Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
CONTROLS electronic controls ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzLike-new (1-year-old) high-pressure pump 69 bar
A CNC-controlled 3D multisensor coordinate measuring machine by Dr. Schneider is available. Design: bridge type, measuring dimensions X/Y/Z: 400mm/400mm/300mm, axis resolution: 0.0001mm, max. traverse speed: 100mm/s, max. acceleration: 4m/s², optical length measurement error: 2+L/300µm, volumetric length measurement error: 2.8+L/300µm, probe head: Renishaw PH10M, touch probe: Renishaw TP200, probe interface: Renishaw PI200. Machine dimensions X/Y/Z: approx. 1200mm/1200mm/2100mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.
A stationary Brabender residual moisture and moisture content measuring device is offered. Relative measuring range: 0.0001%H₂O-15%H₂O, absolute measuring range: 0.01mgH₂O-15mgH₂O, moisture content resolution: 0.01mg, resolution: 1ppm, relative resolution: 0.0001%H₂O, measuring temperature range: 30°C-160°C, temperature setting: in 1°C increments, sample weight: approx. 0.05g-20g, max. sample volume: approx. 50cm³, accuracy: better than approx. 0.6mg, ambient temperature: +10°C to +45°C, relative humidity: 5%-95%, storage temperature: -20°C to +55°C, relative humidity: 5%-95%, measuring distance: approx. 1m, measuring height: approx. 1.6m. Dimensions X/Y/Z: 562mm/420mm/275mm, weight: 27.6kg. Documentation available. Inspection possible by appointment.
Stainless steel batch mixer with a gross volume of 600 l. (max. usable filling: approx. 400 l.). Centrifugal unit equipped with ploughshares, drive via motor, starting clutch and intermediate gearbox, outlet flap pneumatically operated. Equipped with 2 flanges for mounting cutter heads/choppers. In very good condition of wear, bead-blasted and repainted.
Intensive batch mixer with a usable filling per batch of 1,125 l. / 1,800 kg (max.), emptying via central bottom flap (hydraulically operated), tools: star agitator and wall-to-floor scraper. Agitator drive: 37.0 kW via gear motor, drum drive: 13.5 kW via 3-track friction wheel, hydraulic unit: 3.0 kW for lock operation, central lubrication: via pump with 0.18 kW.
Max. load capacity: approx. 18t, drive configuration: 4x2, drive type: rear-wheel drive, emission standard: Euro 4, engine displacement: 6871cm³, engine power: 240kW, max. torque: approx. 1250Nm, suspension: leaf suspension at the front, air suspension at the rear, including loading crane. An on-site inspection is possible.
2M S/S TANK (AUTOMATED DOSING) - SILO TANK Quantity- 8 units If interested, kindly contact Farha (nurfarha_atopglove.com.my) or Ms Fatimah (fatimah_asmadtopglove.com.my) Located at F20BC
A planer cutting machine in need of repair is offered. Cutting width: 1150mm, insertion depth: 1150mm, max. stack height: 165mm, max. cutting height: 165mm, table height: approx. 900mm, max. back gauge speed: approx. 300mm/s, back gauge positioning accuracy: 0.01mm. Smallest cut without false plate: approx. 25mm, smallest cut with false plate: approx. 90mm, clamping pressure range: approx. 150daN-4500daN, safety clamping pressure: 30daN, max. knife strokes: approx. 45strokes/min. Machine dimensions X/Y/Z: approx. 2600mm/2500mm/1650mm, weight: approx. 3200kg. The measuring system is defective. Inspection by appointment possible.
A 5-axis dental CNC milling and grinding machine from imes-icore is offered. A-axis: 360°, B-axis: 115°, axis inclination with 98mm blank: A-axis/B-axis: 30°/25°, max. machining area: 94mm/30mm, blank holder: 98.5mm, workpiece holder: 1 blank, max. spindle speed: 60000rpm, spindle power: 1.0kW, tool holder: 6mm shank, tool changer: 20, tool length measurement: ≤0.002mm, control system: Logosol 5-axis. Machine dimensions X/Y/Z: approx. 758mm/790mm/857mm, weight: approx. 180kg. Inspection by appointment possible.
