uv lamp used for sale

Light table, 2x 18W. Adjustable positions. In very good and clean condition.

Lampertz S 60 P Data Backup Cabinet Grade S 60 P identifies a fire safe according to the European standard EN 1047-1 that protects paper contents from fire for at least 60 minutes. The "P" stands for "paper", and the test includes a 60-minute fire test at 1090 degrees Celsius, as well as a fall test from a height of 9.15 meters to simulate protection in the event of a ceiling fall. Key features of the Lampertz S 60 P Fire protection: 60 minutes fire safety for paper documents according to EN 1047-1 Fire resistance: Protection at up to 1090°C Burglary protection: resistance level 1 according to EN 1143-1 Manufacturer: Lampertz Type: Backup Cabinet Audit Rating: 1484 Fire protection class: S 60 P 8-way bolt lock Stop side: right Curb weight: 604 kg Dimensions: (H x W x D) 1960 x 870 x 600 mm More items - new and used - can be found in our shop! International s ...

Refer to code 1028 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Bürkle, Type: UV Lampe, Year: ca 2018, Work piece width min-max mm: 1300, Length mm: 1420, Year :ca 2018

Manufacturer: Hackemack 2 Lampen UV Trockner, Year: 2000-2008, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-80, Working widht max mm: 1400, Number of lamps: 2, kW power 1 lamp: 25, Lampenlänge mm: 1400, Lamps straight installation: yes, Elektronische Leistungregelung: yes, Outer belt width mm: 2400, Feeding speed m/min: 6-30, Conveyor: Band, Exhaust air diameter mm: 2 X 200, Year :2000-2008

Manufacturer: 3 Lampen Purete UV-Trockner PRT-U3113e 120 Watt elektronische Leistungregelung 1300 mm, Type: PRT-U3113e, Year: neu, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 3, kW power 1 lamp: ca. 11,2, kW power all lamps: ca. 39, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: no, Lamps inclined installation: yes, Abluftmenge cbm/h: Stange, Feeding speed m/min: yes, Heating battery: 2.300 x 1.850 x 1.700, Year :neu

Manufacturer: Purete, Type: 3 Lampen UV Trockner, Year: 2017, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 5-100, Working widht max mm: 1300, Number of lamps: 3, kW power 1 lamp: 11,2, kW power all lamps: 37, Lampenlänge mm: 1400, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: 2300, Lamps straight installation: yes, Adjustable: halblast, Chain pitch mm: 45, Feeding speed m/min: 5-20, Conveyor: Stange, Drive power kW: ca,1,0, Exhaust air diameter mm: 3 X 120, Year :2017

Lampertz Doku Data Safe PE12 Data Backup Cabinet Lampertz Doku Data Safe Data Backup Cabinet Locker insert Documentary Floppy Tray Shelf with slots Right stop side Fire protection class S 120 P according to EN 1047-1 2 hours of fire safety for documents and paper Resistance grade 1 according to EN 1143-1 Year of Make: 2005 Overall dimension Height: 1976 mm Width with hinge: 955 mm Depth incl. handle: 777mm Internal dimensions Height: 1714 mm Width: 734 mm Depth: 440 mm Weight: 850 kg More items - new and used - can be found in our shop! International shipping costs on request!

1 LAMPERTI shearing machine type C/L81, year 1988, shearing roller spirals width 200 cm, shearing roller equipped with 24 shearing spirals, entry with metal detector,

Part No.: 42.35.53 // S. No: 3.278-870805-1 Equipment / Additional information Technical data and description: see pictures

UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface heater -Manufacturer: Hönle, UV drying system for drying paints, varnishes and plastics -Type: Uvaprint 420 HPLK, incl. lamp -Number: 4x UV dryers available -Price: per piece -Dimensions: 600/355/H140 mm -Weight: 16 kg/piece

Checked and ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Feed length - 0.1 - 6500 mm Width 20 - 300 mm Belt thickness 1.0 - 3.0 mm Material Quärschnitt 500 mm2 motor - 2,2 kW Complete documents more info on request

Automatic case packaging machine (rebuilt in 2012) for american cases. Machine including feeding system, 2 formats (incl. Seidenader camera vision system), and other accessories. Furthermore including exit belt with PAGO labeling system.

