Model
(Manufacturer: SCHROEDER)
The Schröder N55 Injector is an industrial multineedle injector designed for professional food processing operations. Equipped with 55 needles and a conveyer belt system, it ensures even injection of brine, marinades or other liquids into meat products. Its stainless steel construction provides durability and hygiene, while pressure and speed controls allow precise process adjustment. Suitable for medium to large production environments requiring high throughput and consistent results. Technical specifications: Manufacturer: Schröder With transport belt Stainless steel construction 55 needles Approximate dimensions in cm: Length: 240 Width: 110 Height: 150 Control: pressure regulation and speed control Application: meat processing, injection of brine/saline into muscle products
Key data: 3200 mm, 1 mm
with motor depth stop 1000 mm, with CNC graphic touch control POS2000 on the swivel arm, with offset bending beam Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3200 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm Max. back gauge: 1000 mm Colour: blue/grey Dimensions: 4450 x 2000 x 1850 mm Machine weight: 2700 kg Upper beam stroke: 150 mm without roller scissors Opening width: 150 mm Bending angle (max.): 160 degrees Machine number: 8500110
Key data: 3200 mm, 2 mm
Motorized guillotine shears, can be operated from the front with manual depth stop 750 mm, with digital display Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3200 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 2.5 mm Sheet thickness front: 1.5 mm Farbe/Colour weiß/blau Total power requirement: 32 A Machine weight: 2220 kg Dimensions: 3700 x 2500 x 1600 mm without cutting gap adjustment Connected voltage: 3 x 400 V/50 hz Connected load :5.0 kVA Projection: 750 mm Min. back gauge: 750 mm Machine number: 2300840
Key data: 3020 mm, 1 mm
in good condition, POS 400 control with digital display, without stop system, with standard rail Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 3020 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Blechdicke VA/sheet thickness Stainless 1.0 mm Colour: white/blue Dimensions: 3930 x 700 x 1175 mm Machine weight: 2120 kg Motor power: 0.55 kW Upper bolster stroke: 120 mm without cutting device for cutting to length Bending angle (max.: 145 degrees Machine number: 180928
Offer 25507 Technical data: - Max. working width 2520 mm - Max. material thickness 2.0 mm - Cutting angle 2.2 ° - Stroke rate up to 25 1/min - Back gauge with ELGO positioning control up to 750 mm - Table height 850 mm - Front angle stop 2000 mm - 2 front support arms 1000 mm - pneum. Supported sheet metal hold-up - E-footswitch - Typing - Single stroke pre-selectable - Rear protection grille - Drive 400 V / 3 kW - Space requirement approx. W 3450 x H 1150 x D 2200 mm - Weight approx. 1600 kg
Double-end profiler Schröder Double-sided tenon cutting and slitting machine For window production and frame woodworking Type T2701 Working width max. 4000 mm 3 motors per side: Shortcut saw 3 kW Milling machine 7.5 kW Milling machine 9.2 kW Shortcut saw swivel Saw blade diameter 400 mm Horizontally controlled against 8-fold turret head Milling units controlled horizontally and vertically for holding 2 tool sets each Diameter of the milling shafts 40 mm Clamping length 240 mm, tool diameter up to 400 mm Electric width adjustment Pneumatic clamping of workpieces Eject to the rear Automatic feed 15m/min. Return 30 m/min. Gentle cycle at cutting points 5m/min. Feed motor 0.09/0.85 kW Control cabinet with control With occupational safety barrier Dimensions 5800 mm x 2320 mm x H 2000 mm + Control cabinet 1200 mm x 800 mm H 1600 mm + Barrier depending on ...
