168 results

Category: 303 blow moulding machines
New in: 1994
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Zweistaionenmaschine up to 5 ltr. now available

Category: 303 blow moulding machines
New in: 1981
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Two-station machine up to 2 ltr. Now immediate available

Category: 303 blow moulding machines
New in: 1980
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Single station machine up to 1.5 ltr. CoEx 6 layer with single head. Immediate available

Category: 303 blow moulding machines
New in: 1978
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Single station machine up to 3 ltr.

Category: 303 blow moulding machines
New in: 2006
Location: Land-de DE 22145 Hamburg, Meiendorfer Str. 203
Seller: KHS Corpoplast GmbH

Basic Data for Bottle and Installation Bottle max. Bottle-Height 350 mm at 10,800 bph. Technichal Data of Machine Space demand incl. Steep-angle-conveyor: 11,7 x 10,8 m Height of Machine: 3.545 m Height Steep-angle-conveyor : 4.1 m Total weight: 25,5 Tons Demand of chilled water for Blowmoulder: (Base-moulds and cooling shields) for 1.5 L, at8,5 bar, 24 m3/h and 10 0C: 62 kW Elektrical Data Connected Load: 400/3~/N- 50Hz Install. Heating power (Standar ...

Category: 303 blow moulding machines
New in: 1999
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Sevenfold extrusion head, 80 mm center to center. Type BKZ (double heart curve. The design is still produced and has proven ideal in practice. Die dia up to 30 mm. With parison programming cylinder.

Category: 303 blow moulding machines
New in: 2000
Location: Land-fi FI 00980 Helsinki, Hämeentie 15 S, 3rd Floor
Seller: JADE Trading OY

Blow Molder KOSME KSB 4000 for PET bottles 4 000 bph Manufacturer: KOSME Type: KSB 4000 Capacity: 4000 bph in 1.5 ltr Bottle size: 0.1 – 2.0 ltr PET Bottle max dimensions: 110 mm diameter, 340 mm height Year: 2000 Total power: 50 kW heating, 52 kW installed Heating modules: 4 Adjustment areas: 8 Nominal air pressure: 10 bar / 40 bar Dimensions: 4600 x 1700 x 2500 mm Weight: 5500 kg approx. Accessories: Preform bunker, preform erector and chiller included

Category: 303 blow moulding machines
New in: 2002
Location: Land-de DE
Seller: GloCon TST GmbH

Preform Injection Molding Machine sized for preform molding tools of up to 72 cavities @ 45 g unit weight. Equipped with large injection unit (120-mm-extruder, 110-mm-shooting pot for max.shotweight of 3.344 g PET). Complete process package includes: MOTAN-resin dryer and EISBAER-dehumidifyer.Maintained at top level availability (maintenance log) up to last shot before decommissioning in November. Equipment set up for shipment in GloCon. 32, 48 and 72-cav.-molds available.

Category: 303 blow moulding machines
New in: 1980
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Extruder 90/20D. Grooved barrel. Accuhead 4 litres. New PLC-control. Bottom blow stand. Very good condition

Category: 303 blow moulding machines
New in: 2005
Location: Land-de DE
Seller: GloCon TST GmbH

Premium stretchblow machine for production of approx.28.000 PET-beverage bottles/hour, in excellent, impeccably maintained condition (maintenance log), inspection date on agreement. Set up to blow preforms with PCO1881-neck finish. Has been upgraded with AIRBACKplus® air recovery systems in 2014 to reduce high-pressure air also resulting in reduced kWh-consumption and downsized compressor.

Category: 303 blow moulding machines
New in: 1986
Location: Land-uk UK
Seller: CNC Management Ltd

Make: Hesta Model: HS361 Extrusion Blow Moulding Year: 1986 Condition: Used Machine type: Other Location of machine: United Kingdom Control: Electromotor Hydraulic Width: 1.13m Length: 2.01m Height: 2.57m Service details: Full History Documentation / manuals included? Yes Is tooling / spares included? Yes Is the equipment viewable under power? Yes Machine Details Capacity: 750ccm Stations:1 Cavities: 1-2 Clamping PRESSURE: 18kN Max Bottle Dimensions: 85 x 185mm height, 750ml OR ...

