van de wiele used for sale

Dematic conveyor system Accumulating roller 40000-500-440 RA2344 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 40000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.3 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...

Dematic conveyor system Accumulating roller 12000-500-440 RA2345 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 12000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Stowage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.5 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...

- Cylinder head for Deutz 440 - K - New and original packaging - stored in a dry place - Manufacturer quality

Dematic conveyor system Accumulating roller 24000-500-440 RA2346 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 24000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Stowage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.5 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...

Key data: 11 , 1 , 250

Claw compressor Gardner Denver ( Elmo Rietschle ) C-DLR-250, UNUSED. Capacity 250 m3 / hour; 11 kW; EX motor; maximum pressure 1,8 bar; 2950 round per minute; Dimensions L 1450mm, H 1100mm, W 950mm Electric connection 400 V

Dematic roller curve right or left 90°-660-590 IR865 RA2322 Make: Dematic Running direction: 90° right running/ left running Roller width (RB): 590 mm conical, plastic coating Nominal/outer width (NB): 660 mm Inner radius (IR): 865 mm 3x 300-500V, 0,37kW Height frame: 132 Height including motor: 275 Gear motor: SEW Conveyor speed: between 0,142 and 1,42 m/s with Optionally available: frequency converter for freely adjustable conveyor speed Supports Side guides one and both sides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 865 Nominal / outside width in mm: 660 Roll width in mm: 590 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply ...

Dematic roller curve right 90°-500-440 IR795 RA1680 Make: Dematic Running direction: 90° right running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 795 mm length: 1790mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look for ...

Dematic roller curve right 90°-600-540 IR795 RA1653 Make: Dematic Running direction: 90° right running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 797 mm length: 1790mm Overall height frame: 132 mm Height including motor: 275 mm Motor MOVI-Mot 3x300-500V 0,37kW 1400 u/min max Brake 220-240V Gear motor: SEW WF20 DT71D4/BMG/Z/MM03 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) Features: Drive type: Round belt Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will  ...

Engine Brand: DETROIT DIESEL, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-12v92ta-812 3-7400-used/830, , = More information =, , Type: Engine, Empty weight: 2.350 kg, Type number: 12V92TA 8123-7400

Schneider stream delivery tables. standard and extended. Both in production ready condition, for envelope delivery, etc.

DEUTZ-MWM TCG 2032 CYLINDER HEAD DEUTZ-MWM TCG 632 CYLINDER HEAD

Many elements of the engines are susceptible to being reconditioned when they begin to deteriorate. RS MOTOR has the capacity to recondition these elements and also a very large stock of them, this allows us to proceed with the repair at any stoppage at the plant, avoi-ding stops and high investments. The use of reconditioned elements can also be consideted in maintenance steps of some relevance. Some of the refurbished items that are normallu in sotcks are: CYLINDER HEADS COMPLETE ENGINES BLOCKS INTERCOOLER ACTUATORS PUMPS ...

Dematic roller conveyor right with straight section 1000-90°-500-440 IR795 RA2356 Make: Dematic Direction of rotation: 90° right-running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm Length of straight section: 1000 mm Frame height: 132 mm Overall height including motor: 275 mm Conveying speed: 0.33 m/s Drive type: Round belt Electrical details: Motor type: SEW geared motor Motor power: kW 0.25 380V Optional: Supports Side guides Frequency converter for stepless speed control convertion to left Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For ind ...

Dematic conveyor system Accumulating roller3000-600-540 RA2361/61.1 Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 3000 mm Condition: good (used) Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Accumulation slot size: 625 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 62,5 mm Wheel diameter: 50 mm Partly rubberized for more grip when braking Drive module RA2361: Drive types: SEW geared motor Conveying speed: approx. 0.5 m/s Electrical data: 380-400V kW depending on total length The extension module always requires a drive module! Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides element length can be shortened up to 3m Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good ( ...

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 310 tool taper: SK 40 speeds: 20-4500 U/min weight of the machine ca.: 3 t dimensions of the machine ca.: 2,15 x 2,00 x 2,50 m Equipment/accessories: -swivel rotary table -documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tea biscuit cutter / pastry harp Dedy Year of manufacture not known Made entirely of stainless steel or aluminium, Dimensions: approx. 42 cm width, 50 cm depth and 10 cm height

I/01 MODUL CAMBUS RS - 12404580

FULL WEIGHING AND BAGGING LINE - EXCELLENT CONDITION FULLY WORKING COMPLETE WITH STAINLESS STEEL GANTRY, INCLINE FEED CONVEYOR AND OUTFEED CONVEYOR GEA SMART PACKER GX250H - VERTICAL FORM FILL SEAL BAGGER 250MM JAW MACHINE NO: 12330 YEAR: 2017 WEIGHT: 950KG 415V MULTIPLE TUBE SETS ISHIDA MULTIHEAD WEIGHER MODEL: CCW-RVE-216B-10/15-SS MACHINE NO: 560012161 16HEAD YEAR: 2017 240V WEIGHT: 535KG PLEASE DO NOT HESITATE TO CONTACT FOR MORE INFORMATION

