cranes used for sale (193)

Two pieces of lifting watches for use with indoor cranes without weight indication of the load

Payload: 1,300 kg Max. vacuum lifter: 4,000 x 2,000 mm Number of suction cups: 19 pcs. Dimensions LxWxH: 480 x 200 x 250 cm Weight: 1,400 kg

Single-girder overhead crane Manufacturer: Demag Lifting capacity 8to Average track approx. 19.5m Lifting height min 6m With built-in crane scale / lifting weighing device. Hoist runs on the side of the beam so that the crane hook can be lifted to the lower edge of the beam. Crane system has already been dismantled. Optionally with approx. 2 x 50m crane rails.

The KBK crane kit is a modular system of components that can be used to Overhead conveyor and suspension crane systems in the load capacity range up to max. 3200 kg (KBK-Aluline max. 2000 kg) erected . Almost any transport task can be carried out thanks to the large number of standardised components be realized. The spectrum of possible solutions ranges from simple hand-moved workstation cranes to material flow systems that are fully equipped with drives and fully automatic controls. Thereby it doesn't matter whether loads are moved within a surface or along a specific production line should. GENERAL TECHNICAL DATA FOR THE ENTIRE SYSTEM: statically designed according to DIN15018, H1, B3 Type of current three-phase current Operating voltage 400 V Frequency 50 Hz Power Connection Switch Type DT 25A-S Total weight of the system, approx. 661 kg Intended location in the hall ...

Jib Crane, Column-Mounted Crane, Column Jib Crane, Crane 250 kg, Used Machine Manufacturer: Abus Load Capacity: 250 kg Column Height: 2900 mm Reach: 2600 mm Hoist: Demag, Chain Hoist Type: DKUN 2-250 K V2 Load Capacity: 250 kg Lifting Height: 2600 mm IP Rating: IP 55

Tiger Sick Hook Traverse TA-SN-SZV-25-36 Load Capacity 2500Kg - For information see pictures -On hand

5t load capacity, track width 14,200 mm. Well preserved. Without warranty. Crane can be loaded on open truck freely.

Offer 22111 Specifications: - Hoist HADEF type CH 2 Bj.07, load capacity 500 kg - Portal load capacity 500 kg - Hook height approx. 2450 mm - 2 lifting speeds 8.0 + 2.0 m/min - Manual trolley suspension - Passage between the driving stations approx. 2750 mm - Passage height lower edge of portal girders approx. 2900 mm - Travel beam approx. 1500 mm - 4 swivel castors - Total width approx. 3050 mm - Total depth approx. 1500 mm - Total height approx. 3050 mm - Drive 400 V - Total weight – crane + hoist approx. 250 kg

incl. reel chassis HFW 1 and electric chain hoist EKZT 10-2

arm length: 2-3 mtotal column height: 4,3 mweight max. in kg: 80 kgtravel of hook: 4,3 mNEWNever usedOVPPillar jib crane - lifting capacity 80 kgwith electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 HV.3 V16/4Year of manufacture 06/2024 - Hook path max. 4.3 mChain size 4.2 x 12.2 RDC/TDKMains connection 380 - 415 vUc: 24 vThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - mobile, drawbar-controlled tandem steering wheels - Hold-open device - Load capacity at 925 mm radius 550 kg - Load capacity at 1210 mm radius 450 kg - Load capacity at 1500 mm radius 350 kg - Load capacity at 1800 mm radius 250 kg - Load capacity at 1800 mm radius 150 kg - Max. hook height at approx. 750 projection 1950 mm - Max. hook height at approx. 1650 projection 2500 mm - Space requirement approx. W 880 x H 1250 x D 1800 mm - Weight 600 kg

arm length: 2500 mmtotal column height: 3100 mmmweight max. in kg: 125 kgswivelling range: 180 GradElectric 380 Volt: Hnad control: We have no documentation of this crane so we sell with a special price. Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column swaying crane, Demag / J.D. Neuhaus, 125kg with pneumatic chain hoist – used - : Price from location: 1.500.-€ (net)! Manufacturer: Demag Manufacturer chain hoist: J.D. Neuhaus Type: unknown or will be submitted later Year of manufacture: unknown or will be submitted later Payload: 125kg Height of the column and length of the boom must be submitted later Condition: good Available: from approx. Mid-January to mid-February 2ß25 Location: Munich. Later Frankenberg camp

arm length: 3000 mmweight max. in kg: 250 kgswivelling range: . Gradheight: 3800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mLifting height 3800 mmCrane number 1.27The techn. Information is provided bythe manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hoist, universal wire rope hoist, LuxemburgerGRAB HOISTT532Pulling force: 3200 kgwith approx. 20 m ropeRope diameter: Ø 16 mmused !Dimensions: 700 x 700 x 100 mm

arm length: 5500 mmtotal column height: 3600 mmweight max. in kg: 2000 kgheight: 4100 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mK9F 0902The techn. Information is provided bythe manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chain hoist with electric chassis, trolleyHADEFTYPE 30 / 85 ( 30/85 )Payload: 1000 kgChain length: approx. 5 mLifting speed: 1,1,00 5 / 6 m/minTravel speed: 4 / 16 m/minBeam width: approx. 100 - 180 mmLifting motor: 0.37 / 1.5 kWTravel motor: 0.06 / 0.25 kWvoltage 380 V 3AC 50 Hzcable length control bottle: approx. 3.0 mcable length power cord: approx. 20.0 mused, tested !Dimensions: 600 x 600 x 450 mm

Trolley, trolleySTEELused, tested !Dimensions: 330 x 240 x 250 mm

Trolley, trolleyPAGUSused, tested !Dimensions: 340 x 240 x 250 mm

Overhead crane with trolley, overhead craneSTAHLZL-C 125-13,60 Ebuilt: 1989Lifting capacity: 12,500 kgCrane track average: 13,600 mmTrack average cat: 1,400 mmCrane travel: 40 / 10 m/minTrolley travel: 20 / 5 m/minStroke: 5 / 0.8 m/minhook path: approx. 5.8 mwith test book and documentation !dismantled !used, tested !Dimensions: mm

Chain hoist with chassis mechanical, trolleyHADEFTYPE 11 / 77, 22 / 77, 19 / 90 ( 11/77,22/77,19/90 )payload: 1000 kgchain length: approx. 4000 mmcarrier mount adjustable: max 150 mmused, tested !Dimensions: 720 x 560 x 270 mm