136,892 used machines on RESALE, but how to find them? Machine Search
Lifting device for 200-litre containers Manufacturer: Carnitech Type L 125 Dimensions 1300 x 1500 x 4050 mm Power 3 x 400 V, 50 Hz, 0.75 kW With slide for liquid products
Technical data Type: SESOTEC Genius+ GO Search coil dimension: 700x300mm Product dimensions: 600x265 (wxh in mm) Conveyor belt length: 2,000mm Conveyor belt width: 600mm Conveyor belt height: 900+/-50mm Basic search sensitivity: FE: 1.2mm; NFE: 1.5mm; SUS: 2.0mm Search frequency: Multi-frequency Year of construction: 2026 Special features: New device Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V / 50Hz Excretion: Alarm and Stop Operating side: left in the direction of conveying Accessories: Paper documents
Technical data Type: SESOTEC Genius+ GO Search coil dimension: 700x400mm Product dimensions: 600x365 (wxh in mm) Conveyor belt length: 2,000mm Conveyor belt width: 600mm Conveyor belt height: 900+/-50mm Basic search sensitivity: FE: 1.5mm; NFE: 2.0mm; SUS: 2.5mm Search frequency: Multi-frequency Year of construction: 2026 Special features: New device Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V/50HZ Excretion: Alarm and Stop Operating side: left in the direction of conveying Accessories: Paper documents
Technical data Type: Loma IQ3+E Search coil dimension: 650x150mm Product Dimensions: 300x600x115mm (LxWxH) Conveyor belt length: 1,800mm Conveyor belt width: 600mm Conveyor belt height: 850+/-75mm Basic search sensitivity: FE: 1.2mm / NFE: 1.5mm / SUS: 1.8mm Search frequency: Multi-frequency Year of Make: 2017 Special features: on castors Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V/50Hz Rejection: Retraction Carriage 250mm Operating side: in the conveying direction right Accessories: 1 set of test rods
Technical data Type: Ceia THS/21E Search coil dimension: 400x225mm Product Dimensions: 350x185 (wxh in mm) Conveyor belt length: 1,500mm Conveyor belt width: 350mm Conveyor belt height: 800+/-100mm Basic search sensitivity: FE: 1.0mm; NFE: 1.2mm; SUS: 1.5mm Search frequency: Multi-frequency Year of manufacture: 2018/2025 Special features: 2 identical devices available Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V/50Hz Excretion: Alarm and Staop Operating side: in the conveying direction Left Accessories: 1 set of test rods
Technical data Type: Pulsotronic M-Pulse2 Search coil dimension: 600x100mm Product dimensions: 560x70 (wxh in mm) Conveyor belt length: 1,600mm Conveyor belt width: 560mm Conveyor belt height: 850+/-50mm Basic search sensitivity: FE: 0.8mm; NFE: 1.0mm; SUS: 1.2mm Search frequency: Medium Year of Make: 2013 Special features: very good condition Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V/50Hz Excretion: Roller conveyor folding upwards Operating side: in the conveying direction Left Accessories: 1 set of test rods
Technical data Type: Loma IQ2 Search coil dimension: 550x200mm Product dimensions: 500x165 (wxh in mm) Conveyor belt length: 1,500mm Conveyor belt width: 500mm Conveyor belt height: 900+/-50mm Basic search sensitivity: FE: 1.2mm; NFE: 1.5mm; SUS; 2.0mm Search frequency: 156.8 kHz Year of Make: 2005 Special features: on castors Conveyor belt: link chain Conveying speed: approx. 25m/min Motor: Gear Motor Connection: 400V/50Hz Excretion: Alarm and Stop Operating side: in the conveying direction Left
x-travel: 350 mm y-travel: 250 mm z-travel: 300 mm Control: SINUMERIK 828 D distance spindle nose and table: 120 -420 mm surface area: 520 X 300 mm table weight: 100 Kg T-slots: 5 T - slots distance: 45 mm T - slots - width: 12 mm turning speed range - milling: 0 - 10.000 U/min Torque: 33/41 0 spindle drive: 7/8,5 kW Tool taper: SK - 30 : 20 fach total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data Type: SESOTEC GLS Genius+ Search coil dimension: 500x150mm Product Dimensions: 440x115mm (LxH) Conveyor belt length: 1,500mm Conveyor belt width: 440mm Conveyor belt height: 800+/-100mm Basic search sensitivity: FE: 0.8mm / NFE: 1.0mm / SUS: 1.2mm Year of construction: 2024 Special features: new conveyor belt Conveyor belt: Gleiderkette Conveying speed: variable Motor: Gear Motor Connection: 230V / 50 Hz Excretion: Alarm and Stop Operating side: left in the direction of conveying Accessories: 1 set of test rods
Vacuum water degassing system Manufacturer: GEA/Filler Pack Type ONEX Capacity: 30,000 L/hour, 300 HL/hour Technical specifications : The facility is 2-stage Residual oxygen content
Scheffer Indoor Crane System 500 kg For sale is a high-quality, fully functional indoor crane system (single-girder overhead crane) from the premium manufacturer Scheffer Krantechnik, equipped with first-class quality components from Demag. The system has a synchronous double hoist (tandem operation) with two independently movable Demag electric trolleys. This design is ideal for lifting long, bulky or heavy goods (such as profiles, pipes or plates) absolutely horizontally and safely at two points at the same time. Technical data for the load capacity & performance: Total lifting capacity of the system: 500 kg (0.5 tons) with simultaneous use of both hoists Load capacity per hoist: 250 kg individually Manufacturer's plate specification: 2 x 2 x 0.125 t (2 hoists in 2-strand operation with a base load of 125 kg each) Crane manufacturer: Scheffer Krantechnik (Leading ...
