235 results

item-No.: 126991141
-
1.900 €
-
Height 4 m, RADIUS 3 m Chain hoist with creep hoist 2000.
item-No.: 126942675
weight max.: 3,2 tclamping width: 19672 mmdiameter of running wheel: 160 mmtotal power requirement: kWweight of the machine ca.: 4,46 tThis ad was created with MODUL MWS - the software solution of LogoTech.
item-No.: 126991138
-
800 €
-
BJ. 06/2013 Hook path 4 m, load capacity 0.5 t Stroke 4.5/1.1 m / min probably never in use - optically like new
item-No.: 126476558
arm length: 8000 mmtotal column height: 4800 /3800 mmweight max. in kg: 2000 kgheight of stroke: 3800 mmflange diameter: 1350 mmFoundation flanges Ø: approx 1350 mmIncluding pull-wireMotoric quarter turnMotoric movement of the pull-wire at the pivot armAdditional informationThe column is reduced by remove the middle piece (1000 mm). Then it will be reduced on a total height of approx 3800 mm.The screwed flange can be easily changed or removed!This ad was created with MODUL MWS - the software solution of LogoTech.
item-No.: 126991136
-
3.800 €
-
Lifting capacity 2000 kg, Hubhohe 4140 mm, throat depth 3000 mm, Abus chain hoist HPS 2000.5 2F, speed 1.25/5 m / min very strange, complete crane documents used in highway maintenance depot,
item-No.: 125962543
capacity 1000 kgweight 225 kg
item-No.: 126991134
-
1.750 €
-
Capacity 500 kg, inside width 1.9 m, Hakenhohe - floor 2 m Total high 2.85 m, chain hoist GM 2 500 3-2 2/1 Lifting speed 3 m / min, complete Unerlagen
item-No.: 125799982
1 used electric-hoist DEMAG DKUN 5-500 new in 2000 capacity: 1000 kg / 1 tolifting-height: 3 mlifting-speed: 4 m/minMotor: 400 V / 0.75 kW
item-No.: 126991132
-
2.400 €
-
Capacity 500 kg Throat depth 300 kg Column diameter 273 mm, size UK boom 3300 mm Trolley GM2500 E 2 / HF 6, hook path flange width of 3000 mm, 120 mm,. Speed 1-4 m/min, Gesamthohe 3600 mm, complete documentation of the crane, Prufbuch, etc. as good as new. State
item-No.: 125751673
item-No.: 126869343
Technical data: -E. chain hoist PFAFF BJ. 2004 -Operation via Hall Remote button -Load capacity of 125 kg -Hoisting speeds 1.5 / 8 m / min -RADIUS 2700 mm -Hook height approx. 2300 mm -Bottom bracket approx. 2700 mm -Total height approx. 4250 mm -Column diameter approx. 215 mm -Foot plates dimensions of the column of 720 x 720 mm -Slewing RADIUS 270 ° -Drive 400 V - total weight approx. 400 kg
item-No.: 125442579
1 used electric hoist Yale like new capacity: 500 kglifting-height: appr. 6 m with trolley
item-No.: 126869331
Technical data: -E. chain hoist PFAFF BJ. 2004 -Operation via Hall Remote button -Load capacity of 125 kg -Hoisting speeds 1.5 / 8 m / min -RADIUS 2700 mm -Hook height approx. 2300 mm -Bottom bracket approx. 2700 mm -Total height approx. 4250 mm -Column diameter approx. 215 mm -Foot plates dimensions of the column of 720 x 720 mm -Slewing RADIUS 270 ° -Drive 400 V - total weight approx. 400 kg
item-No.: 125442842
item-No.: 126869320
Technical data: -Load capacity hoist E. chain hoist make steel 5000 kg - lifting speeds approx. 1.00 / 4 m / min -Katz speeds approx. 20 / 5 m / min -Slewing speed approx. 0.53 / 0.27 m / min -RADIUS approx. 5000 mm -Height approx. 2600 mm -Bottom bracket approx. 3300 mm -Total height approx. 3970 mm -Column diameter approx. 1000 mm -Slewing RADIUS 360 ° -Drive 400 V - total weight approx. 3500 kg -Test book
item-No.: 125442648
