Manufacturer:
(Category: 502)
2014 Conical dewatering press S15-E-EVA-7,5 food grade model. Completely revised. History and documentation available. Elektromotor capacity: 7,5kW.
Machine data: Press force: 3,000kN Roller diameter: 850mm Working width: 400mm Briquette dimension: 38 x 32 x 16mm Briquette volume with 4mm gap: approx. 16cm³ Briquette weight: approx. 38g Throughput capacity: 30,000kg/h Rated speed: 17.9/min Circumferential speed: 0.79m/s
automatic baler Manufacturer: HSM Type: VK 8818 R-FU, 100 t Year of manufacture / delivery date: 12/2012 Operating hours: approx. 13,500 specifications: Press force: 1000 kN Specific pressing pressure: approx. 120 N/cm² Channel format: 1,100 x 750 mm (W x H) Binding: 5-fold horizontal Wire push-through: seen in the direction of pressing on the left side Filling opening: 1,800 x 990 mm Drive power: 2 x 45 kW Control: S7-300 Theoretical throughput: - At 20 kg/m³ bulk density: approx. 12.86 t/h - At 50 kg/m³ bulk density: approx. 32.15 t/h Cycle time: approx. 8.3 sec. Bale dimensions: approx. 750 x 1,100 x length (600-1,200) mm Bale weights: approx. 500 - 750 kg Machine weight: up to approx. 30,000 kg including: - Remote maintenance system - Wire Slot Maze - Press box double-walled with replaceable HARDOX 500 s ...
Tomal flocculant preparation with CE compliance
Specifications Maximum pressure: 100 tons Year of Make: 1995 Pressing force: 82 tons/m² Number of ties: 5 in vertical Channel cross-section: 1100 x 1100 mm Dimensions of the tailgate: 2050 x 1100 mm Power connection: 400 V/ 2 x 55 kW Weight: approx. 36 tons Bale tying: automatic Press capacity under operating conditions: max 1170 m³ / hour Press capacity at idle: max 720 m³ / hour Theoretical throughput: to density 30kg/m³) 22 tons/hour Theoretical throughput: to density 50kg/m³) 28 tons/hour Theoretical throughput: to density 100kg/m³) 42 tons/hour Open hopper allows filling with the conveyor belt Pre-pressing flap Automatic regulation of the channel Automatic binding with wire Choice of the length of the finished bale thanks to the bale counter Compact hydraulic power unit with low noise emissions Press plate stably guided on large rollers ...
The BTS drum press PLC auto is ideal for compressing 30 to 220 litre steel drums, but it can also be used to compress plastic and cardboard drums very easily. In many cases this compressed recyclable material can then even be remarketed. The barrel press is particularly characterized by its reliable and easy operation. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, save significantly on your disposal costs and properly return the material to the recyclable material cycle. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compression: 8:1 Pressing time: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phases) Noise: 68 dB PLC control with automatic pressing cycle 30 litre drip pan with drain tap Pressing punch with mandrels for pi ...
The BTS-MF650 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 650 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 650 kg (material depending) Bale size: 1100 H (var.) x 1500 W x 1100 D mm Machine size: 3217 H x 2100 W x 1524 D mm Machine weight: 1930 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the ...
The BTS-MF550 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 550 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 550 kg (material depending) Bale size: 1200 H (var.) x 1500 W x 800 D mm Machine size: 3217 H x 2115 W x 1200 D mm Machine weight: 1650 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the m ...
The BTS-MF250 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 250 kg. With a crush insert baler is even suitable for crushing individual small and large drums and also other sheet metal containers. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 15 Ton Bale weight: up to 250 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 2900 H x 1759 W x 1185 D mm Machine weight: 985 kg Transport height: 2250 mm Loading aperture: 1200 W x 680 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phas ...
The BTS-MF150 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 150 kg. The baling press impresses with its ease of use, safe operation and its large filling volume, it is ideal for medium material volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 8 Ton Bale weight: up to 150 kg (material depending) Bale size: 1000 H (var.) x 975 W x 800 D mm Machine size: 2630 H x 1560 W x 1030 D mm Machine weight: 780 kg Transport height: 1955 mm Loading aperture: 975 W x 470 H mm Cycle times: 40 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale kicker for easy eject the bal ...