SINGLE MULTIHEAD WEIGHER FEEDING - 2XBAGGERS MACHINES ONLY WITH TWIN OUTFEED CONVEYORS - NO GANTRY ISHIDA MULTIHEAD WEIGHER MODEL: CCW-RS-216B-2D-30-SS YEAR: 2011 16 HEAD ILAPAK TWIN BAGGERS YEAR: 2011 MODEL: VEGATRONIC 500 300MM JAW

Michael Deckel S0E Stylus Tool Grinding Machine, SOE Weilheim TOP Condition Total weight approx. 90kg Top grinding wheels with an outer diameter of up to max. 100mm are used Absolute top condition! Only one overhauled machine has a slightly superficial patina the bare metal parts. The pictures speak for themselves. The workshop dream in Reseda green :-) Plug with phase inverter

Bottle Leak Detection System – WILCO Wilcomat R18 SQ/FS High-performance bottle leak detection system designed for quality control in beverage and liquid packaging lines. The WILCO Wilcomat R18 SQ/FS ensures reliable inspection of bottles to detect leaks and maintain product integrity during high-speed production. General Information - Manufacturer: WILCO - Model: Wilcomat R18 SQ/FS - Year of Manufacture: 2006 Technical Specifications - Production Capacity: 35,000 bottles per hour Application - The system is designed for automatic leak detection of bottles in high-speed packaging lines, ensuring that only properly sealed containers continue through the production process. Typical applications include: - Bottled water - Soft drinks - Dairy beverages - Juices and other liquid products Key Advantages - Reliable WILCO leak detection technology - Suitable for hi ...

Dematic conveyor system Roller conveyors 20370-600-540 RA2369 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL):20370 mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Electric data: 380-415 condition: gut Conveying length in mm: 20370 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5 Driven:  ...

Dematic conveyor system Roller conveyors 19500-600-540 RA2370 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL): 19500mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Electric data: 380-415 condition: gut Conveying length in mm: 19500 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5 Driven:  ...

I am pleased to offer for sale the complete Heat Recovery Steam Boiler with gas burner. Please see below key details about the power plant: Boiler Manufacturer: GEA - DELTAK Capacity: 20 ton / hour at 25 bar Year of Manufacture: 2006

Key data: 200 KW, 225 kVA, 400 V

1 emergency generator with Deutz diesel engine and Siemens generator, Power 225 kVA = 200 kW, 400V/3PH/50Hz, Start with 20 bar compressed air, complete with 2 pressure vessels and matching compressor, approx. 1,000 operating hours, still completely operational

Key data: 588 KW, 380 1/min

In very good condition Rotating Removed due to scrapping of ship

Tool diameter: mm sanding disc diameter: mm Motor output: 3 kW total power requirement: 3 kw Weight: 1.400 kg Overall size: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Düspohl, Type: DEA 150, Year: ca.1995, Control: hand, Pneumatical clamping system: yes, Schnitthöhe min-max mm: 120, Schnitttiefe min-max mm: ca.150 -150, Power saw engine kW: ca.3, Action controlled: yes, Saw blade diameter max mm: 350, rotations controlled: 4500, Year :ca.1995

with 63 filling valves and 16 head crown corker 26 mm with double pre-evacuation system Work direction: from right to left Product: beer and other products with CO2 Capacity: approx. 25.000 bph - by 500 ml bottles approx. 30.000 bph - by 350 ml bottles More technical details you can see on the technical data sheet. Complete documentation, manual, spare part list, electrical documentation are available. The filler was in production in a Germany brewery and can be inspected on side.

Offer 22111 Specifications: - Hoist HADEF type CH 2 Bj.07, load capacity 500 kg - Portal load capacity 500 kg - Hook height approx. 2450 mm - 2 lifting speeds 8.0 + 2.0 m/min - Manual trolley suspension - Passage between the driving stations approx. 2750 mm - Passage height lower edge of portal girders approx. 2900 mm - Travel beam approx. 1500 mm - 4 swivel castors - Total width approx. 3050 mm - Total depth approx. 1500 mm - Total height approx. 3050 mm - Drive 400 V - Total weight – crane + hoist approx. 250 kg

Manufacturer: Delle Vedove, Type: Profilleistenschleifmaschine, Monting of the machine: 8 Schleifaggregate, Program: yes, Axis control: yes, Work piece width min-max mm: 10-250, Min.-max. workpiece height in mm: 6-80, Work piece length min-max mm: 300, Sanding width mm: 2500, Sanding hight mm: 80, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Surface sanding units: 2, Profile sanding units: 6, Monting of the machine: 8 Schleifaggregate,

Manufacturer: Hoffmann, Type: DEA, Year: ca.2000, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Glue high-pressure pump: Niederdruckbehälter, Glue quantity setting: yes, Dübeln horizontal: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dübelgrösse mm: 8 X 30, FREE TEXT: Maschine wird gereingt und geprüft vor Auslieferung, Year :ca.2000