Pilar jib cranecapacity: 500 kgarm-length: 3.5 mheight: appr. 3 mwith electric hoist Demag DKUN2-250 (new in 1994)lifting-speeds: 4 and 1 m/min.0.4/0.1 kW
item-No.: 126869284
Aumund Portal crane Weight: 16,000 kg Wingspan: 20 m Lifting height: 12 m capacity: 8000 kg -without a test book -Crane runway length 80 m -Hoist type SH 6040-12-2/1
item-No.: 126869266
Aumund Portal crane Weight: 19,000 kg Wingspan: 24 m Lifting height: 8 m Capacity: 8000 kg -without a test book -Crane runway length 94 m - hoist type DH 1040 H16 4/2
item-No.: 126869203
Aumund Portal crane Weight: 33,000 kg Wingspan: 40.45 m Lifting height: 12 m Capacity: 5000 kg -without a test book -Crane runway length 80 m -Hoist type DH 525 H12 2/1
item-No.: 126853978
Pillar jib crane with vacuum lifting device make of Abus / lard Abus pillar jib crane type LS 200, built in 1998 Capacity 1000 kg lifting speed 4 m / min. Ausladunge 4000 mm height suspension hook 2500 mm total height 3750 mm Vukuumhebegerät lard VacuMaster type SD4N/SS61 VNMULTI 400 / 300-90 ° 2 Built in 1999 Capacity 400 kg rubber dimensions 2 pieces approx. 570 mm x 900 mm renewal of ties in 2017 exam annually, last test certificate by 2018
item-No.: 125442738
item-No.: 126762971
Technical data: -Capacity 10 t - Coilauflage single slope height approx. 1150 mm -Record length of the mandrel approx. 1150 mm -Wedge-shaped mandrel 170-310 mm -Total height 1600 mm - space requirement approx. L 1500 x H 1600 X 600 mm -Weight approx. 960 kg
item-No.: 125442741
item-No.: 126664390
Technical data: -Load capacity hoist 3200 kg -Hoisting speed approx. 0.8 / 5.0 m / min - operation of the hoist user manual remote keys -mot. Proceedings of the hoist / longitudinal + cross chassis -Hook path about 6000 mm -Crane girder HEB 300 -Track width approx. 9500 mm -Wheelbase 1500 mm -Driving beam length approx. 1800 mm -Working beams width 130 mm -Weight 1000 kg
item-No.: 125366653
weight max.: 4,5 tstroke: 1,35 mmtotal power requirement: manuell kWweight of the machine ca.: 35 ca. kg.This ad was created with MODUL MWS - the software solution of LogoTech.
item-No.: 126664385
^ Technical data: -Lifting capacity 1600 kg -Gauge up to variably approx. 5000 mm -Hook height approx. 2200 mm -Crane runway length approx. 5000 mm -Height approx. 4000 mm - 2 lifting speeds approx. -Operation of chain hoist with hand remote switch -MOT. Proceedings of the hoist + cross travel + longitudinal travel -4 pieces of square tube steel columns -2 crane girder 1 left + 1 right ever approx. 5000 mm -Crane bridge approx. 5000 mm -Approximate weight of ...
item-No.: 124946212
weight max.:12,5 tstroke:5/0,8 m/minclamping width:13.600 mmtotal power requirement:400 Vweight of the machine ca.:10 ttravel of hook:5,8 mcrane running gear:40/ 10 m/ mincrane running gear:20 / 5 m/ min
item-No.: 126650769
Technical data: -Capacity 5000 kg -TO - SWF wire - gauge approximately 8750 mm -Operation via hand remote switch - mechanism Group 2 m -Hacking way 5000 mm -Wheel diameter 160 mm -needed track rail B 50 x H 30 mm -Wheelbase 1800 mm -Passage height from crane rail approx. 300 mm -Reeving 4 / 1 -Speed approx. -Trolley gear approx. 5 m / min + 20 m / min -Hoist around 5 m / min + 0.8 m / min -Crane chassis approx. 10 m / min + 40 m / min -Crane weight - approx.  ...
item-No.: 123880377
weight max.: 2,0 tBeam size: 0 mmweight of the machine ca.: 16 kg.This ad was created with MODUL MWS - the software solution of LogoTech.
