We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,913 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
(1) Gas (2) Fuel (3) Electric: 0 Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Max. temperature: 1000 °C Execution: hardening Working space: Width: 100 mm Height: 140 mm depth: 300 mm External dimensions: Length: 1000 mm Width: 850 mm Height: 1400 mm
used
(1) Gas (2) Fuel (3) Electric: 0 Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Max. temperature: 1000 °C Execution: hardening Working space: Width: 100 mm Height: 140 mm depth: 300 mm External dimensions: Length: 1000 mm Width: 850 mm Height: 1400 mm
new
El. heated chamber furnace, make VEI type: VEI_KO_EB max. temperature: 450°C connected load: 28 kVA air flow: horizontal usable dimensions (w x h x d): 600 x 500 x 2000 mm
used
DBK David + Baader GMBH Industrial Furnace Electrically heated convection oven Type ITHU 150° Type ITHU Identification number 871126 Year of construction 2006 Usable space/furnace 8,393 m3 Steam room/furnace 11.5 m3 Weight 3000kg Rated voltage 400/230V 50Hz Power supply 21KVA Heating capacity 18 KW Rated current 30 A Pre-fuse 50 A Protection class IP 43 Highest drying temperature 120° exhaust air volume flow/furnace 95 m3/h
used
Pizza open Middleby Marshall
used
DBK David + Baader GMBH Industrial Furnace Electrically heated Convection oven Type ITVU 200° TYPE ITVU Identification number 870233 Year of construction 2006 Usable space 2.8 m3 Steam room 3.9 m3 Weight 850 kg Temperature 200° Rated voltage 400/230V 50Hz Power supply 21 kVA Heating capacity 18 kW Rated current 31A Pre-fuse 50 A Protection class IP 43 Exhaust air volume flow 230 m3/h
used
Control: P 2000 Technical data Max. temperature: 250 °C Execution: drying Working space: Width: 600 mm Height: 400 mm depth: 600 mm Power of the heating: 18 kW Ampere: 25 A Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 250 kg External dimensions: Length: 800 mm Width: 800 mm Height: 1500 mm Various accessories: Ventilating / pulsated air
used
Technical data Max. temperature: 500 °C
used
Technical data Max. temperature: 950 °C Working space: Width: 100 mm Height: 100 mm depth: 300 mm Total installed power: 3 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 150 kg External dimensions: Length: 1000 mm Width: 700 mm Height: 1100 mm Various accessories: Protective furnace gas device
used
Tunnel Type Annealing Furnace Mioba Mfg: Mioba Year of Mfg. 2008 Temperature 450 – 950 C Fuel: Natural Gas 15 Zones with a total of 144 Burners Plate thickness 3-120 mm Plate width 700 – 3.800 mm Plate length 16.500 mm Max Plate with thickness of 40 mm: 3200 x 12.000 mm Max Plate with thickness of 8 mm: 2500 x 10.000 mm Special roll load 2.260 kg/M 7 Conveyor Roll Sections; total 177 centrifugal casted rolls Speed 0,25 – 25 M/Min. Furnace Length 80 Meter; inside width 3900 mm
used
It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm Forge from 60 to 400 Ton Forging and Annealing Furnace
used
It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm
used
Rehm Thermal Systems Nitrogen-control Reflow Oven Nitrogen Melting Furnace Type: V8.1 Nitro 3.2 B Year of construction: 07/2008 Voltage: 3 x 400 V 50 Hz Power: 76 kW Cooling: 20l/min.; 2 bar min Nitrogen: 20m³/h Exhaust air: 400m³/h Dimensions: approx. 6000 mm x 1500 mm x 1700 mm Functional: not tested Condition: used The technical data can be found in the type plate. The offer includes only the parts shown in the photos. If you have any questions, inquiries or the like, please send us an e-mail.
used
Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.
