vacuum systems used for sale

Dormatec AirBench FN066784A - Extraction table The extraction tables are suitable for all types of contamination (metal, plastic, stone, wood, glue steam, etc.) thanks to a variety of filters. Dust, steam or smoke are immediately extracted through the work surface. The extraction tables are available in different sizes and configurations. All you need is a power outlet, plug and play! The FN extraction table, like the FP model, is a welded steel table with a load capacity of 150 kg on the tabletop and has access to the filters at the front of the table. Construction of the FN suction table - Industrial design - Robust welded filter housing made of sheet steel 2 mm - Steel surface in sheet steel 3 mm - perforated slide. 4 mm - Surface treatment: Powder coating in RAL 7035 (light grey) Filter - A - Non-sparking dust Aluminum, plastics, atmospheric dust, flour or simi ...

SIDEROS Model ECO 6 HC Year of construction 2006 7.5 KW

Kodak Trndsetter Q800 with developer year 2016. Model TJ1903 developer EL125T In production X speed, 42 plates per hour software

Manufacturer: Bär Type of Machine : Coolant Cleaning System Year of Manufacture: 2015 Voltage Supply: 3L/ N/ PE 400 VAC / 50 Hz Control Voltage: 24 V DC Connection Rating: 185 kW / 350 A Max. Fuse Protection: 400 A Minimum Cable Cross-Section: 240 mm² Find more here - / Contact us at -

CTP thermal plates 58000 plates hand feeding plate stacker Server Workstation TIFF shooter

Used roll line KEMPER, type: Quadro Round -in bakery condition- For square, round and long-rolled rolls. - KEMPER Relaxer - WP KEMPER Quadro Round with 5 rows - With SIEMENS Simatic Touch control - Relaxation band - Long scooters and wrapping - Deduction AB 800-1000 - Sprinkling device - Including many different cutting rollers and warp knitting drums Weight range round: 40 - 150 g Weight range square: 40 - 150 g round rolls: max. 7,000 pcs./h Square rolls: max. 10,000 pieces/h Visits and test runs are possible by arrangement.

Macsa id K series CO2 laser coding and marking equipment. Manufacturer: Macsa ID Type: SPA K-1030 Power supply: 125V/230V; 50/60 Hz; (1 phase+N) 660VA Marking head: KS2-1000-10.2 μm, CO2 sealed laser tube, RF technology, 10.2 microns Working distance: 85-400 mm Dimensions: 235x193x656 mm Weight: 40 kg IP54

Key data: 4 Meter, 13 t

Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 033.100 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 4 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty: 18 months from th ...

Key data: 4 Meter, 13 t

Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 039.660 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 3 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty 24 months from th ...

IKS Cooling System

We have a unit with Bitzer compressors for sale. System wit R744 refrigerant (CO2) The unit capacity is 22kW -35C To and -5C Tc. Control panel with frequency inverter.

Offer 25375 Specifications: - Working range / cutting length for approx. 5 m raceway approx. 3000 mm - Working range / cutting width approx. 1500 mm - Control BACH - Track gauge approx. 1900 mm - 1 plasma burner with height adjustment - Plasma source KJELLBERG Hi FOCUS 160 i - Cutting current at 100% ED 10 - 160 A - Cutting range steel approx. 5 - 50 mm - Cutting range aluminium approx. 5 - 35 mm - Cutting range stainless steel approx. 5 - 30 mm - Connection 400 V / 35 kVA - Extraction table with extraction system make TEKA, type Filtercube 4 H, built in 2010 - Weight approx. 4 T - Space requirement system approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction approx. L 1.5 x H 3.5 x D 1.5 m

Extraction Lissmac Type: DD 3200 BJ 2014 for Deburring Machines

Used head machine / dough divider KÖNIG, Type: Rex Industrie II - I-Rex 8 / 6 / 5 rows - Own integrated control system for individual operation - Weight range: up to 110 g Visits and test runs are possible by arrangement.

FOBA G5 Laser Engraving Machine LP100 with Swing Doors - With IMP-EMC Intelligent Mark Positioning for engraving systems (Camera for optical detection of the component position and alignment of the laser marking) - Jacket engraving unit - X/Y cross table round shaft guide - Deflection unit (TS10), mounted on the laser head, with standard lens (f=163 mm), Labeling field approx. 120 x 120 [mm] - Water/water cooler - Z-axis (with gearbox and servo drive), travel 500 mm - X/Y cross table round shaft guide Table top 250 x 250 [mm] with steel stop bracket, Travel distances 480 x 500 [mm], Max. load: 100 kg - - Servo axis control for all axes Operating System Windows XP Engraving Management Console (IMP-EMC) application software package Control panel with monitor, keyboard and mouse Design in laser protection class 1 Dimensions (W/H/D) 1100 / 2200 / 2200 [mm] � ...

