uv lamp used for sale

GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgSlide 3Longitudinal stroke1200 mmSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...

turning diameter: 330 mm turning length: 830 mm swing diameter over bed slide: 196 mm Swingdiameter in the bed bridge: 170 centre height: 165 mm centre distance: 830 mm Turning length in the bed bridge: 430 reus: 16 (70-2000) U/min tail stock: MK 3 quill stroke: 110 mm diameter of quill: 32 mm spindle taper: DIN ISO 702-2 Nr. 4 spindle bore: 38 mm spindle cone: MK 5 feed: längs 32 / 0,052 1,392 m/min feed: plan 3,2 / 0,014 0,38 m/min total power requirement: kW weight of the machine ca.: 0,52 t dimensions of the machine ca.: 1,7 x 0,75 x 1,6 m Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spi ...

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: 840 D sl ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 max. Torque: 83 / 57 Nm tension force: 8 kN work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - distance: 100 mm T-slot - width: 4x 14H12 / 1x 14H7 mm max. table load: 600 kg table height over floor: 720 mm distance spindle nose and table: 120 - 580 mm Tool-Presetter:: number of toolpositions: 20 pos. Max. mould width: 80 / (130) mm max. tool length: 250 mm max. tool weight: 6 kg max. total weight: 80 kg change-time tool to tool: 1,6 sec change-time chip to chip: 6,0 sec feeds:: rapid traverse: 30 m/min feed speeds: max. 30.000 mm/min Feed force: max. 5 kN total power requirement: 23 kVA weight of the machine ca.: 4,5 t dimensions of the machine ...

Gidue / Bobst I-Combat 430 flexographic printing machine Year 2007 with the following equipment: 12 colors flexographic printing Corona enema Softal Corona multilayer printing (Arcotec) Web storage BST orbit monitoring 2 x additional unwinding / unwinding 2 x Web Edge Controls 2 x Reversible Keuz 2 x rotary punching boxes including 1x GapMaster Sensotec register control Cooler (for cooling rollers) Teknek web cleaning Uviterno UV system including 1x replacement lamp (the UV system received completely new electronics in 2018) 3x screen printing units Including the following printing accessories: 19 Anilox Rollers 2 magnetic cylinders (Z120 / Z124) 78 cliché cylinders of various sizes 50 pairs of sieve rings Technical specifications: Multilayer label printing possible Max speed 180 m/min Max web width 430mm Video and Pictures on request

General2 Axes Universal Turning Machine - tool drive - C axis - Y axis; Control: DMG MORI Slimline Multi-Touch Working areaSwing diameter over guide ways650 mmSwing diameter over transverse guideway465 mmTurning diameter315 mmBar diameter max.80 mmSlide 1Longitudinal stroke600 mmTransverse stroke267 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y10 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)370 NmFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,18 x 2,66 x 1,94) mWeight approx.5800 KgTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWPre-setting Package CTX 450 ecolinePre-setting ...

: neu : ca. 4 Monate ab Auftragse : Taiwan : 46400 € : 951.2 € : 40 -3200 U/min : ISO 40 : 600 x 500 x 400 mm : 1000 x 500 mm : 3,75 kW : 1814 kg : 1000 mm/min : 8 : 14 x 63 mm : 300 kg : 600 mm : 500 mm : 400 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 40 - 3200 : 40 - 3200 : +/- 90° ° : 100 mm : manuell : 3,75 kW : 1200 x 250 mm : 160 - 660 mm : 95 - 495 (2. T-Nut), 180 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 3,75 kW feed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automati ...

: gebraucht : 2004 : 4540 : prompt, Zwischenverkauf v : Österreich : 23700 € : 1 : 63 - 3150 (18) U/min : 700 x 500 x 500 mm : 900 x 500 mm : 6,6 kW : 2150 mm : 2220 mm : 2120 mm : 2550 kg : 500 kg : 100 mm CNCHeidenhain TNC 410 18. mech. feeds with rapid travel in X,Y,Z axes toolmaker accuracyDIN 8615 hyd. tool clamping with holdersSK40 vertical und horizontal vertical spindle+/- 30° swiveling swing out device digital 3D edge finder work area protection coolant equiptment aut. central lubrication fixed angle table with 10 t-slots chip collecting tray machine lamp users manual in GERMAN + CE COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ap ...

filling capacity: 300 kg max. workpiece height: 500 x 200 x 20 mm workpiece weight: 200 kg max. workpiece weight: 15 kg / Stck. revolutions per minute: 22 U/min filling amount: 40-50 % Colour: blau 5015 RAL 0: 625 x 270 mm total power requirement: 1,5 kW weight of the machine ca.: 650 kg range L-W-H: 1 x 1,7 x 1,29 mm Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is i ...

