variable frequency used for sale

really well maintained, equipped with simple CNC control. Saw blade diameter 400 mm This section at 90 ° round 130 mm rectangle 240 x 85 mm flat 180 x 70 mm in MITRE at 45 ° profiles Portrait 120 x 55 mm Feed length with double lifting device to 2 cutting speeds 10/20 m / min. Speed infinitely variable 0-1000 mm / min. Drive motor 400 V, 1.7/2,6 kW Weight 1350 kg Dimensions W x D x H 2750 x 1500 x 1900 mm Accessories: Spray cooling device "Mini pos 807", Blade, roller conveyor, manual.

Wood Turning Lathe big turning diameter over bed allows the turning of workpieces with large diameter - ideal for turning E.g. plate user friendly adjustable speed Digital speed display comfortable working with hand pad and quick adjustment Spindle/tailstock bore 10 mm Top width: 457 mm Tip height over machine bed: 153 mm 3-stage variable spindle speed: 650-1450 min-1, 1250-2800 min-1, 1600-3800 min-1 Headstock, thread: M33 DIN800 Motor power S1 (100%) / S6: 550W / 770W Mains voltage: 230V Net weight: 33kg G & HM-D460FXL

1 plant be certified, very well received. Single girder overhead travelling crane with angle trolley Load approx. 5,000 kg Wingspan approx. 16.750 mm hook path maximum approx. 8,000 mm Make VOITH Year of production/workshop test 1993/2016 equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation including load beam, with frequency control, maintenance Jetty, radio control Working speeds: Hoist up to 20.0 m / min Trolley gear up to approx. 26.0 m / min Crane chassis up to approx. 90.0 m / min

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

1 factory-tested, very well-preserved single-girder crane Load trolley CA 10,000 kg Lifting capacity crane approx. 20,000 kg Wingspan approx. 39,500 mm hook path approximately 15,000 m Make helper / ABUS Year of production / workshop testing 2012/2016 Crane equipped with floor control as emergency steering, ABUS monorail trolley, radio control Working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear infinitely variable approx. 1.0 20.0 m / min Crane chassis approx. 10.0/40.0 m / min

K+G Wetter Cutmix 70 STL bowl cutter, 70 liters bowl chopper, all stainless steel, membrane keyboard, variable knife speed up to 5.000 rounds per minute, mixing speeds forwards and reverse, knife shaft brake electrically operated ,knife head with 6 knives, bowl with highest filling level, noise reduction cover. You are very welcome to test the machine in Koblenz, Germany.

PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

Saw blades: Carbide / HSS, 450 mm Power: saw motor, 4,0 / 5,5 KW Speed: stepless, 10 - 60 min-1 Cutting speed: Blade (450 mm), 7-43, or 15-75 m / min Saw height control: continuously variable, electronically Square 90° maximum working range: 140 x 140 mm 45° max: workspace flat 90° Max: 240 x 80 mm 45° max: work area round 90° Max: 150 mm 45° max: supplies length easy stroke: 5-1000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Gewicht(Säge)CA.:3100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm footprint Lxw: 2500 mm x 1300 mm, the machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very a ...

Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...

Handtmann hanging line consits of Handtmann VF 100 and PLH 216, vacuum filling machine Handtmann VF 100, vacuum stuffer for filling, portioning, linking, case holding device, PCK control, with loading device, filling performance (variable adjustable) max. 3000 kg/h, filling pressure max. 55 bar, with Handtmann PLH 216 hanging machin.

Cold stamping press Stanko P 0443 Capacity, tons: 2000 Nominal liquid pressure, kg/cm²: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000 Price 21500 EUR

AUTOMATIC DOUBLE END TENONER Type GABBIANI TMN 56 . second hand max.opening mm. 3100 min. opening mm.160 max. useful height mm.120 variable feed rate from 4 to 18,5 mt/min Equipped with 3+3 working units - 1+1 scoring unit . motor power HP 1.3 - 1+1 hogging / milling unit . motor power HP 5,5 - 1+1 milling unit . motors power HP 5,5 volt. 380/50

Overhaul year 2018 Year of construction 1995-2005 Saw blades Carbide / HSS 450 mm Power saw motor 5.5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed Blade (450 mm) 15-75 m / min Saw height control infinitely adjustable electronic 5 Workspace square 90° Max: 140 x 140 mm Workspace flat 90° Max: 240 x 80 mm Work area around 90° Max: 150 mm Supply length 5-9999 mm Supply AC servo max speed: 500 mm / s (Saw) approximate weight: 2100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm Footprint Lxw 2500 mm x 1300 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very accurate length tolerances. The machine will be over ...

