127,517 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
floor-plate length:6000 mm floor-plate width:2000 mm floor-plate height:460 mm weight of the machine ca.:12,5 t dimensions of the machine ca.:6 x 2 x 0,46 m
floor-plate length:6000 mm floor-plate width:2000 mm floor-plate height:460 mm weight of the machine ca.:12,5 t dimensions of the machine ca.:6 x 2 x 0,46 m
FULLY-AUTOMATIC can be used in SEMI- AUTOMATIC mode with small different batches on and off when needed No operator (you save 1 man per shift) Low maintenance costs (no discs, just knives which can be re-sharpened) No need to reduce size, on most scraps. Suitable for film + foam + fibers, moisture and some contamination are well tolerated. Best degassing in the process, compared with other systems. Remote assistance through modem Agglomerator with barrel diam. 1500 mm.,LxWxH 4,3 x 2,3 x 5,050 mt. 570 kw , installed power abput 370 kw in work Steel cylinder case with inspection door, Side opening panel for inspection and replacing blades Power switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam vacuu ...
Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg
Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg
Used Used filler for oil 14 valves 2.000 bph: Year: 2004 Condition: As Is Used filler oil | 2004 Year: 2004 Speed: 2.000 bph Direction: clockwise Number of valves: 14 Type of filling: high vacuum Type of product: oil Safety protections Code: T 174 More details: https://bottlingscout.com
Used Used Case Packer Wraparound: Year: 2006 Condition: As Is Used Case Packer Wraparound Year: 2006 Speed: 950 pz/h Glue closure Bottles: 6 and 12. Safety protections Code: JL 250 More details: https://bottlingscout.com
Used Used Case Erector mh-fj-3a: Year: 2015 Condition: As Is Used Case Erector mh-fj-3a: Model: MH-FJ-3A Year: 06/12/2015 Closing box by Tape Layout: Lenght 3050 mm; Weidht 1240 mm (with plate for cartons close, otherwise 2240 mm) Haight: 1700 mm Speed: 10 CPM Safety protections Code: G 88 More details: https://bottlingscout.com
Tumbler screening machine used for fractionating of fine and ultra-fine bulk solids with high screening efficiency, for sensitive and valuable products, protective screening, dedusting and smooth operating principle. Diameter: 800 mm. Screen area: 0,5 m2. Rated electric power: ± 0,75 kW. This tumbler screening machine was previously used in a cheese plant in Europe., Type of Machine: Tumbler screening machine, Diameter: 800 mm, Screen area: 0,5 m2, Rated electrical power: ± 0,5 kW - 400 V - 50 Hz
Various tool holders, collet chucks, lathe chuck = SK40/ISO40 of Chalice + Comet + Miscellaneous Including Editing Tool Year of manufacture: unknown Auction-ID: A1-48483-33
This machine is set up for pushing and pulling forehead and helical wheels according to the rolling process. By means of a special device, gears can also be produced using the hand-cut process. Normally, cutting wheels with approx. 4\" = 100 m/m pitch circle diameter . Since the machine works according to the rolling process, only a cutting wheel of a certain module, all the number of teeth can be cut. Dimensions for external gearing: - Largest wheel diameter for Strin wheels: 1000 mm - Largest wheel diameter for helical wheels: 750 mm - Largest tooth width: 160 mm Dimensions for internal gearing: - Largest wheel diameter for Strin wheels: 750 mm - Largest wheel diameter for helical wheels: 750 mm - Largest tooth width: 130 mm - Largest pitch to be planed in steel: 8.5/8.6 module - Hole of the table spindle : 160 mm - Number of ram strokes: 6 - Number of cut ...
approx. 70 stubs from 0.5 - 8.0 mm, 1/10 mm rising Total length approx. 59 mm Head diameter approx. 19.2 mm Head height approx. 9 mm Shank length approx. 46 mm Shank diameter approx. 12.5 mm Thread approx. 12.4 x 1.3 mm (measured) Threaded length approx. 14 mm Colraces are slotted 3x
Changing gear set according to pictures Interchangeable wheels - number of teeth: Z 23 / 24 / 25 / 26 / 27 / 33 / 38 / 40 / 43 / 46 / 47 / 49 / 50 / 53 / 54 / 55 / 58 / 59 / 63 / 66 / 77 / 78 / 84 R / 90 / 95 / 96 / 100 / 102 / 104 / 108 / 110 / 112 / 116 / 124 / 128 Auction-ID: A1-48483-59
Changing gear set according to pictures Interchangeable wheels - number of teeth: Z 20 / 22 / 24 / 25 / 27 / 33 / 38 / 40 / 43 / 46 / 47 / 49 / 50 / 53 / 54 / 55 / 58 / 59 / 63 / 66 / 77 / 78 / 84 R / 90 / 95 / 96 / 100 / 102 / 104 / 108 / 110 / 112 / 116 / 124 / 128 Auction-ID: A1-48483-60
Fork clamp beveled, DIN 6315 B, slot width×whole length: 24x315 mm >> Technical description >> --> Slot width: 24mm --> full length: 315 mm --> for tension screws: M22; M24 --> Height: 40mm --> Width: 64mm --> Type: 6315 B --> Product Type: Clamp -> Weight: 3.80kg per piece Auction-ID: A1-48483-98
Height gauge (0 - 600 mm) + counter holder including wooden transport container Auction-ID: A1-48483-20
Precision - Universal measuring table with stabilizer \"small\" Table = 100 x 150 mm Measuring height/tripod approx. 245 mm Strong cast base; rectangular measuring table. Measuring table surface ground with incorporated dust grooves. Center column with adjustment nut. horizontal adjustable cross arm for dial gauges or fine indicators. Auction-ID: A1-48483-52
Changing gear set according to pictures Interchangeable wheels - number of teeth: Z 20 / 30 / 30 / 35 /40 / 40 / 40 / 45 / 45 / 50 / 50 / 50 / 50 / 55 / 60 / 60 / 60 / 65 / 65 / 70 R / 70 R / 70 / 75 / 75 / 80 / 80 Auction-ID: A1-48483-61
Hand drill with crank, more precisely a so-called drill crank / breast lyre --> The crank with handle ? for turning by hand --> The round button at the other end ? for pressing (often against the breast or palm) --> The drill chuck at the front ? here the drill is clamped Such devices were used in the past to drill holes without electricity, usually in Wood. By turning the crank, the drill is mechanically set into rotation. Auction-ID: A1-48483-129
Changing gear set according to pictures Interchangeable wheels - number of teeth: Z 21 L / 25 L / 30 L / 35 L / 41 L / 47 L / 53 R / 59 R / 65 R / 70 R / 76 R / 80 R / 84 R Auction-ID: A1-48483-57
Precision - Universal Measuring Table with Staiv \"Large\" Table = 180 x 215 mm Measuring height/tripod approx. 465 mm Strong cast base; rectangular measuring table. Measuring table surface ground with incorporated dust grooves. Center column with adjustment nut. horizontal adjustable cross arm for dial gauges or fine indicators. Auction-ID: A1-48483-51
Changing gear set according to pictures Auction-ID: A1-48483-75
Changing gear set according to pictures Auction-ID: A1-48483-77
Electrode welding machineElectrode cable Welding current max. 230 A Connection voltage 400V Weight 80 kg Dimensions LxWxH 500 x 250 x 350 mm Condition: unchecked (6) Auction-ID: A7-48486-220
Clamping plate 1400 x 1200mm Height 200mm Groove 38 x 38mm see pictures Auction-ID: A7-48486-21
Electrode welding machine Welding current max. 230Ampere Weight 55Kg see pictures Condition: unchecked (6) Auction-ID: A7-48486-130
Marking table with groove 22 x 22mm Table area 1600 x 800mm Table height 890mm Weight 800Kg see pictures Auction-ID: A7-48486-93
