variable used for sale

Bütfering Optimat SCO 113 - Diamond + LACK CONSTANT TABLE MACHINE / autom. Head delivery Stable frame construction with a constant workpiece inrun height of 900 mm by adjusting the upper part of the machine. Workpiece thickness settings from 3 - 160 mm 1. Aggregate comb. Steel contact roller and electronically controlled segment sanding pad unit CPS II system with variable grinding pressure 2. Aggregate Cleaning - Brush Unit Stable vacuum table for a large surface Large transport securing by means of suction clamping device - high-performance blower with control flap integrated in the machine. Table segmentation that can be activated via the terminal Extendable workpiece support Working width 1350 mm additional table in the outlet - foldable Feed speed infinitely variable 2.5 - 13 m/min. LACQUER SANDING PACKAGE: Vacuum table with lacquered carpet and vacuum generator 3 kW I ...

variable speed geared motor, variable speed geared motor, electric motor -Manufacturer Motor Nord Type: SK63L/4 -Manufacturer of variable speed gear North type: SK01-R080U-63-L/4 -Motor power: 0.18 kW -Speed range: 55-275 rpm -Motor: adjustable -height shaft axis: 102 mm -Drive shaft: Ø 20 mm -Construction: B3 -Number: 1 piece available -Dimensions: 350/175/H305 mm -Weight: 13.9 kg

variable speed geared motor, variable speed geared motor, electric motor -Manufacturer variable speed gear: Lenze type 11 710 03 00 -Manufacturer Engine Emod type: 71L/8 -Motor power: 0.18 kW -Speed range adjustable: 80-460 rpm -Drive shaft: Ø14 x 28 mm -Construction: B3 -Number: 1 piece of motors available -Dimensions: 380/210/H230 mm -Weight: 16.1 kg

Gear motor, electric motor, electric gear motor, variable speed gear motor, variable speed gear motor -Manufacturer: Lenze, variable speed geared motor -Gearbox: Type 11 592 03 06 0 i= 1:6 -Speed range adjustable: 14.3 -2.4 rpm -Engine: Hanning Type 7C4-141 -Power: 0.37 kW / 1390 rpm -Shaft: Ø 25 x 65 mm -Construction: B3 -Dimensions: 560/250/H290 mm -Weight: 37 kg

Gear motor, electric motor, electric gear motor, variable speed gear motor, variable speed gear motor -Manufacturer: Nord, variable speed geared motor -Gear: Type SK 12-RV10-71 L/4 i= 53.84 -Speed range adjustable: 4.6 - 33 rpm -Engine: Nord type SK 71L/4 -Power: 0.37 kW / 1380 rpm -Protection class: IP54 -Shaft: Ø 25 x 50 mm -Construction: B3 -Dimensions: 580/200/H255 mm -Weight: 27 kg

Gear motor, electric motor, electric gear motor, variable speed gear motor, variable speed gear motor -Manufacturer: Lenze, geared motor -Variable gear: Simplabelt type 11.342.18.10.2 188-89 rpm -Gearbox: Type 12.602.10.1.3D -Engine: VEM type KMER 80 G 4 -Power: 0.75 kW / 1380 rpm -Protection class: IP54 -Shaft: Ø 25 x 50 mm -Construction: B3 -Number: 2x gear motor available -Price per piece -Dimensions: 550/190/H360 mm -Weight: 27 kg

Vacuum filling machine Vemag Robby Type 136 Filling, portioning, linking PC-Control AC Servo drive Including linking device Filling performance: depending on the goods up to 2700 kg/h Portioning weight: 5-60000 g - variable adjustable in steps from 0.1 g or 1 g Portioning speed: up to 650 portions per min (depeding on product, casing and portioning size) Speed of rotation: 0-100%, variable adjustable Linking: 0-10, variable adjustable

Vacuum filling machine Vemag Robby 2 Type 135 Filling, portioning, linking PC-Control Including loading device for 200 ltr. bins Including linking device Filling performance: depending on the goods up to 3000 kg/h Portioning weight: 5-60000 g - variable adjustable in steps from 0.1 g or 1 g Portioning speed: up to 650 portions per min (depeding on product, casing and portioning size) Speed of rotation: 0-100%, variable adjustable Linking: 0-10, variable adjustable