Stainless steel sieve insert for ultrasonic fine screening, mesh size: 0.036 mm, wire thickness: 0.028 mm, material(s): VA 1.4301 / 1.4401. Suitable for VTS 950 screening machines, among others.
Stainless steel sieve insert for ultrasonic fine screening, mesh size: 0.032 mm, wire gauge: 0.025 mm, material(s): VA 1.4301 / 1.4401. Suitable for VTS 950 screening machines, among others.
1-deck stainless steel vibratory tumbler screen with a screening area of 0.7 m² and a screen diameter of 950 mm. Incl. 1 piece sieve insert (without covering), incl. base frame and drive: 1.1 kW, 230/400 volts, 1,300 rpm. Suitable for dry screening of almost all bulk materials in the fine, medium and coarse grain range as well as for wet screening.
Rotary transfer system with 8 processing stations for laser welding of sleeves, inventory no. 94012, with Trumpf laser unit, Trulaser HL 506 D, plus cooling unit for laser, welding dust extraction
A vapor phase soldering system IBL is offered for processing SMT printed circuit boards and electronic assemblies. Soldering format X/Y: approx. 530mm/330mm, max. printed circuit board format: 540mm/307mm/50mm, medium filling: approx. 15kg, water connection: 1/2 inch, min./max. water pressure: approx. 2.5bar/4bar. Dimensions: approx. 1190mm/1760mm/1320mm, weight: approx. 500kg. Inspection by appointment possible.
Fiber Laser Laser Marking Machine Trotec SpeedMarker 700 SM0700 02M F254 MOPA 20 W Year of construction 06/2022 Condition: used, very good, function-tested The SpeedMarker 700 laser marking machine produces high-quality marking on a wide range of materials in a compact footprint. It is equipped with a high-speed galvo head and enables ultra-fast and precise laser marking. The machine has a MOPA laser with adjustable pulse duration for high-contrast markings on metals and plastics, ideal for colored marking and delicate surfaces. Technical data - High-speed galvo head - Maximum marking area: 580 x 310 mm - Maximum workpiece height: 482 mm - Laser type: Yb 20W Mopa 1064nm - Laser class: 2 - Lifting door with high opening - Lens set F=254 mm - Power supply: 230 V, 800 W incl. SpeedMark laser software, machine documents incl. extraction Aigner Atmos Nano HEPA 230 wi ...
Vibratory feeder Manufacturer: Fimotec-Fischer Type VZ-40-SZ consisting of: Vibratory feeder with sheet steel cylinder vibrating shells Bunker feeding system Control mounted on a work table very good condition Documents: Nameplate
A Hegla glass cutting system will be available approximately from December 2026. Direction of travel: right-left, connected load: 35kW, max. glass sheet dimensions X/Y: 4600mm/3210mm, max. single glass thickness: 16mm, machine dimensions X/Y/Z: approx. 13200mm/6000mm/1000mm. The stops are worn. Documentation available. An on-site inspection is possible.
Extraction system for removing dust from the ambient air. The motor drives a fan impeller, creating negative pressure. The air is sucked into the machine via the intake manifold and reaches the filter elements. The treated air is then blown out again., Additional title: Workshop dust extraction, Nominal flow rate: 1400 m³/h minimum flow rate: 1,108 m³/h, Power: 2.2 kW, Current: 5 A, Voltage: 400 V, Frequency: 50 Hz, Base construction: on a mobile frame, Features: 140 mm intake manifold; air filter (category C el. lt.); asynchronous motor (manufacturer EMGR)
Malt scale with digital display, Additional title: Continuous flow scale with digital display, Fill sizes: 24 l, Capacity: 300 fills/h, Nominal capacity: 7 m³/h, Voltage: 240 V, Frequency: 50/60 Hz, Compressed air: 5 - 6 bar, Weight: 130 kg
Additional title: Control cabinet with touch panel, Voltage: 110-240 V AC, Frequency: 50-60 Hz, Length: 500 mm, Width: 580 mm, Height: 210 mm, Weight: 35 kg, Operation / Control: touchpanel
A crate washer for cleaning the outside of bottle crates using spray nozzles., Material: stainless steel, Base construction: on feet
