v8 used for sale

Axial piston pump, hydraulic pump DAIKIN INDUSTRIES LTD. V8A1RX-20 Vmax.: 8 cm3/U Pressure setting range: 8 - 70 bar shaft diameter: Ø 16 mm Wavelength: 32 mm Groove width: 5 mm Flange diameter: Ø 63 mm hole spacing: 100 mm 2x U-hole: Diameter: Ø 9 mm, Length: 15 mm New ! Dimensions: 205 x 145 x 135 mm

; Mileage [km]: 8; Power [PS]: 220

There is dripping oil problem on piston 85 Ton Folding length : 2500 mm

This OKUMA 2SP-V80 Lathe was manufactured in the year 2002. It is equipped with a twin turrets and spindles. The machine disposes of a 2 chip conveyors with rear exit, 2 3-jaw Hydraulic chuck and a remote manual pulse generator.

This Trumpf TrumaBend V85S Bending machine was manufactured in the year 2003 in Austria. It is equipped with a Trumpf control unit and has 4 axis. The machine has a pressing force of 850 kN and a bending length of 2550 mm.

This TRUMPF TRUMABEND V85S Bending machine was manufactured in 1995 in Germany and has 51193 hours. It is equipped with a Trumpf TrumaBend control unit. The machine does not start, and probably the control system is broken.

Max. pressing force: 850kN, max. stroke: 365mm, compressed air supply: 6bar, connected load: 14kVA, weight: 9.95t, with documentation, without tools, was maintained regularly, an inspection is possible.

Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg

O&K FAUN V80, 8 to Diesel Forklift, 8000 KG, 3.70 m altitude, German Forklift, 8.000 h, Year 1980

Doosan Puma V8300 CNC Vertical Lathe like new condition Control Unit : FANUC-Ä° Chuck : 24 inches Main Spindle Max Chuck 609.6 mm (24) Max Turn Length 750 mm Max Turn Diameter 830 mm X Axis Rapid Traverse 20 m/min Z Axis Rapid Traverse 20 m/min Swing Over Bed 920 mm Spindle Power 37 kW Spindle RPM 2,000 RPM

Exchange aggregate-gene set with engine and generator overhauled on basic frames Scope: -AT crank case -AT crankshaft including new storage -Pistons Squisch (new variant) -Running jacks with coca striping ring (new variant) -AT cylinder heads -AT pleuelbars including storage -Abgasturbolader overhauled with conversion jet ring -Oil pump new -Charge air cooler repaired -Throttle -Gas mixer repaired -Spark plugs new -Compensators new -Exhaust exacensers new -Valve pestle new -Sealing set engine new -Rotary vibration absorbers new -UPF filter crank room ventilation new -Air filters new -Rubber element for clutch new -Generator Marelli MJB 400 repaired Pfandwerte on request: The deposit value depends on the scope of delivery and the condition of the parts returned.

Used cnc machining center SuperMax YCM-V85A control FANUC Series O-M used machining center Brand: SUPERMAX Model: YCM V85A Year: 2001 CNC: FANUC Series O-M Head motor: 5.5kw ISO40 Speeds: 45-8,000rpm Travels (X, Y, Z): 860mm, 440mm, 630mm Table: 950x400mm Maximum table load capacity: 500kg Speeds: 12m/min. The tool loader does not work and is disabled. The hub works fine but without the tool magazine option. It is delivered with a computer for connection to the machine. Includes tools seen in pictures.

Doosan Puma V8300 CNC Vertical Lathe like new condition Production : 11.2019 Max. turning dia. : 830 mm Maximum turning length : 750 mm Maximum spindle speed : 2000 rpm Fanuc control unit

Hydraulic press brake: Trumpf type TrumaBend V85 S rb: 1998. Bending length: 2550 mm; Between columns: 2050 mm Stroke 220mm; Pressure: 85 t CNC controlled press Delem DA65, 2D graphics. Controlled axes -Y1-Y2-X-R+Z1+Z2+I + Wila table bending compensation CNC controlled + hydraulic clamping of upper and lower tools. Pneumatic die shifting. Machine weight 9 t. Drives 11 kW. Tool holder - Wila New Standard. A set of bending tools to the length of the machine. Full original DTR, occupational health and safety manual in Polish.

