basic foodstuffs and animal feeds machines used for sale (506)

Glass machine for small jars approx. 4800 per h output for yoghurt in a jar Format customizable and overhaulable

For sale is a powerful HST homogenizer, which has so far been used reliably in a cheese dairy. The device was built in 2016 and is in very good, well-maintained condition. It has been regularly serviced and is ready for immediate use. Line data: - Conveying capacity: 1,700 - 3,500 l/h - Maximum permissible operating pressure: 480 bar - Power main motor: 55 kW - Weight: 3,000 kg

Ritai 800L holding vessel Stainless, 800L capacity, jacketed vessel, holding tank, central bottom discharge

KEK Centrifugal sifter ideal for sifting and screening dry powders and other bulk solids, available with either 4mm or 6mm stainless mesh,

Faber SMESAMA Manual disk cutter 2020, Stainless, manual disk cutter is used to make disks or half wheels from cheese wheels with rind or previously scraped, max input product size 500mm diameter and 320mm height, 4 disks per min, 3Ph

Weber Waagenbau u. Wägeelektronik, Automatic scale for weighing, year of construction 1989, with Weber control Dialog 165V-SWA, year of construction 2001, max. 2.5 kg, used, Can be viewed on site beforehand,

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Boska Cheese cutter Stainless manual cheese cutter, cuts into segments with wire cut, tabletop

Piston-valve doser (as good as new) available at short notice. Flyer: - Capacity: 600 - 1200 filling processes/h - Filling volume: 30 – 500 ml - Suitable for liquid and absorbent products - 2 cylinders / 2 filling nozzles - Only pneumatics are required - 50l flow tank - Actuation with foot switch

Producent: LOMA Type: IQ 3 Metal detector LOMA type IQ 3 with Intralox conveyor belt Multi-Frequency Metal Detector with Conveyor Belt With TOUCH screen operator terminal Product Feedthrough: 550 x 150 (100) mm (W/H) Fully automatic metal detection system with evaluation electronics Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

8-fold roller mill BÜHLER MDDL 250 x 1000 mm B1/B2 - C1A/C2, 1 x grain feed (shaft/corrugation), 1x semolina feed, Knife scraper, gearbox converted to belt Original Bühler retrofit Feed drive B1 converted to geared motor Hand switch converted to solenoid valve Inlet and outlet divided Good condition!

Gericke CSM centrifugat rotary sifter Stainless steel Year 1998 CM 215009

RÜTER Control Sifter 4-piece, 600 high Product Distributor, Double Bearing, Covering 530my Screen stack cleaned, running pattern checked Good smoked condition

Stock# UG6390 Used stainless steel ribbon mixer by Młynpol (PL) model MP-3000. Mixer has volume 3000 l. Mixing shaft has welded double ribbon, and is driven via gearbox and el motor 22 kW. Central discharge outlet with pneumatically operated slide valve. Mixer is equipped with two hi-intensity agitators/choppers, each working with rotation 920 rpm. Top open, with hinged lid. Mixer mounted on stainless steel supporting frame. Shipping dimensions: L 510 cm x W 134 cm x H 195 cm x weight approx 2700 kg. Last time machine had been working in food industry.

Stock# UG6388 Little used single screw extruder by Farmet (CZ) model FE100 WE Clever Max. Machine can reach output in range from 90-130 kg/h. Power consumption 16 kW. Includes water pump, die cutting knife, some toolings. Local control panel with plc controls. Previously tested on animal food production. Dims: L 195 cm x W 102.5 cm x H 178 cm x weight 600 kg.

Stock#: U2466-1 Used stainless steel round vibrating screen by Allgaier (D) model D1200. Screen has working diameter 1200 mm. Single deck and cleaning deck with rubber balls. Central feeding inlet has diameter 200 mm. Side wall outlet has connection 145 mm. Central discharge of final product has diameter 200 mm. Screen is driven by two vibrating motors, each: 0,75 kW, 1000 rpm, 220-240/380-415 V, 50 Hz, kN 11,1 Ex design. Machine is mounted on stainless supporting frame. Additional equipment: - gravity feed metal detector by Cassel (D) model Shark 2, on stainless steel supporting frame - carbon steel construction frame with discharge stainless steel pipe and butterfly valve.

We have for sale little used Hunan Fumach Twin screw extruder. This extruder has undergone a complete overhaul where all electrical wiring has been refurbished, ABB motors, Siemens logic, etc. The modification work has been done in Finland and the modifications have been given the CE mark. The extruder meets all the directives required by the EU Twin-screw Extruder FMHE72 which can be used for processing cereals, snack food, Nutrition, rice protein, reengineering, Starch gelatinization, caramel, rice products, pet food, Aquatic product feed, etc. Manufacturer: Hunan Fumach Foodstuff Engineering & tech. co. Ltd Type: FMHE-72-24 Year: 2017 Production capacity: 300-1200 kg/h Screw type: Twin screw, diameter 72 mm Screw length diameter ratio: 24D Screw rotation speed: 50—500r/min Screw torque: 2100N.M Oil pump motor: 1.1 kw Barrel temperature: -20-300℃ Die temperatu ...

