130,194 used machines on RESALE, but how to find them? Machine Search
Used pneumatic hand-edge-contour milling machine with associated pneumatic maintenance unit (filter/regulator combination) on mounting plate. Manufacturer according to documents: MFK / Gerald Klug Industrial representation Type: 310-DHKKF Machine No.: 411 Equipment / Scope of delivery: • Pneumatic hand-edge-contour milling machine • Collet / tool holder mounted • Pneumatic maintenance unit (filter + pressure regulator with pressure gauge) • Compressed air hoses • Hook wrench • Operating instructions (original) • Operating pressure: 6 bar ...
Wabeco screwdriver with industrial screwdriver Fein AS sd 715-1 Industrial screwdriver: Fein AS sd 715-1 1000 rpm 42 V / 40 W / 1A Foot control by Hans Bernstein The hand lever is used to guide the industrial screwdriver upwards against the spring, hold the screw in position, release the lever and start the rotary movement with the foot switch. Due to the spring pressure and the dead weight, the screwdriving process is carried out without manual effort.
Key data: 1000 mm, 1 t
for one-sided loading and unloading, with large stop plate and brake Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Coil weight: 1000 kg Machine Number: 308 Colour: blue/yellow Machine weight approx.: 350 kg Dimensions: 800 x 1800 x 1400 mm Coil width: 1000 mm Clamping range: up to 510 mm Load capacity in kg :1000 kg
We are selling here a metal detector from the manufacturer Mesutronic, type Meatline 07 O in a very good, used and functional condition. The machine runs on 230 volts, built in 2016, completely stainless steel, passage 55 mm, touch control, for connection to filling machine, was only used for test purposes, rollable, workshop tested, immediately ready for use, dimensions W/D/H 40/60/140 cm, others on request.
USM Haller Desk 175x100cm, Pearl Grey Auction-ID: A7-46320-83
AS/RS, Dematic / Siemens, approx. 19,450 crate spaces, crates approx. 600x 400m x 320mm – : Price ex site: 109.000.-€ (net), plus dismantling etc.! Manufacturer: Siemens AG, Logistics and Assembly Systems, Distribution and Industry, 58300 Wetter/Ruhr Type: AS/RS Year of Make: 2006 Device type: Dematic SR-M100/1 Dimensions of the system: length x width x height: 32,282x15,015x7,064 mm Storage locations: 19,450 pieces Number of devices: 3 pieces Payload: 2x50 kg Load units (dimensions max.): 600x400x320 mm Travel speed: 200 m/min Lifting speed: 120 m/min Extension speed: 100 m/min Condition: good Available: Q4 2024 Location: 89584 Ehingen (Donau)
Includes 2 pumps and pressure vessel Auction-ID: A1-41682-58
Sparc Cerberus Combination unit Fortress Metal detector head Usable aperture - 350mm x 120mm Conveyor - 300mm Weigh Table length - 520mm Right to left direction Ply belt 16amp single phase plug machine is fully tested and working with new belts, bins supplied and all fail safes working Lockable bin, bin full etc Supermarket Spec
Equipped with belt pulley; Auction-ID: A1-41682-17
According to photos, weight estimated Auction-ID: A1-45666-12
Inv. Num. : 7717 Type:- Producer: Mettler Toledo Created: 2016 Parameters: The machine is in good condition.
Working condition, 7 bar working pressure Auction-ID: A3-43525-2195
for sale Universal coolant device 230 V incl. containers, switches, plugs and hoses for mounting on lathes, drills, etc. Weight approx. 4 kg
Centrifuge for lateral feeding of an extruder with flakes / scrap the centrifuge is equipped with a loading tank previous use was on a 100 mm extruder with a conveying capacity of approx. 330 kg for PET flakes at call
Description The TOWNSEND 9000 Automatic Skinner is a device that uses technology that allows the user to achieve high efficiency during the skiving process. The 9000A is the ideal solution because it removes the skin without damaging the meat. The skinner offers a wide range of possibilities that can be used for various types of meat, depending on the needs of the producer. The TOWNSEND 900 is a very safe, efficient, precise and reliable device in its class. The machine is an ideal solution for small and large processing plants. The skinner has a capacity of 1300 - 1800 pieces/h. Specification: Brand: TOWNSEND Model: 9000 Type: Skinner Dimensions: 1350 x 950 x 2100 ( mm ) Power supply: 400V 50Hz 3N Power: 1.5kw Belt width: 500 mm Knife width: 510 Capacity: 1300 - 1800 pcs/h
Number of blades: 24 Condition: unused including: PTO shaft Auction-ID: A3-43524-1372
Inv. Num. : 7803 Type: EM 5 N II/L 2F Producer: ERNST Created: 2006 Parameters: Minimum length of the workpiece: 350 mm Maximum workpiece thickness: 70 mm Grinding width: 1380 mm Weight: 5100 kg
Ankom XT10 Fat Extractor + RD Dryer Fat Extractor ANKOM XT10 for Crude Fat Determination The closed system with FilterBag technology shortens extraction times Sample Weighing: 1-2g directly into FilterBags Working range: 0-100% fat, extraction times: 15-60 min, extraction up to 15 samples simultaneously Semi-automatic system, Unattended process flow> 90% solvent recovery, Manual addition of solvent More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
maximum number of results exceeded
please refine your search
50 € 