Aggregate type: mobile Execution: Soundproofed Technical data engine: Engine manufacturer: Kohler Engine: KDW1003 Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: LINZ Generator type: Alumen Generator power: 8 kVA Voltage: 400 / 231 Volt Power factor: Cos. - phi 0.9 Speed: 1500 rpm Switchgear: Execution: Key Startup Functions: Hand start Switch: Generator switch 2 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 66 Dimensions of the power unit: Width approx. mm: 1.400 Height approx. mm: 2.500 Length approx. mm: 2.400 Weight approx. KG: 824 Condition: Demonstration machine Year of construction: 2020  ...

Box column drill Alzstar 40S 16 A 380 V Speed 160 - 2250 rpm Length 1 m Width 0.80 m Height 1.80 m Weight 270 kg Work lamp Color: White

Italian lathe brand GRAZIANO model SAG 20; It has a distance between points of 2500 mm; Water Pump; lamp; Dimensions (l x w x h): 4000x900x1350mm; Approximate weight: 3500 kg; Hollow tree: 57 mm.

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large touchscreen: - HMI Maestro Active Edge - Graphic display of all processing units ...

GeneralTwo spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - Counter spindle slide with NC-cross stroke and tailstock; Control: CELOS with Siemens 840D sl Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSpeed range0-5000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle bore87 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmS ...

DMG DMC 160U DUOBLOCK WITH 6 PALLET CHANGER Manufacturer DMG Model DMC 160U duoBLOCK Year 2008 CNC SIEMENS 8400 Powerline 3D Table Rotary pallet changer INCLUDED Rotary pallet storage RS4 – 4 pallets + 2 pallets in machine INCLUDED Total pallets 6 Pallet surface 1.250×1.000 mm. T Slots DIN 55201-A2 Table turning range (C Axis) 0,001 º (Continuous) Travels and feeds Longitudinal travel (X Axis) 1.600 mm. Cross travel (Y Axis) 1.250 mm Vertical travel (Z Axis) 1.000 mm. Main Spindle Automatic swivel milling head 0.001 º (Continuous) Rapid Traverse 60.000 mm/min Spindle taper HSK-A 63 DIN 69893 Spindle speed 20-30.000 rpm Main spindle power 85/65 kW Main spindle torque 40/32 Nm Automatic tool changer Type Horizontal double gripper ATC positions 120 Equipment Internal Coolant 50 bar INCLUDED Coolant deposit capacity 980 l. Oil and emulsion mist separ ...

turning diameter: 324 mm turning length: 600 mm control: SINUMERIK 840D ShopTurn bar diameter: 65 mm swing diameter: 680 mm travel -x axis: 260 mm travel -z axis: 635 mm spindle speed:: 5000 1/min spindle bore: 79 mm C-Axis: 0,025 ° turret head: 12 Pos. / VDI 40 Driven Tools: 12 Pos. 4.500 U/min rapid traverse X-axis: 60 m/min rapid traverse Z-axis: 45 m/min taper in tailstock-quill: MK 5 tailstock travel: 580 mm drive capacity - spindle motor: 25 kW voltage: 400 V total power requirement: 50 kVA weight of the machine ca.: 6,0 t dimensions of the machine ca.: 3,50 x 2,46 x 2,10 m chip conveyor: 4,00 x 1,25 x 1,50 m - Serial-No.: 02260001561 - Machine ON: 64.692 h - Programm ON: 18.296 h - control: SIEMENS 840D ShopTurn - electrical hand wheel - C-Axis / driven tools - Spindle bearings NEW - Ball screw Z-Axis incl. bearings NEW - chip conveyor - coolant equipment - machine lamp The dat ...

