unwinder used for sale

Abwickler - Unwinder Stralfors Lasermax UW 52 (18073) Year 1996 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

M. No.: UW4 7119.00276.4D-11/01 // Speed: 80 m/min Airshaft diameter: 70mm or 200mm Equipment / Additional information: Power: 230V 50HZ

Without documentation.

Suitable for roll goods, voltage: 220/380V, power connection: 10A, with documentation.

The WH-1512 G reversible reel is an automatic double-sided winding and unwinding reel for metal strips. While the metal strip is being unwound, the interlayer paper is wound up at the same time. The reel is suitable for coils with the following dimensions: - Outer width max. 150mm - Coil outer diameter max.1200 mm - Spool weight per side must not exceed 150 kg (full spool)

Solvent-base & water-base combi laminating machine Max. coating width 1.100 mm Mechanical speed 450 m/1' Working speed up to 400 m/1' Roll diameter of the main unwinder 1.000 mm Roll diameter of the secondary unwinder 1.000 mm Reel diameter of the rewinder 1.000 mm Inner diameter of the main roller cores 152 mm Inner diameter of the secondary cores 152 mm Inner diameter of reel cores 152 mm Max. reel weight of the main reel 1.200 kg Max. roll weight of secondary unwinder 1.200 kg Max. reel weight of the rewinder 1.200 kg Tape tension range main unwinder 2 – 40 kg Tape tension range secondary unwinder 2 – 40 kg Tape tension range of the rewinder 2 – 40 kg Max. temperature in the dryer at a room temperature of 20°C 120°C Solventless lamination with one-component adhesive trolley cart with 4 solventl ...

Technical specifications: Max. width 330mm Max. Rewinding speed 200m/min Max. Control speed 250m/min Max Roll weight unwinder 150kg Max. Roll weight rewinder 70kg Max. Diameter unwinder 700mm Max. Diameter rewinder 400mm Max. Paper tension 5-100N Diameter Shaft unwinder 76mm Diameter Shaft rewinder 76mm Configuration: Unwinder Guidline Splice table Stroboscope Settings module machine Controle area (AVT camera not included) Bufferzone Extra webguide Niprol modules Slitting module (razerknives) Web clamp Rewinder (Friction shaft)

Materials: BOPP, PP ,CAST, ALU, LDPE, NYLON, PETP, OPA, Paper, PE, CPP, BOPET Working width 1300 mm Parent Roll Diameter 780 mm Final Roll Diameter 560 mm Maximum mother reel weight 400 kg Finished Roll Weight/Вес готовой бобины (kg) 200 kg Duble Unwinder Unwinder with shaft Rewinder with shaft Number shafts 2 Thickness range (microns) 12-250 Speed (m/min) 500 m/min Brake type With magnet Knife type/Тип ножа (circular, razor, scissor) Razor Slitting Width (mm) 35-130 Unwinder Roll Core Diameter 75 mm Rewinder Roll Core Diameter 75 mm Rewinder Tension (kN) 0-1000 Pressure 6 Bar Control system Voltage 3X380V Frequency 50 HZ Installed Power 55 Kw

Reel, unwinder, motorized reel for sheet metal processing, motorized reel, unwinder, sheet metal unwinder, belt feed system, belt system for eccentric press, hydraulic press -Manufacturer: Cisam Impianti, belt feeding system FEEDER -Type: 1000/2B -Passage: 395 mm -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829kg

Roller cutter aluminium Winding winding winding cutter Type: SBU Aluminium 30 -120 my, Laminates = 30 -200 my material width = 1100 mm Min. material width = 70 mm Speed mech.max = 600 m/min Railway trains max. 1000 N Unwinder diameter = max. 1300 mm Unwinder diameter = max. 800 mm Surface wrappers with winding arms Accessories

BGM Elite TT400 Table Top Slitter Rewinder  Age: 2020/2021  Web width- 400mm max.  Unwinder- 76mm (3") Mechanically expanding unwind shaft  Unwind brake manually adjustable  Unwinder diameter 406 mm (16") (equivalent to approx. 1000 m)Splice table  Air-controlled web clamps Feed shaft  Adjustable siliconised feed shaft  Main drive via AC motor Razor knife longitudinal cutting system  Lateral adjustability of cutter cassette +/- 8mm from zero point  Minimum cutting width 15mm  6 sets of knives  Closed safety system Rewinder  Electronically controlled web tension system  Max. Rewind diameter 406mm (16") (corresponds to approx. 1000 m)  Pneumatic rewind shaft 76 mm  Quick change rewind shaft (quick release system)  Convertible for inner and outer winding

Special offer: 6 col 1200 mm Flexotecnica flexopress, special price for quick sale can be shown in operation unwinder rewinder print repeat 300 up to 1200 mm! unwinder diam. 1000 rewinder diam 900 BUT CAN BE EASILY ADAPTED to 1000 mm ( by moving / changing place of the current actuator of the pressing shaft or by changing the actuator for a different one.-information from the printer) electrical drying priinting rolls: 300-6pcs,320-6pcs,340-6pcs,360-pcs,380-6szt, 400-6pcs, 420 -2pcs,440-4pcs,460-6pcs,480-4pcs,500-6pcs,520-4pcs,540-4pcs,560-4pcs,5 80-4pcs,600-6pcs,620-4pcs,650-4pcs,680-pc,700-4pcs,720-4pcs,750-4pcs,8 00-4pcs,850-4pcs,900-2pcs,950-2pcs,1000-2pcs,1050-2,1150-2pcs,1200-2pc s Machine offered subject to unsold Machine offered subject to unsold wide offer of high quality used machines for attractive prices we also buy for stock / warehouses in EU over 20 years o ...

GOEBEL U7 SLITTER-REWINDER, overhauled in 2010, working width 3.600 mm., materials min 20 max 95 gqm, for paper, board, tissue, core Ø on mother reel 76/152 mm., unwinder: max reel diam.1.450 mm, rewinder: max reel diam.1.200 mm., Slitting: minimum5 mm.on 76 mm core, average speed 1.000 m/min., web guiding unit, shear slitting system, very good conditions, (the yellow table before unwinder is no more avialnle), WORKING WIDTH: 3.600 mm. 141.73

VARGA FLEXO 800 Type HK68,, C.I. flexo printing,geared, 6 colors, working width 800 mm., Printable materials:, - Pre-treated plastics (PET, PE, BOPP), - Multilayer films, - Paper, - Lenze servomotors installed in machine- main drive, unwinding, winding, - pressure cylinder: central impression, - CI pressure cylinder material: ST52–3, - number of printing stations: 6 pcs, - printing length: 30–55 cm, - print length scale: 1 cm, - printing accuracy at constant speed ± 0.2 mm, - length register setting: manual, - cross register setting: manual, - maximum print width: 800 mm, - Maximum roll width: 900 mm, - Unwinder: 1 pc, - core diameter : 76 mm, - Maximum diameter of reels: 1000 mm, - mechanical speed: 15–120 m / min, - Machine weight: 7 tons, Equipment:, - Automatic, two-way winding and rewinding system that maintains a constant tensile force after setting the material parameters.  ...

Roll enlargement and slitting unit The equipment consists of: Walking conveyor Roll turner Unwinder trolley Unwinder Two-position scraper bender Correct-feed rollers Centering rollers No. 1 (RC 8 x 1600) Sheet straightening machine (5x230x1700) Roller conveyor with pressure roller Guillotine shears No. 1 (NNR 10-1700/2) Cleaning device Centering rollers No. 2 Complex for butt welding of strips L-1700-M-Sh Pulling rollers No. 1 Loop table No. 1 Centering rollers No. 3 Pulling rollers No. 2 Centering rollers No. 4 Disc shears Edge-crushing shears NKP 4-500 Roller conveyor idle Loop table No. 2 Separating device No. 1 Pulling rollers No. 3 Guillotine shears No. 2 Device for lane separation No. 2 Winding device Winder assembly Winder pinch roller Folding winder support Winder unloading device Unloading cart Column with rotary console

R26097/16 EDELMANN reel offset printing machine model: COLOR PRINT V72 SL age: 2008 paper web width: max. 720 mm printing width: max. 710 mm available: about 12/2011 Servo- drive microprocessing control reel/reel, reel/ sheet unwinder: reel diameter max. 127 cm BST web edge – and centre control Web length control 2 offset printing units automatic ink unit wash-up web turn hole punch device cross cutter UV dryer plow fold system Available: nach Absprache

R25972/18 GUSCHKY spiral sleeve wap-around arrangement age: 1990 available: immediately wap-around machine manufacturer: Guschky technical details: region inside diameter 20-100mm region wall thickness 5mm Max. belt speed 50 m/min Motor speed ca. 10 kW voltage 220V Three phase system electricity 50 Hz Air pressure 6 bar -------------------- pneum. saw: manufacturer: Guschky age: 1990 technical details: region inside diameter 20-100 region wall thickness 4.5mm Sleeve length 400 – 6100 mm --------------------- Unwinder and Gluestation manufacturer: Gasser age: 1986 technical details: gluer dip coating Number paperweb 8 + 1 seperate cover web Available: sofort

R25716 / 12 GOEBEL reel slitter model: Practica H III age: 1957 width: 1000 mm diameter unwinder: max. 1000 mm diameter core: 70 – 76 mm system: circular knife min. slitting width: 15 mm diameter rewinder: min. 15 mm, max. 400 mm core diameter: 12 mm speed: 300 m/min Available: sofort

R23801/12 JAGENBERG slitter rewinder model: Vari Dur age: 1974 Net width : 3.800 mm materials: - coated paper, gloss and matt, grammages from 50 to 250 g/m². max. speed: 1500 m/min. for paper of 250 g/m² (The speed depends on the quality and the grammage of the paper) max. unwinding diameter: 2.500 mm max. winding diameter: 1.525 mm min.cutting width: 100 mm N° of upper blades: 6 Unwinder: 5 singles unwinders max. width of reels: 1.730 mm min. width of reels: 450 mm max. unwinding diameter: 1.525 mm min. unwinding diameter: 300 mm (from 900 to 1700 mm of net width) 600 mm (from 450 to 900 mm of net width) max. weight of reels: 35 kN Available: sofort

R25972/18 GUSCHKY Spiral sleeve winding system Model: Built: Availability: instantly Wrapper: Manufacturer: Guschky Technical data: Area inner diameter 20-100mm Area wall thickness 4.5mm Maximum belt speed 50 m/min Engine power approx. 10 kW Voltage 220V Three-phase current 50 Hz Air pressure 6 bar -------------------- pneum. Saw: Manufacturer: Guschky Built: 1990 Technical data: Area inner diameter 20-100 Area wall thickness 4.5mm Sleeve length 400 - 6100 mm --------------------- unwinder and glue station Manufacturer: Gasser Built: 1986 Technical data: Gluing Diving Process Number of paper webs 8 + 1 separate deck Available: immediately

4-color R21046/16 EDELMANN continuous stationery press model: Varioprint age: 1994 web width: 52 cm 4 printing units reel – to - reel slide-in: 4 x 16 2/3 4 x 12 3 x 16 unwinder/ rewinder: 120 cm revolving slide-in in all 4 printing units SCHOBER double tool BST colour monitor Available: nach Absprache

Holweg RS 21 Bag making machine, for Flat- and satchel bags, with in-line printer and window unit. Holweg Rotosimplex 21, Year of production : 1981 with 4 colors inline printer W&H QMS 992, 4 anilox, 4 rubber cylinders. Bag width 70 – 380 mm Gusset depth 12 – 80 mm Bag length 145 – 660 mm Cut length from 160 to 680 mm Max paper width 900 mm, Max print width 860 mm Bottom from 13,3 to 18,3 mm ( on this machine also possible for bigger bottom fold ) Max. speed 800 bags/min. Paper 30 – 125 g/m2 Foil window unwinder. Printing format cylinders 41 pcs. (270-1, 290-4, 300-1, 320-3, 350-3, 360-2, 370-1, 400-4, 420-4, 440-3, 470-4, 520-1, 600-4, 640-4, 680-2) Forming plates 28 pcs. (80,85,90,100,105,110,115,120,130,140,150,155,160,170,175,180,185,190, 200,210,220,225,230,240,250,270,300,320) Equipment for 5 sizes of wicket bags: (cut lengths 400,350,450,470, 520)  ...

The BL series machines represent the peak of NERI’s production capability in the field of linear labelers and are the culmination of its many years of experience in selfadhesive application. The main features of these series are the particular balcony construction making extremely easy the clearance procedures, the positive transport system of carton in pitch making the machine completely fail-safe, the ergonomics reducing the accessibility in 70 cm only and dividing the machine in three areas: operative, mechanical and electrical. The BL machines can work in-line with other packaging machines, or as free standing units when fitted with required boxes infeed and outfeed devices. STANDARD FEATURES: Labelling machine balcony construction stainless steel executed. Electrical cabinet on machine board. Behind easy access from behind to electrical and mechanical parts; large door  ...