Alfa Laval UVPX 307 AGT 14 Separator Centrifuge Oil Fish, Olives 5750l/h Motor 5.5 kW

JenActUV UV Torpedo conveyor Model: UVTCONV500 Serial: 26557-PO1 Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below the wire facing upwards. This is set up to achieve disinfection on all sides of a product placed on the conveyor, HMI touch screen controls, belt dimensions 3500mm x 500mm, stainless wire mesh belt, with manual, 1Ph

Used freezer cell KOMA, type: - Large freezer cell for 55 to 60 rack trolleys - down to -25°C - Cooling capacity: 25.1 kW - Condition: very good - Location: Germany Viewing possible on request.

Soap dispensers, universal dispensers, disinfectant dispensers -Manufacturer: Uvex, earplug dispenser -Type: for disposable earplugs uvex xtra-fit -Quantity: 1 available -Dimensions: 185/170/H480 mm -Weight: 1.1 kg

Used decanter made by Alfa Laval, model: UVNX 314. Two motors: 7,5 kW and 3 kW. Parts in contact with the product in stainless steel. Max drum speed 3250 rpm. Documentation available. The machine was used for edible oil.

Timber saw SAB UVK41 complete line

From an operational resolution: Zagro UVB Z 500 S YEAR OF MANUFACTURE unknown 380 VOlt Emergency stop Saw rollers Ø 500 mm Cutting length 700 mm Cutting width 450 mm Cutting heights 530 / 650 mm Saw blade lengths 3720 / 3920 / 4120 mm Table size 1000 x 800 mm AC 230 V / 16 A Width 1000 mm Total height 1800 mm Total weight 180 kg ----Engine cover is missing--see photo---

Column Drill Type: AX3S Year of Make: 1985 Condition: very good, fully functional Sale is made according to the posted photos. Without a vice! Delivery for an extra charge by freight forwarder !

pressure:300 t distance between columns:1800 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table surface area:1600 x 1200 mm Table height above floor:1080 mm Ram surface:1600 x 1200 mm Weight:24,0 t Dimensions (WxDxH):2,8 x 2,1 x 6,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

Manufacturer: Hymmen UV Trockner, Type: UVK, Year: 2004, Work piece width min-max mm: 1300, Number of lamps: 3, kW power 1 lamp: ca.10, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 80, Conveyor lenght mm: 3450, Outer belt width mm: 1800, Working hight approx mm: 60, Feeding speed m/min: 5-25, Conveyor: Band, Drive power kW: 1,5, Year :2004

pressure: 500 t distance between columns: 1220 mm max. ram stroke: 600 mm distance table/ram, max. stroke up, adjustment up: 1000 mm table surface area: 1600 x 1200 mm die-cushion pressure inside the table: 320 t stroke of drawing cushion in table: 150 mm drawing cushion surface in table: 750 x 812 mm die-cushion pressure in pusher: 180 t stroke of drawing cushion in pusher: 100 mm drawing cushion surface in pusher: 750 x 625 mm ram surface: 1600 x 1200 mm table height over floor: 800 mm feed down: 665 mm/sec feed up: 530 mm/sec working feed: 34 - 100 mm/sec quantity of oil: 2000 l power capacity: 180 kW weight: 40 t dimensions of the machine ca.: 3,2 x 2,4 x 7,5 m by using oil-hydraulic drive, hydraulic and electric control UVV, die cushion in bed and slide, adjustable drawing speed, punching limit with damping plunger lock, electric cabinet Our list price is WITHOUT starting the machin ...

pressure: 40 t distance between columns: 495 mm stroke: 150 mm distance table/ram, max. stroke up, adjustment up: 300 mm table surface area: 490 x 400 mm hole in the table: 50 mm table height over floor: 950 mm column travel -side: 155 mm ram surface: 150 mm feed down: 480 mm/sec feed up: 480 mm/sec working feed: 20 mm/sec oil volume: 115 l power capacity: 7,5 kW weight: 2,2 t dimensions of the machine ca.: 1,35 x 1,00 x 2,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Machining Center Manufacturer: Unverzagt Type: UVA 550 Plus Year of Make: 2012 Control: Siemens 828D Operating hours: approx. 3,000 Travels: X/Y/Z: 600 x 400 x 500 mm Tool locations: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Wireless Push Button Hexagon Conveyor Spindle coolers IKZ (internal cooling system)

Production speed: 600 cups/min Colours: 8 Min cup diameter: 60mm Max cup diameter: 130mm Min. cup height: 30mm Max- Cup height: 160mm Counter: 25’731’666 cups produced Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler

- Producer Venjakob / Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

General SKU227T233 MakeUVA Packaging TypeNEWTON 400 I No.2003517 Year of construction2003 Mounted in framecheck Main Features MaterialStainless steel Specified Features - Powder filler Bag fillercheck Pneumatic fillingcheck Dosingmax. 3 kg Capacitymax. 120 bags/min. With motorcheck Information LocationBarneveld With switchgearcheck Floorspace2,2x1 m Total height2,6 m Weight950 kg CEcheck Extra SpecificationsTechnology Intermittent Motion Bag width 100-400 mm Bag width, block bottom 60-270 mm Front to back, block bottom 50-140 mm Bag length 600 mm Power consumption 10/12,5 kVA Air requirements 6 bar Maximum film roll width 840 mm (XL 1040) Maximum film reel diameter 700 mm Core diameter 76 mm or 156 mm Maximum machine output 120 bags/min. Machine weight approximately 950 kg Powder fillersPBB-UVAPackaging machines > Powder fillersBrand > PBB-UVA What you can expect f ...

General SKU079B444 MakeAviteq Vibrationstechnik TypeOA-1150/350-UVB No.6300095-001 Mounted on framecheck Specified Features - Vibro feeder Material finishPolished inside Main Features MaterialStainless steel Length1150 mm Width350 mm Vibro feeders MaterialStainless steel Vibro feeder(1x) Feeder width350mm Feeder length1150mm Feeder height275mm Closedcheck Inlet355x355mm With motor0,3 KW, 230/400 Volt (2x) Information LocationBarneveld Floorspace1,8x0,9 M Total height1,0 M Weight380 KGVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 3-axis HOMMEL UNVERZAGT UVA 1030 PLUS was manufactured in 2011. It features a robust cast iron base, a 20-position tool magazine, and a Siemens 828D control with ShopMill. The machine offers a spindle speed range of 10-8,000 rpm and a rapid traverse rate of 30 m/min. If you are looking to get high-quality milling capabilities, consider the HOMMEL UNVERZAGT UVA 1030 PLUS machine we have for sale. Contact us for more information about this machine.

turning speeds: 450 / 700 / 1.400 U/min transmission ratio: 3 output: 0,2 / 0,5 / 0,6 kW current: 0,6 / 1,0 / 1,1 A table surface area: 540 x 390 mm 0: 380 V / 50 Hz chuck: RÖHM / 165 mm Brush diameter: 235 mm dimensions: 0,80 x 0,44 x 1,13 mm weight: - kg Brushing Machine HAHN & KOLB - UVM Type 2 - incl. braking system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Cefla, Type: UVM Superfokus, Year: 2014, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-60, Working widht max mm: 1400, Number of lamps: 1, kW power 1 lamp: ca.16, Lampenlänge mm: 1450, Gesamtlänge UV Modul mm: 3000, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Automatische Werkstückerkennung : yes, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: yes, Position of lamps: gerade, Conveyor: Rolle, Drive power kW: 0,75, Through running hight mm: 90, Feedin speed m/min: 3-5, Year :2014

pressure:400 t distance between columns:3250 mm distance table/ram, max. stroke up, adjustment up:1000 mm stroke:800 mm table surface area:3250 x 1400 mm table height over floor:1250 mm die cushion capacity:170 t die cushion stroke:200 mm die cushion area:1800 x 1000 mm distance between cutting impact cushioning:2610 mm side window:800 mm ram surface:3250 x 1400 mm return capacity:51 t speed down:300 mm/s speed up:300 mm/s working speed:16 - 33 mm/s quantity of oil:2900 l power requirement:100,0 kW weight:70,0 t Dimensions (WxDxH):4,9 x 3,1 x 7,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact absorption:hydraulic

Pressure:080 t throat:380 mm stroke:8 - 112 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:472 mm table surface area:840 x 610 mm table height over floor:800 mm passage to the back:520 mm ram surface:650 x 400 mm ram adjustment:70 mm power capacity:7,5 kW weight:6,9 t Dimensions (WxDxH):1,1 x 2,15 x 3,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical ram counterbalance:pneumatic clutch-/ brake combination:pneumatic

pressure:250 t distance between columns:930 mm stroke:200 mm Distance table/ram, stroke up:600 mm table surface area:900 x 860 mm die cushion capacity:100 t die cushion stroke:50 mm die cushion area:350 x 400 mm table height over floor:950 mm side window:380 x 380 mm ram surface:850 x 700 mm feed down:400 mm/s feed up:400 mm/s working feed:30 mm/s oil volume:350 l power capacity:45,0 kW weight:11,5 t Dimensions (WxDxH):2,0 x 1,2 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic depth stop:mechanical foundation pit:not necessary