turning diameter: 324 mm turning length: 600 mm control: Data Pilot 4290 HEIDENHAIN swing diameter: 680 mm bar diameter: 65 mm travel -x axis: 260 mm travel -z axis: 635 mm spindle speed:: 5000 1/min spindle bore: 79 mm C-Axis: 0,025 ° turret head: 12 Pos. / VDI 40 Driven Tools: 12 Pos. 4.500 U/min rapid traverse X-axis: 60 m/min rapid traverse Z-axis: 45 m/min taper in tailstock-quill: MK 5 tailstock travel: 580 mm drive capacity - spindle motor: 25 kW voltage: 400 V total power requirement: 50 kVA weight of the machine ca.: 6,0 t dimensions of the machine ca.: 3,50 x 2,46 x 2,10 m chip conveyor: 4,00 x 1,25 x 1,50 m - Serial-No.: 02260003251 - Machine ON: 19.039 h - Programm ON: 2.676 h - control: HEIDENHAIN Data Pilot 4290 - New main spindle bearings - Z-Axis ball screw reconditioned incl. new bearings - electrical hand wheel - C-Axis / driven tools - chip conveyor - coolant equipmen ...

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm current capacity: 380 kVA power capacity - grinding motor: 1,1 kW speeds of grinding spindle: 2 - 10.000 U/min total power requirement: 2,2 kW Mechanic: very good: Optical condition: very good: Condition: general reconditioning: The machine can be viewed under current.: operating key and instruction: Machine and accessories completely overhauled with CE marking 400 V, 50 Hz, with CEE plug and cable BASICMACHINE! built of year 1988 / overhauled in 2023 Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light gray motorized height adjustment, axial grinding spindle adjustment Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMV screw ...

This OMP EURO 400 CMCNPRL Sawing Machine was built in the year 2015 in Italy. The machine has a blade diameter of 400 mm and a clamp max. span of 140 mm, and a lamp jaw height of 70 mm.

This KASTO speed C 14 Sawing machine was manufactured in the year 2004 in Germany. It is equipped with a chip removal. Disposes of a signal lamp and a Hydraulic lift roller.

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: Machine stand and carrier plate ground Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker >  ...

Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...

x-travel: 390/400 mm y-travel: 210/220 mm z-travel: 390/400 mm turning speeds: 25-2500 U/min feed: 8-400 mm/min rapid traverse: 1500 mm/min quill stroke: 100 mm tool taper: Sk 40 x S 20 x 2 drive motor: 2,0/3,0 kW total power requirement: kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: m Optical condition: good: Mechanic: good: The machine can be viewed under current.: 2202 11050 380 V, 50 Hz, with CEE plug and cable Color green Equipment: 3 Axis Active Digital Display (HH) TNC 113 Vertical head Sk 40 Coolant device Centralized lubrication pump Free-running safety wheels Stepless feed Emergency stop switch Engine brake New scrapers New bellows Great maintenance done Lockable main switch 10 tool holders fixed angle table (planed) Chip tray 4 machine shoes Cold light lamp Instruction manual, spare parts list, circuit diagram Control key u. driver ri ...

CNC controller: FANUC 15i-M Axes; X-axis travel mm: 9.000 Y-axis travel mm: 3.900 Z-axis travel mm: 900 W-axis travel mm: 1.600 (distance between columns 3.100 mm) Distance spindle nose - table surface mm: 2.440 Feed rates m/min: 6 (X,Y,Z) 3 (W) Rapid traverse m/min: 20/9 (X,Y) 10(Z) 6(W) Worktable; Number of pallets: 2 (table automatic changer) Table dimensions mm: 2.700x8.000 Max. workpiece weight kg: 20.000 Spindle; Spindle speed rpm: 5-3.000 (2 ranges) Spindle drive power kW: 30(50% ED)/22 Spindle torque Nm: 2.170 Tool system; Tool holder: MAS BT50 Tool magazine slots: 180 Equipment; Chip conveyor Signal lamp High pressure pump Tool breakage probe Preapared for RENISHAW sonde RENISHAW Measuring probe Rated power kVA: 150 AAC (Automatic Attachement Changer): Capacity = 5 Attachements and their cases: 1) Snout 190 2) Small Angle head 5 Faces Cutter Head ...