Category: 303 blow moulding machines
New in: used
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Extruder 100/22D. 6 - fold head 100 mm center to center make Mueller. PLC-Control Siemens Simatic PP 17. Good condition. Optional: Bottles and waste conveyor, granulator, leak tester within the machine, material mixer / conveyor

Category: 303 blow moulding machines
New in: used
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Extruder 80/24 d. 4 - fold head 100 mm center to center. Moog control. Good condition. Optional: material mixer / feeder, bottles - and waste conveyor, leak Tester, granulator

Category: 303 blow moulding machines
New in: used
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

CoEx 2 / 2 extruder. 6 - fold head W. Mueller 50 mm center to center. Hot cut device. Good condition. Optional: material mixer/patrons, leak Tester, bottle - and waste conveyor, granulator

Category: 303 blow moulding machines
New in: 1988
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Extruder 38/20 d. Relay control. Hot cut. Head on-demand. With accessories: Material mixer/feeder, leak tester. Good condition

Category: 303 blow moulding machines
New in: 1993
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

3-layer CoEx. Doublehead 70 mm center to center. Relay control. Good condition.

Category: 303 blow moulding machines
New in: 1989
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Control PMC 1000. extruder 80/22D. Head on request. Good condition. Optional: Bottle and waste conveyor, granulator, Leaktester, material mixer/feeder

Category: 303 blow moulding machines
New in: 2000
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Estruder 70/24 d Grooved barrel. 4 - fold head 100 mm center to center make W. Mueller. Electronic control. Good condition. Can be sold with bottle and waste conveyor as well as granulator, leak Tester, material mixer/feeder.

Category: 303 blow moulding machines
New in: 1992
Location: Land-de DE
Seller: Maschinenhandel Kmet

The machine produces the technical parts! Year of construction 1992 clamping force: 350 kN Closing speed: 400 mm / s Screw diameter: 100 mm Length: 20 D Extruder drive: 81 kW Power extruder: 21 kW Hydraulic drive: 37 kW Servo hydraulic drive: 4 kW Operating pressure: 250 bar Capacity oil tank: 820 litres Tube head: WV 200 PE, 1 Double sampling Looper Tube feeding Punch Hose sealing device Bubbles thorn very good condition Machine can be visited under power!

Category: 303 blow moulding machines
New in: 1999
Location: Land-fi FI 00980 Helsinki, Hämeentie 15 S, 3rd Floor
Seller: JADE Trading OY

Blow Molder Krones Contiform C10 – 12 000 bph This blow molder was built by Krones in 1999, it was refurbished by Krones in 2016. The machine is currently installed, powered and can be tested, and it is available for immediate delivery. The delivery includes molds for 1.0 and 1.5 liter PET bottles. Chiller and preform feeder are NOT included. Manufacturer: Krones AG Model: Contiform 112 – 10 Year: 1999 Number of molds: 10 Capacity: 12 000 bph Bottle sizes: 1.0 and 1.5 liter Neck ty ...

Category: 303 blow moulding machines
New in: 1997
Location: AG
Seller: Optimisense LLC

SIPA ECS 10000 Injection Stretch Blow Moulding SIPA PET Preform injection / STRETCH BLOW molding machine Produces 20 preforms per side x 2 = 40 cavities Approximately 10 00 units per hour. Included preform mould for 250ml Neck Finish PCO 1810 Output : 10,000 BPH In excellent working condition Complete with TEC Tote preform conveyor and tote filler.

Category: 303 blow moulding machines
New in: 2001
Location: Land-it IT
Seller: SEPROTEQ

SIAD 40 bar air compressor plant WS3 capacity 900 m3/h Complete unit including dryer, chiller, tank, electrical panel. Perfect for Sidel, KHS, Krones and other make PET blow-moulding machines. Completely overhauled. Available immediately.

