unknown used for sale

Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Used tank stainless steel, vertical tank, capacity 25.000 l. These are specialized tanks for holding warm chocolate. External coil heating or cooling (depends on medium fed into the coil). Tanks equipped with agitators for dense liquids. The tanks look like new, perfect condition, french production (of good steel), very shortly used (liquidation of the plant in France). Height 7m. diameter 2.7 m. 4 pieces available.

length:250 mm width:200 mm height:400 mm Base plate dim:400 x 400 mm

table length:1400 mm table width:1400 mm table height:740 mm weight of the machine ca.:1 t

The Breaker device is used to form a foil on a roll, it enables the insertion of an opening-closing tape. The machine is powered by 380V.

The rewinder / perforator is used to rewind the foil from the thimble to the thimble with the control of the foil rewinding length. It also allows you to make perforation at a certain length. Thanks to this machine, it is possible to make very long pieces of foil, used in industry or agriculture. The machine is powered by 380V.

approx. 70 stubs from 0.5 - 8.0 mm, 1/10 mm rising Total length approx. 59 mm Head diameter approx. 19.2 mm Head height approx. 9 mm Shank length approx. 46 mm Shank diameter approx. 12.5 mm Thread approx. 12.4 x 1.3 mm (measured) Threaded length approx. 14 mm Colraces are slotted 3x

Conveyor belt with cleat belt, stainless steel, approx. 3.90 m long. Strap width approx. 62 cm.

Knife vegetable peeler carrot parsley cucumber. Carrot machine not for asparagus is very different. Carrots dont peel well on asparagus. Capacity 300 - 500 kg per hour Attention, a machine with a belt feeding the product to the knives - significantly improves and increases the efficiency of peeling. Machine without photocells and sensors, etc. simple, easy to clean and operate. Catalog and parts available. Completely different quality on the nose than on corundum

V195 1 electric steamboiler Loos/Germany EUR 1.500,- loaded year 1990, 6 bar, 164°C, capacity 115 kg/h, 81 kW, 380V/50 Hz, volume 85 ltr. EUR 1.500,- loaded ex works V196 1 electric steamboiler Roucka-Slatina/Czech. EUR 1.500,- loaded year 1993, 9,5 bar, 177°C, capacity 120 kg/h, 90 kW, 380V/50 Hz EUR 1.500,- loaded ex works

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Ter Braak Type: depowder drum for mogul plants electrical: 380V, 3ph We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau unpacked

Technical data Units: horizontal: 3

Technical data Voltage 50 Hz 3x: 380 Volt Weight: 120 kg Dimensions: Length: 1200 mm Width: 630 mm Height: 1800 mm

Technical data Weight: 30 kg Dimensions: Length: 400 mm Width: 600 mm Height: 700 mm

Technical data Max. diam. of external gear: 600 mm Module max.: 20 mm Module min.: 0.5 mm Table load max.: 250 kg Distance between centres (min.): 25 mm Distance between centres (max.): 500 mm Error increase: 1:: 250 1:: 500 1:: 1000 Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1000 mm Width: 1000 mm Height: 2200 mm

Technical data Execution: barrel-burnishing Number of tanks: 2 Polishing bell Behältergrösse: hexagon up: 400 mm Charging hole:: 2 x Length: 150 mm Width: 150 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 2.2 / 1.6 kW Overall dimensions machine: Length: 900 mm Width: 800 mm Height: 1300 mm

Technical data Circulary table diameter: 400 mm Overall dimensions machine: Length: 700 mm Width: 600 mm Height: 1800 mm

Technical data Execution: one wheel Max. wheel diameter: 280 mm Voltage 50 Hz 3x: 380 Volt

Technical data Quantity delivered: 60 l/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 90 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 500 mm

Technical data Table length: 900 mm Table width: 530 mm

Technical data Table length: 700 mm Table width: 350 mm

Technical data Screw diameter: 45 mm Pressure: ca 4 to Execution: Double column Table size: Length: 150 mm Width: 110 mm Slide stroke: 45 mm Distances: table to slide: 95 - 135 mm between the columns: 120 mm Overall dimensions machine: Length: 650 mm Width: 530 mm Height: 1350 mm

Technical data Voltage 50 Hz 3x: 380 Volt Dimensions: Length: 1200 mm Width: 800 mm Height: 1200 mm Various accessories: Magnetic separator Paper filter facility

Technical data Units: horizontal: 4 Number of positions: 4 Number of work stations max.: 4 Work-piece clamping: with device Voltage 50 Hz 3x: 400 Volt Overall dimensions machine: Length: 1800 mm Width: 1400 mm Height: 2000 mm