- Filter surface area: 3m2 - Evacuation: manual Equipment : - Control window with inlet and outlet lighting - Circulation pump - Adjustable dosing pump - Agitator - Connection: butterfly valves, Friedrich n°2 40 Dimensions : - Length: 1750 mm - Width: 700 mm - Height: 1000 mm - In working order

Bar diameter 26 mm 12 live tools Turning lenght 180 mm Controller FANUC 16i-TB Spindle speed 12.000 rpm With barfeeder

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 130 x 50 mm Truss Type: SLB Agraffe: 5 HK Clear width: 3,500 mm Max. load per pair of trusses 2,500 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

REF-2391-B COMAS DRV 400 DOSING-DEPOSITING MACHINE WITH 5 NOZZLES Manufacturer: COMAS Model: DRV Type: 400 Serial no.: 3793 Year of manufacture: 2005 Dosing machine/depositor for the production of pastries Fitted with 5 standard conical nozzles (12 mm diameter) Voltage: 380V / 3-phase Working width: 400 mm Overall belt dimensions (mm): 2,200 x 530 (LxW) Overall machine dimensions (mm): 2,250 x 1,400 x 1,750 (LxWxH)

Dematic roller curve right 90°-600-540 IR830 RA2351 Make: Dematic Direction of rotation: 90° clockwise Insertion width/roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 830 mm, 900 mm to plastic coating Height frame: 140 mm Height including motor: 240 mm Electrical data: 3x 300-500V Gear motor: SEW Conveyor speed: 0.7 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 830 Nominal / outside width in mm: 600 Roll width in mm: 540/450 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or ...

Dematic roller curve left 90°-600-540 IR830 RA2351 Make: Dematic Direction of rotation: 90° counter-clockwise Insertion width/roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 830 mm, 900 mm to plastic coating Height frame: 140 mm Height including motor: 240 mm Electrical data: 3x 300-500V Gear motor: SEW Conveyor speed: 0.7 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 830 Nominal / outside width in mm: 600 Roll width in mm: 540/450 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by p ...

1 pcs used tool milling machine Make of lid Model FP 3 A Control Dialog 11 Technical data: Travel X,Y,Z 400,300,400 mm Clamping area 700 x 400 mm Quill stroke 80 mm Spindle drive 3kW Speed 3150 rpm Spindle holder SK 40 Machine dimensions L x W x H 2400/2200/1900 mm Machine weight approx. 2500 kg, Accessories: Grundig Dialog 11, fixed angle table, electronic handwheel, documentation Errors of technical data and prior sale excepted

The GM 25 S unit can be adjusted to your performance data. The blower stage has been completely overhauled. If you have any questions, please feel free to contact us.

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 120 x 50 mm Truss type: BX 120|50|13 Agraffe: 5 HK Clear width: 2,700 mm max. load per pair of trusses 3,150 kg, with the same. distributed load. (Note bay load) 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Control: Siemens Sinumerik 840 D Travel: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Mount: HSK 100 Tool magazine: 60-fold Gear spindle: 8,000 rpm Workpiece diameter max.: 900 mm Max. workpiece height: 1,450 mm Conveyor Coolant device with low-bed filter Coolant supply through the spindle 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser Aspirator

Key data: 50 KW, 420 V

Make: Deutz Engine Design made under license in China. Model: LH50GFTD Fuel: Syngas HZ: 50 Scope of supply: Engine, Alternator, Woodward Engine Control System, Control Panel Smartgen HGM9510, Synchronizer, Heat exchangers, Container, Radiator, Oil System, Batteries, Documentation. Price: € 20,000 each Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss type: SLB 100|13 Agraffe: 5 HK Clear width: 2,800 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Standard Features 2 roller system for thorough depilation Head scratcher also for the difficult to access head area Mobile on 4 castors Newly developed, reinforced transmission Special rubber racket (also on the back wall) Electric heating in an oil bath Integrated control and operating unit in the machine housing Swing-out rollers for cleaning the machine

Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 1/min Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface Ø 700 x 500 mm max. table load 200 kg Infrared Probe Workpiece Measurement

CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workare ...

Merck Hitachi 7490 Ri/Refractive Index Detector Merck Hitachi 7490 Ri Detector Flow cell 8 ul Flow rate 10ml/min Ri range 1.0 to 1.75

Technical data for the pallet racking system: Shelving system: Dexion Type: P 90 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 36,910 mm Number of fields per row of shelves: 09 pcs. Number of levels plus ground level: 03 pcs. The scope of delivery includes: 10x Pallet rack stand, used Material colour: sendzimir galvanised Type: 100|25 Profile dimensions: 100 x 100 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 6,000 mm high 1,100 mm deep 54x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 147 x 50 mm Truss type: SLB 147|18 Agraffe: 5 HK Clear width: 3,990 mm Max. load per pair of trusses 3,900 kg, with the same weight. Distributed load 108x Locking pin, used Material colour: sendzimir galvanised For securing the longitu ...

Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Power-operated tool clamps horizontally and vertically - Automatic speed manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual  ...