129,270 used machines on RESALE, but how to find them? Machine Search
ZRVL-300 M single-stage oil-lubricated rotary vane vacuum pump 3-phase, 7.5kW 300m3/h The vacuum pump purchased for a project and then not used is available unused/as good as new Overview technical data ZRVL Type: M300E - Pumping speed: 300 [m3/h] - Ultimate pressure: 0.1 [mbar abs] - Final pressure gas ballast 0.7 [mbar abs] - Voltage 50 Hz: 230/400 V - Motor 50 Hz: 7.5 kW - H2O compatibility: 5.7 kg/h - Oil volume: 6.5 l - Weight: 200 kg - Sound pressure level: 70 dB (A) Accessories/equipment for the ZRVL series: Inlet filter with filter cartridge made of polyester or stainless steel Oil level switch Inlet pressure gauge Oil temperature switches or transmitters Oil trace heating for outdoor installations with high steam loads (open-cast mining or construction site operation) Versions for oxygen applications Monitoring system for monitoring the conditi ...
Type Cutters Warranty 12 months Height 2350 Width 2200 mm Length 1910 mm Weight 4000 kg Voltage Electrical: 400V 50Hz 3N Installed Power 57.25 kw Main material Stainlees Steel Time of realisation in stock Cutter Type Bowl Cutter Cutter made of Stainless steel Bowl made of Stainless steel Bowl capacity 200 l Efficiency 100-140 kg/cycle Knives amount 6 pc. Knife shaft revolutions 900/1800/3600 rpm Bowl revolutions 7.5/10/15 rpm
Vacumet High-Tech Waste Management System Demonstration machine as good as new Tank size: 142 litres Volume reduction: 50 - 70 % Body material: powder-coated steel Weight: 198 kg Degree of protection: IP 54 Connected loads: 230 V 50 Hz 1 kW Control: PLC Noise level: 60 db Tested / Safety: EN 60204 - VDE 0113 Dimensions: W: 920 x D: 750 x H: 780 mm kasu - vacumet is a modern machine for disinfecting the exhaust air and reducing waste. Vacuum and the introduction of an odour blocker neutralise unpleasant odours, trap bacteria and viruses and contain bacterial carry-over. Due to the subsequent sealing of the foil bags and flooding of the chamber with atmospheric pressure, a pressure of approx. 8,000 kg/m² acts on the PA/PE garbage bag, thus achieving an enormous volume reduction.
Handtmann VF 620 vacuum filling machine with linking gear box, filling, portioning, linking, monitor control, with loading device for 200 liter standard trollies. You are very welcome to test the machine in our facility in Koblenz, Germany.
Cole Parmer Vacuum Furnace Cole Parmer's vacuum furnaces are designed for drying under carefully controlled conditions – normal atmosphere, vacuum to 30" Hg or inert gas atmosphere. The oven enables drying, vacuum embedding, electroplating and processing of electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the furnace. All controls and connections (except the power supply) are located on the front in a vertical panel. Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm More items - new and used - can be found in our shop! International shipping costs on request!
used
K+G Wetter SM 65 T2M-R, 65 liters bowl cutter, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake, main switch as well as electric control cabinet integrated, membrane keyboard, 2 knife speeds 1.500 – 3.000 rounds per minute, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to test the machine in Koblenz, Germany.
TOC 900 kg vacuum lifter was built in 2021 in Poland by Przedsiębiorstwo HAK Sp. z o.o. The device, designed for lifting parts with a flat surface, is an irreplaceable tool in, among others, the handling of industrial machinery. An electricity-powered vacuum generator is located directly on its design, significantly reducing operating costs compared to pneumatically powered pumps. Furthermore, the OC-900 vacuum lifter is extremely versatile and can be mounted on the hook of any lifting device. Technical specifications of the TOC 900 kg vacuum lifter - maximum lifting capacity: 900 kg - maximum lifting area (L x W): 7000 x 2000 mm - minimum lifting area (L x W): 1000 x 500 mm - suction cup diameter: 250 mm - suction cup number: 10 - main beam length: 6000 mm - main beam cross-section: 80×80 mm - crossbeam length: 1200 mm - crossbeam cross-section: 40×40 mm - handle length: ...
The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE ...