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

Corima AEC212 Syringe Labeler and Plunger Inserter with Plunger Unscrambler and Label Easy-Splice It is an automatic, continuous motion machine for syringe plungering and labelling. Main features: • Perfect operational repeatability; • Easy to use; • Minimal installation space; • Designed to manage each component with positive logic; • Totally customizable, with wide choice of optional units (e.g. Vision system, printing systems, feeding systems, etc); • High flexibility and capacity to process glass or plastic syringes. Standard constructional specifications: • Automatic syringe loading on roller conveyor; • Automatic loading of the plungers with elevator and roller conveyor or with vibrating feeder; • No syringe – No plunger loaded; • Totally parameterizable screwing unit; • Plunger assembly control; • External labelling unit complete with unwi ...

Digital Printing System Manufacturer: Canon Model: OC ImageStream 3500 Year: 2015 with Highspeed Printing Transport System MJP30CX-M11002 paper acceptance- / unwinder OCE ImageStream digital control panel Hunkeler Webinspetion W1630/42" year 03/2015 TFT Monitor ELO 2 Technotrans Beta K320L Year: 07/2014 cooling system server rack Supplies Located Germany Price: best offer Must be moved within two weeks

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

Cerutti coating machine for Paper, films and Aluminium Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporation (water). This process is repeated in lin ...

• Year of manufacture 2013 • Print Counter: 21.3 million A3 sheets | 6.3 million meters • Print Technology: Dry Toner electrophotography • 5/5 one-pass duplex | C M Y K + White/Spot Colour • Unwinder • Mode of operation: Roll to Sheet • BST with automatic web guide • Cutting Modules • Stacker Module with bypass • Resolution: 1,200 x 3,600 dpi with variable dot density • Media width: 320 mm up to 512 mm Printing width: 504 mm • Printing speed: Up to 15,600 pages / hour (depending on the substrates) • Web Speed: Up to 19.2m/min • Media weight: 40 - 350 gsm | 550 μm • Substrates: Papers, paperboard, synthetic media and labels • Digital Front End: Xeikon X-800 • The System was in Xeikon Service Contract

SUITABLE FOR PRINTING: BOPP, PP ,CAST, ALU, LDPE, NYLON, PETP, OPA, Paper, PE, CPP, BOPET BOPP: 10 - 100 microns CPP: 20 - 100 microns PET: 12 - 80 microns Printing Width: 1200 mm Web Width: 1300 mm Printing repeat: max 800 mm, min 350 mm max roll diameter: Unwinder: 1000 mm. Rewinder: 1000 mm. Drying System: electrical Ink type: solvent, Water base System: sleeved , Geared, Sleeve Width 1300 mm 35 - 5 pcs 38 - 6 pcs 40 - 6 pcs 45 - 6 pcs 48 - 4 - pcs 50 - 6 - pcs 55 - 6 - pcs 60 - 6 - pcs 66 - 4 pcs 69 - 5 pcs Anilox : 300 - 2 pcs , 220 - 2 pcs, 120 - 1 pcs, 100 - 1 pcs.

• Xeikon Service Contract from 2012 - December 2017 and from June 2018 until today • Year of manufacture: 2012 • Approximate 8,000 operating hours • Print Technology: QA-I Dry toner electrophotography • Imaging Head: 5 x High-Precision LED Print Heads • Printing Engine: Simplex, 5 colours (White + CMYK) • Media Input: Hunkeler Unwinder • Media Output: Hunkeler Rewinder with cutter • Imaging Quality: 1200 x 3600 dpi, variable dot density • Media Width: 250 - 516 mm Print Width: 508 mm • Toner: QA-I dry toner | Compliant with FDA and ISEGA • Printing Speed: Up to 594 sqm/hour • Media Weight: 40-350 g/sqm, 550 microns • Substrates: SA or PS label (Paper, PP, PET, Vinyl, co-extruded film) Paper, Paperboard, Transfer substrate • Digital Front End: Xeikon X-800 Version 3.71.x • Machine is still under production for small runs