Little-used guillotine shears, only occasionally 1.5 mm sheet thickness Stroke rate 56/ min. Power (Rm 400/mm) 3.5mm Rated power 4.0 kVA Weight 860 kg
Offer 25290 Specifications: - Max. working width 3040 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment selectable 6 - 135 ° - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - Upper bolster drive 400 V / 0.37 kW - Bending beam drive 400 V / 0.75 kW - Manual backgauge - Split goat's foot bending splint - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx. 3500 kg
Table milling machine Schröder Table length 2480 mm Extendable table support Milling spindle in the machine diameter 30 mm incl. milling spindle diameter 40 mm with 4 rollers feed wood with mechanical spindle brake by foot lever Weight approx. 800 kg
Key data: 3020 mm, 2 mm
with motor backgauge, numerical NC control, manual bending beam lowering, foot switch Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3020 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 3.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: green Total power requirement: 400 V Dimensions: 3800 x 1000 mm Machine weight: 4500 kg Upper beam stroke: 200 mm without roller scissors/ Opening width: 200 mm
Specifications: - Max. working width 2020 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment pre-selectable 0 - 135 ° - Upper bolster clamping via eccentric lever + foot pedal - Largest opening width / stroke of the upper beam 100 mm - Height adjustability of the lower beam 25 mm - Space requirement approx. W 2950 x H 1200 x D 800 mm - Weight approx. 1450 kg
Key data: 3020 mm, 3 mm
one. Bending cheek presentation, foot pedal Sheet width: 3020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: white/blue Total power requirement: 32 A Upper beam stroke: 200 mm Bending angle: 145 degrees Dimensions: 4300 x 2600 x 1900 mm Machine weight: 3960 kg Machine number: 220478
Offer 24482 Specifications: - Max. working width 1020 mm - Max. material thickness 4.0 mm - Cutting angle 2.4 ° - Single stroke – continuous stroke can be preselected -one. Back gauge up to 700 mm - Front angle stop - Front pull-out sheet metal support - Drive 400 V / 3.4 kW - Space requirement approx. W 1450 x H 1180 x D 1400 mm - Weight approx. 900 kg
Offer 24483 Specifications: - Max. working width 1020 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment selectable 6 - 135 ° - 6-fold bending angle preselection - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - E. footswitch - Upper bolster drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg
Key data: 3000 mm, 3 mm
with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg
Product number: 2829 Type: IMAX620 Serial number: 620.3023.03 Year of construction: 2003 Belt width: walking beam, 620 mm Needles: 2 x 150 pcs, 3 mm Product height: max 200 mm Speed: 15 - 60 cycles/min. Advance: 50 / 100 mm Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 16.5kW Dimensions: 2150 x 1600 x 2350 mm For boneless and bone-in products Including tool trolley Schröder rotating filter Type: DF510 Serial number: 634-11 Year of construction: 2011 Power: 3 x 400V, 50Hz, 0.22kW Dimensions: 1000 x 2650 x 1350 mm Schröder tube heat exchanger Type: RWT Serial number: RWT-5622-13 Dimensions: 400 x 1700 x 500 mm
SCHRÖDER DM-500 ID.NO. 2117 Schröder DM-500 brine mixer with mixer and pusher that goes up and down. Dimensions 135 x 135 cm H 180 cm. Available 4x in stock.
Type: N 50 Number of needles: 50 Diameter of needles: 4,0 mm Max. product width: 350 mm Transportation type: walking beam Product passage height: max 180 mm Brine pressure: 0,5 - 4,0 bar Machine dimensions in mm: Width: 800,0 Length: 1600,0 Height: 1900,0 Power: 8,0 kW , 17 A Voltage: 380 V, 50Hz
Type: IMAX 520 Working with boneless meat Product width: 520 мм Cycles: 15 to 60 per minute Feed: max. 60 mm Product height: 130÷230 mm Number of needles: 200 (2 х 100), 4 мм Brine pressure: 0,5-4,5 bar Machine charging height: 1170 mm Compressed air: 6bar Voltage: 230/400 V, 50/60 Hz Connection: 10,0 kW ; 23 А Rotary brine filter DF 510 Machine dimensions in mm: Length: approx. 2100 Width: approx. 1350 (about 2500 mm with filter) Height: approx. 2300
Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.
