van de wiele used for sale

; Gross weight [kg]: 2016; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 349

This 5-axis TORNOS Delta 20/5 was manufactured in 2008. It features dual spindles, each capable of handling bars up to 20 mm in diameter and 170 mm in length, with speeds up to 10,000 rpm. Powered by a Fanuc Series Oi-TD CNC and equipped with a Robobar barfeed magazine, this swiss type turning machine is ideal for precision work. Contact us for more information about this machine.

x-travel: 350 mm y-travel: 150 mm z-travel: 340 mm table surface area: 600 x 210 mm spindle taper: SK 40 spindle turning speed range: 40 - 2000 U/min feeds: 5 - 500 mm/min rapid traverse: 1,2 m/min total power requirement: 1,9 kW weight of the machine ca.: 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kompressor / Compressor Gardner Denver KTA100-1C Baujahr / Year 2007 - SN. 2708758 100 m3/h

Hydraulic injection moulding machine manufactured in 2009. This SUMITOMO SHI DEMAG Systec 210/580-1450 features a clamping force of 210 t and a screw diameter of 50 mm. It offers a maximum specific injection pressure of 2426 bar and a maximum swept volume of 530 cm³. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 210/580-1450 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2011. This SUMITOMO SHI DEMAG Systec 25/320-80 features a clamping force of 25 t and a screw diameter of 18 mm. It offers a maximum metering volume of 23 cm³ and a mold height range of 130 mm to 480 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 25/320-80 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2013. This SUMITOMO SHI DEMAG Systec 120/470-430 features a clamping force of 120 t and a screw diameter of 40 mm. It offers a maximum metering volume of 231 cm³ and a distance between tie bars of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 120/470-430 machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2019. This SUMITOMO SHI DEMAG Intelect 2 50/360-110 features a clamping force of 50 t and a screw diameter of 18 mm. It offers a maximum specific injection pressure of 2800 bar and a maximum dosing volume of 23 cm³. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Intelect 2 50/360-110 machine we have for sale. Contact us for further details.

Key data: 300 mm, 150 mm, 300 mm

Universal Milling DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Spindle speed: from 40 to 2000 RPM Table size: 600 x 210 mm Horizontally tiltable head Straight table Spindle motor: 2 speeds Motor: 1,3 kW Feeds: X - Z auto / Y manual Voltage: 380 V Width: 1200 mm Depth with electrical panel: 1200 mm Height:1600 mm Weight: approx 900 kg

Key data: 1185 KW, 1000 1/min

BECAUSE OF NEW MOTORIZATION THIS VERY NICE DEUTZ SBV6M 628 SHIP ENGINE REMOVED IN ROTATING CONDITION

milling machine, year 1996, CNC TNC 426. Used machine. More info & price on IndustrialBuyer.

Milling machine DECKEL FP3 - 500x300x400 mm, DRO, Information about technical data are not binding., Machine available subject to prior sale, Working table size: 800x420 mm, Longitudinal travel x axis: 500 mm, Cross travel y axis: 300 mm, Vertical travel z axis: 400 mm, Spindle taper: 40 SK, Spindle speed: 40 - 2000 rpm, Number of spindle speeds: 18, Spindle motor power: 3 Kw, Quill spindle travel: 100 mm, Working feed x-z axes: 5 - 500 mm/1, Rapid feed x-z axes: 1.500 mm/1, Number of working feeds: 18, Weight: 1.200 Kg

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: Sinumerik 840D spindle turning speed - stepless: 20 - 18.000 U/min power capacity at 40 % load: 28,00 kW power capacity at 100 % load: 19,00 kW max. torque on the spindle: 121 / 82 Nm spindle taper: HSK-A63 B-axis: -10 - +180 ° c-axis: 360 x 0,001 ° feed X/Y/Z-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z: 60,00 m/min feed B-axis: 1 - 10.800 °/min rapid traverse B-axis: 30,00 U/min size of pallet: 800 x 630 mm max. workpiece diameter: 800 mm workpiece height max.: 1.330 mm table load: 1,20 t toolpiece magazine: chain magazine: 180 Stück tool diameter: 80 mm tool diameter with 2 vacant positions: 160 mm tool length - max.: 450 mm weight of tools max.: 15,00 kg total power requirement: 57,00 kW weight of the machine ca.: 22,00 t dimensions of the machine ca.: 8,50 x 5,50 x H3,80 m 5-axis-machining center with SIEMENS Sinumerik ...