450 Automatic Die Cut and Turret Rewinder 450mm Rotary Die Cutting unit: -Unwinder with auto web guider -Auto Tension Control system -Pressure meters for die cutting unit -Standard slitting unit with 6sets blades -Standard matrix removing system -Magnetic Powder system,mechanical speed 100meters/min -Max unwinding diameter 700mm, web width 330mm -Standard connection component to 330 turret rewinder 450 Auto Turret rewinder: -Automatic paper core bowl feeder -Automatic tail glue unit -Automatic paper core conveyor -Pressing paper swing arm -Automatic cut unit -Automatic finished roll ejection -Automatic brush press paper unit -Automatic core glue unit -Air expanding shaft 4sets each sizes 1’’, 1.5’’ and 3’’ -Labeling System (optional): Included Features: Speed: 60-100 m/min Max. Rewinding Diameter: 350mm Max. Web Width: 450mm Min. Rewinding W ...

- Year of manufacture 2009 | First Installation November 2009 - Total A3 sheets printed: approximate 26.4 million (status from June 2022) - Electrography using dry toner - 5 x High-Precision LED-Printing Heads (CMYK + White) - Standard Unwinder for rolls with 600 mm diameter - Rewinder - Media Width: 200 mm – 330 mm | Printing Area: max 322 mm x 55 m - Media Weight: 40 - 350 gsm (40 - 550 microns) - Web Speed 4/C: Up to 19.2 m/min. (Paper up to 350 gsm) - Printing Speed: up to 380 sqm/hour - Resolution: true 1.200 dpi at 4 bit (1.200 x 3.600 dpi addressability) with variable dot density - Substrates: SA or PS Label (Paper, PP, PET, Vinyl, co-extruded film), Paper, Paperboard, Transfer substrate - Digital Front-End X 800 with Control PC and 2 monitors - Xeikon Software X 800 Voyager with options Barcode and Seq Number - Machine is still under Xeikon Gold Service Contract  ...

1 MENSCHNER doubling / folding and measuring machine type RW 24/59 D, year 2001, folds article up to 300 cm in half it's width, with meter counter, with automatic selvedge control and overlaying device, entry with contact A-frame unwinder, mall roll or folded article, exit in roll of folded article, machine's motors are fully inverter controlled, with SIEMENS PLC type S7

The machine is designed to pack products individually, or in batches. OPERATION: After positioning the film on the reel unwinder and adjusting the work table according to the size of the product, the operator manually introduces the product into the film and transfers it to the welding frame. Once welding, the product is evacuated into the shrink tunnel through an ejection mat to retract the film. TECHNICAL: - Model: MATRIX - Power: 10 kW - Weight: 340 kg - Maximum height of the product: 180mm. - Height adjustable welding conveyor. - Pneumatic descent of the welding frame. - Control by push button, or pedal, or cycled operation. - Ejection mat with fixed speed of 7.6 m/min. - Metal mesh tunnel belt with variable speed from 3 to 10 m/min. - Electronic regulator-controlled pulse welding. - Welding blade in high position. - Tunnel temperature regulated by electronic th ...

foil width: 1400 mm max. speed: 250 m/min Diameter of the holes: 0,3-2,8 temperature: 400 °C heating capacity: 37 kW Control: Touchscreen Perforation machine (Star_2) with unwinder and rewinder (MTX_03 touchscreen) Machine is new, used less than 100 hours. HOT MICROPERFORATORS = With the hot needle technique, the hole is created by the melting of the material caused by heated needles. The pin cylinders are mounted on a perforation roller. They are heated to a temperature of 400°C by special lamps. This technology creates homogeneous holes and was developed in the 1980s. An industry standard wiring closet system with Wifi modem (purchased separately and configured), for wireless connection to any existing inline production system. User-friendly and multilingual control panel with additional buttons/knobs for manual operation. Intelligent Web Guidance System : For precise control over p ...

WENZHOU HT-GF500B automatic disposable gloves making machine built in China in 2020, is intended for the production of foil gloves used for example, in grocery stores or in production. A solid machine body made of high-quality steel ensures high stability of the structure even at maximum production speed. The machine for making plastic gloves produces up to 220 pieces of disposable gloves in one minute, with a maximum length of 400 mm and a maximum width of 300 mm. The manufactured foil gloves have two layers of foil with a thickness of 0.008 mm to 0.02 mm, thanks to which they effectively protect hands against bacteria and viruses. The total weight of the machine is approximately 1600 kg. There are six such machines on sale, all built in 2020. Characteristics of the WENZHOU HT-GF500B automatic disposable gloves making machine - number of produced gloves: 180-220 pcs/min - num ...

