van de wiele used for sale

Manufacturer: Alfa Laval Model : DX 4555 Condition: used Year of Manufacture: 1996 Operating hours : 4,400 The machine is equipped with a high-quality screw coating made of tungsten carbide tiles. The on-site control panel and control cabinet belonging to the machine are still available and could be used further. A frequency converter matching the machine is also included. Shortly before it was taken out of service in 2014, the decanter was equipped with new tiles, so the level of wear should be relatively low Find more here - .ucymachines/ Contact us at - sales@ucymachines

Dräger Infinity Delta – Medical Monitor The Dräger Infinity Delta is a medical device used in hospitals for the continuous monitoring of patients' vital signs. The manufacturer of this device is Dräger Medical Systems, Inc., a well-known company that produces medical equipment for hospitals and healthcare facilities. The device is most commonly used in intensive care units, operating rooms, and other hospital departments where continuous monitoring of a patient's health is necessary. This monitor allows healthcare professionals to monitor various vital parameters, such as heart activity through an electrocardiogram (ECG), pulse rate, blood pressure, respiratory rate, and blood oxygen saturation (SpO₂), depending on the installed modules and connected equipment. The measured values are displayed on the screen, allowing medical staff to observe changes in the patient's conditi ...

Tire mounting machine Attachments New Auction-ID: A3-46141-454

Manufacturer: BvL Series : Ocean RW Model: 1250 2T Year of Manufacture: 2019 General Data - Max Length: 1000 mm - Max Width: 750 mm - Max Height: 750 mm - Diagonal: 1250 mm - Max Load Capacity: 500 daN = 500 kg (even load distribution is required to avoid static issues) - Operating Voltage: 3 x 400 V, N+PE, 50 Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

Connection 230V and 400V, Air pressure connection Auction-ID: A3-46142-45

Auction-ID: A1-50529-280

Auction-ID: A1-51213-21

Disassembly at the expense of the buyer Auction-ID: A3-46142-35907

Of various shapes and colors Auction-ID: A7-50486-5

Dräger Infinity Delta – Medical Monitor The Dräger Infinity Delta is a medical device used in hospitals for the continuous monitoring of patients' vital signs. The manufacturer of this device is Dräger Medical Systems, Inc., a well-known company that produces medical equipment for hospitals and healthcare facilities. The device is most commonly used in intensive care units, operating rooms, and other hospital departments where continuous monitoring of a patient's health is necessary. This monitor allows healthcare professionals to monitor various vital parameters, such as heart activity through an electrocardiogram (ECG), pulse rate, blood pressure, respiratory rate, and blood oxygen saturation (SpO₂), depending on the installed modules and connected equipment. The measured values are displayed on the screen, allowing medical staff to observe changes in the patient's conditi ...

Vibrator 2 tubs WALTHER TROWAL type TA 2/145 Internal tub dimensions: L 840 mm x W 360 mm x Depth 470 mm Coating in good condition Loading from the top Unloading of parts through the front traps Functional machine Voltage: 380 V Dimensions (L x W x H): 2600 x 2000 x 1300 mm Weight: approx 4 T

Auction-ID: A1-51213-27

Analog Densitometer Macbeth RD-100, in exception good condition for its age, transistor lamps, in working condition.

Dräger Infinity Delta – Medical Monitor The Dräger Infinity Delta is a medical device used in hospitals for the continuous monitoring of patients' vital signs. The manufacturer of this device is Dräger Medical Systems, Inc., a well-known company that produces medical equipment for hospitals and healthcare facilities. The device is most commonly used in intensive care units, operating rooms, and other hospital departments where continuous monitoring of a patient's health is necessary. This monitor allows healthcare professionals to monitor various vital parameters, such as heart activity through an electrocardiogram (ECG), pulse rate, blood pressure, respiratory rate, and blood oxygen saturation (SpO₂), depending on the installed modules and connected equipment. The measured values are displayed on the screen, allowing medical staff to observe changes in the patient's conditi ...