- Work piece maximum diameter: 8500 mm; - Distance between columns: 8500 mm; - Work piece maximum diameter through gantry travel: 11000 mm; - Work piece maximum height: 6000 mm; - Work piece maximum weight on faceplate: 100 tons; Table-Faceplate - Diameter: 6000 mm; - Speeds range (continuously variable): 0-50 rpm; - 4 x 40 kW main motor FANUC make: 160 kW; Fixed table - Dimensions: 3x2000x6000 mm; Gantry - Horizontal travel Y axis: 11800 mm; - Feeds range (continuously variable): 10000 mm/min; Cross rail - Vertical travel W axis: 5200 mm; - Feed range (continuously variable): 0 ÷ 250 mm/min; - Feed motor power: 50 kW; Vertical Rail Head (turning and milling operations) - Vertical ram travel (Z axis): 2700 mm; - Rapid feed speed for Z axis: 10000 mm/min; - Ram cross section: 450x450 mm; - Milling motor power: 40 kW; - Millin ...

Labeling machine for containers adaptable to industrial lines or manual loading. Variable data printing Ideal for automatic or manual loading. Machine produced by SCM Costruzioni Macchine Italia - Line Lat model, year 1999, Voltage 380-50 Hz - 3 phases TECHNICAL FEATURES: - WEIGHT 600 Kg mm. - ABSORBED POWER 1,5 Kw. - POWER SUPPLY 380 + N Volt 50Hz - AIR CONSUMPTION 15 l./min - AIR PRESSURE 4.5 bar - OVERALL surface 2500x870 mm - HEIGHT max 1800 mm - VARIABLE DATA MARKER Thermal transfer Ribbon - Ribbon foil transfer system Operation description: The linear labeling machine with self-adhesive group LINE LAT LAP-LAT can be inserted in automatic packaging systems for containers of any type and shape. The containers are spaced before entering the machine by centering rollers placed on the sides of the conveyor belt. They are then guided by a counter belt which has the task o ...

Used Filling Machine Cobert Olimpia 1993 The Cobert Olimpia 16 is a used filling machine manufactured by Cobert in 1993 This versatile machine is designed to efficiently fill containers particularly glass bottles with various products such as alcohol sparkling wine and still wine With its reliable performance and adaptable features it has gained popularity in the industry Key Features and Specifications The Olimpia 16 model features 16 filling nozzles allowing for simultaneous filling of multiple bottles It operates using a slight vacuum in the bell ensuring precise and controlled filling The machine incorporates a variable height bell accommodating different bottle sizes One of the notable features of the Olimpia 16 is the rack and pinion mechanism for adjusting the filling levels on the nozzles This feature enables fine tuning and consistency in the filling process The bottle lifting p ...

Used Decrater APE INCA 2000 UP TO 8000 Bph Efficiency and Precision in Bottling of the Decrater Ape inca 2000 Firstly in the bottling sector efficiency and precision are paramount The Used Decrater APE INCA 2000 up to 8000 Bph stands out as technologically advanced It specifically meets the industrial decrating needs Handling and Mechanical Movement Moreover the APE model 2000 decrater excels in its operation It adeptly handles two crates of 12 bottles each Furthermore the mechanical head movement ensures precise handling This is crucial for preventing bottle damage Flexibility and Adaptability of the Decrater Ape inca 2000 Additionally flexibility is a significant strength of the Used Decrater APE INCA 2000 It features a variable bottle grip head which easily adapts to different bottle diameters Therefore the machine proves to be versatile and efficient Variable Production Speed Importa ...