This DOOSAN V8300MR Lathe was manufactured in the year 2020 in Germany. It is equipped with a FANUC 0iTF Control unit. The machine has a 1 BMT75 Driven Turret with 12 positions (7.5kW, 4500 rpm), a Chip Conveyor with Belt and an axis/spindle Load Monitoring System with triple signal light. It is included a Hydraulic Chuck 15 (380[mm]) and a Standard tool kit: 2 Straight Driven Tools, 2 Angular Driven Tools, 1 Set of Tool Holders for Turning Knives and a Hard Jaws 15 (1 Set: 3 Pieces).

This TRUMPF TrumaBend V85X Bending machine was manufactured in 2003 in Germany. It has a press force of 850 kN and a bending length of 2050 mm. Free upright clearance is 1750 mm. The standard equipment covers a sturdy machine frame, pressure beam with high bending strength and CNC backgauge with rack and pinion drive for X- and R-axis. As special features the machine has an increased installation height and stroke by 150 mm each to 535 mm, a 5-axes backgauge system, a hydraulic and hardened upper tool clamping, a hydraulic lower tool clamping, CNC crowning, a BendGuard safety device, a support front console and control cabinet climatization (for 2-, 4-axis backgauge systems). It comes with a bending tool package. License for software, ToPs 600 for bending, included. See attached original tech specs positions as PDF (German).

Ice Cream Freezer for production from Ice cream Make: Cherry Burrell / Vogt Freezer, Made in UK Type: V8D Capacity: 30...300 kg/h, infinitely adjustable Refrigerant: R 717 Engine: 380V / 50Hz; 10.5 KW; 1,400 rpm product-contacting parts in stainless steel Dimensions: 1.9 x 0.9 x 1.8 m Weight: 600 kg Technical condition: used, very good functional condition

Used York YLCS1110HA 50Y A water cooled chiller on R134A. Complete with 2 York N-A-J semi-hermetic screw compressors, York shell and tube condenser, York shell and tube as evaporator, 2 SWEP V80Hx56/1P-SC-S braced heat exchangers, liquid line filters, pressure gauges, control cabinet with a York display. Specifications Brand: York Type: YLCS1110HA 50Y A Product type: Water Cooled Chiller Capacity kW: 897,0 Capacity Tons: 255,1 Refrigerant: Freon Refrigerant Type: R134A Weight in kg: Operating weight: 6610 kg / Shipping weight: 6000 kg Sizes: 4100x1600x2200 mm (LxwxH) Compressor(s) type & model: 2 York N-A-J Display: York chiller display Number of fans 0 Remarks |: Y.o.b. 2005 Remarks ||: Capacity based on a evaporating temperature of 6/12°C and a condensing temperature of 40/45°C.

Continuous ice cream freezer for the production of ice cream Make: Cherry Burrell / Vogt Freezer, Made in UK Type: V8D Power: 30...300 kg/h, infinitely adjustable Refrigerant: R 717 all product-contacting parts in stainless steel Engine: 380V/50Hz; 10.5 KW; 1,400 rpm Dimensions: 1.9 x 0.9 x 1.8 m Weight: 600 kg Technical condition: used, very good functional condition

Capacity: 85 t Folding length: 2050 mm CNC Brand: Delem PressbrakeTRUMPF - TrumaBend V85 MACH-ID 7632 Make: TRUMPF Type: TrumaBend V85 Control: DA 65 Delem Year: 2002  CNC-Bombierung 2 schnellverstellbare Auflagekonsolen vorne Hydraulische Oberwerkzeugaufnahme "Modufix" Unterwerkzeugaufnahme für Einzel-V-Matrizen mit hydr.Klemmung Maschinenseitige Vorbereitung für Winkelsensorik ACB 2 Zusätzlicher klappbarer Anschlagfinger Sicherheitseinrichtung BendGuard Max. bending length:     2050mm Distance between column: 1750mm Max. pressing force:     85T Dis. Beam - Table:       385mm Beam stroke:             215mm Troth beam:              410mm Approch speed:           200mm/min. Working speed:       ...

Grinding wheel, 7 pieces SEIFFERT T1 - 175x25x51 diameter: Ø 175 mm thickness: 25 mm bore: Ø 51 mm Maximum rotational speed: 40 m/sec Maximum speed: 4370 rpm EK V80-M5-KE EN 12413 ZENR 1938 S1551001 New ! Dimension ( packaging ): 180 x 180 x 180 mm