table size 500 x 360 mm Drilling depth 150 mm Column diameter 125 mm Projection 300 mm Drive power 1.5 kW Weight approx. 350 kg mechanical feed by head pressure Specifications: Drilling capacity in steel 32 mm Drilling capacity in cast iron 36 mm Spindle holder MK 3 Spindle speeds infinitely variable 140 - 1400 rpm Table size 500 x 360 mm Drilling depth 150 mm Column diameter 125 mm Projection 300 mm Drive power 1.5 kW Weight approx. 350 kg mechanical feed at the push of a button Feed speeds: 0.1 - 0.16 - 0.25 mm/revolution Thread cutting device coolant equipment, Drill table lighting Operating instructions Connection cable 16 A

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 50600 € : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 M : 3 : 20 - 100, 80 - 400, 400 - U/Min : 120 : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3600 mm : 1500 mm : 1650 mm : 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a ",constant cutting speed", (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer&apos,s request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (con ...

Dorries Model SD250 Vertical Boring Mill/ Turret Lathe Year: 1978 Flush Floor Diameter of 4-jaw chuck: 98.5"/ 2501 MM Maximum swing, side head down: 110"/ 2794 MM Height under rail: 85"/ 2159 MM Table Load Capacity: 110,000 Lbs Cross travel of ram head: 61" Vertical travel of ram head: 42" Maximum Capacity Under Tool: 70" Side head: none Table speeds: 112 RPM Variable Main drive motor: 75 HP Current Electrical Arrangement: 480/3/60 ¯ Complete With: 98" 4 Jaw Chuck (1) Swiveling Ram Head (1) 5 Position Swiveling Turret Head Full Pendant with digital readout Baldor Variable Drive Coolant Tank Flush Floor Threading Video Available

Machine Details Stock number 1105-03802 Machine type machining center - vertical Brand MIKRON Type VCP 600 Year of construction 2010 Control type CNC Control heidenhain 430 Storage location FRANCE Country of origin SWITZERLAND Delivery time ready for shipment Freight Base EX WORK Technical details x-travel 600 mm y-travel 450 mm z-travel 450 mm Control heidenhain 430 Table clamping surface 850 x 530 mm Table load 0.40 t Number of T-slots 6 T-slots - distance 63 mm T-slots - width 14H12 mm Spindle speeds - infinitely variable 100 - 20,000 rpm Spindle motor 12,00 kW Tool holder HSK-A63 Tool changing device 30 Tool diameter 90 mm Tool diameter with 2 free spaces 110 mm Tool length - max. 250 mm Tool weight max. 6.00 kg Chip-to-chip time approx. 7.00 sec Feed infinitely variable 0 - 22,000 mm/min Rapid traverse 22.00 m/min Feed force X/Y/Z axis 5000 N Tota ...

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

Thermo shrink tunnel BECK type HV 601HPLS - Used equipment built in 2008 The high-performance shrink tunnel is built in an energy-saving design. He is from the The heating system and the adjustment options are designed so variably that they can be covered with foil. coated products of various contours can be shrunk cleanly. Functioning: The thermal shrink tunnel works with separate blowers to create a separately adjustable top and bottom heat. The special insulation technology reduces heat loss by radiating heat, reduces the power consumption by up to 20% and thus increases the Efficiency of the machine considerably. The shrink temperature is controlled by a digital control and precisely maintained even at high throughputs. The heating units at the top and bottom are removable; the thermal shrink tunnel is in case of maintenance available again after a few minutes. The ...

faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2200 mm range L-W-H: 7730 x 6240 x 6700 mm control: Typ 840 D sl voltage: 3 x 400 V frequency: 50 Hz turning speeds: 0,8 - 40 U/min max. turning diameter: 3500 mm total power requirement: 51 kW weight of the machine ca.: 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports S ...

Machine Details Stock number 1105-03839 Machine type machining center - vertical Brand CHIRON Type FZ 15 W Year of construction 2004 Control type CNC SIEM 840D controller Storage location FRANCE Country of origin france Delivery time ready for shipment Freight Base EX WORK Technical details x-travel 550 mm y-travel 400 mm z-travel 425 mm SIEM 840D controller Table clamping surface 2x 660 x 400 mm Tool holder ISO SK 40 Spindle speeds - infinitely variable 20 - 12,000 rpm Feed infinitely variable 0 - 60,000 mm/min Rapid traverse 60 m/min Feed force X/Y-axis 5,000 N Feed force Z-axis 10,000 N Tool magazine: 20 Tool diameter max. 65 mm Tool diameter with 2 free spaces 150 mm Tool length - max. 220 mm Spindle diameter in the front. Bearing 70 mm Torque at the spindle max. 180 Nm Distance spindle/table 280 - 705 mm Spindle/stand distance 480 mm Milling capacit ...

Brand Martin Type T75PreX Year of construction: 2021 New exhibition MA7502050 sliding table saw T75 PreX with large screen 10.4" touchscreen T75P05-b "Option package 2, consisting of: Infinitely variable speed control 9.5 kW T7503-a Electromotive positioning of the parallel fence T7511-a Scoring system ""PreX"" 3-axis - scoring unit T7523-a" T7503-a engine power 9.5 kW (13 hp) S6-60%, with infinitely variable speed control for the main saw blade, adjustable from 2,000 - 6,000 rpm; modern, maintenance-free passive cooling of the inverter T7508/4-a: trolley: 3,300 mm T7509/3-a cutting width: 1350 mm T7511-a "Electromotive positioning of the parallel fence Measurement specification and digital dimension display in the control system; Ruler can be folded, position queried via sensor; complete in ...

Mayrhofer cross-cut saw Capping height: 20 cm Total length: 7,8 Meter with 6 saws 6 x Motor 5,5 kW Type H90 0 pcs saw variable (+-20 cm) 3m saw fixed 4m saw fixed 4.5m saw fixed 5m saw fixed 6m saw variable (+- 20 cm) very good condition - immediately available from stock Location: Austria, 3525 Lugendorf

30° gt; 120° cap steel: 6 mm cap stainless steel: 4 mm Capacity : 200 x 200 x 6 mm Fixed angle -- variable angle: variable (30° > 120°) Workspace: 710 x 570 mm Length : 1400 mm Depht : 800 mm Height: 1100 mm Weight: 1550 kg

roll diameter: 420 mm throat: 400 mm workpiece height: 285 mm cutting speed: 15 - 1400 m/min table surface area: 500 x 500 mm saw band length: 3200-3400x6-20x0,9 mm work height max.: 955 mm voltage: 380 V total power requirement: 1,5 kW weight of the machine ca.: 550 kg dimensions of the machine ca.: 950 x 750 x 1820 mm Machine from a maintenance workshop good condition with special accessories () Furnishing: - Robust electro-motor vertical band saw machine - Frequency-controlled, infinitely variable saw blade drive Infinitely adjustable via handwheel - Pole-changing drive motor - analog speed display - hydraulic, stepless table feed - Infinitely variable height adjustment of the belt guide, via hand wheel - electrical belt tension monitoring - IDEAL saw band welding machine model BSO, with shears & grinding motor - manually swiveling support table - Machine base - Cooling device - Em ...

dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner � ...

Petzing & Hartmann / Pehaka US 5 - N, vertical band saw Two-stage band saw motor Stage 1 speed 15 - 220 rpm (infinitely variable Stage 2 Speed 150 - 2200 rpm (infinitely variable) Work table 750x700mm with stop Work table swivel / tilt Passage - column / band saw 510mm Swxmlk Saw passage (height) approx. 420mm Ideal - strip welding device Emergency/ Off Speed indicator Saw blade - length 4100x3-20mm Dimensions: LxWxH 1.4x1x2.3 meters Weight 450Kg

Univ. NC tool milling machine KUNZMANN type WF 3/4 machine no. 341020 Year of construction 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle mount SK 40 Spindle speed 40 - 2500 rpm. Feeds X, Y and Z- axis 0 - 1000 mm/min. infinitely variable rapid traverse X, Y- axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Vertical quill adjustment 60 mm Drive power spindle motor 3 KW Mains connection 400 volts, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle speed over 2 gear stages and infinitely variable via frequency converter - Vertical milling head +/- 90 swivelling - hydr. Tool clamping - fixed angle table - control cabinet fixed to the machine - coolant tank with pump opposite - central lubrication - lighting space requirement L x W x H 1800 x 1800 x 1900 mm weight 1300 kg good condition; used

