2 BIESSE edge gluing machines used machines

AUTOMATIC EDGE BANDER machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner technical data : min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin composition : gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n ...

Code: 0458 Brand: ARTECH BIESSE GROUP Model: SINGLE 89-N - CE Standard Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Technical data: Working height up to 120 mm Edge thickness 0,4 - 3 mm Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Weight kg 350

: 0,4-3 / 10 mm Workingpiece thickness from to: 10 - 60 mm Total length: ca. 5.100 mm mm Feed speed: 18 m/min. total power requirement: 13 kw Weight: ca. 2.000 kg Premilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Spraying device: Ja Buffing unit: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Biesse, Type: Rover C6.50 Edge, Year: 2011, Control: Biesse, Software: Works, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Working range X: 5.255, Working range Y-axis: 1.963, Working range Z: 350, Pendulum processing: yes, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Number of milling spindles: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, Kettenwechsler: 22, Vertical drills-X: 12, Drill vertical Y: 17, Horizontal drills-X: 4, Drill horizontal Y: 2, 2 station allocation: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 9 - 54, Radial arm machine: yes, Waste conveyor belt: yes, Zentralschnierung: yes, Year :2011

Technical description: -Trimming unit -Milling unit -Fine trimming unit -Scraper -Buffing unit

Edge thickness max mm: 3 Workpiece thickness max mm: 60 Total connection kW: 1.1 Weight Kg: 110

Manufacturer: Biesse , Type: Stream B1 S3, Year: 2005, Control: NC 1600, Min-max edge material mm: 20, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 60, Min-max feed m/min: 25, Min.-max. batten magazine mm: 20, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Buffing unit: yes, Year :2005

Dowel drilling and drive-in machine Biesse type F/S Technical data: • Drill head: 21 spindles • Glue guns: 6

SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels

Manufacturer: Biesse, Type: V 31, Year: 2012, Software: Biesse Works, Work piece width min-max mm: 70-900, Work piece length min-max mm: 200-2500, Work piece thickness min-max mm: 10-70, 3 axis control: yes, Number of milling spindles: 1, Tool changer: no, Power kW 1: 4,5, RPM min-max 1: 1000-24000, Vertical drills-X: 5, Drill vertical Y: 5, Horizontal drills-X: 4, Drill horizontal Y: 2, Sawing unit: yes, Number of drill spindles: 16, Lochraster: 32, Year :2012

Manufacturer: Biesse , Type: Skipper 100, Year: 2005, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2005

Manufacturer: Biesse , Type: Skipper 100, Year: 2007, Control: CNI, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2007

Manufacturer: Biesse, Year: 2014, Control: Biesse Works, Work piece width min-max mm: 100 - 1.000, Work piece length min-max mm: 90 - 2.500, Work piece thickness min-max mm: 8 - 60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Drilling heads overall: 2, Number of milling spindles: 2, Milling spindles horizontal: 1, Power kW 1: 3,5, RPM min-max 1: 7.000 - 15.000, Vertical drills-X: 2 x 13, Drill vertical Y: 2 x 5, Horizontal drills-X: 2 x 2, Year :2014

Manufacturer: Biesse, Type: Skipper V31, Year: 2016, Software: Biesse Works, Work piece width min-max mm: 70-900, Work piece length min-max mm: 200-2500 (3200), Work piece thickness min-max mm: 10-70, Working range X: 2500, Working range Y-axis: 900, Number of milling spindles: 1, Power kW 1: 4,5, RPM min-max 1: 18.000, Vertical drills-X: 5, Drill vertical Y: 5, Horizontal drills-X: 4, Drill horizontal Y: 2, Sawing unit: yes, Number of drill spindles: 10+6, Lochraster: 32, Drilling engine kW: 10, Year :2016

Manufacturer: Biesse , Type: Insider FT 2, Year: 2001, Control: Biesse NC 100, Software: Biesseworks, Maschinensteuerung: CNI, Online connection: möglich, Machining stations: 2, Working range X: 3500, Working range Y-axis: 1300, Working range Z: 60, Vertical drilling station from above: 2, Automatic setting up: yes, Drilling supprt from bottom: 4, Milling spindles vertical: 2, Power kW 2: ca.5,5, RPM min-max 2: 24000, Horizontal drills-X: 24, Drill horizontal Y: 8, Continuous flow system: yes, Lochraster: 32, Working range max mm: 60, Machining stations: 2, Year :2001

It is a BIESSE Rover A1232 5-axis horizontal milling machine and a BIESSE Skill 15.36 G FT 3-axis horizontal milling machine.

Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

BIESSE - Multi-spindle drilling machine Model BEAVER Year 1982 Manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm horizontal Drilling motor 2.2 kW Vertical drill motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs. pneumatic answers with kSsi control levers Weight 865 kg L x W X H 280cm x 150cm x 150cm

Working area 2500x900x70 mm Software BIESSEWORKS Machine control PC control Rotation speed max rpm 18000 Number of Horizontal spindles 10 With Grooving spindle

Machine Size 2800 x 1940 x 2000mm Min. Size of machined panel 200 x 35 x 8mm Max. size of machined panel 3200 x 900 x 60mm

Biesse Italy, Rover 22 CNC Machining Center Built in 2001 SN 07498 Workspace 4 axes X-axis 3060 mm Y-axis 1080 mm Z-axis 155 mm 6 consoles with 18 vaccum suction holder 4 pneumatic bakelite rods for lifting the plate Vertical electric spindle 7.5 kW with automatic tool change, ISO 30 cone Automatic tool change 7 positions on the working head Drill head with 20 spindles arranged as follows: 7 vertical in X-axis 7 permeable to Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Groove saw 120mm Safety tread mats 110 m3 / h vacuum pump CE marked Weight 3500 Kg Technical information subject to reservation

I sell a double-sided CNC machining center Biesse Skipper 100 Year of construction 2006. Very productive and fast. Automatic entry table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Configuration per page: Milling head 3.5 kW, 7000-18000 rpm 29+8+2 drill heads 1 groove saw D.150mm direction X Software BiesseWorks. CD included. Condition very good ! Fully functional. Automatic system of central lukrikazion and extraction hoods. Complete with safety barriers, transport elements and CE points. CE certificate and full documentation included Need for repair: 1 pcs. safety carpet

I sell a 4-axis CNC machining center Biesse Rover 24L with truss table Year of construction 2004. Configuration: 4-axis main spindle HSD freshly fully repaired / Water-cooled RS1600 Tool magazine 7 positions ISO30 on the head 1x groove saw X-direction Drill head 14+4+2 drilling spindle Usable work surface 4500x1330mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Combined power 35kW XDNC 2.01 software with operating instructions. Pump Becker 250/300 m3/h. 5,5KW Additional vacuum for stencil work or additional clamping devices. Good condition. Available from stock. Need for repair: handles on the truss table, Rotazion from ISO30 magazine on the head

Processing Manufacturer: Biesse Model: Rover 335 ATC Working range: approx. 3200mm x 950 mm Drilling spindles vertical: 24 pcs. Drilling spindles horizontal: 10 pcs. Milling unit: 7.5 KW

SECOND-HAND WORKING CENTER 4 AXIS BIESSE MOD. 37 XL - working dimension X 6000 - work dimension Y 1850 - work dimension Z 180 - 1 router - power router Kw 12 - C axis interpolating - tool clamping system HSK F63 - tool changing positions 21 - vertical drilling spindles 20 - horizontal drilling spindles X 6 - horizontal drilling spindles Y 2 - pod and rail table - n. 10 consoles - vacuump pump 250 m3/h - ATS - CE RULES (YEAR 2004)