used
Stone slab furnace GOSTOL Very suitable for pizza Type: PGP Working width: 2000 mm Baking chamber length: 6000 mm Baking area: 12 m² Working height: 850 mm temperature: 400°C Baking time: 2 - 12 min heat performance: 400 kW Furnace transport: granite slab tape Electr. Power: 9,7kW (oven) + 1,1kW (burner) Connection: 400V; 50Hz; 3Ph Dimensions: L= 8750 ; B= 3500; H= 3200 mm It is suitable as a pre-oven for bread or especially for PIZZA, MUFFIN, CUPCAKE etc. Inspection, dismantling & assembly as well as transport on request
used
Gebr. Vimek mesh belt oven, 6 m long, 2 baking chambers, with riello gas burner (320 kW), baking temperature 500° C, stainless steel strip, wire thickness 5 mm, external dimensions: 1640 mm wide, 6000 mm long, 2000 mm high
used
Glasbeek Finish Gas Chamber Oven G.11.01 200°C 54kW Glasbeek Finish Gas chamber furnace Maximum temperature 200°C Electrical connection 4 kW 54 KW 3x380V Approximate internal dimensions (W1900mm x D3000mm x H1880mm)
used
Glasbeek Finish Gas Chamber Furnace Type G.11.01 Glasbeek Finish Gas chamber furnace Type G.11.01 With loading trolleys Maximum temperature 200 ° C Year. 1991 3 x 380 V 54 kW Approximate internal dimensions (W1900mm x D2940mm x H1965mm)
used
Chamber furnace Manufacturer: Nabertherm Model: N161 Year of construction: 2000 temperature 1200 C kW: 30 A: 43.4 Hz: 50 V: 400 N: 3 Combustion chamber dimensions: approx. 54 x 40 x 85 cm Overall size oven: approx. 120 x 170 x 200 cm Weight approx. 950 kg verm. 6,955 operating hours Control: Controller C 40 An instruction manual is available for the control
used
Walking beam-forging furnace, make Ruppmann max. temperature: 1.250°C useable dimensions (l x w x h): 3.400 x 1350 x 120 mm throughput: 1 ton/h heating: natural gas Heating thru 4 hot air radiant ceiling Bloom burners, with flame monitoring by Kromschröder burners. Temperature measurement by thermocouples, as well as automatic and stepless temperature control. Heat exchanger, combustion air fan.
used
Key data: 1280
Vertical tempering furnace Electric 1280°C Nabertherm N5000/S Used high chamber furnace, overhaul possible on request - Tmax 1280°C - Capacity 5000 liters - External dimensions w x d x h 1600 x 2200 x 4000 mm - Net weight 7000 kg - Rated power 198 KW - Documentation Viewing possible by appointment at any time.
new
El. heated chamber furnace, make VEI type: VEI_KO_EB recirculation: horizontal airflow max. furnace temperature : 650°C internal dimensions (w x h x t): 800 x 800 x 1000 mm heating power: 51 kW fan power: 5,5 kW connected load: 61 kVA
used
1) a forging table or curing furnace or also called forging furnace of Flamefast type DS330 Ceramic Chip Forge, with hood and suction 2) a quenching bath or cleaning bath or also called hardening bath, type WO 200. Both hardly used. NP both together at about 6000€, Singles: 1100 and 1450
used
The oven is modular and has 3 burners (3 separate baking zones) and can be operated with either a steel belt or a net belt. Control cabinet: New Number of burners: 3 (NEW) Delivery time: 4 weeks Total length: 31,000 mm Total width: 2000 mm Working width: 1,000 mm Baking area: 26 m²
used
Fully automatic hardening line consists of: 1x hardening furnace with salt bath LLF-8/G/X-S (gas-heated) 2x tempering furnace FVF-8/E/X-R (electrical heated) 1x tempering furnace FVF-8-G/X (gas-heated) 1x washing machine WCF-8/X/3/E-R (electrical heated) 1x fine filter for wasing machine 1x desalination plant DS-80/E for washing machine 1x salt transfer container (salt storage for hardening furnace) 1x magazine with loader and unloader 1x transport roller conveyor 2x lift table (charge and discharge) 1x extractor hood over the entire length of the driveway 1x cooling place
used
(1) Gas (2) Fuel (3) Electric: 2 Temperature maximum: 1050 C° Capacity (kg): 5000 kg Connection 3 x 250 Amp Power 200 KW Driven loading cart with 5000 Kg capacity Temperatur 50 - 1050 Gr Celsius Heater heatmasters 2 chanells with 12 elements (AF3.25 wire) Control HM-1000 Controller HM-Rigel Version 2.2b (T) Insulation ceramic wood / fibre 200 mm For Stress relieving, annealing, normalizing, heat treament Length:3650mm Width:2545mm Height:4500mm Weight:4400kg INDUSTRIAL FURNACES ;Furnaces are used in many industries to produce a wide range of products under demanding requirements. this extensive design and manufacturing capability in thermal processing equipment is the solution for your high temperature furnace requirements. with wide assortment of furnaces, including Continuous, Batch, Car Bottom, Solution Heat Treat and Atmosphere. & ...