Category: 303 blow moulding machines
New in: used
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Songle head Torpedostyle, designed for fast colour changes. Die from 60 to 180 mm. With Parison programming cylinder. Good condition

Category: 303 blow moulding machines
New in: 1988
Location: Land-de DE 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Accuheadmachine for articles up to 220 ltr. 2 extruder S 70, output approx. 170... 180 kg in HDPE. Clamping force 700 kN.Accuhead 6 kgs. Hydraulic bottom moving control. Good condition. Free approximately January 2019

Category: 303 blow moulding machines
New in: 2003
Location: Land-es ES LaGornal/ Barcelona
Seller: KHS Corpoplast GmbH

Machines type 18 BLOMAX Series III machines number 38-019 Available from Tarragona / Spain First commissioning 2003 hours approx. 53,065 Capacity up to 1.5 l of silvered 27,000 (FL / HR.) Half load option 14,700 (FL / HR.) Great Teilung(50,8mm) for PCO 1881 and a.38 mouth Technical data for bottle and installation Bottle Max bottle height 350 mm up to 27,000 bottles per hour Technical data of the machine Space requirement with steep conveyors: 11,5 x 11,2 m height of the machine: 3.4 m high steep c ...

Category: 303 blow moulding machines
New in: used
Location: Land-es ES Tarragona
Seller: KHS Corpoplast GmbH

Machines type BLOMAX machines number 33-017 Available from Tarragona / Spain First commissioning 2004 hours approx. 28062 Capacity up to 1.5 l of silvered 18,000 (FL / HR.) Bottle Max bottle height 350 mm up to 18.000 bottles / hour Technical data of the machine Space requirement with steep conveyors: 19, 5 x 8,1 m height of the machine: 3.4 m high steep conveyors: 3.9 m Total weight: 18.2 tons of cooling water required for blow moulding machine: (shapes and cooling plates) at 1.5 L, at 8.5 bar, 24 m3/h  ...

Category: 303 blow moulding machines
New in: 2010
Location: Land-it IT
Seller: SEPROTEQ

High pressure compressor plant 40 bar SIAD tempo 1.850 m3/h Built in 2010, Complete with dryer, chiller, tank, electric Panel. Suitable for PET blowers Sidel, Krones, KHS, etc. Very good condition. Available immediately.

Category: 303 blow moulding machines
New in: 1998
Location: Land-fr FR
Seller: SEPROTEQ

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 molds. Linear oven with 10 modules. Capacity 6,000 to 7,200 bph, equipped for quick change shell molds. Personalization PCO28. Machine complete with preform Tipper, preform hopper and feeder. Optionally the air conveyors. Machine is still installed. Very well maintained machine with low operating hours.

Category: 303 blow moulding machines
New in: 1998
Location: Land-fr FR
Seller: SEPROTEQ

Sidel SBO 12 series 2 PET blow-moulding machine for 12 molds. Linear oven with 12 modules. Capacity over 15.000 bph Quick change for shell moulds. Personalization 29/25 for mineral water. Machine complete with preform tipper and feeding system, still installed and available immediately. Very good maintenance of the machine.

Category: 303 blow moulding machines
New in: 2000
Location: AG BB1 2 Blackburn, 1 Evolution Park, Haslingden Rd.
Seller: IPR-PETMachinery

Kosme KSB 4000 Linear Reheat Stretch Blow Moulding machine, year 2000 Includes: Lanfranchi Preform Tipper Preform Hopper/Elevator Infeed rail The machine was running until March 2017 with a maximum speed of 4000 bottles per hour (1.5L bottles). It is in very good condition and immediately available

Category: 303 blow moulding machines
New in: used
Location: 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

Injection blow molding machine in good condition. Screw diameter 35 mm. maximum ejection 190 g. Plasticating capacity 28 kg / HR. Mould closing force: ejection 360 kN. Blowing 90 kN. Mould platen size 380 x 456 mm. Mould hight closed: 254 mm. Mould span width 128 mm. With conveyor, temperature control. The complete injection unit was overhauled in 2015

Category: 303 blow moulding machines
New in: 2000
Location: Land-kr KR 440-2 Suwon, 627-8 Pajang-Dong
Seller: TMS CO.,LTD

IMPCO used blow molding machines -Model : BD30 -Screw diameter : 100mm -Manufactured year `1997 & 2000 -Quantity : 2 units Produce 5 gallon (20 liter) PC bottles

Category: 303 blow moulding machines
New in: 2006
Location: Country-es Spain, 47151 Valladolid
Seller: MachinePoint