CNC controller: FS-31IA(MAPPS 3) Capacity Turning length mm: 1.500 Turning diameter f. lower turret mm: ø350 Max. turning diameter mm: ø 660 Swing over cross-slide mm: ø730 Turn-mill spindle X-axis travel mm: 750 Y-axis travel mm: ±210 Z-axis travel mm: 1.550+100(for ATC) B-axis degree: ±120º (1º index) Speed spindle rpm: 12.000 Drive power kW: 18,5/11 (10min/cont) Tool magazine Magazine places: 100 Tool holder: Capto C6 Tool length max. mm: 400 Tool diameter max. mm: ø140 Tool weight max kg: 8 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Indexing time s: 0,28 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22/18,5 (30min/cont) Spindle nose: JIS A2-8 Counter spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22/18,5 (30min/cont) Spindle nose: JIS A2-8 Equipment Chip conveyor Signal l ...

Surface-mounted luminaire, industrial lamp, wall and ceiling luminaire, with emergency luminaire SCHREIBER KH 400-HME ( KH400-HME ) Article number: 670 740 400 W 230 V AC 50 Hz New ! Dimensions: 430 x 185 x 600 mm

Insect killer fly lamp

Control box with switching elements, pre-wired SATMATIC U61384-025 4 x push buttons, 3 x with control lamp 1 x key switch with one key 1 x emergency stop used, tested ! Dimensions(control box): 300 x 200 x 160 mm Dimensions: 340 x 200 x 220 mm

Mechanical Lamp, System Light WALDMANN WD306 3x 6 W 220 V AC 50 Hz Cable length: approx. 1.4 m Mounting base: 60 x 60 mm used, tested ! Dimensions ( packed ): 470 x 170 x 120 mm

x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: MSC- 500 table-size: 900 x 450 mm table load: 700 kg Distance spindle nose and table: SK 40 no. of tools in the magazine: 20 Stück turning speeds: 8000 U/min power capacity: 7,5 kW rapid travel x/y/z: 20/20/15 m/min feed: 0- 5 m/min weight: 6,3 kg dimensions: 2,6 x 2,6 x 2,77 m 3 axis Vertical Machining Center in good condition, attached 4th/5th axis, - 4th and 5th axis with own control - tool changer double arm gripper - signal lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mast attachment, for street, path, square lighting ELSPRO SCOOPLED ESL/M842 Material: stainless steel Pipe dimension ( outside): 88.9 mm / 140 mm, material thickness: 3 mm Mast diameter: Ø 67-80 mm / 117 - 130 mm 2 Carrying port: horizontal ( 0° version ) Diameter: Ø 50 mm, length: 220 mm, material thickness: 2 mm with recess for cable outlet and plate: 90 x 30 mm, for straight alignment of the lamp suitable lamps - see EL3238 and EL3239 ! New ! Dimensions: 540 x 150 x 460 mm

Moisture-proof bathtub luminaire, wall and ceiling lamp, 2 pieces TRILUX Oleveon 118 E Article number: 10025773, 5218804 1x 18 W 230 - 240 V AC < br />50 - 60 Hz bulbs: T26 socket: G13 Ballast ( electronic ): OSRAM QUICKTRONIC PROFESSIONAL QTP-DL 1x18-24 without bulbs ! New ! with documents ! Dimensions ( recessed light ): 660 x 100 x 105 mm Dimensions ( packaging ): 670 x 165 x 110 mm

LED task light, LED system light LED2WORK GmbH UNILED SL 100 110914-13 Material ( housing ): Aluminium Material ( cover ): plastic, matte profile ( height x width ): 35 x 85 mm length: 1045 / 1075 mm 48 W 24 V DC IP50 with lamp holder ( joint bracket ) used, tested ! Dimensions: 1100 x 85 x 75 mm