Technical data Taper in spindle: 50 ISO Machine´s weight about: 70 kg Overall dimensions machine: Length: 700 mm Width: 300 mm Height: 500 mm

Technical data Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1500 mm

• Rotor length 250 mm • Rotor Ø 115 mm • Stainless steel version • Opening inlet 240 x 240 mm, opening outlet 220 x 220mm • Drum cover for drum Ø 630 mm • Speed infinitely variable by variable speed gear • With 1 sieve mesh size approx. 2 mm • Without control cabinet • Drive 400V/50Hz

Schwingkipptisch 1 / tilting table We offer: 6 used vibration table / table We offer: a used Schwingkipptisch 1 / tilting table 1 3.50 x 8.00 Technical data: Manufacturer: unknown Type: 8 x 3.5 m Machine number: unknown Year of built: unknown Documentation: not available Schwingkipptisch 3000 x 8000 x 8 mm designed for a traffic load estimated p 500 kp / m² = m², with formwork upper part completely stored on vrwindungssteifen Kippramen. Under construction from solid shape Weldment for establishing free to carry firm, level floor. Fully fitted with built-in tilting hydraulic for tilt at approximately 80 °, with 2 cylinders, electrical pump unit with oil tank, control and limit switch device and piped inside the tilt table construction. Ingredients: Vibration / vibration motors: 6 pieces Manufacturer: VEB Baustoffmaschienen Ludwigslust Type: A 800/3 28/71 No. o.a. 43190 ...

approx. 236 fields, frame height: 3m, shelves: 0,80m x 1m, – used - : Construction site price – primarily complete acceptance - : Price for complete acceptance: only 12.500.- € (net) = only 53.-€ / field, dismantled, packed and loaded! Price for partial quantities: Price per field ex location: only 75.- € (net), dismantled, packed and loaded! We reserve the right to take a minimum order! Manufacturer: unknown (probably Bito, Meta, Berger or similar) Type: unknown Year of construction: unknown Frame height: approx. 3m Shelves: 1m wide, 0.80m deep Payload per floor: unknown, but should be at least 150kg / floor 7 soils per field Available: from now on Condition: used (a bit dirty, see photos), not necessarily suitable for goods that are sensitive Location: Gau Bickelheim

Special price from the construction site: approx. 1,700 shelving units, moulting, heights approx. 2.50m, shelves 1.20m x 0.70m – used – : = Price per cultivation field: only 55.-€ (net) ex site, dismantled, packed and loaded! Price per basic field: only 65.-€ (net) from the site, dismantled, packed and loaded! Price for complete acceptance from site: only 85.000.-€ (net), dismantled, packed and loaded = only 50.- € (net) / field! Manufacturer: Mauser Type: unknown – would have to be SR-409 Year of manufacture: unknown Frame height: approx. 2.50m Shelves dimensions: 1.20m x 0.70m Load capacity per shelf: unknown, but at least 100kg Field load: unknown 6 floors per field! There are shelves / shelves that 1.20m x 0.70m, i.e. have a continuous surface and there are shelves / shelves that 1.20m x 0.35m deep, where the shelves on the front and back ...

Special price from the construction site: approx. 300 trays, moult, heights approx. 2.50m, shelves 1.20m x 0.35m – used – : = Price per cultivation field: only 45.-€ (net) from site, dismantled, packed and loaded! Price per basic field: only 55.-€ (net) ex site, dismantled, packed and loaded! Price for complete acceptance from site: only 12.500.-€ (net), dismantled, packed and loaded = only 42.- € (net) / field! Manufacturer: Mauser Type: unknown – would have to be SR-409 Year of manufacture: unknown Frame height: approx. 2.50m Shelves dimensions: 1.20m x 0.35m Load capacity per shelf: unknown, but at least 100kg Field load: unknown 6 floors per field! Condition: good Available: from approx. Beginning of December 2023 Location: Munich

At least 4 pieces of type panel trolley with lattice back walls – used- : Price per piece ex site: 295.-€ (net)! Manufacturer: unknown – probably Fetra Type: unknown Year of manufacture: unknown Dimensions unknown – probably like a Euro pallet (approx. 1.20m x 0.80m) Condition: good Available: now Location: Wenkbach

Long work table / packing table – used- : Price from location: 450.-€ (net)! Manufacturer: unknown Type: unknown Year of manufacture: unknown Dimensions unknown 2 drawers Condition: good Available: now Location: Wenkbach