Demonstration device. The system is designed to work in a closed circuit. It has two separate chambers / phases, the first chemical solution and the second with soapy water. The device is designed to minimize the effort of mixing of substances. A micro-processor controlled system allows easy operation of the unit with a user interface. Inside / work Maß 2000 B x 1500 T x 1500 H Outer dimensions 2800 B x 1600 T x 1800 H Operated electrically Voltage 380 V Power 9 kW Frequency 50-60 Hz Water pressure 60 / 160-200 bar Chemical pressure up to 15 bar Phase I chemistry circuit closed heated chemical tank Phase II water / tap water Capacity 7-10L/min Heating capacity 30 80 ° C Tank capacity 200 L Control manual / automatic Remaining warranty up to 12 months Continuously exhibition equipment on sale

Demonstration device Working mass: 800 B x 500 H x 600 D External dimension: 1100 B x 1300 H x 900 T Operation: electric Heating power: 6 kW Voltage: 380V Frequency 50-60 Hz Frequency Ultrasound: 20, 5 kHz Ultrasonic power: 2.4 kW Warranty 12 months

Showroom machine Firing furnace powder furnace divisible Romer SLP-90 O D + t convection baking oven Powder furnace new SLS - 90 / O D + t Transit oven divisible Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Rated power 90 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on either side - passage oven Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Motor 1,1 kW 6480 L capacity Warranty 12 months

Showroom machine Powder spray booth powder booth powder plant of Romer KPO-3 1 internal dimensions (mm) width x height x depth 2800 x 2100 x 1000 2 external dimensions of mm width x height x depth 2800 x 2300 x 1600 3 frequency 50 Hz 60 Hz 4 drive electric 5 mains voltage V 400 V + N + E 6 nominal output KW 2.2 7 filter polyester 8 Panel v/h/r/l right 9 filter surface M ² 22.5 10 filter holder quickly 11 filter cleaning pneumatic 12 filter cleaning type-automatic, time interval can be set. -Manually 13 fans type aluminum 14 fans number St. 1 15 doors St. / type no 16 air consumption m 3 /h 10.200 17 outdoor paint RAL 1013 18 warranty 12 months

Leading Jet mixer Manufacturer: Ystral Type: Y 11,000 L / TFW - 4 D Year of construction: 2003 Technical data: Power: 11 kW / 15 HP Revolutions: 1,465 U/min Voltage: 230 / 400 V Frequency: 50 Hz Weight: 150 kg In very good condition!

Rühle SR 1 dicer, performance 0,8t/h, grid set variable adjustable, 1 cutting knife. The machine is immediately available and can be tested in Koblenz, Germany.

Saw blades Carbide / HSS: 450 mm Power: 4,0 / 5,5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed (450 mm) blade: 7-43, or 15-75/min Saw height control adjustable full electronic Square 90° maximum working range: 140 x 140 mm 45° max.: Flat workspace: 90° Max: 240 x 80 mm 45° max: work area round: 90° Max: 150 mm 45° max: supplies length easy stroke: 5-2000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Approximate weight: 3600 kg Dimensions Lxwxh: 3500 mm x 1300 mm x 2100 mm Lxw surface: 3500 x 1300 mm? Technical description of 401 k PPS / PPS 451 NA 2000 retrofit 401 k PPS / PPS 451 retrofit high-speed sawing machine for steel. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free o ...