General SKU292M351 LocationBarneveld MakeWysstec AG TypePharma-Extruder PHARMEX 35 T & Noduliser SPHAEROMAT 250 T No.11480 Main Features Motor0.55 KW L/D6 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter35 mm L/D6 D AC-motorcheck (1,5 kW Ex) With variable speed drivecheck Screw speed25-150 rpm Feeding with hoppercheck Capacity2-20 kg/h Single screw extruders With variable speed drivecheck (noduliser) MaterialStainless steel 1.4305 (303) Information Mounted on framecheck With switchgearcheck Floorspace1,1x0,8 m Total height1,7 m Weight340 kg Extra SpecificationsNoduliser PHAEROMAT 250: - disc diameter: 250 mm - with outlet - with cover - motor: 0,55 kW (Ex) - with variable speed drive - disc speed: 0-1440 rpm Other feedAnimal feedSingle screw extrudersPowdered foodsFeed additivesWysstecIndustries > Food & Feed > Other feedInd ...

The machine will be shipped with 3 tools: Tool 1: 2:1 packagingsize 225×170mm (variable forming depth max. product height 80mm); Tool 2: 3:1 packagingsize 225×110mm (variable forming depth max. product height 80mm); Tool 3: 3:1 packagingsize 195×110mm (variable forming depth max. product height 80mm);

Usefull width: 1300 mm Panel thickness: 3 - 80 mm Panel feed by carpet, variable feedspeed 6-30 m/min Coating roller 55? Shore with variable speed and scraper Chrome doctor roller with variable speed and scraper Machine length in the line: 1000 mm

Usefull width: 1300 mm Panel thickness: 3 - 80 mm Panel feed by carpet, variable feedspeed 6-30 m/min Coating roller 55? Shore with variable speed and scraper Chrome doctor roller with variable speed and scraper Machine length in the line: 1000 mm

Description: Year of construction: probably 1986 Adjustment range: In the X-axis (table slide): 900 mm In the Y-axis (sanding head): 600 mm In the W-axis (moving crossbeam): 635 mm Feed speed: In the X- and Y-axis, direct current drive, infinitely variable: 5 - 2500 mm/min In the W-axis, three-phase drive: approx. 800 mm/min Measured value display: Smallest display unit: 0.001 mm Zero point can be selected as required Positioning accuracy (basic deviation X, Y): 0.004 mm Table: Usable table surface: 1020 x 860 mm Permissible table load: max. 800 kg Width of the T-slots: 14 mm Number of T-slots: 7 Distance between the T-slots: 100 mm Working range of the sanding head: Grinding spindle speeds, infinitely variable with electric motors: 4500 - 80000 rpm With air turbines up to 100000 and 160000 rpm Planetary speed, infinitely variable: 5 - 250 rpm Stroke of the grinding spindle sleeve: max.  ...

Description: Serial number: 20625 Travels: X-travel: 1000 mm Y-travel: 500 mm Z-path: 450 mm Control: HEIDENHAIN TNC320 Table clamping surface: 1300 x 500 mm Workpiece weight: 2000 kg Milling spindle (vertical): SK 50 Spindle speeds - infinitely variable: 60 - 3600 rpm Milling spindles (horizontal): Spindle speeds - infinitely variable: 30 - 1800 rpm Drive power of the spindles: 20/25 kW Vertical head manually tiltable: +/-90° Feed rates X/Y/Z - infinitely variable: 10 - 4000 mm/min Rapid traverse: Longitudinal (X-axis): 15000 mm/min Transverse (Y-axis): 15000 mm/min Vertical (Z-axis): 10000 mm/min Projections: Lower edge of vertical spindle to table: 100 - 550 mm Center of vertical spindle to vertical guide: 150 - 600 mm Center of horizontal spindle to table: 0 - 450 mm Center of horizontal spindle to lower edge of headstock housing: 175 mm With various accessories including counter ho ...

Key data: 1000 mm, 370 mm, 430 mm

Article number: 07-07-116 Manufacturer: Reckermann Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: approx. 3300x2200x2200mm Weight: approx. 3100kg Controls: Heidenhain Travel: X-axis: approx. 1000mm Y-axis: approx. 370mm Z-axis: approx. 430mm Spindle: Speed range: approx. 48-2100 rpm Tool holder: ISO 40 Feeds & rapid traverses: in all 3 axes Feed range (infinitely variable) Longitudinal: approx. 10-1000 mm/min Feed range (infinitely variable) Transverse: approx. 10-1000 mm/min Feed range (infinitely variable) vertical: approx. 4-400 mm/min Longitudinal rapid traverse: approx. 5000 mm/min Rapid traverse transverse: approx. 5000 mm/min Vertical rapid traverse: approx. 2000 mm/min Accessories  Various tool holders  Complete documentation  Various tension wrenches  Machine feet  ...