Warman Pumps Listing 1.Pump Type: 3 / 2 CAH - Year of Manufacture: 2005 2.Pump Type: 3 / 2 CAH - Year of Manufacture: 2005 3.Pump Type: 3 / 2 CAH 4.Pump Type: AH Find more here - .ucymachines/ Contact us at - sales@ucymachines

Dräger Infinity Delta – Medical Monitor The Dräger Infinity Delta is a medical device used in hospitals for the continuous monitoring of patients' vital signs. The manufacturer of this device is Dräger Medical Systems, Inc., a well-known company that produces medical equipment for hospitals and healthcare facilities. The device is most commonly used in intensive care units, operating rooms, and other hospital departments where continuous monitoring of a patient's health is necessary. This monitor allows healthcare professionals to monitor various vital parameters, such as heart activity through an electrocardiogram (ECG), pulse rate, blood pressure, respiratory rate, and blood oxygen saturation (SpO₂), depending on the installed modules and connected equipment. The measured values are displayed on the screen, allowing medical staff to observe changes in the patient's conditi ...

length:1200 mm width:500 mm height:1260 mm

Deburring of sheet metal edges using rotating stainless steel brushes up to sheet thickness 6 mm

accumulator pressure: 780 bar 0: 38 ml Capacity: 55 kW control: Siemens KP400 weight: 3.300 kg Power connection: 80 kVA voltage: Hz 50 / 3 x 400 V range L-W-H: 3.240x1.200x2.800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -Max. flow rate: 38 l/min -Power HP pump: 55kW -Max. water temperature: 40 degrees -Operating voltage: 3x400V/50Hz -Connected load: 80kVA -Total current consumption: 115A -Curb weight: 2300kg -Control: Siemens Comfort Panel KP400 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oil filter Capacity: 3 x 120 l/min; 3 bar 3 x 140 l/min; 15 bar

max. wheel diameter:40-200 mm total power requirement:31,3 kW weight of the machine ca.:4 t dimensions of the machine ca.:1,8 x 2,2 x 1,8 m

Screen deck 2-fold, 60x100cm Coarse/Fine: 3mm/5mm Coarse/Fine 2mm/6mm 4 pieces in stock

KSS/filter/cooling systems Emulsion

weight of the machine ca.:4 t

weight max. in kg:3000 kg weight:330 kg Dimensions (L/W/H):800x320x430 mm

plate thickness:15 mm total power requirement:13 A 9 KVA weight of the machine ca.:50 kg dimensions of the machine ca.:1000 x 400 x 650 mm

cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm

workstation with dust exhauster

length:500 mm width:320 mm height:800 mm weight of the machine ca.:0,25 t Angular clamping device made by cast iron with 5 T-slotss 22 mm

material width:320 mm coil weight:2,6 t material thickness:0,5 - 2,0 mm coil internal diameter:400 - 510 mm coil external diameter:1200 mm no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:2 band speed:0 - 30 m/min power capacity:1,5 kW weight:1,5 t

material width:300 mm coil weight:0,5 t material thickness:0,4 - 3,0 mm coil internal diameter:420 - 520 mm coil external diameter:1200 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 diameter of draw-in rolls:50 mm power requirement:1,5 kW weight:1,55 t dimensions (WxDxH):2,5 x 1,2 x 1,8 m

weight max.: 5,0 t workpiece diameter: 303 x 2438 mm feed speeds infinitely variable: 0 - 1745 mm/min gear diameter: 305 mm gear width: 100 mm total power requirement: 0,5 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,5 x 1,05 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slitting device for Ferrum Entsteinmaschine, type EA,, equipped with 25 new circular knives,, suitable for plates with 50 holes, e.g. 34/20 (plums), With this device, the fruits, which are still divided during pitting, are cut on the underside by the scoring knives. As a result, the fruits are not injured when the stone is ejected.

Offered is a continuous-feed deburring machine with brush rollers and a separate extraction and dust separation system. Equipped with conveyor belt, brushing units, manual adjustment handwheels, feed rate controller, control panel and emergency stop switch. Inspection possible by appointment.