Overhaul year: 2018 Year of construction: 2000-2008 Saw blades Carbide / HSS: 315-360 mm Power saw motor: 15 KW Infinitely variable speed: 15 - 130 min-1 Cutting speed Blade (350 mm): 16.4-142.8 m / min Saw height control adjustable: electronic Bdgmy08nkg Square 90° maximum working range: 100 x 100 mm Work area round 90° max.: 110 mm Supply length 5-970 mm (~ 9999 mm multiple hub) Supply AC servo max speed: 300 mm / s Compressed air connection provided on site: 6 bar Approximate weight saw: 1800 kg Dimensions Lxwxh: 1900mm x 1250mm x 2100mm LxB floor space: 1900 mm x 1250 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. The machine is completed retrofit, both technically and visually in mint condition. A  ...

Kilia Meister Plus 50 bowl cutter, 50 liters bowl of stainless steel, almost completely made of solid stainless steel, Siemens control, noise absorbing cover of transparent special plastic, central point of lubrication for knife shaft, balanceable and exchangeable knife head, variable knife speed, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Newman Model S-282-18" Double-Sided Helical Head Planer Listing Type: Machine for Sale Category: Planers-Double Manufacturer: Newman Model: S-282-18" Double-Sided Planer Year: 1994 Electrical Specs: 3PH Price: $25,500.00 negotiable Type: Used Condition:Very Good Location: Lockport, New York 14094 USA Phone: 716 433 4224 Description: - Material Capacity: 18" Wide x 6" Thick - Shortest Stock (not butted) 48" - Top Head: 40 HP 3,600 RPM Direct Drive - Bottom Head: 25 HP 3,600 RPM Direct Drive - 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls - Infinitely Variable Speed Feed Control from 40 - 150 FPM - Newman Six-Row "Quiet Cut" Helical Carbide Cutter heads - Feed Works Consist of Two Pivot Mounted Top Feed Rolls - Top head Chip breaker with 3" - Sections and Independent Yield of 1-1/2" - Air Operated Pressure Bar - Top Head Power Hoist - Automatic C ...

Manufacturer Elumatec type MGS 142 Overhaul year: 2019 Year of construction: 1995-2018 Blade Max carbide: 500 mm Power saw motor: 4 KW Speed saw motor: 2800 min-1 Cutting speed blade 500 mm: 4400 m / min Saw height control: continuously variable, electronically Workspace Vierkant90 ° Max: 130 x 130 mm flat workspace: 90° Max: 190 x 130 mm work area round: 90 ° Max: 150 mm pneumatic supply length: 5-560, 10-1120 mm Compressed air connection, by the customer 6 bar Gewicht(Säge)CA.: 800 kg Dimensions Lxwxh (saw) about: 2900mm x 1400mm x 1500mm footprint Lxw: 2900 mm x 1400 mm additional description Elumatec SA 142 4KW straight cutting retrofit Elumatec SA 142 4KW straight cutting retrofit Fully automatic saw machines for non-ferrous metal and plastic The machine is both technically and optically after completed retrofit in mint condition. The machine will be  ...

Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.

FRIGOSCANDIA GYROCOMPACT GC42-08-30-06-NS-CCR Product number:M19-5013 Cooling capacity:100 kW Number of fans:1 Fin spacing:25mm - 6mm mm Defrost:Hot gas Refrigerant:NH3 Refrigerant Content:390 kg Voltage:400 Volt Power consumption:25 kW Motor power:30 kW Dimensions:7050 x 2620 x 3900 mm Weight:6500 kg Year:1996 Number in stock:1 piece(s) Price:Quotation request A nice compact Frigoscandia spiral freezer. Model GC 42-08-30-06-NS-NHT-CCR with a product capacity of maximum 1.000 kg/h (based on green peas). In/outfeed configuration is North/South. Infeed height = 560mm, outfeed height = 2540mm. Belt rotation is Counter Clock Wise, belt width gross = 420mm, belt width net = 375mm, max product height = 65mm, numbers of tiers = 30 tiers. Belt mesh width = 6mm. This Frigoscandia spiral freezer has been well maintained and is in top condition. The freezer is executed with a S. ...

The engine was mounted in a lathe. With motor base to align and fasten. Cabinet size T x B x H: 470 x 1200 x 1000 mm Engine size T x B x H: 1000 x 1100 x 1000 mm plus control with potentiometer for variable speed Pully-size: 180 mm Diameter of shaft: 50 mm v-belt pulleys Total weight: approx. 500 kg A total of 2 PCs. EURO-pallets With manual and electronic schema

Air screw compressor Atlas Copco ZR 500 VSD 500 kW, 8.6 bar, 79 m3/min Oil-free. Water cooled. Variable speed drive. Volume flow 22.0 79.0 m3/min.