cutting diameter: 340 mm dimensions of saw-blade: 4860 x 32 x 1,1 mm cutting range square: 340 x 340 mm cutting speed: 17 - 120 m/min drive motor: 4 kW weight of the machine ca.: 2,5 t dimensions: ca. 2600 x 2600 x 1650 mm ncl. chip conveyor and chip tray Hydraulic bundle clamping device incl. electrical circuit diagrams the previous owner only sawed at one speed Adjustable cutting pressure valve HSS bimetal saw band Hydraulic material and saw band tensioning with electrical monitoring Automatic height adjustment of the saw frame Automatic adjustment of the movable band guide arm Electrical piece counter Digital display of the dimension preselection Constant, hydraulic clamping of the carbide band guides The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003

Demag Ergotech EXTRA 50-200 BJ2005 for sale/scrapping, but the control is already missing here.Enclosed you will find the photos and technical data of the machine for sale with BJ 2005. The machine currently has a plasticizing unit with 25mm screw (BJ 2014) installed, we sell the original plasticizing unit with 30mm screw that is still working for the machine. The machine worked until it was taken out of service, we installed the control system on another machine.

Univ. swivel, tilt and turn table presumably DECKELUniversal tool milling machine attachment tableTable size: 700 x 400 mmGroove width: 14 mmGroove spacing: 46 mmMounting plate: width 550 mm x height 300/240 mm- Swivel and tiltable +/- 30- Rotatable 360Weight approx. 140 kg; used

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Univ. Swivel, Tilt and Turn Table DECKELUniversal Tool Milling Machine Attachment Table suitable for FP 2L or FP 3L or FP 4LNr. 2314-0301 Year of construction: approx. 1975Clamping surface: 1000 x 520 mm- 6 clamping grooves 16 mm, distance 90 mm- Clamping plate can be rotated horizontally to the right and left up to 45 degrees- Tiltable from/to the machine +/- 15 degrees- Swivel +/- 15 degrees- Swivel table, tilting table, angle tablePermissible load max. 1000kgWeight: 400kggood condition; used

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. tool milling machine directly from one resolutionMilling machine DECKEL type FP 4Masch. No. 1/0687 Year of construction 1978Travel X: 700 mm, Y: 400 mm, Z: 450 mmTable clamping surface 860 x 500 mmSpindle holder SK 40 - M16Spindle speed 31.5 - 1600 rpm. 18 stepsQuill displacement horizontal and verticalMain spindle drive 4 kWNet connection 380 volts, 50 Hz- Digital display 3-axis HEIDENHAIN- Universal swivel-tilt turntable- Coolant device in the machine base- Machine vice- none

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

Hydraulic injection moulding machine manufactured in 2005. This DEMAG D 650 features a clamping force of 6500 kN and a screw diameter of 80 mm. It offers a shot weight of 1,600 g and includes a handling system by Wittmann. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 650 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2007. This DEMAG D 1300 features a clamping force of 1300 t and an injection weight of 5200 g. It includes a handling system with a Wittmann DR 853 robot, offering impressive Z, Y, and X-axis strokes of 3500 mm, 2500 mm, and 1600 mm respectively. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 1300 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2015. This DEMAG D 420 features a clamping force of 420 t and an injection weight of 1100 g. It includes a handling system with impressive working strokes of Z=2500 mm, Y=1600 mm, and X=900 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 420 machine we have for sale. Contact us for further details regarding this machine.

Suspension crane runway Crane system DEMAG type KBK 1Year of construction approx. 2000Monorail overhead track with monorail crane bridgeLight crane system system made of KBK modular system profilesLifting capacity: 125 kgSpan: 5 metresDistance longitudinal rails: 4.1 metresLongitudinal beam length complete: 12 metresGirder profile cross beam = KBK1Girder profile longitudinal rails = KBK1Consisting of:29 metres System profile KBK-1 (4x 6000 mm + 1x 5000 mm)1 piece carriage for the crane suspension2 pieces Double carriage for the longitudinal rails10 pieces Screw claws for the

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801899 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.7 metersPower supply: 400 volts, 50 Hz1 load train = 100 kgWeight 16.5 kgGood condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801900 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.8 metersMains connection 400 volts, 50 Hz1 load string = 100 kgWeight 16.5 kgGood condition; used

Electric chain hoist crane DEMAG type PM 12LF ManuliftElectric crane with one-handed operationFabr. No. 5877813 year of construction 1990Load capacity 125 kgHook travel 3.5 metersLifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0.32 / 0.05 kWNeching connection 400 Volts, 50 Hz1 Load train = 125 kgManulift Hand control directly on the crane hookGood condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 10-500-K-V3 F6Fabr. No.: 61077868 Year of construction: 1999Load capacity 1000 kgHook travel 6.5 metersMain lifting speed 10 m/min. Fine lifting speed 1.6 m/min.2 load trains = 1000 kgPower supply 400 volts, 50 Hz.- Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, beam width 120 to 280 mm- 2 travel speeds 4.6 m/min and 14 m/min- Cable length of the control bottle 4.5 metersWeight 130 kggood condition; used