LED task light, LED system light LED2WORK GmbH UNILED SL 100 110914-14 Material ( housing ): Aluminium Material ( cover ): plastic, matte profile ( height x width ): 35 x 85 mm Length: 1545 / 1575 mm 72 W 24 V DC IP50 with lamp holder ( joint bracket ) used, tested ! Dimensions: 1600 x 85 x 75 mm

electronic ballast, digital electronic ballast CEAG ECG d 165 ex fluorescent lamp: TLX65W 220 - 250 V AC 50 / 60 Hz Ex-proof ! used, checked ! Dimensions: 270 x 100 x 50 mm

Indicator light, recessed lamp, signal light, 100 pieces DOBRULUX T13 Colour: green max. 250 V < br /> max. 2 W ( Watt ) Front panel installation: Ø 13 mm Solder terminals Material ( housing ): Bakelite without bulb ! New ! Dimensions ( indicator light ): 58 x 16.5 x 16.5 mm Dimensions ( packaging ): 200 x 200 x 60 mm

bore capacity in steel (diameter): 50 mm bore capacity in cast iron (diameter): 60 mm threading cutting capacity:: M36 throat: 400 mm bore stroke: 230 mm spindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range: 54 - 1032 U/min transmission ratio: 12 Stufen column diameter: 200 mm table surface area: 550 x 550 mm total power requirement: 3,0 kW weight of the machine ca.: 0,72 t dimensions of the machine ca.: 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-a ...

: neu : 2023 : 4546 : prompt, Zwischenverkauf v : Taiwan : 39400 € : 807.7 € : 1 : 65 - 2600 U/min : ISO 40 : 420 x 220 x 380 mm : 840 x 390 mm : 2,2 kW : 1145 kg : 840 x 390 mm : 1000 mm/min : 5 : 14 x 63 mm : 200 kg : 420 mm : 220 mm : 380 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 65 - 2600 : 90 - 310 mm : 65 - 2600 : +/- 90° ° : 100 mm : manuell : 2,2 kW : 950 x 250 mm : 90 - 310 mm : 100 - 480 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spi ...

Safety switch TELEMECANIQUE XY2. CA230 main rope length: approx. 4.6 m release rope length: approx. 0.5 m with handle with converter XAL-T94 and indicator lamp 6 V 1.5 W used, tested ! Dimensions (without rope): 280 x 190 x 110 mm

bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 feed range - spindle: 30 - 400 mm/U spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE m ...

bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark The data for this ad was creat ...

Contimeta SIAT SM116 - K11/70 Automatic carton sealer with automatic folding system and manual format adjustment Automatic machine for standard closing The carton sealer automatically folds the upper lid flaps by means of guide rails and a closing arm 2 motorized lateral conveyors with a width of 50 mm Transport speed 20 meters per minute Voltage 400V signal system for tape end or breakage special painting: frame color RAL 5003, covering safety cage RAL2001 Energy saving system Special design: 3 colored indicator lamp: green/orange/red for machine condition ok / tape almost empty / tape broken. Including potential free relay contacts for these signals Carton is only glued on top, not on bottom Carton dimensions L x W x H (mm): Min. 300 x 150 x 180, Max. 900 x 650 x 700 The SM11-6 processes between 600 and 1000 cartons per hour The guide rails are manually adjustable The height of the sea ...

Key data: 1050 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03920 Type of machine Machining Center - Vertical Make MORI SEIKI Type NV 5000 B / 40 Year of manufacture 2004 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time on request Freight basis ex location Technical details x-travel 1050 mm Y-Travel 510 mm Z-Travel 510 mm Control FANUC MSG 501 turning speeds 12000 rpm tool change unit 30 table-size 1100x600 mm Drive 18,5/11 kW tool taper BT 40 transmission ratio 1 spindle diameter in front bearing 65 mm table load 1000 kg T-slots 6x18x100 mm distance spindle /table 150-660 mm max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool weight 8.0 kg Change-time tool to tool approx. 1.0 sec Change-time chip to chip approx. 2.6 sec Rapid Traverse 42 m/min feed speeds 1-6000 mm/min total power requirement 48 kVA Weight of the mac ...

