va used for sale

Adresseriermaschine - Addressing Machines VARIADRESS - CMC KR 2 II - 01 Year 1992 - Serial-No. CMC KR 2 II -01

Collator 20 stations, format: A/3, Stiching Unit SPF-10II Sticher & Folder, Fronttrimmer FC-10II Trimmer, M-No.64025, 40.000 Exp./hr.

Bin lifter Type Lifting equipment Height 1900 Width 1500 mm Length 1800 mm Main material Stainlees Steel Time of realisation 2-3 weeks

S. No.: 011001 Equipment / Additional information: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Limitation: The minimum length from the center to top or bottom is 74 mm Finished Book Size: Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Top and bottom: Max. 80 mm / Min. 1 mm Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg or less Height of Entrance Section Pusher: 56 mm Clamp  ...

Vacuum dough divider, German Technik Capacity: 1.800-2.400 pcs/h. Dimensions: 1370/1780x650x1600mm Weight: 420kg Electrical power: 1.75kW

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

Flowmeter for direct measurement of mass flow rate, product density and temperatre of e.g. highly viscous fluids, gases or solids.

PE flat bottom container for outdoor installation - sulfuric acid

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning dia. in gap: 515 mm spindle bore: 38 mm spindle turning speed range: 30 - 2200 U/min feeds - longitudinal: 0,067 - 1,485 mm/U feeds - cross: 0,033 - 0,742 mm/U voltage: 400 V / 50 Hz total power requirement: 2,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm turning dia. in gap: 690 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 30 - 2000 U/min feeds - longitudinal: 0,031 - 1,7 mm/U thread - mm pitch: 0,1 - 14 mm thread - inch: 2 - 112 Gang / inch. tailstock quill diameter: 60 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 235 mm turning length: 1000 mm turning dia. in gap: 560 mm spindle bore: 52 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 18 - 2120 U/min feeds - longitudinal: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 thread - mm pitch: 0.25 - 7,5 mm thread - inch: 4 - 120 Gang / inch. tailstock quill diameter: 50 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 7,5 kW weight of the machine ca.: 1,85 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Protection level: 9 - 13 M Power supply: 3 Volt weight: 2 kg dimensions: 300 x 240 x 240 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: unbek. mm y-travel: unbek. mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

various blow molds available from stock. More information on request

Heating elements used in Kisters ZVT and ZEVA shrinktunnels. Various quantities and lengths (600, 700 and 1000 mm) and types (straight, bent, with and without wires) available: 240, 290 and 347 Volts, 2150, 3100 and 3500 Watts.

Filler block, Fabr. Nagema, Type: Varifill 40/10K/10PP Capacity: 12,000 Fl/h, run on 0.33 lt longneck and 0.5 lt NRW bottles 40 filling valves 10-digit crown cork 10-digit screw capper (for MCA 28 closures), double pre-evacuation, Running direction: left -> right YOC 1994 L: 4,000 mm, W: 2,700 mm, H: 2,800 mm Price on request

screw ø:: 90 mm screw length:: 20D screw speedl:: 0 - 60 U/min Condition: NEW, Specification: Rubber vacuum extruder - with warranty - Screw diameter: 90 mm - Screw length: L = 20 D (approx. 1,800 mm conveying length) - Screw speed: 0 - 60 rpm - Centre height of extruder: approx. 1,125 mm incl. base frame - Max. permissible injection pressure: 500 bar - with feed roller - Extruder water-tempered - Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump - Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm - Vacuum cylinder: three tempering zones BL = 1,057 mm - End cylinder: one temperature control zone approx. 4D = 360 mm - Number of tempering zones: 5 - Heating capaci ...

Product-specific. Various in stock. Enquire for details.

Laska Mixer ME 250 VAC Capacity 180 Kg Mixing System Z Arm Kneader Mixer

; Gross weight [kg]: 2; Accessories: - Mounting bracket (110x80x240 LxWxH in mm), - 3-way valve with 3/4 NPT connections, - 3x fuel supply hose connections for 8, 10 or 13mm internal hose diameter, - 3x fuel return hose connections for 8, 10 or 13mm internal hose diameter, - Fuel supply and

Reference ID: PP-61054 Category: Manufacturer: Windmöller & Hölscher Model: VAREX 70/90/70, 30D, AB2600 Year: 1995 Max. Size: 2600 mm Min. Size: 1500 mm Condition: Good Location: Europe Availability: Immediately Description WINDMÖLLER & HÖLSCHER VAREX 70/90/70 30D AB2600 – THREE-EXTRUDER BLOWN-FILM COEXTRUSION LINE IDENTIFICATION AND EXTRUSION Manufacturer: Windmöller & Hölscher Model: VAREX 70/90/70 30D AB2600 Process: Blown-film coextrusion Year of manufacture: 1995 Number of extruders: 3 Screw diameters: 70 / 90 / 70 mm L/D ratio: 30D Die-head diameter: 630 mm The gap: 2.4 mm PRODUCTION RANGE Working-width range: 1,500–2,600 mm Film-thickness range: 15–250 μm Maximum output: 600 kg/h Maximum number of "ups": 8 EQUIPMENT Outside corona treatment Profile control Inner-air circulation Ionizer Outside winding, documented as "B /  ...

Details Reference ID: PP-61055 Category: Extrusion Manufacturer: Windmöller & Hölscher Model: VAREX 70/90/70, AB2200 Year: 2001 Max. Size: 2200 mm Min. Size: 1400 mm Condition: Good Location: Europe Availability: Immediately WINDMÖLLER & HÖLSCHER VAREX 70/90/70 AB2200 – THREE-EXTRUDER BLOWN-FILM COEXTRUSION LINE IDENTIFICATION AND EXTRUSION Manufacturer: Windmöller & Hölscher Model: VAREX 70/90/70 AB2200 Process: Blown-film coextrusion Line year: 2002 Number of extruders: 3 Screw diameters: 70 / 90 / 70 mm Central extruder: VAREX 90.30D Die-head diameter: 500 mm The gap: 2.4 mm PRODUCTION RANGE Working-width range: 1,400–2,200 mm Film-thickness range: 15–250 μm Maximum output: 450 kg/h Maximum number of "ups": 6 EQUIPMENT Outside corona treatment Profile control Additional cooling ring Inner-air circulation Ionizer Outside winding, docu ...

Mobile containerised steam boiler plant 2.000 kg/h • Configuration: mobile containerised steam boiler plant with auxiliary systems for independent operation, designed for relocation between sites. • Inspection certificate: the pressure equipment has an inspection certificate issued by accredited pressure equipment inspection body. The certificate covers the equipment and scope of inspection identified in the certificate. • Steam boiler: I.VAR Industry BHP-EN 2000, type PFV1422000, high-pressure, monobloc design. • Performance: steam production 2,000 kg/h, rated boiler output 1,385 kW. • Pressure: 6–10 bar; maximum working pressure of the boiler 12 bar. • Fuel: LPG – propane–butane. • Burner: Baltur TBG 200 LX ME modulating low-NOx gas burner, output range 475–2,000 kW, with Lamtec BT320 electronic controls and LCM100 load controller. • Gas train: DUNGS R2 ...

This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details.

see pictures

REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm

Qty. 1 Second-hand paper production plant – PM5 Mfc.: PAMA line with Voith and Valmet systems Built: 1985 Stopped: 1/2026 Modernised: 1994–2025 Trimmed width: 2,640 mm Speed: 600 m/min Gross capacity: 150 t/day Basis weight: 45 – 130 g/m² Working width: 2,730 mm Paper grades: Office, copy, writing, printing, envelope and newsprint Installed electrical power: approx. 2.5 MW Steam consumption: up to approx. 16 t/h 01 Approach flow system Mfc.: PAMA 02 Headbox Mfc.: Voith 03 Fourdrinier section Mfc.: PAMA 04 Top-wire former Mfc.: Valmet 05 Press section 06 Dryer sections Mfc.: PAMA 07 SpeedFlow system Mfc.: Voith 08 After-dryer section Mfc.: PAMA 09 Calender 10 Pope reel Mfc.: PAMA Modernisations Valmet top-wire former installed / retrofitted in 1994 Approach-flow system expanded and modernised in 2002–03 MAP quality-control system installed / ...

1 of used Kisters filmstation for potential use as training module. Ex a Kisters 197/100 D. Can be supplied with ancillaries such as vacuum fan, film-reel spindle and film brake, etc. Modules for various KHS/Kisters/ZVT machine types in stock!

All types of conveyors according to the buyers specifications

- Stainless steel structure - Belt length: 4000 mm - Belt width: 300 mm - With 4 feet - Without electrical control box

Addressing machine

Dear's Sale, used 5 engine SKL OPEN VALVE CAVER Brgds Hakan KUSCU +905323642509

Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO