137,066 used machines on RESALE, but how to find them? Machine Search
Hilger & Kern P80 Pump Basic version P80 Barrel size 80l Gear ratio (drive) 56:1 Flow rate (with 20 double lifts) l/min 0.61 Material Viscosity (ball valve pump/scoop piston pump) 2.5 million Working pressure (max.) bar 20-250 (315) Air consumption at 20 double strokes l/min 220 Dimensions base plate (A x W) mm 610 x 500 Height retracted mm 1400 Height extended mm 2200 Weight without container kg 65 / 72 Maximum container height mm 750 Maximum container size 80 Maximum container Ø outside mm 440 A single pump is included Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!
The Netzsch NL progressing cavity pump (also known as a mono or screw pump), engineered for the continuous and gentle transfer of challenging media. This pump operates on the well-proven progressing cavity principle, consisting of two primary components: a precision-machined helical rotor and a resilient elastomer stator. The rotor features a single-helix design with a large pitch, deep thread profile, and small core diameter. As the rotor rotates eccentrically within the stator, sealed cavities are formed that convey the product continuously and pulsation-free from inlet to outlet. This pump is previously used in a dairy factory. Motor: 1,1 kW - 220/240 - 380/415 V - 50 Hz - 1.410/1.700 rpm - 4,5/2,4 A. Connections on the inlet/outlet: DN 50. Estimated capacity (based on motor power, gear reduction unknown): +/- 1.000 ltr/h., Key Advantages:, - Valve-free design with stable, proportiona ...
- Manufacturer: Putzmeister - Machine Type: Rotor Concrete Pump - Presumed pump type: Putzmeister R 65 - Flow rate: up to approx. 40 m³/h - Max. delivery pressure: approx. 25 bar - Rotor delivery hose: approx. Ø 125 mm - Drive: electric - Motor power: approx. 45 kW - Voltage / frequency: 400 V / 50 Hz - Hydraulic tank: approx. 100 litres - During inspection, the hydraulic tank appeared to be about half full. - Before commissioning, a service including inspection or renewal of the hydraulic oil is recommended. - Operating hours: Approximately 750 operating hours are noted on a service/maintenance sticker from 2022. - The current operating hours are not known. Since 2022, further operating hours may have been added. - According to the seller, the machine was originally purchased for a project, but not used. - Accessories: The hoses recognizable in the pictures are part of ...
Set of 3 Industrial Centrifugal Pump / Slurry Pump Assembly with Gearbox. One is fully refurbished and ready for use; the other two are used, but will be dismantled and loaded free of charge. Auction-ID: A1-51282-157
Vacuum Glass Chamber Exikator Glass The glass cylinder and glass lid can be used to test reactions as well as the behaviour of a wide variety of liquids/substances/products under vacuum. Easy handling and operation Many connection possibilities volume of 13.9 liters Good and easy cleaning possibilities weight 14.5 KG Areas of application: Labore e.g. for reaction tests under vacuum production e.g. drying of components universities e.g. for preliminary research e.g. design of plastic vacuum glass chamber exiactor glass possible supply/variants: Development Various sizes of the glass vacuum chamber available A widerange of pumps available for vacuum generation heating plate vacuum flowthroughs adaptations vacuumdata for the glass chamber From safety glass seal made of Viton glass lid, it is easy to removable joint plastic inserts for a safe stand leakage rate less than 0.1 L/s external ...
Esta Eurosog W/H 80.299 Industrial vacuum cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine and free-flowing dusts. The AC version is designed for sporadic use during cleaning work in workshops. Its smooth-running rollers provide the industrial vacuum cleaner with a high degree of mobility. The spacious dust collection container has a capacity of 80 litres. Thanks to the patented tipping device, the dust can be disposed of effortlessly. Areas of application for EUROSOG industrial vacuum cleaners: AC version for sporadic use For dry, coarse and fine dusts For cleaning processing machines For general cleaning work (e.g. workshop floors) Can be used in many industries (e.g. wood and metal industry) Metal industry Construction industry Wood industry Chemical Printing industry Flocculation industry Cleaning industry Ha ...
Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle
Vacuum lifting device, vacuum lifterCustom-made as a handling device for an industrial robotYear of construction 2008Load capacity approx. 60 kgSuction foot spacing min. 120 x 150 mmSuction foot spacing max. 700 x 600 mm- 4 suction feet 100 mm- 4 vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces cross member, adjustable in width via servo drive from 150-600 mm- suction foot spacing via 2 servo drives adjustable from 120-700 mm- suction cup adjustment via 3 pieces of servo motors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very elaborate and
Vacuum lifting device, vacuum lifter FESTOSorld production as a handling device for an industrial robotYear of construction approx. 2008Load capacity approx. 50 kg- 7 pieces suction plate 32 mm (construction intended for 12 pieces)- 16 pieces suction plate 42 mm (construction intended for 20 pieces)- 5 pieces suction plate 60 mm (construction intended for 6 pieces)- a few suction feet are missing, see pictures- swivelling base body for suction surface in 90 angles or flat 180- base body pneumatically swivelling- Very elaborate and precise construction with
Debus DDS 118 / 5/ 23 Chips Industrial Vacuum Cleaner 6 bar 4.6 m³/min Original price 4604,- € Manufacturer: Debus Model No.: DDS 118 Full Name: DDS 118/5/23 Chips Year of Make: 2016 Fabr.-Nr.: 278 Operating pressure: 6 bar Suction power: 4.6 m³/min Air requirement: 1.3 m³/min Weight: approx. 30 kg Capacity: approx. 40 litres Dimensions: 55 cm long, 60 cm wide and 150 cm high Condition: used Scope of delivery: see pictures Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosts. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machines More items - new and used - can be found in our shop! International shipping costs on request!