2 Elopak aseptic filling machines Gable format with 3 pack sizes 0.25, 0.75 and 1.0 l Both machines built in 2003 Type: Pure Pak PA 830 Serial No. 22064 Capacity: 2 x 10,500 E/h with Lid Storage Magazine with 3 co-rotating Elopak lid applicators with cardboard packing machine for 12 E/carton with complete palletizing system with pallet shrink-wrapping machine and b.) 2 complete process technology plants for fruit heating as plate heating systems and 1 sterile tank each, capacity5,700 l and 1 sterile tank with 7,500 l with automatic valves and 2 control systems

2 edible quark storage tanks with conical Spout and with intensive stirring with a mono pump for conveying into the Mixing and filling technology Tank capacity per tank: 1,300 kg Manhole above, agitator drive from above

A&F Butter Carton Packer As spare part machine last years of use, Type; 720-2.25.W4 Item no. 930300A Built in 1994 with garage content behind the A&F machine

1 A&F Butter Pieces Carton Packing Machine Molded Butter Carton Packing machine for 2 pieces of butter By A&F Jagenberg Group Formats: 25p0 g, xxx g Type: 720/2.25.W4 Item no.: 930390 B Built in 1994 With garage content behind the A&F machine

1 Galdi Gibelkarton filling machine for long-life fresh milk Type ESL milk with 30 days BBD Galdi model RG27Packaging format 1l, 0.5 l and 0.25 Cap at the moment OSO30 from 18.11.2025 (cap retaining ring) Year of Make: 2017 Operating hours September 2025 29,000 h Product ESL Milk, Soy & Oat Milk Performance 7,200 With outfeed belts, cap transport and our own CIP Most important spare parts package at 35,000 euros, still to be negotiated without ET

1 Waldner cup filling machine Round version, 2 cups/bar 95 mm with slip-on lid, Type Dosomat 1.2, No. 2070 Capacity 4,200 U/h, Year of construction 2014 with main feeder, circuit board Welding and slip-on lid feeding spout on round plates, Packing in crates by hand. Roller conveyor for the discharge of the filled Get.

Alpa Coagulator Soft Cheese Making Plant The Alpma system is built in 1992 and consists of the following plant sections Year of Make:1992 in operation until 2007 Manufacturer:Alpma Products: Feta cheese, Cammenbert cheese, Brie White Mold Cheese Hourly output 10,000 to 12000 litres per hour of milk supply The following accessories are included in the scope of delivery and plant components such as - Portioner TR. - Battery for feta cheese, Camembert diameter 86 mm - Battery for feta cheese, Camembert diameter 60 mm - Battery for Brie Soft Cheese - Horde tracks - Stackers for block moulds - Turner – Stacking track - Cross conveyor stack / drainer - Wender I - 4-lane drainer - Turner II - Cross conveyor stack / drainer - Intermediate railway to the Aushordun - Destacker for block molds - Umhordungsanlage / ziehanlage Type KZ - Dry salt plant - Tray S ...

1 Alfa Laval UHT line An Alfa Laval indirect tube UHT system Year of construction 2000 Output 12,000 L7h Compactly positioned on 6 x 4 m" with: a.) Tube heating plant, on frame upright, laterally shielded by Mudguards, temperature up to 145 °C without sterile tank, with low overflow completely piped in the direction of the filling machine, with flow vessel for the return flow. b.) 1 Alfa Laval homogeniser 3 pistons, power as mentioned above. Pressure up to 210 bar. Works in the ascending temperature range around approx. 65 to 85 °C c.) 1 control cabinet with Siemens S 7 control and with complete cabling. The Alfa Laval UHT system is located on the production site in southern Germany and can be visited in the company together with me become.

KEK Kibbler Serial: 11818KIB Stainless, Kek Kibbler pre breaker mill, ideal for coarse grinding, mounted on stainless frame, 7.5Kw motor, 80Kg stainless hopper, variable speed, comes with wheels, 3Ph

GEA Niro Ariete NS2006P piston homogeniser Serial: 12590 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph, with box of spares

GEA Niro NS2006P piston homogeniser Serial: 6233 2005, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph

- 1-lane rotary runner - Max. 2,400 cups / hour - Up to Ø95 mm cup conversion possible - Dimensions approx. 1,300 x 1,300 x 2,000mm - Year of construction approx. 1960s (unfortunately no more nameplate)