14 cavities Neck type: 29/25 Container Size (Max.): 3 l Output: 26500 U/h

Category: 303 blow moulding machines
New in: 2003
Location: Country-es Spain, 47151 Valladolid
Seller: MachinePoint

Injection stretch blow moulding machines for PET bottles Container size (max.): 500 ml Number of cavities (blow):5 Materials: PET- RPET - Flakes

Category: 303 blow moulding machines
New in: 2006
Location: Land-es ES 0 LORQUI (Murcia), C/CONDOMINA S/N
Seller: INTER-MAQUINAS AGUILAR S.L

Bottle blowing machine Brand: SIDE Type: TMS 2006 Machine with new servo system Moulds of 0.33 and 0.5 (does not include the molds of 1.5 liters) speed max in 1.5Litros: 7400 b/h Speed max in 500 ml: 7800 b/h

Category: 303 blow moulding machines
New in: used
Location: Country-de Germany, 14513 Teltow
Seller: UES - Universal Extrusion Service

Two-station machine for containers up to 2 ltr. Doppelkopf DECO type S 2/35-110 W. Müller DECO 39/20. Accessories punch / bottle Unscrambler

Category: 303 blow moulding machines
New in: 1998
Location: Country-de Germany, 14513 Teltow
Seller: UES - Universal Extrusion Service

Injection blow molding machine, produces up to 90,000 bottles in three-shift operation 60 or 125 ml. good condition

Category: 303 blow moulding machines
New in: 1995
Location: Land-kr KR
Seller: BMJ KOREA

1 COMPRESSOR Make:Sinil(Korea) Year:1995 Press: 25.0kg/? Cap': 13.5?/min Motor:125HP 2 COMPRESSOR Make:Sinil(Korea) Year:1995 PRESS: 25.0kg/? Cap':6?/min Motor:60Hp 3. BLOW MOLDING MACHINE X2SETS Make:NISSEI(JAPAN) Year:1995 MODEL: ASB - 650NH2 ONE STAGE BIAXIAL ORLENTATION STRETCH PET REISN DRYER?HOPPER:1set 100kg/HR, MOLD DEHUNIDIFYER:1set MOLD CHILLING:1set 4 BLOW MOLDING MACHINE Make:NISSEI(JAPAN) Year:1994 MODEL ...

Category: 303 blow moulding machines
New in: 1997
Location: Land-fi FI
Seller: JADE Trading OY

Blow Molder SIDEL SBO 10 for PET bottles 12 000 bph This PET bottle blow molder is from recently dismantled PET filling line. It comes with complete preform feeding system and approximately 50 meters of air conveyors are available at additional charge left from this line. Dismantling was made by SIDEL service. Originally this line was installed in 1997 and was in operation until the beginning of 2018 when it was professionally dismantled and equipment is now in a warm warehouse. Manufacturer: SIDE ...

Category: 303 blow moulding machines
New in: 2004
Location: Land-fi FI
Seller: JADE Trading OY

PET Blow Molding Machine KRONES Contiform C16 This PET blow molding machine type Contiform C16 was delivered in 2004 by Krones and it is still in operation till December 2017. It is filling CSD and Carbonated water in 1.0 and 1.5 liter PET bottles, total running hours today is approx. 31 000. Preform feeding system is not a part of the delivery, one set of 1.5 liter molds will be a part of delivery. Equipment is in good condition and can be visited while operating. Video 1: abcs://abc.youtube.com/watch?v=iYbQ ...

Category: 303 blow moulding machines
New in: 2001
Location: Land-es ES
Seller: GINDUMAC GmbH

OVERVIEW: Brand: NISSEI ASB Model: PF4-1BH Application type: Blow Moulding Machine type: Blow Moulding Machine Availability: Immediately Construction year: 2001 Production hours: 45000 Location: Spain Origin country: Japan GENERAL DATA: Measurements width: 5700 mm Measurements depth: 1505 mm Measurements height: 2955 mm Machine weight: 9500 kg INJECTION UNIT: Injection pressure: 970 bar Screw diameter: 64 mm CLAMPING UNIT: Clamping force: 640 kN Opening stroke: 260 mm Ejector stroke: 48 m ...