pressure:1000 t distance between columns:3030 mm stroke:350 mm Distance table/ram, max. stroke up, adjustment up:1400 mm table surface area:3000 x 2000 mm table height over floor:430 mm side window:1450 x 1400 mm ram surface:3000 x 2000 mm speed down:300 mm/s speed up:340 mm/s working speed:18 - 44 mm/s return capacity:120 t oil volume:4400 l width with platform:4950 mm power capacity:2 x 90,0 + 10,0 kW weight:87,0 t Dimensions (WxDxH):4,35 x 3,65 x 7,55 m height over floor:6,05 m height beneath floor:1,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:200 t distance between columns:1650 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1600 x 1250 mm die cushion capacity:80 t die cushion stroke:300 mm die cushion area:1300 x 900 mm table height over floor:800 mm ram surface:1600 x 1250 mm oil volume:ca. 2000 l power capacity:43,0 kW weight:25,0 t Dimensions (WxDxH):2,9 x 2,3 x 5,8 m height beneath floor:0,85 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20

pressure:350 t distance between columns:1350 mm stroke:900 mm distance table/ram, max. stroke up, adjustment up:1300 mm table surface area:1300 x 1000 mm pressure of drawing cushion in table:100 t stroke of drawing cushion in table:380 mm die cushion area:350 x 285 mm capacity of ejector in ram:25 t ejector stroke in ram:200 mm table height over floor:750 mm ram surface:1300 x 1000 mm speed down:500 mm/s speed up:160 - 470 mm/s working speed:16 - 44 mm/s drawing speed:57 - 160 mm/s return capacity:32 t oil volume:1700 l power requirement:91,0 kW Dimensions (WxDxH):3,75 x 2,8 x 7,2 m height over floor:5,28 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick drawing cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:in TDC foundation pit:necessary

Pressure:500 t distance between columns:1550 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1200 x 1300 mm pressure of drawing cushion in table:250 t stroke of drawing cushion in table:150 mm die cushion area:950 x 950 mm table height over floor:1245 mm side window:1250 mm ram surface:1200 x 1300 mm speed down:750 mm/s speed up:780 mm/s working speed:105 mm/s oil volume:4000 l power requirement:263,0 kW weight:45,0 t Dimensions (WxDxH):3,3 x 3,3 x 6,1 m height over floor:6,1 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic cutting impact cushioning:motoric adjustable

Pressure:315 t distance between columns:1350 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1200 x 1300 mm table height over floor:1245 mm side window:1250 mm ram surface:1200 x 1300 mm speed down:750 mm/s speed up:680 mm/s working speed:180 mm/s oil volume:2000 l power requirement:150,0 kW weight:35,0 t Dimensions (WxDxH):3,3 x 3,3 x 5,5 m height over floor:5,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:motorisch verstellbar ram interlocking:hydraulisch

pressure:200 t throat:360 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:780 mm table surface area:740 x 720 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:200 mm die cushion area:530 x 530 mm table height over floor:920 mm ram surface:560 x 560 mm slide drill hole x depth:70 mm power requirement:35,0 kW weight:10,0 t dimensions:1,3 x 2,0 x 3,4 m

pressure:160 t distance between columns:1340 mm stroke:300 mm Distance table/ram, max. stroke up, adjustment up:620 mm table surface area:1300 x 900 mm table height over floor:930 mm side window:600 mm ram surface:1300 x 900 mm speed down:367 mm/s speed up:390 mm/s working speed:58 mm/s power requirement:30,0 kW weight:15,0 t Dimensions (WxDxH):2,5 x 2,2 x 4,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 foundation pit:not necessary

UVP HL-2000 Hybridization Incubator Temperature range: From ambient temperature +10°C to 99.9°C Hybridization furnace Model: HL-2000 HybriLinker 2 independent devices in 1 Membrane fixation by 254nm UV irradiation and hybridization Stainless steel interior Door with glass window protecting from ß emissions For long tubes. 300mm max The rotating wheel can hold up to twenty 35 x 150 mm bottles and ten 35 x 300 mm bottles at a time Membrane drawer with UV-resistant viewing window In excellent condition Tested at 37°C

Pressure:063 t throat:250 mm stroke:10 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:380 mm table surface area:700 x 500 mm hole in the table:180 x 140 mm table height over floor:700 mm ram surface:360 x 275 mm ram adjustment:60 mm power requirement:5,5 kW weight:3,8 t Dimensions (WxDxH):1,9 x 1,7 x 2,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical