van de wiele used for sale

New engine Lombardini LDW 1404 Deutz F4M1008F = no alternator, starter, flywheel, Exhaust manifold.

System: Used decanter / centrifuge Manufacturer: Alfa LAval Model: full coat screw centrifuge Type: AVNX 937 (or NX 4550) . No.: 501.8151.1994 B.: 1994 Drum inner diameter: 450 mm L/D = 5/1: Material: Stainless steel

Federal load - 1500 kg Federal width - 500 mm Outer diameter - Max 1250 mm Spreader range without attachment segments 310-460 mm, 410-560 mm High of lateral ditches. Strip lines approx. 470 mm Bc9eg37hb2 Speed of the reel shaft - 16 U / min, power 0,55 kW Manual spreading, adjustable -Torque limiter, soft start, - band drain brake -with push segments -hydraulically actuated process equipment â completely. Hydraulic unit mass - L 3300 B 1500 H 1500 mm

System: Used decanter / centrifuge Manufacturer: Flottweg Model: full coat screw centrifuge Type: Z53-4/454 . No.: 007-135-03 B.: 1999 Drum: max speed. 3250 min-1 Drum inner diameter: 529 mm Drive motor drum: Lander Type: ANGA-225ME-04A Voltage: 400 V Service: 55kW, 105A, 1465 U/min Hyraulikaggregat: Loher 1450 RPM Buying and renting possible.

Technical data: -Clip device -Glass Strip saw blade diameter approx. 300 mm -Pneum.. Material clamping - powered 400 V - Working pressure 7 bar -Air consumption per operation approx. 1.6 L / stroke -with: - Removal - roller conveyor with controlled positioning - level stop 3000 mm -Feed - roller 3000 mm - e - foot switch - regulator - space about B 4200 x H 1700 X 900 mm -Weight approx. 600 kg

Used centrifuge (with base) Speed performance: 2050 RPM Drum diameter: 610 mm Drum wall thickness: 14 mm Drum material: ST52-3N Weight: 5600 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Performance speed: 2200 rpm Drum diameter: 900 mm Drum wall thickness: 18 mm Drum material: 1.7382 Max capacity: 740 dm³ Max. Density: 1.4 kg / dm³ Weight: 10,500 kg Maximum operating temperature: 50°C Maximum operating pressure: 1 bar not ready for operation (major overhaul extra charge!)

Used centrifuge Performance speed: 1400 RPM Drum diameter: 900 mm Drum wall thickness: 16 mm Drum material: ST52-3 Weight: 11,500 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Performance speed: 2200 rpm Maximum operating speed: 1800 rpm Drum diameter: 909 mm Drum wall thickness: 18 mm Drum material: 1.7382 Max capacity: 740 dm³ Max. Density: 1.4 kg / dm³ Weight: 10,500 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Performance speed: 1400 RPM Drum diameter: 900 mm Drum wall thickness: 16 mm Drum material: ST52-3 Weight: 14.000 kg not ready for operation (major overhaul extra charge!)

Used centrifuge semi mobile (with base) Drive motor: 200 kW Type Rotodiff: 1120Q Type hydraulic: B/C 75-180 KE Performance speed: 1600 rpm Maximum operating speed: 1600 rpm Drum diameter: 1123 mm Drum wall thickness: 23 mm Drum material: 1.7380 Max capacity: 1600 dm³ Max. Density: 1.4 kg / dm³ Maximum operating temperature: 50°C Maximum operating pressure: 1 bar Weight: 19.400 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Drive motor: 200 kW Type Rotodiff: 1120Q Type hydraulic: B/C 75-180 KE Performance speed: 1600 rpm Maximum operating speed: 1600 rpm Drum diameter: 1120 mm Drum wall thickness: 23 mm Drum material: 1.7382 Max capacity: 1600 dm³ Max. Density: 1.4 kg / dm³ Maximum operating temperature: 50°C Maximum operating pressure: 1 bar Weight: 22,000 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Speed power: 3700 RPM Maximum operating speed: 3700 RPM Drum diameter: 350 mm Drum wall thickness: 10 mm Drum material: 1.4541 Max capacity: 75 dm³ Max. Density: 1.5 kg / dm³ Maximum operating temperature: 40°C Weight: 1.700 kg Overhauled, with Rotodiff

Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Drive motor: 11 kW Type hydraulic: Replacement C11 - 40Z Speed performance: 2050 RPM Drum diameter: 610 mm Drum wall thickness: 14 mm Drum material: 1.4571 Max. Density: 1.5 kg / dm³ Weight: 7200 kg completely overhauled, Stainless steel, ready for use

Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg overhauled, ready to use

Used centrifuge Semimobil (with base) Hydraulic: B/C 55-180 KE Speed performance: 1130/RPM Drum diameter: 1120 mm Drum wall thickness: 20 mm Drum material: ST52-3N Weight: 17,000 kg not ready for operation (major overhaul extra charge!)

right / left Number of spindles 4 Slide stroke 800 mm Drilling area in steel St-60 Full drilling dia. 15 mm Boring dia. 20 mm Drilling method Single-lip drill

Used centrifuge Speed performance: 3040 U/min Drum diameter: 552 mm Drum wall thickness: 12 mm Drum material: StE 460 Max. Density: 1.3 kg / dm³ Max. Item material temperature: 10 - 50°C Weight: approx. 5220 kg not ready for operation (major overhaul extra charge!)

Filter device for hydraulic oil Oil pump, Oil filter, Brand: Hydraulic equipment Vertriebsgesellschagt mbH Other details: Please see photos All information without guarantee

Sybermat Denester for "Hypacks" of 100 Syringes - Tubs of nested syringes arriving for example from a filling line, are denested by a robotic arm with suction cups into denesting combs. The syringes are then dispensed from the combs into the inspection machines or any other machine. Suitable for pre-filled syringes 10.85 mm diameter, max. 105mm long, output up to 20.000/hour. Year 12/2002.

Double door depyrogenation owen De Lama model DLST/L year of manufacturing 1998. Useful capacity 5440 liters. Supply voltage 380 V - 50 Hz Tri - phase. Installed power 157 kW. Maximum working temperature 250 C °.

System: Used decanter / centrifuge Manufacturer: Baker Hughes Model: full coat screw centrifuge Type: CP 3044 . Nr: 6299 Year of construction: 2001 Höchstzul. Speed: 3600 I/min Inner diameter drum: 448 mm Drum wall thickness: 11 mm Drum material: 50-LF2 Max capacity: 174 dm3 Zul.Dichte 1.5 kg / dm3 Total mass: 3880 kg

Siemens small X-ray/intraoral x ray system Heliodent MD (tube SR 60/70/7 0.7) • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Vacuum deaerator that removes dissolved or entrained air, prevents oxidation of product and eliminates color and flavor changes. Can be used for liquid products like milkproducts, fruit juices, soft drinks, sauces and so on. Including: Vacuum pump Sihi, (type: LEMA50), product discharge pump, APV WI + 55/35-220 190. Trimod Besta level sensor , interconnecting piping. Including control cabinet with Siemens S5 plc and HMI. HMI programm is running, PLC programm fails. YOM 1997, excellent condition.

1 of used level detector for bottles, make Heuft, type Basic HF-LT, new 2005. Over-/under-fill detection via high-frequency, optical closure and excessive closure height detection, "mono" pneumatic rejector, encoder. Rated at 22.000 bph.

ALFA-LAVAL DD500LC high-vacuum deearator for viscous products. Capacity up to 6000 lt/hr. Equipped with internal condensor and mechanical level controller.

Safeline Metal Detector Model: Signature Serial: 53973 Stainless Frame, belt dimensions 1800mm x 300mm, aperture 300mm x 120mm, pneumatic push arm reject with reject bin, 3Ph

Printing plate development machine Koenings KTW 653; good condition, cleaned and tested; 3 brushes; inlet width 650mm; suitable for waterless panels. Plate processor Koenings KTW 653; good condition; cleaned and checked; 3 brushes; width 650mm; Used for waterless plates.

30 cm image amplifier with 2 x magnifying glass function 100 Hz double monitor, Black Vision, 250 Image Memory Usb DFP, DAP Resolution 1.2 - 1.4 Lp/mm X-ray emitter scan replaced in 2019 Refurbished

Ziehm Exposcop 7000 Compact Specifications: 23 cm BV, digital CCD memory LIH, video printer , with single monitor, resolution 1.2 lpmm. Sending images via the BNC video output. 6 months warranty. Monitor test according to DIN 6868 Part 57 until 2025. Very space-saving only 1.48 m2! With integrated second monitor. KV / mA range: 0.1 mA / 40 kV to 5 mA / 120 kV, Dimensions L: 180cm, H: 180cm, W: 100cm.

Touchscreen High 1k x 1k resolution  Pulsed 2 kW monoblock generator up to 25 pulse/sec OBJECT Detected Dose Control (ODDC) 2 x TFT monitor on external monitor trolley Dicom Usb Laser 10,000 image memory CD-R Rome Printer Sony UP-960CE Built: 2012

Image amplifier with 23cm, 2 x TFT monitors with 50 Hz  Usb Laser crosshairs 1,000 image memory Patien Management (Road Map) built-in dose area meter Resolution 1.2 - 1.4 Lp/m Refurbished

on chassis

hardly needed

Y.O.M.: 1980 No.: 10027 Usable volume: 150 l Pressure double jacket: +1 bar Vacuum pump Pressure gauge, temp gauge Scraper agitator, three-way valve 3 intake ducts Lid to be opened via lifting pull Dimensions LWH: 1700 x 1000 x 2100 mm Weight: approx. 500 kg Products: e.g. mayonnaise, sauces, ketchup, cosmetics, creams etc.

ready to work

These systems are mainly used for processing sausage meat using stuffing machines. But other high-viscosity products from the food industry, such as marzipan, can also be tested with these devices for very fine metallic residues. The high-strength product tubes can withstand pressures of up to 55 bar. RD80/HP screw fittings are used for connection. The whole unit is height adjustable and movable, so it can be connected to all standard chargers. Optionally, the units are available with a connecting gear for direct connection to the calibrator. Suitable ejector valves are available for emptying the metal! Special features Compatible with all standard filling devices Optional ejector and/or connecting gear Protection class IP69K for all components All components in hygienic design Height adjustable via maintenance-free spindle drive M-Pulse2 controller 4 quadra ...

IRON SA 25000 ENC sheet metal decoiler was built in 2025 in Italy by Iron Srl. The machine, designed to automate production, has been equipped with state-of-the-art technology, which ensures the highest precision in decoiling coil strip. These include a worm gear reducer with overload clutch, an epicyclical reducer and four self-centring clamps with hydraulic expansion. The machine is controlled by a inverter and feedback encoder, which in turn enables controlled electrical braking. All this is complemented by a sturdy construction made of top-quality steel. The offered IRON 25 t sheet metal uncoiler is brand new and unused. The price also includes a CST coil lift table for easy loading of the coil directly onto the machine arm. The IRON SA 25000 ENC self-centring decoiler is part of the RNM coil strip handling line. The system is customisable and can be equipped with devices such  ...

clamping width: 200x75 mm : , max. clamping width: 200x120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laser sensor Error detection automatically Shape recognition Laser printer (DIN A4) Number 2 Monochrome cameras PHOTONFOCUS 160 MB Number 2 Barriers + Accessories

Ward Bekker Metal detector checkweigher Model: ACW25 Serial: 10012261 Stainless, Twin lane metal detector checkweigher, overall length 3400mm, belt width 75mm, max product height 100mm,

Safeline Model: Signature Metal detector Stainless frame, belt dimensions 1200mm x 150mm, aperture 200mm x 70mm, stop/start, with alarm, 3Ph

Lock Metal detector Model: Met30+ Stainless frame, slat chain belt, belt dimensions 1900mm x 80mm, aperture 140mm x 300mm, 3Ph

Thermo Scientific Metal detector Model: Apex 500 Stainless frame, elevates from 300mm to 950mm, pneumatic blow reject with reject bin, 450mm x 160mm, belt dimensions 3300mm x 320mm, 3Ph, mobile

2 pieces curve belt conveyor 180 degrees, helix for climbing bands with SEW - used -: Price per piece from location: 2.995.-€ (net)! Manufacturer: Transnorm Type: 1600-105 Helix Built: 2011 Conveyor curve 180 degrees Nominal radius: 600mm Rated width: 700mm Condition: good Available: now Location: Bautzen warehouse

Decorative holding card TMCC

Vacuum deaerator Manufacturer: Fryma Type: VE 3 Machinenumber: F703419 Operating hours pump: 158 h Netzsch pump NL 50 A Vacuum pump Dimensions LWH: 2800 x 1250 x 2250 mm Weight: approx. 1000 kg

Motan conveyor incl. rotary wing level monitoring

The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm