universal tool used for sale

Attention: the machine can be transported on a truck up to 3000 mm wide! Incl. the tool holders located in the tool changer. Additional technical specifications: • Setup mode X/Y/Z: 20 - 2000 mm/min • Position measuring system X/Y/Z: 0.001 mm • with in total 32-tool changer (2 x 16 places) • Max. tool diameter with fully places magazine 1: 130 mm • Max. tool diameter with fully places magazine 2: 80 mm • max. tool weight at automatic tool changing: 8 kg • Max. total tool weight in magazine: 160 kg • NC rotary table built into the rigid table. • Number of T-slots: 14/H 12 mm • Aligning slot/one: 14/H 7 mm • T-slot spacing: 63 mm • Permissible load of work tables: Rotary table: 500 kg

Incl. 60-fold tool changer, NC rotary table with swivel axis, incl. three-jaw chuck, jaw width: 250 mm, incl. tool holders located in the tool changer, incl. chip conveyor and coolant unit Attention: The machine can be transported on a standard truck! Additional technical specifications: • Measuring system resolution X/Y/Z: 0.001 mm • Position tolerance in X/Y/Z: 0.010 mm • Max. tool length from spindle nose: 280 mm • Max. tool weight for automatic tool change: 6 kg • T-slot spacing: 63 mm 14 H 7 • Center bore: 30 mm • Swiveling speed: 26 rpm • Input and display unit: 0.001° Note: No guarantee can be given regarding the current runout or machining accuracy of the machine. We have received information indicating a possible deviation in the area of the tool holder or clamping system. An appropriate inspection is recommended.

incl. NC rotary table, with 9 slots, incl. the tool holders located in the tool changer as well as chip conveyor and coolant unit Attention: the machine can be transported on a standard truck. Attention: the vices visible in the photos are not included in the scope of delivery! Additional technical specifications: • nominal current: 80 A

Incl. 60-fold tool changer, NC rotary table, incl. tool holders located in the tool changer, incl. chip conveyor and coolant system. Attention: without the machine vise shown in the photos! Additional technical specifications: • nominal current: 100 A • Path measuring system resolution: 0,001 mm • Input resolution in X/Y/Z: 0.001 mm • Position tolerance in X/Y/Z: 0.010 mm • max. tool diameter with free adjacent places: 160 mm • tool length from spindle nose without tool breakage monitoring: 350 mm • with tool breakage monitoring: 315 mm • max. tool weight at automatic tool change: 10 kg • max. total tool weight in magazine: 200 kg • Distance of T-slots: 63 mm • Number of T-slots: 9/14 pcs • Center bore: 50 mm • max. rotation of the table top: 20 rpm • Feed: 3600°/min • Resolution of the measuring system: 0.001°

Attention: the hydraulic clamping systems visible in the photos are not included in the scope of delivery! Attention: the machine can be transported on a standard truck! Additional technical specifications: • Year of manufacture: presumably 2006 • Slots: 9 pieces • Swivel head: 360° • incl. protective enclosure

Incl. NC rotary table, also a simple pallet changer system, incl. the SK 40 tool holders located in the changer as well as chip conveyor and coolant unit. Attention: the machine can be transported on a standard truck! Additional technical specifications: • nominal current: 80 A • Distance between clamping holes: 100 mm • Number of clamping holes: 33 mm • Center bore: 50 mm • Max. rotation of the table top: 13.6 rpm • Feed: 3600°/min

Key data: 880 mm, 630 mm, 630 mm

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 T With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 880 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Rotary Table 0 700 mm integrated into Rigid Angle Table 1250 mm x 700 mm Clamping surface Vertical tool changer with 32 magazine positions (SK 40) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Spiral Screw Conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions

Management Heidenhain MillPlus IT Travel distances X/Y/Z: 730 x 510 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 60 Wkz., SK 40 NC rotary table integrated in rigid table d 600 mm / 1000 mm x 600 mm Controlled NC swivel milling head (B-axis) incl. hydraulic clamping Swivel range -120/+30° 3D quick SET Production package 40 bar/23 l/min (theor. Pump capacity)Tank 600 l Paper Belt Filter rotating viewing panel Chip conveyor

Parallel Lathe CAZENEUVE HB 500 Between points: 1000 mm Maxi Ø on bench: Ø 500 mm Maxi Ø over saddle: Ø 190 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 1600 RPM Turret: MULTIFIX type B 3-jaws chuck Ø 215 mm Threadings: Metric + Whitworth Tailstock: CM5 Scale: 2 axes NEWALL Recent electrical panel Supplied with 1 tool holder + 1 set of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1400 x 1600 mm Weight: approx 2 T

CONTROLS   Point-to-point control (NC) HEIDENHAIN TNC 124 WORKING RANGE -CUBIC-   X-axis travel: 600 mm   Y-axis travel: 400 mm   Z-axis travel: 400 mm TABLE   table surface (left-right): 800 mm   table surface (front-back): 425 mm   workpiece load (max): 250 kg SPINDLE / HEAD   spindle revolutions (max): 4500 /min   tool fixture: ISO SK 40   drive power: 7.5 kW ELECTRICAL SPECIFICATIONS   mains power supply: 13 kVA DIMENSIONS / WEIGHTS   space requirements -left/right-: 2720 mm   space requirements -front/back-: 1850 mm   total height: 2300 mm   total weight approx.: 2025 kg ca 2000 h

x-travel: 600 mm y-travel: 400 mm z-travel: 320 mm table-size: 900 x 420 mm control: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/min quill stroke: ja mm total power requirement: 5,0 kW weight of the machine ca.: 1,45 t dimensions: 1,6 x 1,2 x 1,9 m Features: - Digital display - Coolant system - Milling head with quill The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 720 x 410 mm spindle turning speed range: 40 - 2000 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 40 total power requirement: 3,0 kW weight of the machine ca.: 1,4 t dimensions: 1,8 x 1,6 x 1,9 m Milling machine with - Toolmakers table - Heidenhain digital readout - Rapid traverse - Coolant system - Central lubrication - Machine feet - incl. drawer unit with contents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 760 mm y-travel: 381 mm z-travel: 450 mm quill stroke: 152 mm table-size: 1300 x 305 mm control: Heidenhain TNC 360 tool adaptor: SK40 turning speed range: 100- 4.000 U/min rapid speed: 5000 / 7000 m/min feed speeds: 2,5 bis 3000 mm/min power requirement: 2.2 kW diameter of quill: 101 mm total power requirement: 15,0 kW weight of the machine ca.: 2,4 t dimensions: 2,4 x 2,3 x 2,2 m Equipment: - Heidenhain TNC 360 - Coolant system - Hydraulic tool clamping - Milling head with quill - Machine light - Chip tray - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stephan UMC5 Universal Machine used Stepless speed Bowl capacity: 5 litres Double coat Frequency Inverter 300-3000rpm Knife insert good condition with vacuum pump and temperature control unit Pointer of the pressure gauge is crooked, does not affect the function should be thoroughly cleaned before use. It is fully functional and runs neatly and smoothly. Video about test run available

Key data: 450 mm, 600 mm, 330 mm

Manufacturer: Hermle Model: C 22 U Year: 2018 Condition: Used Stock number: 8975 Control system: Heidenhain TNC 640 Switch-on hours: 23,000 h Number of axles: 5 pieces X-axis travel: 450 mm Y-axis travel: 600 mm Travel travel Z-axis: 330 mm Speed: 18000 1/min Cone: HSK-A63 IKZ: 80 bar Tool holders Internal air supply through the spindle Left scraper conveyor Blower device Additional hopper ZM192 Coolant mist extraction Blowing air through the center of the spindle Rinsing gun Blum calipers Blum Tool Gauge LC50 TL200 Equipment: Chip conveyor Rotary table (320 mm)

turning diameter over bed: 510 mm turning diameter over slide rest: 310 mm centre distance: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 3-jaw chuck (diameter 250mm) tool holder device tail stock 3x steady rest Technische Daten / technical details: Spitzenweite / center to center 2000 mm Umlaufdurchmesser über Bett / rotary diameter over bed 510 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 310 mm Spindelbohrung / spindle hole 52 mm Drehzahlbereich / spindle speed 44-2240 UpM /rpm Gewicht der Maschine ca. / weight ca. 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmSpeed max.10000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)43 NmMax. torque64 NmTool Magazine with24 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

GeneralVertical-Machining centre Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal1450 mmCross700 mmVertical550 mmTool changerType of magazineWheel Type of gripperDouble gripper Number of tools30 TableTable surface 1760 x 750 mmMaximum load (table centre) 2000 KgSlot width 14 mmNumber of Slots 7 Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Tool magazine 30 pockets HSK-A63Tool magazine 30 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct tool loading into the tool magazin ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal700 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minSpindle speed 24,000 rpmSpindle 24,000rpm with tool taper ISO 7388-2 - J30 BT30 / BBT 30 (BIG PLUS) possible for pull-studs ISO 7388-3 - JD30 (MAS 403-45°) at spindlespeed higher than 20.000 rpm BBT 30 (BIG PLUS) stipulated! AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spin Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-ax Rot ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)57 NmMax. torque83 NmTool Magazine with24 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm) SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872 Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperature Electronic HandwheelExternal electronic Handwheel