Workpiece dimensions: , mm Total length: 5500mm mm Feed speed: 37 m/min. Workpiece return RP-S NT --------------------------------- Return device with tubular steel construction with high resistance to guarantee of robustness and solidity over time. A powered conveyor belt for the Workpiece transport to the operator. The conveyor belt is equipped with brakes equipped with wheels. 9 rolls processing width 220 mm Length 2500mm adjustable height 900 mm Roller diameter 60 mm with adjustable Inclination 0°-15°, variable center distance, at least 200 mm Unloading chute depth 900 mm 9 inclined idler roller aggregates with adjustable width and variable center distance from at least 200 mm Driven belt with a width of 300 mm Length 5500mm Motor 0.37 KW speed 37 m/min --------------------------------- (Technical information according to the manufacturer - without guarantee! The data for this ad ...

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

Specifications: Tool holder: SK 40 Travel X/Y/Z: 500 / 400 / 400 mm Speed range, infinitely variable: 20 - 450 min-1 Feeds: 0- 5000 mm/min Clamping area: 700 x 500 mm Engine power: 17 kVA Connection: 400 V, 32 A Table swivel: 360° Weight, approx.: 3000 kg Dimensions (WxDxH), approx.: 2630 x 1700 x 2150 mm Equipment: - Control: TNC 124 Heidenhain - Infinitely variable speed control - Mechanical desktop clamping - Rapid traverse - Spray gun for spill flushing - 3 electronic handwheels (X,Y,Z) - 7 tightening bolts - Emergency stop push button - Eletr. Angle display for swivel rotary table, angle measurement in B-u. C-axis - Coolant device incl. pump -CE

NEW ex works Standard equipment - Threading device - Control panel with OLED display - Robust, high-quality drill head hood - LED lighting - Quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - in tapping mode: right-left SPECIFICATIONS Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1= M30x3,5 / R2= M24x3 / R3= M36x4 Spindle MK IV Drilling depth: 160 mm Projection: 300 mm Column diameter: 140 mm Usable table area (W x D): 590 x 450 mm Digital speed display Digital drilling depth  ...

Second-hand machine - Year of construction 2005 Cleaned & functionally tested expected to be available from mid-September 2023 = only 2622 operating hours within approx. 18 years (as of 04.07.2023) This corresponds to a work performance - of only approx. 145 working hours per year or approx. 12 working hours per month! - with 3 hours of operation: less than 900 working days or 3 years in total = In the 4000 TR/G-S version, the Mini Rex has two different large stamping strips, whereby round-knitted with a machine, as well as angular/cushion-shaped dough pieces can be made. Features of the Mini Rex 4000 head machine: - Hourly output: 2,040 - 3,960 pcs at 17 - 33 strokes / min, infinitely variable - Built in 2005 - Extended product range with 2 weighing punches (round & square) - Best effective results via infinitely adjustable active eccentric - with dough hopper and ...

Limit sensor, for variable area flow meter, changeover, 4 pieces GEMÜ type: 1250 1250000Z00AT1 88310502 Output signal: 1 x reed contact, bistable, changeover contact Switching capacity: 250 V AC, 0,, 2 A, 10 W Material: PBTP ( polybutylene terephthalate ) Cable gland: PG 9 Can be clamped on for GEMÜ 815 variable area flow meter, 817, 830, 832, 835 and GEMÜ 865, 867, 880, 885 DN 25 Other quantities on request ! New ! Dimensions ( limit sensor ): 62 x 34 x 42 mm Dimensions ( packaging ): 150 x 115 x 70 mm

Limit sensor, for variable area flow meter, maximum contact, 4 pieces GEMÜ Type: 1251 1251000Z00000 88029062 Output signal: 1 x reed contact, bistable Switching capacity: 250 V AC, 1,, 0 A, 100 W Material: PBTP ( polybutylene terephthalate ) Cable gland: PG 9 Can be clamped on for GEMÜ 815 variable area flow meter, 817, 830, 832, 835 and GEMÜ 865, 867, 880, 885 DN 25 Other quantities on request ! New ! Dimensions ( limit sensor ): 62 x 34 x 42 mm Dimensions ( packaging ): 150 x 115 x 70 mm