Type: : Schröder N 138 Number of needles: 138 Diameter of needles: 4,0 mm Product width: 620 mm Transportation type: walking beam Product passage height: 200 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Length: 220,0 Height: 230,0 Power: 10,0 kW Voltage: 380 V, 50 Hz
Type: SCHRODER N 120 Number of needles: 120 Diameter of needles: 3 mm Product width: 620 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 120,0 Width with filter for brine: 200,0 Length: 220,0 Height: 225,0 Compressed air: 6,0 bar Power: 14,0 kW Voltage: 380 V, 50 Hz
Type: SCHRÖDER N 82 Number of needles: 82 Diameter of needles: 3 mm Product width: 420 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Width with filter for brine: 200,0 Length: 210,0 Height: 200,0 Compressed air: 6bar Power: 9,0 kW, 15А Voltage: 380 V, 50 Hz
sheet width: 2520 mm plate thickness: 2.50 mm ST thickness at Niro-steel: 1.50 mm upper clamping bar adjustment: 160 mm adjustment speed: 100 mm/sec Adjustment folding beam: 80.0 mm Bending speed: ca. 120 Grad/sec compressed air: 6.0 bar work height max.: 869 mm control: POS 2000 voltage: 400 V total power requirement: 7.2 kW weight: 3430 kg Current new price ~ 100.000 euros From a maintenance workshop With very good equipment () Equipment: - CNC electric motor-driven universal swivel bending machine High-precision mechanics with modern control technology For individual and series production Robust high-speed machine with high axis speeds Torsion-free welded construction - Rotatable upper beam / as automatic tool change system With 2x tool stations (sharp and goose foot bending rail) Reduces set-up and idle times Eliminates time-consuming tool changes and adjustments - SCHRÖDE ...
Pickle injector / steaker, make Schröder, type NT 350, year 2001, with plastic link belt, width 600 mm
sheet width: 2530 mm plate thickness: 2.50 mm thickness at Niro-steel: 1.50 mm no. of strokes: 34 Hub/min cutting angle: 1.7 Grad table height: 820 mm distance between columns: 2620 mm Control: konv. engine output: 4.0 kW weight of the machine ca.: 1350 kg. range L-W-H: 3100 x 1980 x 1400 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - manual backgauge, with analog display Adjustable from the rear stepless adjustment over the entire travel range - all-steel blade, double-edged - 1x hold-down bar - 1x long side stop - 2x front support arms - Support/working table with 10 mm spaced grooves - Selector switch for single and continuous stroke - 1x freely movable foot switch - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoT ...
General SKUR0090 LocationBarneveld MakeSchröder & Co (D) Main Features MaterialStainless steel Volume2 Ltr. Motor2.2 KW Specified Features - Miscellaneous mixer Capacity2 l Inletø 25 mm Outletø 25 mm With motor2.2 kW 230 Volt With variable speed drivefrequency controller Miscellaneous mixers Mixercheck Capacity2 l MaterialStainless steel Information Typemanufacturer plate is missing No.30-392 Mounted on wheelscheck With switchgearcheck Floorspace1,3 x 0,4 m Total height1,4 m Weight260 KgButterfly mixersSchröderMixers > Miscellaneous mixers > Butterfly mixersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR0087 MakeSchröder & Co Maschinenfabrik (D) LocationBarneveld TypeVWK 01/60-400 Main Features MaterialStainless steel Motor2.2 KW Surface0.07 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Number of stages:1 Heating surface0.07 M2 Cylinder sizesdia.60x380mm With jacketcheck Inletdia. 25mm Outletdia. 25mm Motor2,2 kW 230 Volt With variable speed drivefrequency controller Information No.110705 Year of construction1989 Mounted on wheelscheck With switchgearcheck Floorspace1,4x0,4 M Total height1,4 M Weight230 KgScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...
General SKU311P700 MakeSchröder&Co Maschinenfabrik (DE) No.23-232 Year of construction1984 Mounted on framecheck Main Features MaterialStainless steel Motor2.2 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchangerCooler Number of stages:1 Cylinder sizes+/- dia.80mm x350mm Max. temperature-20 degr.C. Inletdia.25mm (product), dia.25mm (Glycol) Outletmissing Motor2,2 KW, 220/380 Volt With variable speed drivecheck With variable speed drivecheck Information LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace1,4x0,7 M Total height1,3 M Weight150 KG Technical specs Extra informationcylinder size: dia. 80 mm x 350 mmScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- ...