Key data: 400 mm, 400 mm, 375 mm

Machine Details Stock-No. 1105-03922 Type of machine Machining Center - Universal Make DMG DECKEL MAHO Type DMU 40 EVO Year of manufacture 2013 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 400 mm Y-Travel 400 mm Z-Travel 375 mm control iTNC 530 Heidenhain Turning speed range - Main spindle max. 20,000 min/-1 power capacity - main spindle 19 kW max. torque 130 Nm tool taper SK 40 swivellable -105+ 40 ° table surface area Ø 450 mm T-slots 7x 14 x 63 mm max. table load approx. 275 kg rotatable C: 360° Max. workpiece diameter 500 mm max. workpiece height 400 mm number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8.0 kg Change-time chip to chip a ...

Key data: 250 mm, 1035 mm

CNC controller: FANUC 18iTA MAPPS & 10,4" SCREEN Capacity X-axis travel mm: 235 Z-axis travel mm: 1.045 Turning length mm: 1.035 Max. turning diameter mm: ø 250 Bar work capacity mm: 74 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 3.000 Drive power driven tools kW: 6,5-4,4 Indexing time s: 0,2 Main spindle Speed spindle rpm: 4.200 Drive power spindle kW: 18,5-15 Spindle bore mm: 75 Chuck type: ASA A2-8 Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Spindle bore mm: 45 Chuck type: ASA A2-5 Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp various rigid tools Blowing air outside the spindle Rated power kVA: 53 Robot for piece manipulation included Basic machine dimensions / weight Length mm: 3.700 Width mm: 1.900 Height mm: 1.900 Weight kg: 5.600

Perkin Elmer PinAAcle 900 F Flame AAS Perkin Elmer AAS PinAACle 900F F Flame AAS True double beam, 8 –lamp mount, Fibre Optic light path automated flame and burner optimization PC and Perkin Elmer WinLab Software Lamps on request Last Service 07/2022 with warranty

faceplate diameter: 3.000 mm swing diameter: 4.000 mm turning height: 2.500 mm Control: Fanuc 0i-T max. workpiece weight: 30.000 kg table:: table diameter: 3.000 mm table speeds: 1 - 100 1/min power capacity - table: 60/75 kW C - Axis:: Working speed: 0 - 180 °/min max. table speed: 0,5 1/min turret slide:: Shank diameter: 50 mm spindle cone: ISO 7/24 No.50 Spindlespeed: 15 - 1.500 min/-1 power capacity - Tool Spindle: 22 / 26 kW ram cross section: 300 mm axis stroke:: x-axis: 2.335 mm z-axis: 1.600 mm cross rail adjustment: 2.000 mm Tool-Presetter:: tool taper: MAS BT 50 number of toolpositions: 24 (2x12) pos. max. tool weight: 90 kg draw bolt: DIN.69872 feeds:: rapid feed (X / Z): 8 m/min rapid traverse of the crossrail: 500 mm/min total power requirement: - kW weight of the machine ca.: 95 t dimensions of the machine ca.: 14,0 x 7,4 x 9,0 m Documents: Coolantsystem: 4-Jaw-Chu ...

turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main s ...

turning diameter: 440 mm turning length: 1500 mm swing diameter over bed slide: 210 mm Swingdiameter in the bed bridge: 620 mm centre height: 210 mm reus: 21 (20 - 2000) U/min tail stock: MK5 quill stroke: 180 mm diameter of quill: 70 mm spindle taper: DIN 55027 Nr. 8 spindle bore: 62 mm feed: längs 0,04 - 12 m/min feed: quer 0,02 - 6 m/min total power requirement: 7,5 kW weight of the machine ca.: 2430 kg dimensions of the machine ca.: 2850 x 980 x 1330 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0 ...

Manufacturer: Hackemack UV Trockner 1 Lampe 1300 mm, Type: 2008 Umgebaut, Year: 2000+2008, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 80, Working widht max mm: 1400, Number of lamps: 1, kW power 1 lamp: ca.10, kW power all lamps: 15, Lampenlänge mm: 1450, Reflektor von oben abnehmbar: yes, Lamps straight installation: yes, Elektronische Leistungregelung: yes, Position of lamps: gerade, Conveyor lenght mm: ca.3000, Conveyor lenght mm: ca.3000, Outer belt width mm: 2400, Feeding speed m/min: 6-30, Drive power kW: 1,2, Feedin speed m/min: 6-30, Year :2000+2008