Limit sensor, for variable area flow meter, minimum contact, 4 pieces GEMÜ Type: 1252 1252000Z00000 88029063 Output signal: 1 x reed contact, bistable Switching capacity: 250 V AC, 0,, 2 A, 10 VA Material: PBTP ( polybutylene terephthalate ) Cable gland: PG 9 Can be clamped on for GEMÜ 815 variable area flow meter, 817, 830, 832, 835 and GEMÜ 865, 867, 880, 885 DN 25 Other quantities on request ! New ! Dimensions ( limit sensor ): 62 x 34 x 42 mm Dimensions ( packaging ): 150 x 115 x 70 mm

Description: Suitable for manual grinding of cutting, milling and drilling tools such as end mills, shell end mills, Radius milling cutters, end milling cutters, thread taps, step drills, etc. on the circumference, end face and spiral. Accesories : optical length and angle measuring device with measuring microscope cylindrical grinding device 1 dressing device for radii 3 grinding wheel guards 3 cover discs 2 dividing discs 10 grinding wheel mounts, Workpiece diameter between the centers: 238 mm, grinding stroke max.: 110 mm, Grinding stroke max.: 190 mm, Vertical adjustment of grinding head: 325 mm, Cross adjustment tool slide: 100 mm, Grinding head carrier swivelling: 360 °, Vertical adjustment of the grinding head: 325 mm, Tool carrier swivelling: 360 °, Grinding spindle speeds infinitely variable from: 2,000 - 10,000 rpm,, Connected load: 2.0kW (400V/50Hz), Dimensions L x W x H: 11 ...

Deck trolley, all-purpose trolley, tool trolley PAGUS 750 x 540 x 1400 mm 4 shelves, storage space: length: 610 mm, width: 410 mm, edge height: 35 mm stack height variable 4 wheels steerable, 2x with brake 2 handles, Height variable used, tested ! Dimensions: 750 x 540 x 1400 mm

Cable support, hose support, 7 pieces PAGUS max. Ø 85 mm 5x fixed height: 250, 280, 420, 500, 510 mm base plate: 125 x 125 x 3 mm 1x variable height: 210 - 380 mm 1x variable height: 310 - 480 mm Base plate: 100 x 100 x 20 mm Material: Steel used, tested ! Dimensions ( packaging ): 600 x 260 x 120 mm

Technical data baler: Manufacturer BOA Recycling Systems B.V. Type Impress D225-165-D-5V/5H-1.6 Year of manufacture 2022 Operating hours 1,486 hours, as of June 2023 Pressing force main press 2,211 kN or 211 t Specific pressing force 17.5 kg/cm² Working pressure 280 bar Press stroke main hydraulic cylinder 2,900 mm Average cycle time 23 seconds Dimensions of feed chute 1,620 x 972 mm Volume of press chamber 4.4 m³ Bale dimensions 1,100 x 1,200 mm, length variable Drive power 3 x 45 kW Total connected load 250 kW, 500 A Tying system 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates with a bulk density of 30 kg/cbm up to 20 t/hour Bulk density of 60 kg/cbm up to 33 t/hour Bulk density of 100 kg/cbm up to 46 t/hour Bulk density from 150 kg/cbm up to 56 t/hour Bulk weight from 200 kg/cbm up to 69 t/hour Bale weights up to 1300 kg, depending on material Hydraulic oil tank ...

Technical data baler: Manufacturer BOA Recycling Systems B.V. Type Impress D225-165-D-5V/5H-1.6 Year of manufacture 2022 Operating hours 1,568 hours, as of June 2023 Pressing force main press 2,211 kN or 211 t Specific pressing force 17.5 kg/cm² Working pressure 280 bar Press stroke main hydraulic cylinder 2,900 mm Average cycle time 23 seconds Dimensions of feed chute 1,620 x 972 mm Volume of press chamber 4.4 m³ Bale dimensions 1,100 x 1,200 mm, length variable Drive power 3 x 45 kW Total connected load 250 kW, 500 A Tying system 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates with a bulk density of 30 kg/cbm up to 20 t/hour Bulk density of 60 kg/cbm up to 33 t/hour Bulk density of 100 kg/cbm up to 46 t/hour Bulk density from 150 kg/cbm up to 56 t/hour Bulk weight from 200 kg/cbm up to 69 t/hour Bale weights up to 1300 kg, depending on material Hydraulic oil tank ...