Electric hoist, crane, electric wire rope hoist, winch DEMAG type P 10Fabr. No. 941 477 Year of construction 1962Lifting capacity 2000 kg at 4 stringLifting height 5 metersLifting speed 6 m/min. Fine stroke speed 1.3 m/min. Reeving 4/1Motor power 0.6 / 2.6 kWNet connection 380 volts, 50 Hz- DEMAG hoist, type 19/11 K28P- DEMAG electric chassis, type 13 / 6 K8- 1 travel speed approx. 19 m/min- Chassis for double T-beams, beam width 120 to 180 mm- Load hook for 4 load trains- Control bottle for the hoist

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 34338 Year of construction approx. 1965Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 200 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stagesMotor power 1.0 and 1.5 kW pole-switchableMains connection 380 volts, 50 Hz- 3-axis digital display HEIDENHAIN, type VRZ 753 B- Spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with

Double diaphragm pump with air drive DEPA type DH40-FA-ZRTDreactive air diaphragm pump, double pumpSeries No.: B1802498 year of construction 09.05.2018Temperature: max. 130CBau size: 40Grain size: max. 16 mmSuction height: approx. 2 mSuction height product filled: approx. 9 mOperating pressure: max. 7 barAir connection: 3/8Suction connection: 1 1/2Pressure connection: 1 1/2- self-priming- Aluminium housing- Diaphragm plate made of stainless steel- Diaphragm made of nopped E4® PTFE- Balls made of PTFE- Ball seats made of stainless steelSpace required: L x W x H: 370 x

Double diaphragm pump with compressed air drive DEPA type DH50-FA-ZRTDoduct diaphragm pump, double pumpSeries No.: B1600416 year of construction 26.01.2016Temperature: max. 130CBausize: 50Grain size: max. 18 mmSuction height: approx. 2 mSuction height product filled: approx. 9 mOperating pressure: max. 7 barAir connection: 3/4Suction connection: 2Pressure connection: 2- self-priming- Aluminium housing- Diaphragm plate made of stainless steel- Diaphragm made of nopped E4® PTFE Composite balls made of PTFE- Ball seats made of stainless steelSpace required: L x W x H 550 x 350 x

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

Column-mounted slewing crane DEMAG type KBK 100Year of construction approx. 2008Lifting capacity 80 kgSwivel range 270 Radius 2500 mmOverall height 1980 mmHeight to lower edge boom 1580 mm- Crane column KBK 100- Boom profile DEMAG C-profile cutter KBK 1- Base plate L x W x H = 260 x 260 x 25 mm (4 holes 18 mm)- painted yellow- Info about the short column, this slewing crane was mounted on a machine stand. The last picture shows a slewing crane mounted hangingdead weight approx. 100 kggood condition; used

Wall slewing crane DEMAG type KBK 2Demag No. boom: KBK- 982 040 44Demag No. wall bracket : 85104044Year of construction 2000Lifting capacity: 500 kgRadius: 4000 mmSwivel range 270Wall mounting plate: 1170 x 440 mmHeight UK- Boom to OK- Wall bracket: 1000 mmFlange plate Wall bracket to middle Bolt: 270 mmTotal length Flange plate Wall bracket to boom tip: 4330 mm: - Boom profile C-profile rail DEMAG KBK 2- Carriage for C-profile rail DEMAG KBK 2- Original paint yellowWeight 170 kgVery good conditionPrice without

Crane Motor, Travel Drive Crane Bridge Drive with GearSliding Armature Motor, Thrust Bencher Motor, Three-Phase Electric Motor, Brake Motor, Crane Motor, Rope Hoist Drive, Crane Drive, Lifting Motor, Fine Stroke MotorManufacturer: DEMAGMotor Type: 24/10 KF8-2Motor No.: 982869Motor Design: B5Rated Voltage: 380 VAC Rated Frequency: 50 HzPower Level 1: 0.58 kW = 715 rpm. Power level 2: 2.3 kW = 2900 rpm.with gearbox DEMAG type KS 12Reduction gearboxFabr. No. 1909104Translation: i = 118with impeller for crane rail2 pieces available,

Column slewing crane DEMAG type KBK 1Year of construction: approx. 1980Lifting capacity 500 kgSlewing range 270Radius 2000 mmOverall height 2300 mmHeight to lower edge boom 1800 mm- Boom profile DEMAG C-profile rail KBK 1- Carriage for DEMAG C-profile rail KBK 1- Base plate crane column L x W x H = 370 x 370 x 20 mm (4 holes approx. 27 mm)Net weight 145 kg; used