Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
Heating cabinet Manufacturer: Memmert U 10 Type: U 10 Features / technical data: Usable dimensions: approx. (BTH=38 x 24 x 26 cm) External dimensions: approx. (BTH=51 x 40 x 55 cm) Usable capacity approx. 26 litres 1400 watts Regulation 5°C μg to 220°C Aluminum interior with two shelves
Incubator/incubator Manufacturer: Binder Nominal temperature up to 100 °C
Lifting device for 200-litre containers Manufacturer: Carnitech Type L 125 Dimensions 1300 x 1500 x 4050 mm Power 3 x 400 V, 50 Hz, 0.75 kW With slide for liquid products
Tube heaters Manufacturer: Ahrens & Bode Pressure-resistant up to 25 bar
Trotec Speedy 360 – CO₂ laser with brand new laser tube, fully serviced Investing instead of repairing – this Trotec Speedy 360 is immediately ready for use and convinces with its exceptionally well-maintained condition and a newly installed laser tube. For sale is a Trotec Speedy 360 CO₂ laser engraving and cutting system, which has been used exclusively in professional operation and has always been treated with care. The machine is in very good condition, both technically and visually, and is immediately available for productive use. A new laser tube was installed before the sale. This not only gives you a proven industrial laser, but also benefits from one of the most valuable wear parts in mint condition. This significantly reduces the investment risk and enables a direct start of production without additional follow-up costs. Proven Trotec quality The Speedy 3 ...
Volume Flow: 22-56 cbm/h Throughput: 39-99 t/h wet
Tiger aluminium cross beam with 4 swivel load hooks, adjustable Aluminium cross beam ATV-Q with 4 swivel load hooks, adjustable - The lightweight H-beam made of aluminium Load capacity: 3,000 [kg] - Type ATV-Q-3-3x3, brand Tiger hoists The truss was used only a little and a maximum of 500kg was lifted with it. Signs of use only very minimal. See photos. Purchased in June 2024. The new price is €6,100.00 plus 19% VAT and freight costs (approx. €380) Sale, because no longer needed. If you have any questions, please contact us. Description according to the manufacturer: Aluminium cross beam with 4 swivel load hooks - H-beams made of aluminium Product Features Type: ATV-Q-3-3x3 Payload: 3,000 [kg] Hook spacing: 420-3,000 [mm] Hook spacing cross section: 400-3,000 [mm] Aluminium load beam for crane operation Lightweight crane beam in H-design made of aluminiu ...
Control: Windows XPprint area: 550x500 mmStencil PrinterStencil format: 737 x 737 mmPCB thickness: 6 mmSqueegee speed: 10-80 mm/sSqueegee pressure: 0-260 NThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 1600 kgDrive: Diesel motor: Deutz weight: 13,6 tOptionally, spare parts can be purchased.No.: Zch5FZMachine number 16087001The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: 6 workpiece weight: . kgthroat: . mmControl: System R-J Number of working hours: 38217 htotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mType A05B 1804_B 212The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 2 tstroke: 4000 mmclamping width: 9200 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHoist Demag Bridge traveling craneThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1500 mmy-travel: 800 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 2,66 x 1,60 x 3,10 mCNC-controlled Coordinate Measuring Machine for fully automaticmeasuring of workpieces. Incl. Measuring Software MDM Metrosoft Level 2 for measuring of:- Points, surfaces, circles, cylinders, cones, distances and angles.- SPC software for statistic evaluation of the measurementsMachine not operational!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 tstroke: . mmclamping width: 18000 mmHeight: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m32Overhead travelling craneThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 tstroke: 7000 mmclamping width: 17508 mmHeight: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m68Overhead travelling craneDemag hoistTest log available.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 2 tstroke: 5000 mmclamping width: 5000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mSide crane with 6 meter projectionLength rail system approx: 60 metersThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 2 tstroke: . mmclamping width: 5600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m43 ONLY BRIDGEIN LIFTING GEARThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 tstroke: 7000 mmclamping width: 10000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m38 Hubwerk DemagInspection book available.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 tstroke: 7000 mmclamping width: 10000 mmtotal power requirement: kWweight of the machine ca.: 3220 kgdimensions of the machine ca.: m41Factory No. 18/703395Test log available.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cleaning tank, ultrasonic cleaning basin, ultrasonic cleaner, ultrasonic bath -Manufacturer: Zender, stainless steel ultrasonic cleaning tank with heater, mobile -Basin internal dimensions: 2200/315/H280 mm -Temperature control range: 30 to 110°C -Operating temperature: max. 70°C -Ultrasonic generator: Zhangjiagang Zhongnuo type JYD -Individual components: see photos -Dimensions: 2530/315/H700 mm -Weight: 150 kg
: x : x : x dismantled: x Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 5000 kgheight: 500 mmwidth: 1200 mm: nein : 1200 x 100 mm: 1,2 x 0,53 x 0,5 m Support stand, assembly stand, steel stand, welding table, assembly table,steel trestle, work trestle - Our jack stands are characterized by their stable construction, highload-stable stability and indestructible service life.- powder-coated in RAL 5010 gentian blue- Transport on request- CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 15000 kgheight: 790 - 1350 mmwidth: 1400 mm: ja : 790 - 1350 mm: 120 x 1400 mm Support stand, assembly stand, steel stand, welding table, assembly table,steel trestle, work trestle - Our jack stands are characterized by their stable construction, highload-stable stability and indestructible service life.- powder-coated in RAL 5010 gentian blue- CE marking- Transport on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 15000 kgheight: 790 - 1350 mmwidth: 2000 mm: ja : 120 x 2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 15000 kgheight: 790 - 1150 mmwidth: 1200 mm: ja : 790 - 1150 mm: 120 x 1200 mm Support stand, assembly stand, steel stand, welding table, assembly table,steel trestle, work trestle - Our jack stands are characterized by their stable construction, highload-stable stability and indestructible service life.- powder-coated in RAL 5010 gentian blue- CE marking- Transport on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