Good day We hereby offer you a used baler from the manufacturer Presona AB, type LP 80 VH1. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Press force main press 78 t Specific pressing force 95 N/cm² Press force pre-press flap 28 t Dimensions of the insertion tray 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW 5-fold vertical bonding Hydraulic oil tank volume 1,000 L Press dimensions built with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Hint: The machine was u ...
Good day We hereby offer you a used baler from the manufacturer Strautmann, type BaleTainer. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer Strautmann Type BaleTainer Year of construction 2013 Operating hours 18,819 hours Number of bales pressed: 7,019 pieces Press force main press 60 t Drive power 9.2 kW Machine weight press 7.38 t The press has been partially overhauled. Piston rods and gasket sets of the two main hydraulic cylinders were renewed and general maintenance work such as oil and filter changes etc. was carried out. Finally, after the overhaul work, the machine was tested. For feeding, the press has a hydraulic tilting device to empty lattice box containers at a truck ramp. For example, the machine can be par ...
Good day We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: HSM Type VK 4812 Year of construction: 2011 Operating hours 20,580 hours Pressing force main press 48 t Drive power 30 kW Machine weight press 12 t The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH
used baler Manufacturer: PAAL Type: LIKON 110/150 Year of construction: May 2004 Specifications: Press weight up to: approx. 36 tons Press force at 275 bar: 150 t Operating pressure max. 320 bar Filling opening: approx. 2,000 x 1,020 mm Channel cross-section: 1,100 x 1,100 mm Drive power: 2 x 75 kW Flow rate: 425 m³/h Binding: 5-fold horizontal Total connected load: 176 kW Rated current: 340 A Pre-fuse (min.) 400 A Operating voltage: 3 x 400 VAC/50 Hz/N/PE Control voltage: 230 VAC / 24 VDC including: - Oil cooling - Low-pressure circuit - Free kicks - Key locking system Transport dimensions: Length: 13,803 mm Width: 2,500 mm Height: 3,164 mm without wire unwinding devices, without binding wire, without feed belt, without a personal protection system, without conveyor belt hopper and withou ...
Fully automatic baler Manufacturer: PAAL Type KONTI 275 D Year of Make: 2000 specifications: Press force: 75 t Drive power: 1 x 45 kW Total connected load: kW __ / 170 A Throughput under operating conditions: 280 m³/h Filling opening: 1,020 x 1,550 mm Bale size:750 x 1,100 mm Binding: 4-fold vertical incl. front printing plate slot cover Machine weight: approx. 25 t Bale weights: up to approx. 600 kg Including: - Free kicks - Large digit display
Specifications Maximum pressure: 85 tons Year of Make: 1994 Pressing force: 103 tons/m² Number of ties: 4 - vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Bale weight: 500-650 kg Weight: 26 tons Power connection: 400 V/ 55 kW Bale tying: automatic
We sell our PPK baler. the main pump and auxiliary pump were replaced this year 2024. Invoices are available. The press only pressed cardboard boxes. It can be demonstrated and put into operation at any time.
Specifications Maximum pressure: 45 tons Year of Make: 2017 Pressing force: 6.9 kg/cm² Number of bindings: 3 Channel cross-section: 900 × 720 × 600 - 1200 mm Dimensions of the tailgate: 820 × 1250 mm Bale weight: 250 - 400 kg Weight: approx. 7 t Power connection: 400 V Bale tying: automatic Theoretical throughput 174 m3/hour Theoretical throughput to density 20 kg/m - 3.48 tons/hour Theoretical flow rate to density 50 kg/m - 8.7 tons/hour If you have any questions, please call us: +48 696 072 985
automatic baler Manufacturer: PAAL Type: KONTI 600 F/k with cross-binding Year of construction 2008 Machine was only in operation for 4 years specifications: Press force: 145 t Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 2 x 75 kW Throughput capacity:approx. 510 m³/h Capacity at 35 kg/m³: 17.5 t/h Capacity at 60 kg/m³: 30.0 t/h Capacity at 100 kg/m³: 47.0 t/h Binding: 5-fold vertical Additional 4-fold automatic horizontal bonding Bale weight: approx. 800 - 1,250 kg depending on baled material and bale length Machine weight: up to approx. 42 t Attached pictures are only sample pictures!
automatic baler Manufacturer: PAAL Type: KONTI 600 F Year of construction 2009 Operating hours: only approx. 22,000 specifications: Pressing force: 150 t at 300 bar Specific pressing force: 124 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 2 x 45 kW Throughput: approx. 375 m³/h Capacity at 35 kg/m³: 13.0 t/h Capacity at 60 kg/m³: 22.5 t/h Capacity at 100 kg/m³: 35.0 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,250 kg depending on baled material and bale length Machine weight: up to approx. 45 t
The BTS-MF60 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 60 kg. With a can crush insert baler is even suitable for crushing individual sheet metal and plastic containers and also cans. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 60 kg (material depending) Bale size: 800 H (var.) x 700 W x 500 D mm Machine size: 1996 H x 1040 W x 720 D mm Machine weight: 260 kg Transport height: 1996 mm Loading aperture: 700 W x 492 H mm Cycle times: 24 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise le ...
The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for easy ...
Vertical baler Dixi 50 S, built in 2020, very good condition Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S PET Year of Make: 2020 Drive power: 7.5 kW Press force: 50 t Press time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Binding: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good, mint condition. The seals on the 2 cylinders for the retaining clamps have been replaced. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are ...
Vertical baler Dixi 50 S, built in 2019 Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S PET Year of Make: 2019 Drive power: 7.5 kW Press force: 50 t Press time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Binding: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an ex ...
Vertical baler Dixi 50 S, built in 2019, very good condition Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S PET Year of Make: 2019 Drive power: 7.5 kW Press force: 50 t Press time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Binding: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with yo ...
Baler Paal Pacomat II with hopper, built in 1979 Specifications: Manufacturer: Paal Type: Pacomat II Year of Make: 1979 Drive power: 11 kW Pressing force: 27 t Channel cross-section: 700 x 1000 mm Filling opening: 1000 x 650 mm Flow rate: approx. 60/115 m³/h Bale size: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5200 kg Materials: paper, cardboard, foil Remarks: The machine is in working condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 ...
used baler Manufacturer: PAAL Type: PACOMAT I-35 Year of Make: 2008 specifications: Press force: 35 t Specific pressing force: 7.14 kg/cm² Drive power: 22 kW Throughput: up to approx. 85 m³/h under operating conditions Channel format: 700 x 700 mm Filling opening: 800 x 620 mm Machine weight: up to approx. 6.5 t (depending on equipment)
used baler Manufacturer: UNOTECH Type: UPAXX 70 Year of Make: 2022 specifications: Press force: 700 kN Specific pressing force: up to 450 N/cm² Channel cross-section (h x w): 350 x 500 mm Filling opening (l x w): 1,250 x 420 mm Main pump drive power: 30 kW Performance under operating conditions: - At 85 kg/m³ bulk density in 1-stroke operation approx. 1.7 t/h - At 85 kg/m³ bulk density in 2-stroke operation approx. 2.5 t/h Package density for tin cans: up to 1,200 kg/m³ Machine weight depending on equipment: 9.5 t Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Machine has slight fire damage and will be completely repaired if the order is placed.
automatic baler Manufacturer: UnoTech Type: UPAMAT 40 H3 Year of Make: 2013 Operating hours: approx. 5,000 specifications: Cutting force: 480 kn at 315 bar Press force: 400 kn at 260 bar Filling opening 1,250 x 920 mm Channel format: 700 x 1,000 mm (H x W) Drive power: 15.0 kW Pump flow rate: 50 Ltr./min. Pump: Double Gear Pump Required oil quantity: 200 Ltr. Oil type: HLP ISO 68 Throughput: - 1.8 t at 20 - 30 kg/m³ bulk density - 3.0 t at 35 - 50 kg/m³ bulk density - 3.5 t at 60 kg/m³ bulk density Bale weight: up to approx. 320 kg Binding: 3-fold horizontal Wire push-through: seen in the direction of pressing on the left side Control: Siemens S7, IM-151 Dimensions: Width approx. 4,202 mm Length approx. 7,185 mm Height approx. 2,060 mm Machine weight: approx. 7,000 kg Noise emission: approx. 82 - 85 dB ...
Specifications Bag dimensions: 1m3 Year of Make: 1999-2000 Weight of the bag: do 500 kg Productivity: 500 kg/h Power connection: 400V/2.2 kW