: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 € : 284.16 € : 1 : 2500 kg : 1300 mm : 450 mm : 550 mm : 600 mm : 80 mm : 1600 mm : 1550 mm : 2000 mm : 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suitable for John Deere 4400 and 4500 telehandlers, 13 teeth with 20.5 mm shaft diameter
: neu : 2026 : 070236 : September 2026, Zwischenv : Türkei : 6900 € : 133.17 € : 500 kg : 1200 mm : 400 mm : 550 mm : 300 mm : 80 mm : 1450 mm : 1200 mm : 1640 mm : 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The scope of delivery includes: 01x Depth web frame, new with push-through protection Material colour: sendzimir galvanised for column depth: 1,100 mm Total depth: 1,200 mm Total width: 850 mm Support angle: 1,200 x 100 x 50 mm Cross connector: 850 x 35 x 35 mm Material thickness: approx. 3 mm Weight/piece: approx. 12.00 kg Note: The depth web frame and the integrated Prevent push-through protection in the case of transverse and Longitudinal storage of containers, lattice boxes and pallets, the storage unit slips off. They also serve to stabilize the Pallet storage on the shelf.
Unpacking machine for removing glass bottles from beverage crates. Five crates are unpacked per cycle., Additional title: Glass bottle unpacker for beverage crates with 5 gripper heads, Operating hours: 9673, Capacity: 35000 bo/h, Power: 24 kW, Current: 40,8 A, Formats: 0.5 L NRW bottles in 9- and 20-bottle crates, Material: housing from stainless steel, Position: in a floor-standing cabinet with feet, Base construction: T-formation, Features: 5 packing heads; bottle table; crate transport; drives; protective housing with doors; control cabinet with control elements
System for depalletizing empty beverage crates and palletizing full beverage crates. The system consists of the following components: - Depalletizer (Matek/Packtech, 2001): robotic arm with clamping grippers for layer-by-layer depalletizing; upgraded in 2017. - Palletizer (Matek/Packtech, 2001): robotic arm with clamping grippers for layer-by-layer palletizing. - Pallet pressure check (Syscona, 2001) - 2 pallet magazines (for good and rejected pallets) - Pallet labeling system (2005) for applying EAN 128 labels - Pallet strapping system (Strapex, 2005) for applying two horizontal straps - Pallet conveyors with turning segments as well as infeed and discharge stations, Additional title: Complete palletising and depalletising system for beverage crates; 2001 - 2017, Capacity: 44000 bo/h, Formats: 0.5 L NRW bottles in 20-bottle and 9-bottle crates, Features: Depalletising robot; Palletising ...
A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperatu ...
weight max.: 5000 kg workpiece diameter: 250 - 2500 mm total power requirement: 0,75 kW table turning speeds: 100 - 1000 mm/min diameter of running wheel: 250 x 140 mm weight of the machine ca.: 800 kg range L-W-H: 2200 x 2500 x 800 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 150 mm workpiece length: 1300 mm work piece width: 800 mm max. dia. of grinding wheel: 150 mm turning speed range: 0 - 2830 U/min work height max.: 945 mm milling-head swivable +/-: 180° engine output: 1.5 kW weight of the machine ca.: 230 kg. dimensions of the machine ca.: 1435 x 1100 x 1510 mm The Easy T is the cost-effective alternative to the conventional ones grinding and deburring machines. His head consisting of a grinding wheel and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components. Furnishing : - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180° ...