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm B - axis: -120 / + 30 ° NC- swivellable rotary table - Ø: 700 mm control: iTNC530 Heidenhain number of spindle speeds: 10.000 1/min spindle taper: SK 40 DIN 69871 max. torque at 40% / 100% load: 28 / 19 kW tool change unit: 2 x 16 Pos. table-size: 1250 x 700 mm table load capacity: 650 kp total power requirement: 44 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,50 x 3,20 x 2,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stephan UMC12-F Universal machine Stainless, Bowl capacity 12L, jacketed bowl, with vacuum, variable speed, with Haake D8 circulating waterbath, top mounted bowl scraper, on mobile stainless frame, 3Ph

sheet width: 3200 mm plate thickness: 4.0 mm ST distance between columns: 3300 mm upper clamping bar adjustment: 400 mm Adjustment folding beam: 80.0 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN rear stop: 10.0 - 1600 mm oil volume: 160 Liter total power requirement: 9.8 kW weight: 8500 kg range L-W-H: ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition () - inspected condition - machine video - https://www.youtube.com/watch?v=RY-amZooeX4 Equipment: - robust CNC folding machine - CNC control unit - CYBELEC DNC 80 PP swiveling control panel, front right 2D graphic display for visualization and multi-simulation 2D graphic programming easy operation - CNC motorized backgauge travel range 10.0 - 1,600 mm pneumatic / retractable gauge fingers adjustment speed max. 250 mm/sec. rear sheet support table with brushes - motorized lower beam  ...

CNC woodworking machining centre with adjustable workpiece supports, vacuum pods, machining spindle, HSD boring head and circular saw unit. The lot includes: - Control cabinet with monitor, keyboard and control buttons - RM850 handheld control pendant - Separate pedestal-mounted control panel - Foot controls - Becker vacuum pump - Separate auxiliary cooling unit - Roller conveyor sections shown in the photographs - Machine-mounted extraction hoses and safety fencing shown Auction-ID: A1-50699-5

CNC woodworking machining centre with adjustable workpiece supports and vacuum pods. Supplied with control cabinet, operator control panel, foot pedal, extraction hoses, safety fencing and Becker VTLF 250 vacuum pump, as pictured. Vacuum pump nameplate details: - Brand/type: Becker VTLF 250 - Year: 2004 - Serial number: A 1939039 - Motor rating: 5.5 / 6.4 kW - Speed: 950 / 1150 rpm - Inlet capacity: 248 / 300 m³/h - Vacuum: 200 / 200 mbar Auction-ID: A1-50699-8

with digital display, type: CHECKOMATIC 1200, max. grinding length: 420 mm, center height: 150 mm, with swivel-in internal grinding spindle, belt filter system and coolant device

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm turning speeds: 50- 4000 U/min total power requirement: 17,5 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,0 x 2,7 x 2 m Description: - excellent condition - Heidenhain ND780 digital readout - infinitely variable speed control - infinitely variable feed drives - hydraulic tool clamping - mechanical handwheels - electronic handwheel - drilling quill - horizontal milling spindle - coolant system X-travel 620 mm Y-travel 420 mm Z-travel 400 mm Spindle taper ISO 40 DIN 69871A Spindle speeds 50 - 4000 rpm Table size 800 x 400 mm Table load 400 kg Feed rates infinitely variable, max. 2000 mm/min Rapid traverse 5 / 4 m/min Drive power - milling spindle (S1) 10.5 kW Quill stroke 80 mm Coolant system Operating voltage 400 V Total power requirement 17.5 kW Machine weight approx. 1.9 t Space requirement approx. 2.00 x 2.76 x  ...

x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 830 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a training workshop. Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing Manual The data for this ad was created with ModulMWS - the software solution o ...

x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 950 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine comes from a training center. Equipment: 3-axis active digital readout made by Heidenhain Infinitely variable feeds and rapid traverse in all 3 axes Fixed angle table Coolant equipment Tailstock with counter bearing Several toolholders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minIntegrated swivel rotary table simultaneousIntegated swivel rotary table DMP 35 version 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 6-channels Inclusive So Tool magazine 25 placesTool magazine 25 places (suitable for inclusion in the tool spindle) Max. tool length 150 mm Chip-to-chip time 1.6 sec Note: machine width increases to 1410 mm! Spindle speed 24,000 rpmSpindle 24,000rpm with tool taper ISO 7388-2 - J30 BT30 / BBT 30 (BIG PLUS ...

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMaximum load (table centre)1000 KgSpeed max.12000 rpmDrive power (100% DC)11 kWDrive power (25% DC)15 kWTool Magazine with60 PositionsSpindle taperBT 40 Movement X / Y / Z1100/560/510 mmRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont) Spindle Taper 7/24 Taper #40/ Grip MAS <BT40>Spindle Taper 7/24 Taper #40/ Grip MAS <BT40> This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately. Retention Kn ...