CNC Prima Power Laser Cutting & Welding Machine TYPE: Optimo 2545 Basic: X= 4,500mm, Y= 2,500mm, Z= 1,020mm Length of the shaker (per PC): 4000 mm Width 2250mm/ Duty width: 3000mm Height: < 400 mm Process path (with coupled movement): 10,000 mm Loading capacity: 600 kg/m2 Max Speed: 0.5m/s Max acceleration: 0.5m/s2 Max kickback:

Compact bread roll line KÖNIG, type: GS 2000 For Kaiser rolls, long rolls, hot dog buns, normal round buns and flattened ones for hamburger buns. - Mini Rex 4000-S head machine - Weight range: 30 - 135 g - Knitting drums: SK58 and AK70 - Weight range: approx. 30 - 135 g - Capacity head machine: max. 4,000 pcs./h - Proofer capacity: max. 2,500 pcs./h - Condition: Good, well-maintained and technically tested by us - Ready for immediate use Visits and test runs are possible by arrangement.

Inv. Num. : 8737 Type: NX 100 Producer: MOTOMAN Created: 2008 Parameters: The workplace consists of the following components: 2 Yaskawa NC100 robots TPS5000 welding power sources Fronius air purifier 2x Single Column Positioner (Dekona 101) 1x double column and single axis positioner

SPECIFICATIONS: Installed power: 2.2 kW 02 Cotton bags: Ø 450 mm

König Brötchenanlage composed of: Dough dividing and rounding machine type REX Classic T6S Pre-proofer type ECO TWIN 800 with cutting station with Stüpfler (Kaiser) with lateral pretzel discharge Deduction - Bakery condition not cleaned - partially. in need of overhaul

SPECIFICATIONS: Installed power: 3 kW 02 Cotton bags: Ø 450 mm

Qty. 1 Second-hand PET – CSD bottle filling line Mfc.: H+E Maschinenbau, MTA SpA, ABM, Posimat, Sacmi Filling, Bertolaso, JAKU/JB Michiels, KRONES AG, SMI SpA, Robopac SpA Built: 1992 - 2023 Capacity: 6,000 bph Products: CSD - PET Neck finish: PCO 1881 Format available: 0.5 L

Kodak Achieve T400 Platesetter Age: 2022 Max. Plate size: 838 x 990 mm Min. Plate size: 267 x 215 mm Max. image area: 827.9 x 990 mm Speed: up to 28 plates/hour Resolution: 2500 dpi 830 nm platesetter Semi automatic plate loading and unloading Harleqin Multi RIP 13.0 Dongle

Manufacturer: ASYS / MODUS Model: TRM 01 + MODUS AOI Year of Manufacture: 2015 Type of Machine : ASYS conveyor with mounted AOI on the top. ASYS. Technical details ( ASYS) : Nominal Voltage: 230 / 115 VAC Frequency: 50 / 60 Hz Full Load Current: 0.6 / 1.2 A Working Voltage: 24 V DC Number of Phases: 1 Power: 0.13 kW Circuit Breakers: 0.5 / 3.15 / 10 A Pressure: 6 bar Flow: 5 Nl/min Technical details ( MODUS AOI) Voltage: 230V 50Hz Find more here - / Contact us at -

Manufacturer: ACA Model: AGN2D2 Year of Manufacture: 2020 Condition : Good Weight: 1500 kg Input Voltage: 240V / 50Hz Phase: Single Power: 1500W Full Load Current: 7A Short Circuit Current: 30mA Find more here - / Contact us at -

Coating line BTI- E- 400/10000 Chocolate coating line consist of - Completely in V2A - Engine manufacturer: SEW Eurodrive - Control: Omron/Schneider -Blower - Scheierkasten - Internal heating - Interior heating steel - Inlet belt approx. 1 meter - Base and full cover possible - Floor pan with thermo sensor - Floor pan double-walled hot water heated - In bottom pan Motion agitator - Floor pan can be manually extended for cleaning - Chocolate pump, pump head in V2A - Double-walled pipes, hot water heated - Detail wave OPTION: For real chocolate ( with cocoa butter ) Version with external temperature control machine for an extra charge Cooling Tunnel Model: BTI 400/6000 - Width of the conveyor belt in the cooling tunnel: 400 mm - Width of mesh tape in the enrober: 375mm - Speed of conveyor belt: 0 - 7 m/min - (Speed is adjustable) - Cooling compressor power: 3 HP  ...

