Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
Caterpillar C2.2 - Unused - 20 kW - JAW
: 30000 kglength: 9000 mmwidth: 2500 mmheight: 810 mm: lenkbar : lenkbar size of tyres: 410 x 250 / 8-fach weight of the machine ca.: 4,3 tdimensions: 11,5 x 2,5 x 0,81 mHeavy duty trailer with- Double turntable steering- small turning circle- Tilt-proof due to steering lock limitation- Reversible drawbar, Length 1320mm- good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30000 kglength: 9000 mmwidth: 2500 mmheight: 810 mm: lenkbar : lenkbar size of tyres: 410 x 250 / 8-fach weight of the machine ca.: 4,3 tdimensions: 11,5 x 2,5 x 0,81 mHeavy duty trailer with- Double turntable steering- small turning circle- Tilt-proof due to steering lock limitation- Reversible drawbar, Length 1320mm- good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Voltage: 380V, frequency: 50Hz, 3 phases, equipment: rotary indexing table, filling station with powder hopper, pressing station with hydraulic pressing unit, conveyor belt, control panel with Run/Ram/Index functions, main switch, HMI/display PP-006, Mitsubishi PLC FX2N-32MR, expansion module FX2N-4DA, Mitsubishi operator panel F940GOT-SWD-E, hydraulic power unit with electric motor, pneumatic and hydraulic lines, safety enclosure, emergency stop, 400V/CEE connection and CE marking. An on-site inspection is possible.
Two identical Volvo L180D wheel loaders available, operating hours: approx. 30,000h, weight: 32.7t, engine type: Volvo TD 122 KHE, rated speed: 2100rpm, power SAE J1995 (gross): 209kW (284HP), power ISO 9249/SAE J1349 (net): 206kW (280HP), max. torque: at 900rpm, torque SAE J1995 (gross): 1580Nm, torque ISO 9249/SAE J1349 (net): 1580Nm, displacement: 12l, onboard voltage: 24V, batteries: 2x 12V, battery capacity: 2x 140Ah, cold cranking current per battery: 1050A, reserve capacity per battery: 290min, alternator: 1680W/60A, starter power: 6.6kW (9HP), operating weight: 26-29t. Equipment: engine: high-performance low-emission diesel engine, 6-cylinder inline design, direct injection, turbocharger, charge air cooling, 4-stroke, replaceable cylinder liners, air filtration system: three-stage, cooling system: hydrostatically driven fan with separate cooling circuit for the charge air cooler, ...
Control cabinet as shown, complete, not cannibalized. Attachment BvL continuous scrubber, see nameplate. Mainly with Siemens Sirius power contactors with Siemens control system, control cabinet cooler, control panel, frequency converter. Dimensions approx. 2.5m x 2m. Only self-collection, loading facilities available.
Working width: 650-1305mm, exception PET/ALU/PE and ALU/PE: max. 1100mm, production speed: 120-220m/min, max. operating speed: 300m/min, max. primary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, adhesive application 2K for film/film: approx. 1.5-2.5g/m², 1K for paper/film: approx. 2.5-4g/m², max. secondary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, max. rewinding roll diameter: 1200mm, core inner diameter cardboard core: 152mm, steel core: 150mm, processable materials, min. polyester film: 10µm, min. aluminum foil: 6.6µm, min. PE film primary unwinder: 40µm, min. PE film secondary unwinder: 30µm, max. paper: 150g/m², length: 8625mm, complete documentation vorhanden. An on-site inspection is possible.
Number of axes: 6, repeatability: +/-0.08mm, mechanical unit weight: 145kg, max. wrist payload: 3kg, max. reach: 1437mm, axis working range: A1: 360°, A2: 250°, A3: 455°, A4: 380°, A5: 280°, A6: 720°, axis speed: A1: 225°/s, A2: 215°/s, A3: 225°/s, A4: 425°/s, A5: 425°/s, A6: 625°/s, inertia: A4: 8.9Nm/0.28kgm², A5: 8.9Nm/0.28kgm², A6: 3Nm/0.035kgm², installation dimensions: 283x283mm, control unit weight: 40kg, with control system. An on-site inspection is possible.
Cleaning machine used Visually and mechanically good condition Fully functional Without warranty _ Purchased as seen Video in operation can be sent on request. Payment of the machine at pick-up or in advance by bank transfer Invoice Amount plus VAT
CHEAP EQUIPMENT, rock botton prices for owners retirement, send your enquiry for photos, consult PDF file for clear vision, availability: imediate
Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement.
PREZ-MET PVC and aluminium window production line is a state-of-the-art and comprehensive solution for the mass production of windows. The system enables complete machining of PVC and aluminium profiles within a single working cycle. The production includes all key stages – from precise profile cutting, through milling, drilling, welding to final cleaning of the elements. The PREZ MET window production center is made up of three smaller integrated production lines – one line for the production of window frames and two lines for the production of window sashes. They consist of machines from renowned manufacturers from 2005-2016: – ROTOX ZSA 263 cutting center – PREZ-MET FS 50 end milling machine – PREZ-MET 42 MP copy milling machine – PREZ-MET ZGP 420 four-head welding machine (3 pcs) – PREZ-MET ZGP 380E two-head welding machine (2 pcs) – PREZ-MET ZG 940 single-he ...