Min-max cutting width: 250-1150 mm Max reel width: 1200 mm Reel weight: 1100 kg Internal core: 70/76 Max reel diameter: 1050 mm Max speed: 195 m/min Power 400 V, 50 Hz Air 6 bars Double reel unwinder Double photocell/register control Touch screen control panel for cutting on size starting from reel to sheet Materials: ALU, plastic film, paper from 10 to 250 grs, laminates and tissue paper, paper + cardboard, adhesives, shoppers paper, gift paper, offset paper, wrapping paper for pastry, washing etc.. plastic film from 30 to 200 my like PE, pvc, PP, polyester, celluloid, others Electronic counter of pieces

olienherstellung =: PVC shrink and PET Line speed: 80 meters/min Final net film width: 4.2 meters Line speed: 80 meters/min Production capacity: 21 tons/day The machine includes: -Automatic turnstile unwinder 2 meters -Automatic turnstile -Winder 4.50 meters -Cooling system -automatic thickness control -automatic control of infrared heating -Automatic inline edge strip handling system -TCU -Controller fan -Cooling tower -Exhaust pipes -Exhaust hood -16 steel core width 4.8 meters -Complete spare parts (package purchased for 280.000 €) Dimensions approx. length 50 m x width 19.0 m x height 5.9 m

Bandwidth.. 870 mm Band thickness 0.2-3.0 mm Coil weight 10 to. Coil ID Unwinder... 400/508/750 mm Coil ADBewinder.. 1,500 mm Cutting performance. 110 N/mm2 Velocity 120 m/min.

Corona Pull Roll Station 1 Primer Coater & Dryer 3 Extruders (with QSE Adapter, extrusion Do, Die, Gravimetrics 3+1) Auxiliary Unwind with splicing unit shafted desi! Laminator Edge Trim Razor Blade Beta Thickness Gauge PROTAGON Corona with Nip Station 3 Edge Trim Shear Cut Centre Slit&Spreader Ro Automatic Splicer Two direction Rewind Shafted Design Typlcal substrates: Paper:20 - 150 g/m2 Aluminium :6,35 - 25 μm PE:40 -120 μm BOPA: 15-50 μm BOPET: 9 -50 μm (smooth and metallised) BOPP: 15- 50 μm (smooth and metallised) Nonwoven PP: optional The extruder or extruders of the extrusion sta· motorized carriage. This carriage with a 3-\i UP/DOWN,LEFT/RIGHT and IN/OUT travel. The extruder carriage consists of: guide frame 4 wheels. Height adjustment traveldrive Side adjustment Control cabinets EXTRUDER A Screw diameter: 114.3mm (4.5 inches) Screw ...

RUIAN KODA MACHINERY ENG-500 film glove production line, built in China in 2020, is designed to produce high-quality double-layer film gloves that are used in e.g. grocery shops or in production. The high-quality steel construction of the automatic glove making machine ensures high stability even at maximum production speeds of up to 500 gloves per minute. The film glove production line uses moulds to produce disposable film gloves with a maximum length of 400 mm and a width of 300 mm, providing effective protection against viruses and bacteria. The 2.2 kW YASKAWA servo drive, which controls the entire process, ensures high precision in feeding the material to the sealing position and the sorting point of the final product. The ENG-500 film glove making machine also allows the production of other film products, such as breakfast pouches, after changing the heat sealing dies. The au ...

Web width 340 mm Printing width 330 mm Repeat length 10-25 inch Max.mechanical speed 5-200 m/min Substrate thickness 14-450 µm depending on material Max. reel diameter-unwinder 1000 mm Max. reel diameter-rewinder 1000 mm Standard diameter expandable shafts 76 mm UV drier (IST) 145 W/cm Web break and splice control Corona treater (Vetaphone) 3000 W Web inspection (BST) Electrical specification 400V, 3 phase, 50 Hertz Flexoplate thickness 1.14 mm Double sided self-adhesive tape 0.55 mm

RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...

Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 8, gearing 1/8”CP Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder see list Lateral register: ± 5 mm Longitudinal adjustment unlimited at all printing and die cutting stations, selectable from mobile control console, smallest adjustment 0,05 mm. Automatic register control: Sensotec automatic register control, web to web comparison for print stations and web to cylinder for die cutting stations. Front to Back Register control system Web inspection Tecscan web inspection system Drying optimized hot air drying Web turner rail mounted moveable platform with E&L web guide. Webguide Fife web guide before rot ...

AL-2500/KX knotted wire mesh production machine was built in 2013 by KABEX P.P.H.U.. The purpose of the machine is to produce damage-resistant and durable wire mesh made of galvanised wire with a maximum length of 100 metres and varied wire cross-sections. The AL-2500/KX fixed knot net production line consists of: – machine body (1 unit), – guide roller with a brake to increase wire tension (1 unit), – tool table with turning rollers and wire guide tubes and plates (1 unit), – wire feeder with wheels that feed the appropriate length of wire onto the tool table for wire wrapping (1 unit), – pulling drum (1 unit), – mesh winding drum (1 unit), – twisting mechanisms (27 units), – guillotines (26 units), – wire bending clamps (27 units), – net stacking table, which performs a reciprocating motion in order to place the net coils tightly next to each other (1 u ...

EFI VUTEK LX3 PRO DS DIGITAL for Point of Presentation 8 col. Perfect your POP print business The EFI VUTEk® LX3 Pro printer is designed for POP productivity and packed with innovation only available from EFI™. Versatile 3.2 meter hybrid flatbed/roll-fed printer prints on materials up to 2 inches (5.08 cm) thick Lowest total cost of ownership in its class Eight colors plus white and multilayer printing Resolutions of true 600 or 1000 dpi Features 12pL grayscale print technology Powerful LED technology Eight colors plus single-pass multilayer and white ink printing Resolutions of true 600 or 1000 dpi 12pL grayscale print technology Powerful LED curing technology Continuous print productivity with less than five seconds between boards for faster job turns Standard multi-queue on-demand functionality for multi-job printing Multi-roll capable – two 60 in (152 cm) r ...

The unit is suitable to pack blisters in PVC + Aluminum, Aluminum + Aluminum, Polypropylene, PET and PVC, Aclar, COC. All the stations are remarkably easy to access and all the movements are fully visible, so that the line is very easy to clean. This machine is equipped with various safety devices to protect the operator. Product parameters can be recalled from a PC, for a quick and easy format change. Reel unwinder driven by a Brushless motor, with automatic machine stop at reel end. Film splicing table equipped with integrated cutter, and automatic vacuum. Forming station entirely managed by Brushless motors. Self-aligning pre-heating plates, independently motorized. Film positioning driven by Brushless motor. Automatic Pitch adjustment directly from the display. Loader trolley MS170 with a maximum load of 300 kg. Dedicated product feeder and relevant enclosure easily remov ...

Triplex solventless Laminator, The machines of 2018 are like new. Only about 200 hours Matrial for lamination : PP, Bopp, Pet ,laminates ,LDPE, LLDPE. web width =1530 mm Max lamination width = 1515 mm, Min. film width = 750 mm, Min. film width with extensions = 550 mm, diameter unwinder = 1000 mm, sleeve 76 / 152 mm, diameter rewinder = 1200 mm, sleeve 152 mm Speed = 450 m/min, Accessories: The machine has many accessories such as 2 mixing plants World Mixer SL 1 Cleaner SL

Gallus R200 B02 10-color – Age: 2007  Manufacturer: Gallus Ferd. Rüesch AG Configuration:  10 x Letterpress Units  2x unwinder, 2 DW left, 3 DW left, 3 DW right, 2 DW left, K250  Year of construction: 2007 (extension 10 colours)  Rotastance 360° servo drive  Rotastanze 360° servo-drive (middle 6's block)  Rotor dryer servo-drive  IS UV system M25-8x1-R-HP-SLC, UCS 6  Chill-roller technology  2 Web Edge Controls  Softal corona system VS  Tecknek web cleaning  Sensotec register control system (LCD touch screen monitor)  K250 winder automatic Tech. Specifications: Colour: Gallus NCS blue  7 red blanket printing units left  3 units red blanket printing unit right  1 screen printing unit left  1 screen printing unit right  1 hot stamping unit incl. temperature control unit  All positions prepared for ...