K+G Wetter SM 90 STL bowl cutter, 90 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife speed up to 5,000 rpm., 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse (40-500 UpM), temperature switch off function, knife head with 6 knives, power 32 kW. You are very welcome to test the machine in our facility in Koblenz, Germany.
Ekato Unimix Vacuum Processing System SRT 50 Order# 4808/2, Series# 70888. Year of manufacture 2004 Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete document ...
Rühle Miknetum MGR 1500, newest generation of Tumbler, year of construction 2008, with vacuum, mixing arm, container size 1500 liters, filling size 900 Liters, intelligent Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, feed spindle as loading device, comfortable emptying of the goods by standard carriage size. You are very welcome to see the machine at our facility in 56070 Koblenz, Germany.
K+G Wetter vacuum Cutmix 120 STL, model VCM 120 ,120 liters vacuum cutter, variable knife sdpeed, 2 bowl speeds, mixing speed forward and reverse, variable bowl speed, unloader manually operated, hydrlauic unloading device, knife cover electrically operated, with cooking facility. Further Information on demand. You are very welcome to test the machine in our facility in Koblenz, Germany.
5x vacuum tube lifter with column slewing crane 4m boom, 4m high, 80kg load capacity - used - : Price per piece, from location: 12.500.-€ (net), dismantled, packed and loaded! Manufacturer: Timmer Type: S5/SON Type: lightLIFT 50 kg Art.Nr.: S5-4000/SÄ4000/43-80SO Year of construction: 2023, rarely used Short description of the application Handling of cardboard boxes with a maximum of 40kg For Spax cardboard boxes Tube lifter lightLIFT 50 kg UST-LL-HE-140/50-2,5-FH lightLIFT lifting unit with fixed handle Handle length: 300 mm Lifting capacity: 50 kg Lifting hose: 140 mm Lifting hose length: 2,500 mm Electrical vacuum blower module medium inkt. Motor protection switches, engine protection and vibration dampers Weight: approx. 54 kg Vacuum Suction Hose Material: PVC Ø: 38 mm, length 15 m Colour: black for vacuum generators: SMALL, MEDIUM, LARGE and vacuum pu ...
Handtmann VF 80/160 vacuum filling machine with loading device, linking device 34-4, vacuum stuffer machine for filling, portioning, linking, mc control, microcomputer control, filling capacity 3.000 kg/h, pressure up to 35 bar, portioning range 5-100,000 g, hopper volume 90/160 liters. You are very welcome to test the machine in our facility in Koblenz, Germany.
Exhibition machine MOVE - the high-precision vacuum press with a gigantic usable surface for vacuum form gluing and vacuum veneering of bent workpieces. With total flexibility, due to total mobility and revolutionary folding mechanism, to reduce the footprint to 45% when folded. High-precision vacuum press with flap opening incl. ⦁ Revolutionary folding mechanism (reduction of the footprint to 45%) ⦁ 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) optional, automatic shutdown when pressure is reached (with large vacuum volume) ⦁ Pressure regulation 400 to 900 mbar, analog vacuum pressure display ⦁ Highly elastic natural rubber membrane (up to +130 °C) ⦁ Diaphragm quick-change system ⦁ Stable phenolic resin worktop (up to +160 °C) ⦁ Gas pressure damper for flap opening ⦁ Vacuum pressure display ⦁ Connection for external vacuum bag ⦁ Smo ...
Ruhle Miknetum MGR 900, newest generation of Tumbler, with vacuum, mixing arm, container size 900 liters, filling size 675 Liters, intelligent touch-PC control, direct cooling by strong cooling unit, mixing and kneading , up to 25 rounds per minute, all stainless steel, loading device, comfortable emptying of the goods by standard carriage size You are very welcome to test the machine in our facility in Koblenz, Germany.
Vacuum pump, 025-138, 20mbar, Busch, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. 36 kg, 550 x 270 x 270 mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian l ...
Handtmann VF 608, vacuum filling machine for filling, portioning, linking, with servo drive, compact monitor control, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g., with linking device You are very welcome to test the machine in our facility in Koblenz, Germany
Vacuum pump, 025-138, 20mbar, Busch, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. 36 kg, 550 x 270 x 270 mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian l ...
The Lutetia Type 1 sous vide churn is aimed at food professionals who require high marinade quality and production performance. Indeed, this model can process up to 400 kg of meat and brine per cycle, making it a perfect solution for medium-sized workshops. In addition, the 950 liter tank volume ensures a comfortable margin for vacuum marinating operations, while ensuring repeatability of results and consistency of processing. Thanks to its compact design (2150 × 1230 × 1730 mm) and a weight of approx. 800 kg, this churn easily fits into an existing production line. In addition, vacuum technology improves brine absorption, enhancing the texture, taste and added value of the finished product. For example, the internal components and robust workmanship ensure a longer service life, while the quick integration and simplified maintenance reduce production downtime. In addition, the L ...
Vemag Robot 500 vacuum filling machine / dough portioner, double screw System, for filling, portioning, linking, microcomputer control, filling capacity up to 2,500 kg/h You are very welcome to test the machine in our facility in Koblenz, Germany.
The Lutetia T2 churn is a benchmark machine in the field of vacuum mixing. Designed to meet the needs of meat and food processing plants, it offers a capacity perfectly suited to medium-sized productions. This ensures an ideal balance between performance and space. Thanks to its homogeneous mixing system, the T2 Churn optimizes marination and improves the texture of the products. This is because the vacuum process promotes uniform brine penetration and reduces yield losses. In addition, it preserves the quality of the meat by limiting oxidation and improving preservation. This efficiency makes it an essential tool for manufacturers wishing to produce with regularity and consistency. In addition, its robustness and stainless steel design ensure optimal durability. Food contact surfaces meet the highest hygiene standards, simplifying cleaning and maintenance. In addition, its footpri ...
Kilia vacuum bowl cutter, 200 liters bowl cutter, bowl and bowl-cover stainless steel, hydraulic noise reduction cover, knife shaft brake electrically operated, membrane keyboard, variable knife speed, knife head, hydraulic loading device, hydraulic unloader
Waelz piston vacuum pump Manufacturer: Edwards Type: EH4200 Voltage: 50Hz 400V Status: Generalueberholt Gewast: 12 months Including: engine re-storage, repainting, electric check ; ready for use
The Lutetia T4 vacuum churn is an essential tool for meat processing companies looking to optimize the quality and efficiency of their processes. Thanks to its high-performance vacuum system, this churn ensures homogeneous absorption of liquids, which improves the texture and flavor of the finished products. In fact, it allows you to marinate large quantities of meat efficiently, guaranteeing consistent and high-quality results. In addition, the Lutetia Type 4 Churn stands out for its robustness and ability to meet the demands of intensive production environments. With a high mixing capacity, it is perfectly suited for large productions, while ensuring a smooth and fast work process. In addition, it can be easily integrated into different production lines, offering great flexibility in terms of managing the volumes and types of meat processed. In short, the Lutetia Type 4 Churn is ...
used
used Handtmann VF 630 vacuum filling machine for filling, portioning, linking, year of construction 2008, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 10.200 kg/h, pressure up to 40 bar, up to 700 port./min., portioning range from 5-100,000 gram
Helium leak detector Manufacturer: Leybold Type: UL 100 Condition: Tested and ready exhausted: Oil-lubred pump Connection: 230V Delivery time: 1 where. (u.ue.V.); Ready
The Lutetia Type 5 vacuum churn is a must-have tool for food industry professionals looking to improve the quality and efficiency of their processing processes. Designed for processing large quantities of meat, this churn optimizes marinating and seasoning with its vacuum operation, ensuring even absorption of liquids and spices. This machine is equipped with a timer with variable speed drive, which allows each cycle to be customized according to specific production needs. As a result, it delivers consistent results while optimizing processing time. Thanks to its large capacity of 3800 to 4000 kg of meat and brine, the Lutetia T5 is particularly suitable for intensive production environments. Its robust, stainless steel design ensures exceptional durability and maximum hygiene, essential in food processing processes. In addition, its variable speed control allows precise control of th ...
Rotary vane vacuum pump oel circulation lubricated Manufacturer: Pfeiffer Type: UN 1001 SW Number: PK D00 131 Status: Used (On request, a general ization is possible) suction digesters: approx. 1000 m3/h final pressure: Small 20 mbar (98% vacuum) cleaner: mineraloil Cooling: water cooling Delivery time: ex stock; ready for use
The Pannkoke 7011 CeDe is a vacuum lifting system for glass and similar materials. It is designed for the safe and flexible internal transport of heavy sheets. Below you will find the key specifications. ⚙️Main technical data Type: Vacuum lifter Year of construction : 2001 Serial number : 2001/ 2184 01 Vacuum circuit: o 1-circuit system with vacuum tank, check valve, vacuum switch and vacuum gauge o Closed circuit prevents vacuum loss in the event of a power failure o Acoustic signal when there is insufficient vacuum o Vacuum generation: o Built-in low-maintenance vacuum pump (dry running) Battery-powered, with quick-change system (battery change < 1 minute) o Charger for second battery (110–230 V, 50/60 Hz, 1 phase) o Operation: o On/off directly on the device o Suction/release via remote control o Suspension: 2-fold crane suspension, rotatab ...
