128,402 used machines on RESALE, but how to find them? Machine Search
geared motor, electric motor -Speed: 62 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Weight: 18 kg
geared motor, electric motor -Speed: 103 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 18 kg
geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 23 kg
geared motor, electric motor -Condition: unused -Speed: 189 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 24 kg
geared motor, electric motor -Speed: 59 rpm -Power: 0.37 kW -Design: B14 hollow shaft -Shaft diameter: Ø 25 mm -Brake -Protection class: IP 54 -Weight: 30 kg
Key data: 4000 mm, 1560 mm, 32
CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...
geared motor, electric motor -Speed: 33 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 20 kg
geared motor, electric motor -Speed: 33 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 20 kg
Hydraulically switchable gearbox for change of direction of rotationHydraulic reverse gear of latheYear of construction approx. 1985Alternating gearbox for fast change of direction of rotationClockwise or counterclockwise rotation- electric hydraulic pump for hydraulic pressure generation (380 volts, 0.25kW)- 2 pieces of solenoid valves for switching from left to clockwise rotation- equipped with pulleys 230 and 200 mm- was driven by a 15 KW drive motor, fast change of direction of rotation with high torque transmission- Drive motor always runs on the right, gearbox is hydraulically activated
geared motor, electric motor -Speed: 34 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 20 kg
Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700
geared motor, electric motor -Condition: Geared motor is unused -Speed: 33 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 4x geared motors available Price: per piece -Weight: 20 kg
geared motor, electric motor -Speed: 2.5 rpm -Power: 0.11 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 2x geared motors available Price: per piece -Weight: 22 kg
Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via
geared motor, electric motor -Speed: 100 rpm -Power: 0.37 kW -Design: B3 angle -Shaft diameter: 20 mm -Brake -Protection class: IP 55 -Weight: 20 kg
1 of used gearbox, Lenze type 52.162.06.000, ratio I=15,53. Overhauled with new bearings, seals, oil, silent block and spider.
1 of used gearbox, Lenze type 52.162.06.00, ratio I=10. New 1994. Overhauled with new bearings, seals and oil.
1 of used gearbox, Lenze type 52.110.10.14, ratio i=15. Example pictures only. Various mounting bracket versions available. Enquire for details.
1 of used gearbox, Lenze type GKS04-3 N HBR 1C, i=16,087. Overhauled and fitted with new seals (except output side) and oil (CLP 460).
1 of used gearbox, Lenze type 12.602.12.6.4, ratio i=6.3. Can also be supplied in overhauled condition. Enquire for details.
1 of used gearbox, make Lenze, type GKS04-2 N HBR, 0804, A 000, 81 NM, 171,2 r/min, CLP 460, i = 8,178.
Right-angle gears, as good as new
Geared motor, electric motor, three-phase motor -Speed: 63 rpm -Power: 0.25 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Weight: 9 kg
Geared motor, electric motor, three-phase motor -Speed: 47 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 44 Price: per piece -Quantity: 2 available -Weight: 23 kg
A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible.
Right-angle gears, as good as new
A gear flank grinding machine Reishauer, completely overhauled by Burri Werkzeugmaschinen, is available. Grinding spindle speed: 3500rpm, cutting speed: 63m/s, max. gear diameter: 360mm, module range: 0.1-7, number of teeth: 6-600, max. workpiece height: 160mm, max. helix angle: +/-45°, max. workpiece weight: approx. 60kg. Min. wheel root circle diameter: 250mm, grinding wheel dimensions X/Y/Z: 350mm/104mm/160mm, grinding worm diameter range: 270mm-350mm, max. grinding width: 175mm, max. workpiece speed: 800rpm. Includes profiling devices, balancing device, structure-borne noise contact control, compact filter system, cooling unit, cooling water recooler, robot automation, and transport trolleys. Documentation available. An on-site inspection is possible.
geared motor, electric motor -Speed: 18 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 30 mm -Brake -Protection class: IP 54 -Dimensions: 560/230/H210 mm -Weight: 33 kg
geared motor, electric motor -Speed: 98 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: Ø 15 mm -Protection class: IP 55 -Weight: 10 kg
geared motor, electric motor -Speed: 98 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: Ø 15 mm -Protection class: IP 55 -Weight: 10 kg
geared motor, electric motor -Speed: 98 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: Ø 15 mm -Protection class: IP 55 -Weight: 10 kg
max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 kg dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8631 Type: OFA 16 A Producer: TOS Created: 1976 Parameters: Machine weight: 3550 kg
Lifting capacity: 52t, drive shaft diameter of the hollow shaft: 245mm, brake shaft dimensions: 100x190mm, drive shaft dimensions: 80x140mm, ambient temperature: -15 to 45°C, center distance: 1105mm, rated power: 275kW. The gear is still unused. An on-site inspection is possible.
Cleanable transport screw Brand: van Beek (The Netherlands) YOM: 2016 Screw length: 1550mm Screw dia: 310mm The screw can easily be extended to clean. Dimensions ready for use: LxWxH 2800mm x1300mmx1150mm Dimensions ready to clean (extended) LxWxH 4250mm x1300mm x 1150mm Condition: very good Video's available.
geared motor, electric motor -Speed: 98 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: Ø 15 mm -Protection class: IP 55 -Weight: 10 kg
geared motor, electric motor -Speed: 150 rpm -Power: 0.1 kW -Design: B3 -Shaft diameter: Ø 10 mm -Protection class: IP 65 -Weight: 4 kg
geared motor, electric motor -Speed: 33 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 55 -Weight: 13 kg
Gearbox, spur gear -Drive shaft: Ø 25 mm splined shaft -Dimensions: 220/190/H185 mm -Weight: 10 kg
Gearbox, spur gear -Drive shaft: Ø 25 mm hollow shaft -Hollow shaft: Ø 24 mm -Dimensions: 220/190/H185 mm -Weight: 14 kg -Translation: 1:20
Gearbox, spur gear, angle gearbox -Drive shaft: Ø 20 mm -Hollow shaft: Ø 19 mm -Dimensions: 220/200/H200 mm -Number: 9x gearboxes available Price: per piece -Weight: 7 kg -Translation: 1:9.92
Gearbox, spur gear, angle gear, reduction gear -Drive shaft: Ø 20 mm -Dimensions: 200/180/H200 mm -Weight: 11 kg -Translation: 1:13,8
Gearbox, spur gear -Translation: 1:2,9 -Drive shaft: Ø 19 mm -Drive shaft: Ø 19 mm hollow shaft -Dimensions: 260/240/H180 mm -Weight: 12 kg
Key data: 630 mm, 8
A used gear pusher Lorenz S8/630 with interchangeable wheels.
geared motor, electric motor -Speed: 13 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54/65 -Number: 2x motors available Price: per piece -Dimensions: 430/200/H180 mm -Weight: 17 kg
maximum number of results exceeded
please refine your search