Category: 303 blow moulding machines
New in: 2005
Location: Land-fi FI
Seller: JADE Trading OY

Complete PET Stretch Blow Station with BLOMAX 16 serie III Manufacturer SIG Corpoplast Manufacturer's type Blomax 16, Series III Made in year 2005 Capacity 22 000 bph Application Stretch Blow Molding Machine Neck standard PCO 1880 - 28 mm Condition Used - very good Container size (suitable)from 0.5 to 2.5 liters Air compressor Atelier francois CE 68A Discharge air pressure 40 bar FAD 35 m3/h Preform feeding station Simonazzi This BLOMAX 16, Series III, PET bottle blowing system is in excellent cond ...

Category: 303 blow moulding machines
New in: 1995
Location: Land-es ES
Seller: GINDUMAC GmbH

OVERVIEW: Brand: NISSEI ASB Model: 650 NHII Application type: Blow Moulding Machine type: Blow Moulding Machine Availability: Immediately Construction year: 1995 Production hours: 67916 Location: Spain Origin country: Japan GENERAL DATA: Measurements width: 7230 mm Measurements depth: 2350 mm Measurements height: 3296 mm Machine weight: 26000 kg INJECTION UNIT: Injection pressure: 1290 bar Screw diameter: 75 mm CLAMPING UNIT: Clamping force: 500 kN MEDIA: Main electronic connection: 380 ...

Category: 303 blow moulding machines
New in: 1992
Location: Land-es ES
Seller: GINDUMAC GmbH

OVERVIEW: Brand: NISSEI ASB Model: 650 NHII Application type: Blow Moulding Machine type: Blow Moulding Machine Availability: Immediately Construction year: 1992 Production hours: 72334 Location: Spain Origin country: Japan GENERAL DATA: Measurements width: 7230 mm Measurements depth: 2350 mm Measurements height: 3296 mm Machine weight: 26000 kg INJECTION UNIT: Injection pressure: 1290 bar Screw diameter: 75 mm CLAMPING UNIT: Clamping force: 500 kN MEDIA: Main electronic connection: 380 ...

Category: 303 blow moulding machines
New in: 1994
Location: Land-es ES
Seller: GINDUMAC GmbH

OVERVIEW: Brand: NISSEI ASB Model: 650 EXH Application type: Blow Moulding Machine type: Blow Moulding Machine Availability: Immediately Construction year: 1994 Production hours: 42528 Location: Spain Origin country: Japan GENERAL DATA: Measurements width: 7230 mm Measurements depth: 2350 mm Measurements height: 3296 mm Machine weight: 26000 kg INJECTION UNIT: Injection pressure: 1290 bar Screw diameter: 75 mm CLAMPING UNIT: Clamping force: 570 kN MEDIA: Main electronic connection: 380  ...

Category: 303 blow moulding machines
New in: 2011
Location: Land-at AT
Seller: Lovric Maschinenhandel e.U.

Screw 45mm Clamping Force 300kn Only 200wh !

Category: 303 blow moulding machines
New in: 1988
Location: Country-de Germany, 14513 Teltow
Seller: UES - Universal Extrusion Service

Two-station machine for containers up to 3 litres with single head or 2 x 1.5 litres with double head. Clamping force of 50 kN. Closing plate 400 mm in length, width 300 mm, 2 x 100 mm deep. Head as per need. Could be completely overhauled, also with new B & R control

Category: 303 blow moulding machines
New in: 1984
Location: Country-de Germany, 14513 Teltow
Seller: UES - Universal Extrusion Service

extruder S 60/20d, smooth barrel with fan cooling. Relay control. Simple head (another head possible)

Category: 303 blow moulding machines
New in: 1987
Location: Country-de Germany, 41812 Erkelenz
Seller: Maschinenhandel Kmet

Single station machine built in 1987 blow volume maximum 5 litres Extruder S 701 30 points programming - BEKUM PR 30 T PE - single head good condition

Category: 303 blow moulding machines
New in: 1989
Location: Country-de Germany, 41812 Erkelenz
Seller: Maschinenhandel Kmet

Year of construction 1989 Extruder 50 / 20 D 25 points Moog programming PE - single head Müller with leak control in the machine Very good condition - can be visited under power!

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)