: neu : 2024 : 5551 : Mai 2024, Zwischenverkauf : Italien : 57800 € : 1161.78 € : 1 : 650 mm : 0,5 - 170 mm : 670 x 2200 mm : 4000 m³/h : 120 mm : 6 bar : 78 (+/-2) dB : 1045 mm : 1735 mm : 2090 mm : 930 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on req ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 € : 1487.4 € : 1350 mm : 0,5 - 170 mm : 1370 x 2200 mm : 4000 m³/h : 200 mm : 6 bar : 78 (+/-2) dB : 1750 mm : 2100 mm : 2180 mm : 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable  ...

Description: sanding machine with brushes Technical specifications: the machine was used for structuring veneered panels. sanding width approx. 1100 mm workpiece thickness from 3 mm up to 160 mm belt conveyor with variable feed speed aggregate 1: steel brush diameter 310mm, motor power 5,5 KW. rotation speed fixed. aggregate 2: tynex brush diameter 310mm, motor power 5,5 KW. rotation speed variable by inverter. aggregate 3: steel brush diameter 310mm, motor power 5,5 KW. rotation speed fixed. aggregate 4: tynex brush diameter 310mm, motor power 5,5 KW. rotation speed variable by inverter. CE norms serial number: 30, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 2,100 mm, weight approx.: 2,000 kg

Description: 4-spindle copying lathe with aluminium template STANDARD EQUIPMENT 4 spindles for simultaneous copying of 4 workpieces Variable rotation with inverter Spindle drive with bronze gears and worm gear Centring devices for automatic workpiece positioning Pneumatic clamps Approach and moving away of cutter unit with pneumatic system Cutter carriage feed on rectified guides and recirculating ball pads Independent adjustment of cutter carriage feed and wood rotation Machine and electrical system complying with EC regulations TECHNICAL DATA Max. turning length mm 1100 Max. turning diameter mm 150 Cutter motor power V 380 / 50 - Kw 4 Spindle rotation motor power V 380 / 50 - Kw 0,75 Cutter carriage feed motor power V 380 / 50 - Kw 0,55 Tool holder diameter mm 145 Tool diameter mm 35 Variable carriage feed speed mm/min 0 ÷ 600 Variable spindle rotation speed r ...

Roller die line consisting of:- 1 x Troester 200mm pin barrel extruder Type QSM200K-16D power roller feed, 10 rows of 8 pins, L/D ratio 16:1 Serial no. 1816/88, year 1988, With temperature regulation unit, 282kW ASEA DC variable speed motor mounted on rails (moves away from calender to clean out etc) Hydraulic sheeting head linked directly to:- 1 x Adamson 24in dia x 68in wide two roll calender, peripherally drilled rolls cross axis, bush type bearings, motorised nip adjustment with unidrive gearbox 277kW ASEA DC variable speed motor Hydraulic clamping device for extruder Set of 4 x cooling drums Dual wind up and liner applicator Chalking Unit Siemens PLC control. Complete line in excellent condition. PRICE: On request.

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).

1 x Smit 660mm dia x 2100mm wide two roll mill, Rebuilt 2005, manual nip adjustment, Lunn type safety bars, Back roll surface fluted, Front roll smooth finish. Bush type bearings with flood lubrication, compact \Jahnel\ right angle drive gearbox. with 180KW DC variable speed motor and controls. Strip knives to front roll. Heavy duty 2 part bedplate. Extra Information: Front roll 29 teeth Back (fluted roll) 32 teeth Friction ratio 1:1.1 Motor 180kW DC variable speed, 1300rpm, Gear box ratio 1:9.8 Bullgear 122 teeth, Pinion gear 18 teeth (Ratio 1:6.777) Therefore approx roll speeds as follows: Input motor speed 1300rpm: Front roll 21.53 rpm Back (fluted) roll 19.6 rpm

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Year: Mar 1972, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

Important and outstanding design features of the RaptorX-SL with steel substructure /RaptorX-SL3200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the high-adjustable working area (read-through he under bridge variable : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special coarseness up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm hei ...