Manufacturer: ASYS Model: BCO 01 Year of Manufacture: 2016 Nominal Voltage: 230 / 115 VAC Frequency: 50 / 60 Hz Full Load Current:0.35 / 0.7 A Working Voltage: 24 V DC Number of Phases: 1 Power: 0.07 kW Circuit Breakers: 3.15 A Find more here - / Contact us at -

Manufacturer: ASYS Model: BC0 02 Year of Manufacture: 2016 Nominal Voltage: 230/115 VAC Frequency: 50/60 Hz Full Load Current: 0.6/12 A Working Voltage: 24 V DC Number of Phases: 1 Power: 0.11 kW Circuit Breakers: 3.15 A Find more here - / Contact us at -

Fuchs extraction KKFD101F with silencer module and new filters ( activated carbon, HEPA , filter mat and filter bag ) without warranty; EXW, year of construction 11/99

KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (May 2022) with only 1296 laser hours 2400 dpi Z-Speed Panel counter: 258861 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from right to left with Prinergy TIFF Shooter Dell PowerEdge 7330 Plate development machine built in 206 Year of Make: 2006

KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (08/2022) with only 2615 laser hours 2400 dpi Z-Speed Panel counter: 395443 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from left to right with Prinergy TIFF Shooter Year of Make: 2016 New TH 7 laser (08/2022) with only 2615 laser hours

Rötchenanlage: Kövy KM-S Year of Make: 2012 Head Machine Fortuna: Primus Pro V11.0 Year of Make: 2021 Kövy Dimensions: approx. 4900 × 1080 × 2530 mm Capacity: approx. 5,280 dough pieces /h Proofer capacity: 860 dough pieces Fortuna Hourly output: max.ca. 5,000 dough pieces /h Weight range: 40 -100 gr. Weight: approx. 1,100 kg Length of band top: 1,200 mm Length with strap: 1,705 mm Width: 1,000 mm Height: 1,520 mm Year of construction Fortuna: 2021 Year of construction Kövy: 2012

Manufacturer: MatriX Model: X3 Year of Manufacture: 2015 Condition : Excellent Accessories input Feeder output feeder Find more here - / Contact us at -

Manufacturer: NanoFocus Model: Usprint 3D Inspection System with Bauman Year of Manufacture: 2014 Condition : Excellent Control Operation Voltage: 24 / 400 V Nominal Current: 17.3 A Electricity Type: 3-phase Frequency: 50 Hz Compressed Air: 6 bar Supply Line Fuse: 25 A (slow-blow), 16 A (fast-acting) Nominal Power: 4.6 kW CE Marked Find more here - / Contact us at -

Manufacturer: Orbotech Model: Ultra Discovery VM Year of Manufacture: 2011 Ultra Discovery VM delivers simple, intelligent, and powerful AOI performance with 10 µm line/space inspection capabilities for FC-BGA, PBGA, CSP, and COF production. Delivering super clear images essential for capturing the finest defects, the system achieves outstanding AOI results with minimal effort or training, even on complicated panels. Most of the manufacturer’s valuable time on the system is spent inspecting panels. Logic false calls are virtually eliminated and overall false calls are minimized, saving precious verification time. Benefits - High throughput and superior detection with a minimal number of false calls - Especially designed for inspection of the finest lines down to 10 µm - Quick setup even for the most complicated jobs for higher productivity - Automation ready - Very high uptime  ...

Pero Washing Machine 2600/016GR.2W-4667

Drum chipper / chipper / wood shredder Refurbished (Workshop Overhauled) Vecoplan Drum chipper type VTH-55/14/2 Factory overhauled (refurbished) with new bearing (spherical roller bearing), tested rotor and new drive motor Knives and counterknives new Feed width/height: 550 x 140 mm Rotor diameter: 500 mm Feed rollers: 2 pieces Screen perforation: 55 x 55 mm Drive power: 45.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,200 kg (approx. 4,000 kg incl. steel construction) Year of manufacture: 1981 / overhauled 2007 Machine colour: RAL 6011 Reseda green Cleavers and counter-knives, new incl. 6 pcs. cleavers, new incl. steel substructure H = 700 mm without electrical installation Drum chippers | Wood chippers | Hacker | Chopping Machine | Wood chipping machine | Shredders | Wood shredder # Vecoplan drum chipper type VTH-55/14/2 refurbished | reconditioned wi ...

FOBA Vario RPD50 VS1109/048 - Windows XP English / German - 1.4GHz 512MB RAM - Fobagraf 441-01 - EMC / IMP camera - New IMP LED's - Radiator type P313 - 2013 – new filters - HF 40W - PK used, year of construction 2011, 1.3MB, 10.5 W under the lens - 420 lens, deflection unit Raylase SS 10 - Z - 170mm and X axis 300mm - Turntables in pendulum mode, - Start via footswitch, possible via light curtain - Internal / FOBA PLC - Bulkhead = max. component height 150mm - Completely cleaned / serviced 19% VAT is shown, EXW, Commissioning, instruction, training possible on request

Manufacturer: MYCRONIC Model: MY600 Year of Manufacture: 2016 The MY600 represents the top of jet-printing technology, enabling precise and fast solder-paste deposition for demanding electronics manufacturing. The machine is ideal for modern production lines with high quality requirements. KEY FEATURES • Highest throughput: 50 percent higher than previous models • Over 1 million dots per hour • Stencil-free technology for precise application of solder paste on complex PCBs • Advanced motion system technology from Mycronic for SMT production lines Find more here - / Contact us at -

MAKRA Oil Mist Filtration System Technical features: Supply voltage: 400 [V] Weight: 30 [Kg] Air Flow: 2400 [m³/h] Frequency: 50 [Hz] Installed power: 0.37 [kW] Noise level: 67 [dB] Machine visible in our premises, by appointment. Possibility of shipping throughout France as well as internationally. More photos and details on request. Technical description for information purposes only, without obligation on our part.

Manufacturer:Prozap Type of Machine : EK0 Assembly line station Year of Manufacture: 2023 Power supply: TN-S Voltage: 400 V, 50 Hz Current: 40 A Power: 15 kW Pneumatic pressure: 4.5 bar Weight: 1600 kg Certifications: ISO 9001, CE Find more here - / Contact us at -

Manufacturer: Prozap Model: EK0 Bushing Assembly Year of Manufacture: 2023 Power supply: TN-S Voltage: 400 V, 50 Hz Current: 15 A Power: 8 kW Pneumatic pressure: 6 bar Hydraulic pressure: 255 bar Weight: 6000 kg Certifications: ISO 9001, CE Find more here - / Contact us at -

FROGERAIS dragee coating turbine, Engine: Type B F 80 b: 0.96 kW, Turbine diameter (mm): 900, Turbine depth (mm): 630, Dimensions (mm): 1530x1250 H2600

Offer 25468 Sheet metal – roll forming line for shelves Specifications: - Shelf width approx. 250 mm - Material thickness 1.25 mm - Roll forming unit with 16 roll stations - hydr. Punching unit - Straightening unit make DREHER -Mot. Reel CAMU Load capacity approx. 1.5 T -Control panel - Space requirement / footprint 14 x 1.5 m - Weight approx. 10 T

- Maximum panel format 2080 x 1600 mm, min. plate format 655 x 410 mm - 128 laser diodes, blue laser 405nm for UV light sensitive analog standard plates - Resolution 2,400 dpi - Optionally with automatic plate feeder PHS system with 5 cassettes at call Price from location on request

Key data: 48 KW, 60 kVA, 400 V

Execution: Category: Emergency Power Generator Stationary Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine type: F 6 L 912 Motor power: 56 KW Cooling: Air-cooled Starting: Electric 12 V DC Speed: 1500 rpm Fuel: Low sulphur fuel oil Emission standard: TA-Luft Technical data generator: Generator manufacturer: Stamford Generator Type: S1L2-Y Generator power: 60 kVA Generator current: 86.40 amps Short-circuit current: 259.2 amps Overload: 95.04 amps Voltage 400 / 231 Volt Voltage regulator: yes electronic AVR Power factor: cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery set up Base frame tank with drip pan Capacity / litre: 1 ...

Used bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In bakery condition- Compact bread roll line - Mini Rex Futura-S head machine - Can also be rotated to look only round and take off directly - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - With tools for emperors - Condition: good, everything checked - Machine is still being cleaned The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

Used Trane FVCP06CWQ5R2WWBVWW fancoil unit on Glycol. The unit can be used for cooling and heating. Dimensions: 1410x240x560 mm (LxWxH). The fancoil unit has a cooling capacity of 4,8 kW at the following temperatures - air inlet temperature: 26°C & water inlet/outlet temperature: +7°C/+12°C. Trane FVC units are often used in: Apartments / Residential buildings Hotel rooms Offices / small workplaces Bedrooms / living rooms

Manufacturer: MEK Model: I-spector 350 Year of Manufacture: 2019 Type of Machine : AOI System Complete with PC, dongle Find more here - / Contact us at -

Schick ENK 404-5.7 TK 404-1.3 Refrigeration Unit Schick Refrigeration Unit ENK 404-5.7 TK 404-1.3 Nominal voltage: 400 V Maximum operating current: 17 A 50 Hz Control voltage: 230 V Refrigerant R 404A Ab. Operating overpressure: 25 bar More items - new and used - can be found in our shop! International shipping costs on request!