Boekels EMD7025 Metal detector Serial: BA7964 Stainless metal detector, stop and start with alarm reject, aperture 700mm W x 220mm H, overall length 2200mm, mobile, 3Ph

Hydraulic Breaker Rammer 3288 E 3 times available Hydraulic Breaker Manufacturer: Rammer Type: 3288 E Year of Make: 2020 Strike hours: -Hammer 1- 935h -Hammer 2- 722h -Hammer 3- 660h Carrier class: 26.0 - 42.0 to. Weight : approx. 2400 kg Adapter plate: Verachtert CW 45 S Other: not overhauled, sold with chisel and hydraulic hoses

Sludge Dewatering System Consisting of: 1 Screw Press (see Image I) - Dimensions: 2500 x 1500 x 2100 - Weight: 1 t. 1 Flocculant Preparation Unit (see Image II + Dimensions) - With agitator, filling system, and level probes - Capacity: 2000 l. Pumps of the Allweiler brand with Variator - 1 Feed Pump: 1.5 – 13.5 m³/h - 1 Dosing Pump: 45 – 275 l/h - 1 Dosing Pump: 150 – 880 l/h Conveying Equipment - 1 Trough Screw Ø 200 x 1370 - 1 Inclined Screw Ø 200 x 4500 Control System - Electrical Cabinet: 800 x 1000 x 300 - Connection Power: 8.8 kW - Separate pressure control - With manometer and regulating valve Output 300 kg/h, consisting of machine, conveyor and dosing pumps, coagulant station 2,000 lt. 2 conveyor screws, + control and all operating instructions. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Small format delivery / standing sheet delivery GUK Display for small format. It has its own drive motor, so it can be adapted to many folding machines. Art.Nr. L984

Small format standing sheet delivery GUK KS 310; cleaned and tested; Working width 310mm; Self-propelled. Smal fold vertical stacker GUK KS 310; cleaned and checked; working width 310mm; Automotive.

This material filler is equipped with a 1 kW electric motor. It can suck 2 kinds of materials into its large tank. The mounted controller can also regulate the ratio of materials. There are several of them. Other fillers, dyes and other machines are also for sale. Please see my other ads.

Construction Waste - Coarse – Sieve-SBR 4 Coarse material via rod sizer Fine grain over screen deck Capacity 140 cbm/h Manufacturer: BHS Type: SBR 4 Year of Make: 2020 Drive: 4 KW Weight: 5700 kg Dimensions: 4340 x 2990 x 2900 mm Location NRW Ex-site price net 33,000,-- € I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are net. If you don't like the price, please let me know your ideas. I am committed to realizing a price that meets your expectations. I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp) w.goldmannt-online

Coil weight: 1 ton Material width: 150 mm Coil exterior diameter: 1200 mm Expansion range: 480 - 520 mm Thickness: 0,5 - 4 mm

Coil weight: 2 x 2 ton Material width: 310 mm Coil exterior diameter: 1300 mm Expansion range: 380 - 460 mm Weight of machine approx.: 2,5 ton

Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.

Manufacturer: Mekanika, Type: Apstapler Rohholz, Control: Omron, Work piece width min-max mm: 40-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Vacuum feeding: yes, Crosswise feeding: yes, Stacking pattern, single-row: mehrreihig, Number of stacks: 2 Stapleplätze, Cycles approx.: 5, Number of sucking lines: Unigripper, Removal of protective boards: no, Feeding speed continous adjustable: yes, Feeding by cross conveyor: yes, machine ready for demonstration: yes, FREE TEXT: Platzbedarf ca.10 m X 7 m/Auflegestationen 5000 mm und 7500 mm,

Manufacturer: Bargstedt Abstapelanlage, Type: TSH 500/Q/30/12S, Year: 2005, Control: Homag, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 280-3000, Min.-max. workpiece height in mm: 12-60, Longitudinal feeding: yes, Stacking pattern, single-row: yes, Stacking pattern, double-row: yes, Number of stacks: 2, Stack height in mm: 1600, Removal of protective boards: yes, Erection in a pit: no, Year :2005

Manufacturer: Howial, Type: MGZ 238, Year: 1980, Control: hand, Work piece width min-max mm: 30-120, Min.-max. workpiece length in mm: 400-3000, Min.-max. workpiece height in mm: 12-60, Longitudinal feeding: yes, Stack height in mm: ca.600 mm, Feeding speed max m/min: 40, Pushing device with catch: yes, Year :1980

Manufacturer: Mechainak, Type: Handauflegestation, Year: 2005, Control: automatisch, Work piece width min-max mm: 30-200, Min.-max. workpiece length in mm: 100-2600, Min.-max. workpiece height in mm: 10-50, Crosswise feeding: yes, Stacking pattern, single-row: yes, Cycles approx.: ca.8, Feeding speed max m/min: 10-20, Feeding by cross conveyor: yes, Year :2005