Meat processing equipment from a modern German butcher's shop for sale. The equipment consists of: • Seydelmann AD 114 automatic grinder • Kilia Meister Plus 50, 50 liters bowl cutter with variable knife speed • Vemag Robby Typ 136 vacuum filling machine with casing holding device • Poly Clip SCD 7095 clipping machine • Stiller can seaming machine DV 10 PS • Maja SA 85 S ice generator • Vakona ESK 125 Tumbler • Stein smoke house • scales, slicers, moulds, stainless steel tables If desired we can arrange worldwide delivery and send our German master butcher to instruct your staff on-site.

BITZER / ALFA LAVAL L7SW1S12PP Product number:M19-4335 Cooling capacity:930 kW Refrigerant:NH3/R717 Refrigerant Content:80 kg Voltage:400 Volt Motor power:250 kW Dimensions:9.000x3.000x2.600 mm Weight:13.500 kg Year:2014 Number in stock:2 piece(s) Price:Quotation request Very nice and young Bitzer water-cooled ammonia water chiller(s) built in a machine-room container with mechanical cooling. This Bitzer chiller consists of a frequency controlled Bitzer screw compressor (brand Danfoss), WEG electric motor 250 kW, horizontal oil separator, oil cooler, combined economiser/liquid separator, Alfa Laval plate heat exchanger evaporator, Alfa Laval plate heat exchanger condenser, Grundfos speed controlled pumps and a control cabinet with Siemens PLC and touch screen. The above mentioned capacity is at +18/12°C in/out and a flow rate of 143,7 m3/h. and a cooling water supply +4 ...

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm

3 liter laboratory mixer -Container V2A -Container to remove -Drive 1 motor frequency controlled

Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...

CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contact contact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for cle ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps 1.000 liters NEW! Measurement und weight: Diameter: 920 mm Total height: 2150 mm Cylinder height: 1500 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x  ...

Model SLP-15/O - available immediately! Memorized width 1200 x 1600 height x 1800 deep Dimensions 1720 width x 2410 height x 2100 deep Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta,  ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps 3.000 liters NEW! Measurement und weight: Diameter: 1110 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

Round timber Sorting conveyors make JUMPER. 43 sort fields right and left 3-5 m length of wood. Drive unit with 2 x 75 kW. From Boxer electrically with each 3.0 kW. 2 x kW frequency converter FIG. 90 each. Steel base with 2,600 mm. sorting chain conveyor height 1 year old! Plant until April 2017 in use to visit! Built in 1997.

Model SLP-15/O - available immediately! Memorized width 1200 x 1800 height x 1600 deep Dimensions 1720 width x 2610 height x 1900 depth Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Control: 7 "touch screen Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps 5.100 liters NEW! Measurement und weight: Diameter: 1600 mm Total height: 3357 mm Cylinder height: 2500 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

FARREL BRIDGE 4-ROLL, INCLINED 'Z' CALENDER. 66 inch roll face width, 28 inch diameter. Rolls are current polished to produce matt PVC finish. Independent variable speed DC drive to each roll via solid state, AC to DC converter. Cross axis control on roll 4 (roll 3 fixed). Extensively modified and up-graded controls and drives.

Storage tanks outside marbled for wine, water, fruit juice, schnapps 6.150 liters NEW! Measurement und weight: Diameter: 1600 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

1 x large KSB pump + frequency inverters 45 kW Engine: KSB 45 kW 2965 U/min Circulation pump: Type ETANORM G 065-250 G0 138 sqm / h Year of construction 2009 Frequency inverter: Siemens 6SE6436-5BD31-8DA0 The pump was only 1 week in use, the flow rate was not sufficient for this project was replaced with larger pumps, the inverter was purchased to fit and has been Orginalbestandteil

Storage tanks outside marbled for wine, water, fruit juice, schnapps 7.800 liters NEW! Measurement und weight: Diameter: 1800 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps 10.250 liters NEW! Measurement und weight: Diameter: 2060 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...