pressure: 3 - 6,5 kg / cm² bar rate of flow: 26 l/min diameter of die - min./max.: -- mm Ratio: 73 : 1 rated current: 1,65 KW weight of the machine ca.: 100 kg dimensions of the machine ca.: 730 x 760 x 1200 mm noise level: 78 dB(A) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 180 t dimensions of the machine ca.: 2 x 1,5 x 2 m strokes per minute: 60 total power requirement: 3 kW weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t dimensions of the machine ca.: 2 x 1,5 x 2 m strokes per minute: 80 total power requirement: 3 kW weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece height max.: 100 mm workpiece width - max.: 1300 mm bending speed: 0,4 - 2,6 m/min number of spindles: 6 Stk Spindle length: 6 x 350 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,07 x 2,3 x 2,21 m Includes a recirculating conveyor system for workpiece carriers and an exhaust system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1.000 t nominal power: 10.000 kN stroke length max.: 1.650 mm working feed: 62 mm/sec weight of tools max.: 40.000 kg voltage: 400 V total power requirement: 420 kW weight of the machine ca.: 254 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 300 mm coil internal dia.: 360 -440 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
band width: 200 mm band speed: 20 m/min : 150 kg - Internal clamping range: 200- 550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electric Hoist for Manufacturing Plants -100% Inox, Torros UK Lifts up to 150 kg. Production - 2016 England. It is used for moving and lifting pallets, boxes, cassettes. Electricity supply, battery-based. Factory completely renovated by MM SERVICE
longitudinal travel: 400 mm cross travel: 160 mm table length: - mm table width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
longitudinal travel: 400 mm cross travel: 160 mm table length: - mm table width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
specimen dia.: - mm length of specimen: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m Volumetric samples - cutter / sample punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: - kW tool adaptor: KOMET PKB 200-20-112 total power requirement: - kW weight of the machine ca.: 700 kg dimensions of the machine ca.: 1,6 0,7 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working width: 1000 mm workpiece width - max.: 0,5 - 50 mm sandingbelt width: -- mm weight of the machine ca.: 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces and edit twice. All pairs of aggregates can be switched on/o ...
weight max.: 5,0 t workpiece diameter: 250 - 2500 mm total power requirement: 0,75 kW load capacity drive unit: max. 2500 kg load capacity rotating unit: max. 2500 kg weight of the machine ca.: 0,9 t The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Supply pressure distribution. || Features: | - Electronic components of Top quality | - Infinitely adjustable speed of the drive unit | - Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and includes a ...
weight max.: 1200 kg workpiece diameter: 20 - 800 mm total power requirement: 0,75 kW traversing speed: 80 - 1600 mm/min weight of the machine ca.: 56 kg range L-W-H: 520 x 470 x 390 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: -- mm workpiece length: -- mm work piece width: 18 mm range of angles: 15° - 50° ° weight of the machine ca.: 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can ...
diameter: -- mm workpiece length: -- mm work piece width: 12 mm range of angles: 30/45/22,5/37,5/50 ° weight of the machine ca.: 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of 95 mm Variable setting of the desired bevel using an exchangeable holder kit ...
: gebraucht : 1988 : 070008 : prompt, Zwischenverkauf v : Deutschland : 1200 € : 1 : 400 mm : 700 mm : 1500 mm : 2050 mm : 820 mm : 1000 mm with brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 10900 € : 209.28 € : 1250 kg : 1300 mm : 450 - 550 mm : 400 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control with pneumatic downholer Alternatives (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 070007 : prompt, Zwischenverkauf v : Deutschland : 1200 € : 1 : 400 mm : 700 mm : 1500 mm : 2050 mm : 820 mm : 1000 mm with brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