Lock valve vacuum pump Status: used, tested, functional Manufacturer: Kinney Type: KT-300 D Engine: 400V equipment: mineraloil nominal suction digesters: 25 m3/h End pressure: <0.008 mbar (abs.) Including: user manual o elfilling (
Screw vacuum pump Running Status: As good as new Performance: 12 months Zubehoer: User manual delivery time: ex stock; ready for use
Vacuum packer VAMA VacBox Technical data: Type: VB 370/H Year of Make: 2017 230 Volt / 50 Hz / 10 A / 1.8 kW Weight: 50 kg Chamber size: 370 x 400 x 160 mm Sealing bar length: 350 mm Max. bag size: 350 x 420 mm Machine design Completely stainless steel Compact, solid design Surface ground Corrugated acrylic glass lid 3 insertion plates for different height levels in the chamber High-performance pump with 16 m³ capacity Easy to use Vacuum adjustable Welding time adjustable Stock machine, immediately available! No cheap imported goods from China! Made in Germany! RRP: EUR 2,995 Function checked, condition see original pictures.
Rotary vane vacuum pump oellubized Manufacturer: Busch Type: RA 0063F Including: oel filling Status: Advance performance Performance: 12 months Delivery time: by arrangement; ready for use
Screw Vacuum Pump - Unused Manufacturer: Alcatel / Adixen Type: A 300 P Motor: 380-460V Status: Used; As Performance: 12 months Suction power: 320 m3/h connection: ISO-K 63 final pressure: approx. 1.2x10-2 mbar (abs.) Including: user manual ; ready for use
KOLZER DGK 36SV vacuum metallizer was built in 2016 in Italy by Kolzer s.r.l. The machine on offer enables various types of components, i.e. plastics, glass, cups and automotive parts, to be coated with decorative or functional coatings. These coatings give the workpieces a characteristic metallic, mirror or gold effect. The machining process is performed in a deep vacuum. Inside a large chamber, there is a tungsten spiral into which small rods or wires of conductive metals are inserted. A high-power current is passed through the spiral, causing it to heat up to 1500°C. This temperature causes the material to melt and generate vapour. The vapour then spreads out as a cloud of atoms and is evenly deposited on cold objects (cups, foils, packaging), forming a thin metallic layer. The entire cycle takes between 4 and 6 minutes. The thermal evaporation method used in the PVD (Physical ...
Rotary vane vacuum pump oel circulation lubricated Manufacturer: Busch Type: RC 1000 B Status: Generalueberholt Performance: 12 months Suction plugs: approx. 1000m3/h Final pressure: approx. 20 mbar
Unimix SRC1600 vacuum processing vessel (vessel -1/2bar, 133C, total capacity 2145Ltr, working capacity 1600Ltr; jacket 4bar, 151c, 130Ltr., dished bottom, hydraulic lift to open the top, with EKATO S-Jet Homogeniser SJ 1000 SO EX in the bottom of the tank (380 V, 18kw, 3000rpm, new 2009), anchor stirrer/scraper (new 2022) with ATEX PTB motor on the top ( 380´V, 13,5kw), , vacuum pump Elmo Rietschle L300 2BV5111 incorporated inside main body, working pressure -1/+3bar, reactor outer sizes 1950x2300x2900 heigh (including motor), mounted on frame (floor size 2200x3300, frame height 300mm) ,material stainless steel, new operation software 2022, reactor is still in use for cosmetics production, Year of construction of main vessel 1992, all reconditioning data available. At a reduced price compared to new. Ready for shipping in 30 days after transaction agreed. You are welcome to inspect the ...
Balzers BAK 1050 evaporation chamber as seen in the photos. For technical questions, I would like to ask.
maximum number of results exceeded
please refine your search
37 € 