One (1) PER-FIL® Industries Model MF MICRO-FILLER, portable Auger Filler. The MF is designed for safe, accurate and dust-free dispensing of customer's product nto designated container. STANDARD FEATURES: Variable speed auger and agitator drive system, 0.5 hp permanent magnet, totally enclosed and non-ventilated motor with heavy duty gear reducer. 12" diameter, 20 liter stainless steel hopper mounted with quick disconnect hand knobs. Hopper is positioned with locating pins for convenient removal and positive assembly. Stainless steel NEMA 4X dust and water proof electrical enclosure securely mounted to the frame of the filler. Enclosure includes PLC and touchscreen operator interface for simple adjustment of all filler parameters and allows operator to save settings as a "RECIPE." Up to 30 recipes can be stored in the operator interface. Variable speed auger drive control ...

Key data: 360 mm, 4400 mm, 430 mm

suitable for mitre cuts on one side Cutting range at 90°: approx. 360 mm; flat 430 x 360 mm Cutting range at 45°: approx. 305 mm; Cutting range at 30°: approx. 215 mm Cutting speed 12 - 115 m/min infinitely variable Infinitely variable control of the cutting speed Hydraulic material clamping Hydraulic cutting pressure regulation Chip brush Saw blade 4400 x 32 x 1.1 mm Upper dead center of the saw bar can be selected via adjustable limit switch Connected load approx. 3 kW Incl. coolant device, minimum quantity lubrication, 2 x roller conveyor each approx. 3 m, material stop, Manual, CE Conformity

Manufacturer: Maskiner, Type: LPFK 2P 400 HKM, Year: 1997, Steuerung : Programm, Foil wrapping machine mm: yes, Foil stations: 2, Intermediate conveyor mm: yes, Shrinking tunnel mm: 300, Auslaufband mm: no, Electrical power shrinking tunnel kW: ca 30, Gesamtanschlusswert kW: 30, Foil 1 width mm: variable, Foil 2 width mm: variable, Through running hight mm: 150, Working width mm: 220, Year :1997

• Rotor length 250 mm • Rotor Ø 115 mm • Stainless steel version • Opening inlet 240 x 240 mm, opening outlet 220 x 220mm • Drum cover for drum Ø 630 mm • Speed infinitely variable by variable speed gear • With 1 sieve mesh size approx. 2 mm • Without control cabinet • Drive 400V/50Hz

Key data: 1300 mm, 2 , 160 mm

Wide belt sander Bütfering SWT 525 QC Optimat Working width 1350 mm Number of aggregates 2 1. Transverse grinding unit with -Inside running felt ribbed tape - infinitely variable, frequency-controlled cutting speed 2 – 16 m/s. -an electromagnetic segment pressure bar for high tolerance compensation for fine and varnish sanding -Belt blow-off device, workpiece-controlled 2. 1 combined grinding unit with: • Automatic aggregate locking - infinitely variable, frequency-controlled cutting speed 2 – 18 m/s. -an automatically adjusting, profiled steel contact roller, with grain compensation for calibration -an electromagnetic segment pressure bar for high tolerance compensation for fine and varnish sanding -Grinding insert 110 mm wide • Co-rotating and counter-rotating device of the abrasive belt -Strip blow-off device, workpiece-controlled (one blowing rod each for co-r ...