used
Drive gear to mains belt furnace NBO Winkler from spare parts warehouse unused
used
General: Year of construction 1985 Nominal temperature 350° C Power 6 kW
used
max. temperature: 300 Grad size of opening: . mm depth of chamber: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 1200x750x1620 m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 5636 Type: LPB-7320 Producer: Tema Generated: 2001 Parameters: Service system: PLC Maximum glass size: 1 7 x 3 0 m Compressed air consumption: 150l/min Space in the oven: 500 mm Rated current: 21 kW Power supply: 380 V/60
used
- Temperature range: in helium 2275 ° C - Combustion chamber diameter x height: 114 x 153 mm - Total power: 20 kW - Dimensions (W x D x H): 1.55 x 0.65 x 1.9 m - Machine weight: 640 kg - Condition: very good Details High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes
used
Manufacturer: Heraeus Type: TUo Year of construction: 1967 Power: 5.5 kW Temperature: 250 °C Dimensions: 600 x 600 x 550 mm
used
We offer the EFU 60/60 air circulation furnace of the Heraeus brand. Application temperature 500 °C, usable dimensions: 600x600x600.
used
We offer 42 heat-resistant V2A charging racks including grids for hardening furnaces.
used
We offer two chamber furnaces of type 1 G1101 from Glasbeek Finish BV. Burner: 2. Heating medium: natural gas. Heating capacity: 200kW to 450°C. Footprint: 3400x2400.
used
Induction Tilting Italimpianti FIM5 (FIM7 T CPU) and CPL / 5 in a very good working condition. Unit Specifications: - Power 7kva - 6.3kw. - Tilting Crucible with easy replacement. - Capacity approx. 5kg Gold. - Ability to melt gold, silver, copper, brass and alloys. - Graphite or Silicon Carbide crucible. - Manual tilting. - Maximum temperature 1350 degrees Celsius. - Metal stirring for proper sampling. - Flame in propane bottle to prevent oxidation in the metal. The price includes the Italimpianti specially adapted moulds which fit directly to the tilting unit in very good condition."
used
Hardening furnace, muffle furnace, nitriding furnace, microwave muffle furnace, incineration furnace, microwave high-speed incinerator, laboratory furnace -Melting and melt digestions z. B. for elemental analysis -Drying, annealing and heat treatments -Max. Heat: 1200 ? C -Microwave -Menu control Interfaces -Dimensions interior: 250/110 / H80 mm -Transport dimensions: 600/460 / H490 mm -Weight: 50 kg
new
Dear interested party, PLEASE READ THE FOLLOWING TEXT CAREFULLY. Yes, it's a lot, but it's important and usually answers all the questions ;) A new industrial continuous furnace from the manufacturer G.Maier from 2022 is offered, the continuous furnace is still originally packaged for shipping. The exact technical data can be found in the pictures, further technical data and information are available on request. The new price at that time was around 240,000 euros NO EXCHANGE OR RESERVATION. The items offered here are in used condition. The articles are without guarantee, warranty and liability for material defects and are handed in as they "stand and lie". Everything we know about the item is listed in our offers. We do not have any further pictures or information. ...
used
-the baking surface: widht is 210cm height is 22cm length is 2100cm, -oven ext. dimension aprox is 300 x 2100 cm - PLC controler - stanless steel plating -steam device -dismantled
used
Cieffe FNCm 2.5/0.8/1500 Hardening furnace Chamber furnace 1120 °C Manafacture: Cieffe Type: FNCm 2.5/0.8/1500 Max temperature: 1120 °C Series: 4185/1B Rated Current: 70A 37 kVA 400 volts Year: 2000 More items - new and used - can be found in our shop! International shipping costs on request!
used
Bejbl convection oven 12kW convection fan 900 m³/h The furnace was designed for heating/heating components Year of construction 2016, S/N 2422; with convection fan Haprovent-M S DV 300 (900 m³/h, 1,650 Pa) Motor (230/400 V, 0.5 kW, 1,435 rpm) Air heater LE-R 112 (400 V, 12 kW) More items - new and used - can be found in our shop! International shipping costs on request!
used
Heuft boiler Type: KO 160 186kW Overhauled 2013 For thermal oil, furnaces and equipment with control box with separate control large Elco burner Height: 150cm Width: 130cm Depth: 150cm
used
Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device
used
salt bath hardening system, make: IOB almost unused with charging dimensions 800 Ø x 1200 mm heating type: gas/electric consisting of: 2 loading places 3 electrical heated pre-reheating furnaces 500°C 4 gas heated crucible furnaces 900°C 1 electrical heated thermal bath 450°C 1 electrical heated washing tank (3-fold) 1 air cooling tank 1 water drainer 2 unloading places 1 el. measuring, regulating and control system 1 evaporator 1 intermediate storage tank 1 suction 1 chimney various accessories condition good requird space: approx. 12 x 20 m
used
Inv. Num. : 6500 Type: HT Producer: BMW Created: 2015 Parameters: Maximum temperature: 850 C Internal dimensions of the machine (LxWxH): 1650x1500x1900 mm Capacity: 2000 kg Nominal current: 250 A Control voltage: 3 PEN 50Hz 230V/TN C-S 24 V DC
used
ELNIK Lab furnace MIM3001L-T-50-CF-AB 630,843,011 220,795,054 -AC-AP-DP-STC12-CE-14 year 2022
used
Inv. Num. : 7184 Type: IKP0918 Producer: VULCAN Generated:- Parameters: Max. product width: 920 mm Max. product height: 1850 mm Power consumption: 104 kW
used
Inv. Num. : 7214 Type: WESTOMAT 900 S Producer: Striko Westofen Created: 2009 Parameters: Maximum temperature: 950 C Capacity: 700 kg Control voltage: 0.4 bar Machine dimensions: 1940 x 2735 x 2840 mm
used
K240/12 nabertherm . Foundry machines Nabertherm Kippofen 600kg Aluminium Nabertherm Kippofen 600kg Aluminium Balzer Kippofen 600kg Aluminium Balzer Schöpfofen 300kg Aluminium Fulmina Wannenkippofen 20 to Zamak/Zink Reißaus Durchlaufmischer 4-8 to Furansand AXA Fräsmaschine 2300x1190x600 Silo Ø 2500x5000 Sand
used
Walking beam-forging furnace, make Ruppmann max. temperature: 1.250°C useable dimensions (l x w x h): 3.400 x 1350 x 120 mm throughput: 1 ton/h heating: natural gas Heating thru 4 hot air radiant ceiling Bloom burners, with flame monitoring by Kromschröder burners. Temperature measurement by thermocouples, as well as automatic and stepless temperature control. Heat exchanger, combustion air fan.