5 pieces, mobile dock levellers made of aluminium, – used- : Price per piece from location: Type 1: normal (approx. 2 pieces) now only 450.-€ instead of 650.-€ (net)! Type 2: two side tread plates (approx. 3 pieces) now only 550.-€ instead of 850.-€ (net)! Manufacturer: unknown, could be Altec Type: unknown, could be HF 09, Year of manufacture: unknown Width approx. 1.50m Length with movable driveways at the ends: approx. 2.35m Load capacity: unknown, could be 1800kg Net weight: unknown, could be 107kg Original price approx. 1.900.-€ (net) Condition: good Available: immediately Location: Niedernberg near Aschaffenburg
Press company Walter SL 60t (beverage vending machine) 1991 Punching machine Peddinghaus 1997 Longitudinal seam welding machine Weil 2007 NC Milling Machine FP-4MA N/A Lid CNC Milling Machine DMC63-V N/A Lid Maho Automatic Circular Saw KKS 450 R 2008 Kaltenbach MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Synergic Unknown Fronius MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Synergic Unknown Fronius
58 pieces of roll containers, transport trolleys with plastic plate – used - : Price per piece from location: only 85.-€ (net) Price for complete acceptance, per piece ex location: only 75.-€ (net)! Manufacturer: unknown Type: unknown Year of manufacture: unknown Payload: unknown, should be at least 500kg Dimensions: Width: approx. 75cm Depth: approx. 70cm, with handles approx. 77cm Height: approx. 1.80m Most trolleys have a height-adjustable intermediate floor (wire mesh) 2 push handles Three sides closed Condition: good Available: immediately Location: Heilbronn
Key data: 15 KW, 400 V
EC Power Gas CHP XRGi 15G-TO Electricity and heat generators, unknown year of manufacture, unknown operating hours, with controller, without buffer memory and q-Network Controller. 15 KWel, 400 V / 50 Hz. Manufacturer: EC Power Model: XRGi 15G-TO Type: Gas CHP Serial Number: 40181104 Power [KWel]: 15 Power [KWth]: 32 Power [KWgas]: 55 Year of manufacture: unknown Operating hours: unknown Weight [kg]: 650 Dimensions LxWxH [m]: 1.40 x 0.80 x 1.30
Transition / Stairs / Crossing, 3 stairs – used- : Price from location: 1.950.-€ (net), dismantled, packed and loaded! The position of the stairs on the landing can be changed. Manufacturer: unknown Type: unknown Year of manufacture: unknown Gratings Metrics: Platform height: approx. 1.60m Platform width: approx. 1m Platform length: approx. 3.65m (length outside incl. railing: 3.73m) Length: Stairs: approx. 2.10m Stair width: approx. 90cm Step spacing: approx. 20cm Step depth: approx. 26cm Step width: approx. 80cm Railing height: approx. 1.10m Gap between the platform supports: approx. 2.35m Condition: good – very good Available: now Location: Biebergemünd
at least 3 x roller conveyor undriven / gravity with end piece, width 0.79m. Length approx. 8,40m – 9m - used - : Price per parcel ex location: 850.-€ (net), dismantled, packed and loaded! The roller conveyors are sold in packages / package length: approx. 9m – 2 pieces approx. 8.40m Manufacturer: unknown, could dematic one (was installed a lot at the location) Type: unknown Year of manufacture: unknown Element width: approx. 0.79m Roll length: approx. 62cm Channel width: approx. 73cm Length: element lengths approx. 2.40m and 2.90m Roll diameter: approx. 4.5cm Roll spacing: small Sale without feet Condition: good Available: immediately Location: Frankenberg camp / Saxony
We sell 12 x Lenovo ThinkPad T14, each with 16GB Ram, 512 GB SSD, i5-10210 U 83 x Lenovo ThinkPad T15, each with 16GB Ram, 512 GB SSD, i5-10210 U 2 x Lenovo Thinkpad E570, unknown config but complete 2 x Lenovo Thinkpad E470, unknown config but complete 6 x Lenovo Thinkpad E480, unknown config but complete Total Qty: 105 All systems are G1, all come with power supplies and German keyboards. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QU ...
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: Unknown Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of manufacture: Unknown Voltage : Unknown Power : 18,5kW Frequency : 50Hz Capacity : 3.33 m³/s approx. 20.000m³/h The plants are all dismantled and stored on pallets
approx. 38m driven roller conveyor in 2 levels (2x approx. 19m) - used - : Price ex location: 2.500.-€ (net), dismantled, packed and loaded! Manufacturer: unknown, Type: unknown Year of manufacture: unknown driven approx. 19m in 2 levels Element width: approx. 63cm Roll length approx. 47cm Roll diameter approx. 4.5cm Incl. feet (height adjustable) Height second level: approx. 1.34m Sale without control, photoelectric sensors e3tc.! Condition: good Available: from approx. End of October 2024 Location: CZ, Bor, later camp Frankenberg / Saxony
Compressor Make Whispair / Contimeta Model unknown Year unknown Volume/c apacity unknown, but assumingly around 250-300 liter per minute (Conservative number) Pressure 8 bar Tank 100 liters? Details 2 oil free cilinder pumps, a so called silent silent and this in a silence reduced cabinet. Available direct
Name: Water Filter Manufacturer: Unknown Type: Unknown Rod diameter: approx. 52 mm Insert height: approx. 140 mm (dimensions: approx. 360×250×140 mm) Weight: approx. 2.43 kg Country: Unknown Short Description: Industrial water filter with blue plastic housing and black plastic inlet and outlet ports. Equipped with a metal bracket for easy wall or machine mounting. Robust design for filtration of cooling water or process water in technical systems. Used condition with visible signs of wear. Price without VAT
Name: Water Filter Manufacturer: Unknown Type: Unknown Rod diameter: approx. 30 mm Insert height: approx. 140 mm (dimensions 360×190×140 mm) Country: Unknown Short description: Robust plastic water filter with integrated wall bracket and ball valve. Blue finned housing for better heat dissipation. Suitable for industrial applications or water treatment systems. Used, with visible signs of use, but in working order Price: Price without VAT
approx. 200 pieces, stacking yokes for long goods storage, stacking yokes 700mm wide, 300 and 500mm high – used - : Price per item (net): 99.-€ incl. loading! Price per compartment divider: 39.-€ (net)! Manufacturer: unknown Type: unknown Year of manufacture: unknown Load capacity 2000kg lacquered in RAL3027 partly covered with plastic strips on the inside approx. 100 pcs. inner dimensions 770x500x500mm (LxWxH) approx. 100 pcs. inner dimensions 770x500x300mm ca. 40 pcs compartment dividers for yokes with H=300mm Condition: good Available: now! Location: A-8580 Köflach
Key data: 150 KW, 250 kVA, 400 V
K+S Gas-CHP GTK 140 Natural gas, electricity and heat generators from 2011, unknown operating hours, with control. 140 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 250 LB4, 250 KVA Manufacturer: K+S (Kuntschar and Schlüter) Model: GTK 140 Type: Natural Gas Electricity and Heat Generator Serial Number: 00825 Power [KWel]: 140 Engine: MAN E2876 E312 Motor power [KW]: 150 Year of Make: 2011 Operating hours: unknown Weight unit [kg]: 4,500 Dimensions LxWxH [m]: 3.50 x 1.30 x 2.30 AC Generator: MarelliGenerators MJB 250 LB4 Manufacturer: MarelliGenerators Model: MJB 250 LB4 Type: AC Synchronous Generator Serial Number: MY28069 Power [KVA]: 250 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 361 Speed [1/min]: 1,500 Year of Make: 2011 Operating hours: unknown Weight [kg]: 705
Air-conditioned safe as a kind of container, – used - : Price on request! Manufacturer: unknown, can be submitted later Type: unknown, can be submitted later Year of Make: 2020 Dimensions: unknown, can be submitted later Door: Manufacturer: ECB-S Type: Strongroomdoor CWT085L Year of Make: 2020 Cert, mark No335 Resistance grade: III Weight (kg): 873kg Incl. pin input field, dorma Kaba Condition: good Available: immediately Location: Mainz area
Ramp - used - : Price ex location: only 2.500.-€ (net) incl. dismantling, packed and loaded! Manufacturer: unknown Type: unknown Year of construction unknown Since the ramp has no acceptance or the like, it is sold as scrap Height Length 5.42 m Width 2.25 m (travel width 2m) Ramp height 1.15 m Load capacity no specification, but in use with 2to. Stacker without problem. Condition: good Available: immediately Location: Aschaffenburg area
Equipped with: professional LAS 203C MIG/MAG welding machine on 380 V (3-phase), suitable for steel constructions, bodywork and general maintenance, the machine is mobile and comes with a MIG/MAG welding torch, ground cable, pressure reducing valve/pressure gauges, connection cable and protective gas cylinder (content and filling unknown), technical data, brand: LAS, type: 203C, process: MIG/MAG, power supply: 3-phase 220/380 V, 50-60 Hz, maximum welding current: 200 A, duty cycle: 50%: 200 A / 24 V, 60%: 180 A / 23 V, 100%: 140 A / 21 V, open voltage (U0): 17-39 V, protection class: IP21, insulation class: H, forced ventilation, included MIG/MAG welding torch, ground cable, power cable with 3-phase CEE plug, pressure reducing valve with double pressure gauge, shielding gas cylinder (filling unknown), mobile base, dimensions (approx.) 850 × 450 × 750 mm (L × W × H), weight (approx.) ...
maximum number of results exceeded
please refine your search
75 € 