Seydelmann K 90 DC-8, 90 liters bowl cutter, all stainless steel, variable knife speed, 2 bowl speeds, variable mixing speeds forwards and reverse, knife shaft brake electrically operated, noise reduction cover, loading device, unloader, in very good condition. The machine is immediatley available and can be tested in our facility in Koblenz, Germany.

Artec mini table lathe C2x300 tips size 300 mm + 8 PCs chisel set Mini table lathe C 2 and 8 PCs. HSS cutters set now in the Westfalia savings Kit. C-2 the spindle speed variable from 200-2500 RPM via a potentiometer is adjustable at the mini lathe. About a 80 mm three-jaw chucks can be clamped workpieces easily. The workpieces can be supported with a tailstock with MK 2-recording. By a quad-steel holder the cutters can be secured, designed for 8 mm cutters. Also thread can be cut with this mini lathe 1.5 mm pitch. All materials with normal strength can be edited. (Aluminium brass steel). Technical data: centre height 90 mm centre distance 300 mm spindle bore 19 mm tailstock intake MK-2 thread cutting range 0.2 1.5 mm speed range 200-2500 U / min variable power 250 Watt/230 V Plan route 65 mm Oberweg sled 55 mm Quill trail 50 mm Dimensions Lxwxh approx. 700  ...

Producer: Suhner Description: - Capacity- 2000l - Brand new microprocesor Mikster MCM 023 - Variable drum speed - Automatic control - Variable pressure level - Pressure measurement; 0-99 % - Manual work mode - 50 programs easy to change - 6 cycles to one program, max cycle time 100h, two phases on cycle - Total time one phase 99 minutes - Brand new inverter Lenze Section responsible for vacuum; - Vacuum pump Busch 36m3 /h - Vacuum valves Danfoss - Total power 5.5 KW ( main motor 4KW + pump 1,5 KW ) - Total weigth 1500 kg - Fully made of stainless steel

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm ( at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ), wherein this is rather unpromising due to the mostly applied layer structure  ...

K+G Wetter vacuum Cutmix 120 STL, model VCM 120 ,120 liters vacuum cutter, variable knife sdpeed, 2 bowl speeds, mixing speed forward and reverse, variable bowl speed, unloader manually operated, hydrlauic unloading device, knife cover electrically operated, with cooking facility. Further Information on demand. You are very welcome to test the machine in our facility in Koblenz, Germany.

Kilia vacuum bowl cutter, year of manufacture 2010, 200 liters bowl cutter, bowl and bowl-cover stainless steel, hydraulic noise reduction cover, knife shaft brake electrically operated, membrane keyboard, variable knife speed, variable bowl speeds, mixing speed, hydraulic loading device for 200 liter bins, hydraulic unloader, You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Qty 1 x Werner & Pfleiderer tangential (Banbury type) Lab internal mixer, Type: GK-1.5N Year: original 1982 Volume: 1,5 L Friction: fixed Gear-box ratio i:1: 13,51 / 15,00 Rotor Speed: variable Ram: pneumatic Discharging: drop door Drive: 22 kW, 440V DC variable speed. Automatic lubrication. In very good condition. Complete with electrical controls etc. Overall dimensions (approx) 2m x 1m x 1.8m high, weight: 1.8ton

LAMINATING SYSTEM POLYTYPE BB 2200 LAMINATION LINE Coating/- lamination equipment for solvent based resin system. On an existing film or composite material. Year: 2008 Condition: Excellent The different film thicknesses what can be used depending on the materials, see references: Plastic foils 25-250 microns Metal foils (copper, aluminium) 20-150 microns Total composite thickness max. 500 microns Machine data: Production speed 0 - 150m/min Production speed 840 - 2160mm Resin 1 - 40g/m2 Winding units (main winder-/ lamination winder-/tensilized film winder): For unwind of the base film there are two winders (main winder/ lamination winder). Winder performance: - Winding direction clockwise / anticlockwise - Brakes ystem for constant and regulated tension e.g. alu foil with max. 2000 kg roll weight - Roll system centerless for steel,plastic-, carton tubes with optimal  ...