Key data: 800 mm, 700 mm, 600 mm

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P hi-dyn With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 700 Z 600 Speed range: 0 – 8,000 rpm infinitely variable ( SK 50 ) With the following accessories: NC rotary table 900 mm x 700 mm clamping surface Automatic Swivel Milling Head ( HORIZONTAL + VERTICAL ) Universal tool changer with 30 magazine positions as double gripper ( SK 50 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel IKZ – 40 bar Chip conveyor Rotoclear Operating mode 3 + 4 3-Piece Height Adjustable Machine Shoes Swarf Spray Gun Operating Instructions

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmTorque (40% DC) 48 NmSpeed range 20 - 15000 rpmSpindle taper BT 30 Clamping System ISO 7388-3 - JD30 Toolchangertoolchanger Type of magazine Wheel Number of tools 15 TableTable surface 740 x 420 mmMaximum load (table centre) 400 KgPreparation NC-Devider EA510 indirectPreparation 4.th axis Lehmann EA 510.L indirect measuring System Attention: Customer specific optimisations and adjustments are not part of delivery! Chip removal package with chip conveyorChip removal package with chip conveyor ...

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabin DMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampi Tool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard) Number of tools 150 Preparation measuring probe T ...

GeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with40 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgSpindle speed 20 - 12,000 rpm SK50, 288NmSpindle speed 20 - 12.000 rpm SK50 for tool taper according to DIN ISO 7388-1-A50 with power 44/32 kW // 59.0/42.9 hp with torque 288/187 Nm (40/100% DC) (differently from standard) Tool magazine 40 pocketsTool magazine 40 pockets SK50 chain magazine with pockets and double gripper, incl. manually direct loading into the tool magazine Coolant-air blast change-overCoolant - Air-blast changeover external switchable via M-Function Air blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rate Internal coolan ...

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools30 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmSpindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possible Tool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper ...

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Tool magazine 60 pockets HSK-A63Tool magazine 60 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct ...

GeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with30 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgSpindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possible Tool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper, incl. manually direct loading into the tool magazine Coolant-air blast change-overCoolant - Air-blast changeover external switchable via M-Function Air blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil  ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)57 NmMax. torque83 NmTool Magazine with24 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm) Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperature SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872 Signal lamp with 4 colours standardSignal lamp with 4 colours Red: General error Yellow: Intervention nec ...

X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible.

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwhe Air coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline X Multi-Touch control CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minSpindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwhe Air coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-F ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 40 barProduction Package 40 bar Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - Tool clamping buttons on the headstockTool Clamping and Unclamping Buttons placed on the Headstock Cover Air coolant internal (through spindle centre)Air C ...

GeneralVertical Machining centre; Control: Control SIEMENS ERGOline IV CharacteristicsTable surface1400 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 220 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwh Air coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with lo ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Touch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipment Touch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minSpindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - E Active cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stability Air c ...

GeneralHorizontal machining centre - Horizontal milling head; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical900 mmCabineFull protection cabin Direct measuring systemDirect path measuring system NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 630 x 630 mmCentre bore 50 mmMaximum load (table centre) 900 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degreePackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)  ...

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmMaximum load (table centre)600 KgSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)54 NmMax. torque82 NmTool Magazine with30 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z600/560/510 mmRapid feed X / Y / Z30/30/30 m/minDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mWeight approx.5200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System DMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the h Safety Package for Power FailureSafety Package for Pow ...

GeneralHighly productive compact machining centres; Control: Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical1-60000/1-60000/1-60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross420 mmVertical380 mmMiscellaneousClamping SystemMAS 403 - 45° Floor space/WeightDimensions (L x W x H)1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) mWeight approx.4100 KgSpindle speed up to 24,000 r.p.m. BT30Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan) TableTable surface 840 x 420 mmMaximum load (table centre) 300 KgSlot width 14 mmNumber of Slots 2 Clamping grid M 12, 100 x 100 mmTool clamping for BBT 30 (Big+)Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45° Tool magazine 25 placesTool magazine 25 places (su ...

Key data: 1500 mm, 700 mm, 600 mm

Universal Milling Machine HURON MU6 Travel X: 1500 mm Travel Y: 700 mm Travel Z: 600 mm Spindle: SA 40 Spindle speed: from 30 to 2066 RPM Table size: Length 2000 mm x Width 460 mm Spindle motor: 12 CV Scale: 3 axes HEIDENHAIN Centralized lubrication sMachine sold as is, some works required: - freewheel of the advances box to be changed - Y-axis locking system needs to be checked - the ram inverter is non-functional - there is a leak on the spindle deflector - there is a missing pin on 1 gearbox lever Voltage: 380 V Length: 2200 mm (without ends table) Depth: 2000 mm Total height: 2000 mm Weight: approx 4 T