core boring: 70-560 mm bore depth: 20000 mm drilling diameter: 70-500 mm core boring capacity in St 60 - reboring: special: 560-1000 mm workpiece diameter: 3200 mm workpiece weight: 200 t faceplate diameter: 2900 mm speed of boring spindle:: 100 - 500 U/min feed range: 3 - 2000 mm/min boring spindle drive: 55 kW spindle head drive: 150 kW workpiece turning speeds: 230 U/min control: Fanuc total power requirement: - kW weight of the machine ca.: - t 2010 Retrofitted equipped with: - Fanuc Control - 4-Jaw Chuck - Oil Pressure Head - Boring Head - Drill Head - 2-Point Rollers Steady Rest (4) - 3 Point Steady Rest (2) - Bar Rest (2) - Coolant & Coolant Piping - Chip Conveyor - Honing Oil Tank & Honing Tool Bars The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
core drilling diameter max.: 56 - 650 mm bore depth: 24000 mm swing diameter: 5800 mm max. workpiece diameter: 3400 mm workpiece length - max.: 24000 mm workpiece weight max.: 380 t speeds: 160 U/min faceplate diameter: 2500 mm control: FANUC 31i-B bore head horizontal movement: max. 25870 mm cutting speed: 0,1 - 1000 mm/min rapid feed: 4000 mm/min main drive: 500 kW bed length x bed width: 53850 x 2500 mm total power requirement: 300 kVA weight of the machine ca.: 700 t dimensions of the machine ca.: 95 x 72 m Deep Hole Drill & Honing Machine (installed 2017) - CNC Control Fanuc 31i-B - BTA Boring - Boring Head (A-Axis) - Pressure table (Z-Axis) - Chip Conveyor - 2 steadies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
UTITA AF 15X2 ist eine Tieflochbohrmaschine hoher Präzision, konstruiert für hohe Genauigkeit und Zuverlässigkeit. Arbeitsmöglichkeiten: 2 Bohrspindeln, Bohr-Ø ab 15 mm, Spitzenhöhe 200 mm; Tisch 700×380 mm; Längsweg (X) 400 mm. Technische Hauptdaten: 9 Drehzahlstufen 1.500–12.600 t/min; Anschluss 50 Hz 3×380 V; Leistung 3,2 kW; Abmessungen L3000×B1600×H1800 mm. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Werkzeugbau und Medizintechnik. Technische Daten ohne Gewähr
TBT T 120-3-250 ist eine Tieflochbohrmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Drei Bohrspindeln, Bohrtiefe max. 400 mm; Bohrbereich Stahl Ø 2–10 mm; Aufbohren Stahl bis Ø 18 mm, Guss bis Ø 20 mm; Spitzenhöhe 180 mm; Spindelhub und Einspannlänge 700 mm; Tisch 1280×420 mm. Drehzahlen 3 Stufen 700–6400 min-¹; Vorschübe 15–500 mm/min; Eilgang 3 mm/min; 50 Hz 3×420 V; 4 kW; Gewicht ~2500 kg; Abmessungen 3450×900×1500 mm. Eignet sich für enge Toleranzen; Branchen: Automotive, Luftfahrt, Werkzeugbau, Medizintechnik. Technische Daten ohne Gewähr
HAUSER ist ein Werkzeug-Vorreinstellgerät, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Es liegen keine Angaben zu Arbeitskapazitäten (Durchmesser, Module, Längen, Verfahrwege, Werkstückabmessungen) vor. Es sind keine technischen Daten angegeben (Spindeldrehzahlen, Vorschübe, Stromversorgung, Abmessungen, Gewicht). No specific accessories listed. Ermöglicht das Erreichen enger Toleranzen; typische Einsatzbereiche: Automobil, Uhrenindustrie, Werkzeugmaschinenbau, Luft- und Raumfahrt, Medizintechnik. Technische Daten ohne Gewähr
WEBER TTS-D-300 + ECO2C ist eine Entgratmaschine für Rohre und Profile, für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Breite 300 mm, Höhe 8–100 mm; Band 2400×300 mm, 2–12 m/min. Daten: 50 Hz 3×400 V, 7 kW, Gewicht ~1300 kg, Maße 2300×2200×2250 mm. Zubehör: Staubabsaugung Sideros Eco 2. Erreicht enge Toleranzen; Einsatz in Automotive, Werkzeugbau, Luftfahrt, Medizintechnik und Uhrenindustrie. Technische Daten ohne Gewähr
IXION TL 600 NC 1 ist eine Tieflochbohrmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten: Bohrtiefe max. 600 mm, bis Ø 18 mm, Spindelhub 600 mm, Tisch 1375×700 mm drehbar 360°, Tragfähigkeit 2000 kg, Verfahrwege X 700 mm, Y 500 mm. Technische Daten: Spindeldrehzahl bis 4000 1/min, Werkzeugaufnahme SK40, Spindelmotor 2,3 kW, Anschluss 50 Hz 3x380 V, Gewicht ca. 2800 kg, Maße L4500×B1800×H2700 mm. Zubehör: Bohrfutter, Bohrfutter mit Innenkühlung, Digitalanzeige 2 Achsen, Kühlmitteleinrichtung. Erreicht enge Toleranzen; typische Branchen: Automobil, Luftfahrt, Medizintechnik, Uhrenbau, Werkzeugbau. Technische Daten ohne Gewähr
KELCH Kalimat C34 ist ein Werkzeug-Vorreinstellgerät von KELCH, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit bei der Vor-Einstellung und Vermessung von Werkzeugen. Betriebsfähigkeiten: Einsatz für Werkzeugvorstellung und Messung. Hauptdaten: Maschinengewicht ca. 250 kg; Abmessungen L900 × B600 × H1100 mm. Entwickelt zur Erreichung enger Toleranzen; typische Einsatzbereiche: Automotive, Uhrmacherei, Maschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr
maximum number of results exceeded
please refine your search