Labelling machine Neri model SL400 VTE Labelling machine for the application of self-adhesive labels on rectangular shaped objects. - construction in stainless steel and anodized aluminium; - transport of objects on a variable speed belt; - spacer unit - label riveting unit - automatic unwinding unit - variable speed label output up to 30 mt. /min; - the machine is equipped with all safety devices; - electrical system according to CEi standards; The basic machine is the SL 400 TE labeller for the application of 2 safety labels (Tamper Evident). An additional head is installed on the machine for the application of a third label on the upper face of the product. TECHNICAL DATA Supply voltage: 220/380 V. 50 Hz (415 V on request). Installed power: 3. 5 Kw Overall dimensions: mm 1960 x 1350 Height from ground: mm 1900 Net weight: Kg 500 Case size: min. 63 x 20 mm ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Used Loedige laboratory high shear mixer model MGTL 10. Rok budowy 2015. Equipped in interchangeable vessel 10 L volume. Min. batch volume 0,3 L, max. batch volume 0,8 L. Impeller drive 1,1kW (variable speed). Chopper drive 0,4 kW (variable speed. max 6000 rpm). 1 interlocking magnet switch per vessel. Product contact parts: AISI 316 L/ polished Ra < 8?m Outside parts: AISI 304 Seals: silicone, PTFE Filter bag: stainless steel filter cartrige Control cabinet: painted steel housing Dimensions: wxdxh 1000x500x742 mm Weight: approx 150 kg Weight of 10 L vessel: approx. 15kg.

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

QTY 1 x Pomini VIC1.8-PX1.6 Tandem Lab mixer, Machine number 9912, date 1990, Modern frame design with unitized fabricated steel base, Anti friction roller bearings with floor lubrication, 22kW DC variable speed motor. Rotor speeds 0-230rpm Torque montioring sensors. Siemens PLC control system with S7-300 CPU (combined with original S5). Desktop computer interface. Left hand mixer: Pomini PX1.6 tangential rotor type, Volume 1.6Litre, 2 wing rotors, FY type bronze dust seals, Jacketed chamber for heating or cooling, Hard Chrome plated chamber and rotors, Chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side), Pneumatic oil injector, Pneumatically operated discharge drop door with linear actuator, Pneumatically operated hopper load door, Pneumatic ram with transducers fitted to monitor floating weight position. Proporti ...

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.

EDGE SANDING machine for PANEL and PROFILES type FMB 2 I composition : 1° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 2° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 Blowers for belt cleaning Carpet speed variator from 5 to 25 mt / min Upper adjustable presser with rubber wheels Lateral support for wide panels volt. 380/50

PLONEGE PORTALGRADES, HANDLE CYLINDERS, OPTIONAL: Lead-in slide, CNC, Fairing, Removal of gearbox and Speed ​​variator adaptation for drag wheel, Automatic centralized lubrication, 1 Year Warranty / Porta plongee rules, Saucers wheel holder, OPTION: Porta rules enfilade, cnc, protection, eliminating gearbox and variable speed adjustment for wheel drive, automatic lubrication system, 1 year warranty, Ø grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min / max to grinding: 1.5 / 50 mm, Regulating wheel width: 125 mm, Lubrication (auto / manual): Manual, Control type ((cnc / manual): Manual, Infeed (auto / manual): Auto 125 mm max., Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Maximum infeed grinding length: 125 mm, Motor power grinding wheelhead: 7,5 Kw, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1600 K ...

Four head paperdriller Lawson-Dexter Model B3 Heavy Duty Drill Year 1985-1990´s Details 4 head paper driller Variable drilling speed Variable drilling spinning speed Operation Electric footswitch Available Direct