item-No.: 126607540
Crane Demag Operating voltage: 500 Dimensions: 100 x 120 x 100 (D x W x H in cm) Weight: approx. 500 kg --> free for sale from 01.01.2018
item-No.: 123880379
weight max.: 2,0 tBeam size: 100 - 150 mmweight of the machine ca.: 16 kg.This ad was created with MODUL MWS - the software solution of LogoTech.
item-No.: 126607354
Bridge crane 10 t Demag -Lifting capacity 10 t -Wingspan approx. 25 m Weight: 16,000 kg free--> for sale at the 01.01.2019
item-No.: 123880381
weight max.: 1,0 tBeam size: 0 mmweight of the machine ca.: 13 kg.This ad was created with MODUL MWS - the software solution of LogoTech.
item-No.: 126532551
Wall jib crane DC-COM de Mag 2-250 1/1 H4 V6/1.5 -Rpm 695 / 2880 -Hook path 4.0 m Operating voltage: 400 Dimensions: 300 x 60 x 50 mm (D x W x 50 cm) Weight: 250 kg
item-No.: 123880383
weight max.: 300 kgBeam size: 60 - 80 mmweight of the machine ca.: 7,0 kg.This ad was created with MODUL MWS - the software solution of LogoTech.
item-No.: 126530962
Wall jib crane DC-COM de Mag 2-250 1/1 H4 V6/1.5 -Rpm 695 / 2880 -Hook path 4.0 m operating voltage: 400 Dimensions: 300 x 60 x 50 (D x W x H in cm) Weight: 250 kg --> free for sale from 01.01.2019
item-No.: 123880385
weight max.: 300 kgBeam size: 60 - 80 mmweight of the machine ca.: 7,0 kg.This ad was created with MODUL MWS - the software solution of LogoTech.
item-No.: 126508394
Demag Crane 5 t - load of 5,000 kg -Wingspan approx. 25 m Dimensions: 300 x 2500 x 200 (D x W x H in cm) Weight: 8500 kg
item-No.: 123880399
weight max.: 2,0 tBeam size: 0 mmweight of the machine ca.: 13 kg.This ad was created with MODUL MWS - the software solution of LogoTech.
item-No.: 126493909
Crane - walking crane De MAG D-MOS360 Operating voltage: 400 Dimensions: 100 x 350 x 330 (D x W x H in cm) Weight: 950 kg
item-No.: 126493903
Crane - walking crane De MAG D-MOS360 Operating voltage: 400 Dimensions: 100 x 400 x 330 (D x W x H in cm) Weight: approx. 950 --> free for sale from 01.10.18
item-No.: 126441355
Pillar jib crane Dimensions: 80 x 400 x 400 (D x W x H in cm) Weight: 3000 kg
item-No.: 126441349
item-No.: 126374064
-
99.900 €
-
Paolo De Nicola PDN MOBILIFT TE/60 STRADDLE CARRIER year 2009 60 tons capacity with booklets
item-No.: 126219767
-Year of production 1994 -very good used condition -Manufacturer: ABUS -Type: GM 3100 H6 - 201.41.064 E -Wingspan: 13.20 m -Track width: 28 cm -Hook path: 6 m -Rope diameter: 11 mm Reeving: 4/1 -Mind. tensile strength: 124,6 KN Price incl. dismantling and loading.
item-No.: 126192410
Technical data: -E. chain hoist you, operation via Hall Remote button -Load capacity 2500 kg -Hoisting speeds 1,1 / 4.4 m / min -mot. Trolley gear -Throat depth 2600 mm -Hook height approx. 2200 mm -Bottom bracket approx. 3530 mm -Height approx. 3200 mm -Slewing RADIUS 360 ° -Drive 400 V - total weight approx. 800 kg
item-No.: 126154460
-
450 €
-
Ladies & gentlemen, We two used chains offer lift of the company GIS here. Year of construction: 1997 & 2000 The data, please refer to the nameplate. The price is for both articles 450,-euro + VAT If you are interested, please to contact us. Regards sincerely / child Dietmar Somberg Equipment sales SEICO vehicle GmbH Dominic route 64 d 27356 Rotenburg (Wümme) FON + 49 4261-669-0
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)