Vacuum Vacuum Cleaner Manufacturer Nilfisk Type VHW 321 L Year of construction 2013
TEKNA Plasma Systems Enthalpy Probe Diagnostic System Manufacturer: TEKNA Plasma Systems Equipment type: Plasma Enthalpy Probe Diagnostic / Measurement System Location: 91701 Trnava Integrated plasma diagnostic system designed for measurement and characterization of thermal plasma processes. The system incorporates an enthalpy probe measurement arrangement together with mass-spectrometry and vacuum equipment for research, development and industrial plasma diagnostics. Included / identified equipment: TEKNA Plasma Systems enthalpy probe diagnostic equipment Pfeiffer Vacuum PrismaPlus mass spectrometer Vacuum pumping station Probe and measurement components Associated vacuum, electrical and control components Condition: Used. Complete integrated system as described; current operational condition, calibration status and measurement accuracy have not been verified. Offe ...
Industrial pneumatic vacuum lifting attachment fitted with two large rubber suction pads, intended for gripping and handling flat, non-porous materials such as stone slabs, sheet material, glass or similar workpieces. Type: Pneumatic vacuum lifting / handling device Vacuum pads: 2 large circular rubber suction pads Operation: Pneumatic Air connection: Quick-connect compressed-air coupling Pneumatic components: Festo components visible Controls: Manual pneumatic control valve and push-button controls Monitoring: 2 × Festo vacuum/pressure gauges with coloured operating ranges Lifting points: Multiple steel lifting eyes Handling: Integrated carrying handles Construction: Heavy-duty welded steel housing Auction-ID: A1-51282-159
Rietschle vacuum pump CLF 60V 60m3/h, 1400rpm, intake pressure 1 torr, 1.5 KW
used
BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL
Manufacturer: BUSCH Type: RC 0025 E501 Capacity: 25 m3/h Vacuum pump BUSCH type RC 0025 E501 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
ZRVL-300 M single-stage oil-lubricated rotary vane vacuum pump 3-phase, 7.5kW 300m3/h The vacuum pump purchased for a project and then not used is available unused/as good as new Overview technical data ZRVL Type: M300E - Pumping speed: 300 [m3/h] - Ultimate pressure: 0.1 [mbar abs] - Final pressure gas ballast 0.7 [mbar abs] - Voltage 50 Hz: 230/400 V - Motor 50 Hz: 7.5 kW - H2O compatibility: 5.7 kg/h - Oil volume: 6.5 l - Weight: 200 kg - Sound pressure level: 70 dB (A) Accessories/equipment for the ZRVL series: Inlet filter with filter cartridge made of polyester or stainless steel Oil level switch Inlet pressure gauge Oil temperature switches or transmitters Oil trace heating for outdoor installations with high steam loads (open-cast mining or construction site operation) Versions for oxygen applications Monitoring system for monitoring the conditi ...
Manufacturer: Vakuumturbine Siemens Ex geschützt, Type: 1MA5131-, Year: nB89-Z, Stromaufnahme A: 12,5, revolutions rpm: 2885, Drive power kW: 6,5, Dry-runner: yes, Year :nB89-Z
Manufacturer: Kaeser Vakuumstation, Type: BSV 100, Year: 2006, Saugvermögen m³/h: 1,0 bar, revolutions rpm: 3000, Operating hours: 76281, Revolutions of main rotor U/min: 3000, Year :2006
Used vacuum pump made by TEPRO Koszalin with a central vacuum. Unit that has two points of connection, the machine very little exploited.
Manufacturer: Becker, Type: SV.5,250/1, revolutions rpm: 2800, Final sealing pressure mbar: 190/200, Drive power kW: ca.3,
Manufacturer: Seitenkanalverdichter Siemens, Revolutions of main rotor U/min: 2920, Drive power kW: 5,5, Dry-runner: yes,
Manufacturer: Wiwa Leimpumpe, Type: 10018, Year: 90/630310, Volume flow m³/min: 10, Compressed air min/max bar: 8, Year :90/630310
The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE ...
Vacuum pump, 025-138, 20mbar, Busch, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. 36 kg, 550 x 270 x 270 mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian l ...
Vacuum pump, 025-138, 20mbar, Busch, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. 36 kg, 550 x 270 x 270 mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian l ...
Rotary vane vacuum & compressor - running dry Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Motor: 400V DS Suction power: 100 - 140m3/h Compression pressure/ vacuum: optional +-0.5bar / +-1.5 barStatus: Preliminary
Rotary vane vacuum compressor - running dry Manufacturer: Becker Type: KVT 3,100 Motor: 400V Status: Generalueberholt and repainted Performance: 12 months; ready for use
; ready for operation
Vacuum pump, rotary vane pump -Drive: 1.25 kW -Flow rate: 40 m³/h -Vacuum: 150 mbar -Dimensions: 530/320/H250 mm -Weight: 38 kg
Vacuum pump, rotary vane pump -Drive: 1.6 kW -Flow rate: m³/h -Max. pressure: mbar -Speed: 2850 rpm -Inlet: Ø 43 mm -Outlet: Ø 43 mm -Price: per piece -Quantity: 1 available -Dimensions: 360/220/H215 mm -Weight: 20 kg
Waelz piston vacuum pump Manufacturer: Edwards Type: EH4200 Voltage: 50Hz 400V Status: Generalueberholt Gewast: 12 months Including: engine re-storage, repainting, electric check ; ready for use
maximum number of results exceeded
please refine your search
15.000 € 