Herma132M HC wrap-around labeling machine for vials, etc. (400/min.) Herma132M HC wrap-around labeller (400/min.), with infeed rotary table suitable for PP-trays with inner dimensions of 428 x 244 x 42 mm (LxWxH), Videojet DataFlex 6530 thermal transfer printer (up to 3 lines each of max. 18 variable alphanumeric characters) for printing the variable data on the labels (expiry date, batch no., etc.) with camera print and code checking, luminescence sensors for checking the presence of the labels with reject system, Siemens IPC 277E 12 color touchscreen, Siemens S7-1500 PLC, includes format parts for 2R vials (diameter of 16 +/- 0.25 mm x height of 35 +/- 0.5 mm) and 3 ml. vials (diameter of 16.25 +/- 0.15 mm x height of 35 +/- 0.5 mm), vials are leaving the labeller at 90° feeding (in as-new” condition)

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Dietz type: DR80/b/4n -Motor power: 0.75 kW -Speed range: 12-67 rpm -Motor: adjustable -height of the shaft axis: 120 mm -Number: 1 piece of motors available -Price: per piece -Drive shaft: Ø 25 mm -Dimensions: 415/200/H400 mm -Weight: 35 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gearbox Nord type: SK01R100L63L/4 -Motor power: 0.18 kW -Speed range: 68-340 rpm -Motor: adjustable -height of the shaft axis: 110 mm -Drive shaft: Ø 12 mm -Construction: B5 -Number: 1 piece of motors available -Price: per piece -Dimensions: 455/300/H210 mm -Weight: 20 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gearbox Nord type: SK01R-63L-4-100LU -Motor power: 0.18 kW -Speed range: 68-340 rpm -Motor: adjustable -Height of shaft axis: 102 mm -Drive shaft: Ø 20 mm -Construction: B3 -Number: 4 motors available -Price: per piece -Dimensions: 465/180/H310 mm -Weight: 20.55 kg

variable speed geared motor, variable speed geared motor, electric motor -Motor power: 2.2 to 4.4 KW -Speed range: 250 to 800 rpm (speed adjustment by hand) -Drive shaft: O 32 mm -Number: 1x gear motor available -Weight: 300kg

Variator Pulley, Vario Adjustment Pulley, Vario Belt Pulley, PIV Gear, Vario Gear, Variable Speed Pulley, Variable Pulley, Expansion Pulley, V-Belt Pulley Adjustable -Manufacturer: VEB, Vario belt pulley -Outer pulley diameter: 220 mm -Inner diameter: 22 mm -Dimensions: Ø220 x 260 mm -Weight: 8 kg

Variator Pulley, Vario Adjustment Pulley, Vario Belt Pulley, PIV Gear, Vario Gear, Variable Speed Pulley, Variable Pulley, Expansion Pulley, V-Belt Pulley Adjustable -Manufacturer: VEB, Vario belt pulley type E 502.22 -Outer pulley diameter: 220 mm -Inner diameter: 22 mm -Dimensions: Ø220 x 140 mm -Weight: 5.4 kg

variable speed geared motor, variable speed geared motor, electric motor -Manufacturer gearbox: Ferri type F30/R -Manufacturer engine: MGM Type C 71D4 -Motor power: 0.73 kW 1370 rpm -Speed range adjustable: 50-250 rpm -Drive shaft: Ø24 x 50 mm -Construction: B3 -Dimensions: 490/260/H190 mm -Weight: 17 kg

variable speed geared motor, variable speed geared motor, electric motor -Manufacturer gearbox: Prym type L8-U16 -Manufacturer engine: AEG type AM 90 S 8/4 -Motor power: 0.37/0.7 kW 680/1370 rpm -Speed range adjustable: 10 to 100 rpm -Drive shaft: Ø24 x 50 mm -Construction: B3 -Dimensions: 540/270/H210 mm -Weight: 37 kg

Variator pulley, vario timing pulley, vario pulley, PIV gearbox, vario gearbox, variable speed pulley, variable pulley, expansion pulley, adjustable V-pulley -Variator pulley: Vario pulley -Outer pulley diameter: 220 mm -Diameter inside: 25 mm -Number: 1x pulley available -Price per piece -Total dimensions: 360/230/H220 mm -Weight: 12 kg/pc.

Variator pulley, vario timing pulley, vario pulley, PIV gearbox, vario gearbox, variable speed pulley, variable pulley, expansion pulley, adjustable V-pulley -Variator pulley: Vario pulley -Outer pulley diameter: 120 mm -Diameter inside: 12 mm -Number: 4x pulley available -Price per piece -Total dimensions: 200/160/H120 mm -Weight: 2.8 kg/pc.