We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
used
Max sheetsize 250 x 350 mm Speed of substrates up to 4.000 cycli per hour Speed of numbering up to 15.000 cycli per hour Nr. of heads 2 numbering heads Feeder manual, by hand Delivery a table or jogger is suggested
used
max. exposition size: 70 x 90 cmexposing power: 2,5 kWweight: 189 kgserial no.: 89110195 voltage: 220 Vcurrent: 11 Adispersion foil automaticdrawer cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Buckles Heidelberg Model Ti52 Specifications 1 set of buckles for Heidelberg Stahlfolder Ti52/4, might be suitable for older versions Available direct
used
max. film width: cmmax. speed: /hserial no.: 55C P0009 inlet width: 55 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Plate punch Beil 780 S-H-APL-CTP-p; pneumatically; Punching 780mm Autoplate; puncture 11mm; suitable for MAN 700; compressed air required. Plate punch Beil 780 S-H-APL-CTP-p MAN 700; pneumatic; punch size 780mm autoplate; depht 11mm; used for MAN 700; Need pneumatic air.
used
serial no.: 00701 weight: 150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; ready for use
used
Capacity: 1900 WattTemperature Dryer: 45 °Cvolt: 230 VClunz & Jensen C85 plate cleaning unitOnline versionplate width: 230 - 850 mmPlate length: 300 - 1100 mmPlate thickness: 0.15 - 0.30 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Plate bend Ingkant SM 52; cleaned and tested; Table equipment; suitable for Heidelberg SM 52 plates. Plate bender SM 52; good condition; cleaned and checked; table top model; used for Heidelberg SM 52 plates.
used
Max. size= 42 x 42 cm, Availability= 082023, Plate punch Bacher 425 mmLOT Loaded in truck or container
used
Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.
used
Max. size= 100 x 70 cm, Availability= 032023, Standard EquipmentLOT Loaded in truck or container
used
Ruler with micro adjustment
used
Working width: 2500mm, laying width: 2500mm, speed: 55-60m/min, web weight: 80-500g/m², length: 6350mm, width: 3820mm, height: 1935mm, operational hours: ca. 59,000h.
used
Format 1200 x 750 mm without ruler Working size 120x75cm 220V / 120 Watt / 50.60 cycles (Hz) Dim L130 x W80 x H130 cm
used
Including documentation, paper and software, it might be necessary to adjust the software.
used
Plate max width 650 mm Plate min length 460 mm Weight 150 kg Current 220V 7.5 Amp, 1.5 kW Working Dims W107 x D180 x H106cm Packaging Dims W107 x D100 x H106cm
used
Max. plate size: 460x620mm.
used
Collectors' Item! Vertical Reproduction Camera 220V / 2550W / 50-60cycles (Hz) Dims L130 x W120 x H170 cm - 285 kg
used
Length: 2200mm, width: 1260mm, height: 2280mm, weight: 1.59t, operational hours counter: 66,511h.
used
used X-Rite 528 Spectraldensitometer
used
Reference Num.: 3459Brand: SIS Pa?systemType: 50 x 70 cmAvailable: directlyStatus: In productionLocation: Deutschland
; ready for operation
used
Reference Num.: 3992Brand: HEIGHTSType: Inca 70 Polymer Processor (CTP)Construction year: 2003Available: directlyStatus: Not in productionLocation: EuropaEquipment:- Maximale Plattenbreite: 811 mm (31.9?)- Minimale Plattenl?nge: 254 mm (10.0?)- Dicke der Platte: 0.15 - 0.30mm (0.006 - 0.012?)
used
Pressure plate stacker Grafoteam PST 26; good condition; cleaned and tested; new engine; .max. Panel size 820x780mm, min.324x394mm. Plate stacker Grafoteam PST 26; good condition; cleaned and checked; New Arm Motor; Max.plate size 820x780mm, min.324x394mm.
used
Reference Num.: 3657Brand: BeilType: 780/425-S-H-APConstruction year: 1999Available: directlyStatus: In productionLocation: Deutschland
used
Ref. 444_2 BASF nyloprint Dryer for Nyloprint plates Serial: 263 35 + 80° Functioning
used
Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBGYear 1960 - Serial-No. 16945 Size min.: 210 x 280mm Size max.: 560 x 7700mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.0800kg3Komplett mit Zubehoer und Schliessrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-VideoWe would be very pleased with your visit - more machines on StockAvailable Immediately - Can be inspectOn Stock Emskirchen / Nuernberg - Can be test
used
Ref. 443 Light table Mega steel Type 399-3 Fabr. - Order No.: 93-674 Year of construction 1993 Table size: 70 x 100 cm Table top diagonally adjustable Height infinitely adjustable motorized from 85 to 115 cm Light source: 2 fluorescent tubes
used
Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-foermige Loecher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat ...