universal tool used for sale

Parallel Lathe SCULFORT type MAXICAP 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With track control Heidenhain iTNC 530 Year of Make: 2005 Travels: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1250 mm x 700 mm clamping surface 3 D Probe Heidenhain Tool measurement in the BLUM Laser workspace Vertical tool changer with 32 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Chip conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions

x-travel: 1000 mm y-travel: 450 mm z-travel: 450 mm table surface area: 1370 x 400 mm number of T-slots: 5 Stck. spindle turning speed range: 32 - 1500 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 50 total power requirement: 7,0 kW weight of the machine ca.: 3,1 t dimensions: 2,1 x 1,7 x 1,9 m Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydraulic tool cutting - Coolant system - Central lubrication The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working area 1Longitudinal700 mmCross420 mmVertical380 mmGeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 10000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmIntegrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-axRotary joint, 4 channelsRotary joint for integrated swivel rotary table with torque drives 4- channe ...

Speed: 355-1800/min, nominal voltage: 380V, 50Hz, 3 AC, control voltage: 220/24V, protection class: IP54, nominal current: 100A, control: Heidenhain TNC 355, weight: 2.95t, with handwheel, coolant system, hose nozzle, hydraulic/lubrication unit, pressure accumulator/ hydraulic accumulator, solenoid valves, Bosch components and ORSTA directional control valve. An on-site inspection is possible.

- Include computer system and computer desk Currency: MYR PIC:  - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my

BERNARDO URS 1000 N universal grinding machine was built in 2021 in Austria by PWA Handelsgesellschaft m.b.H. It is an extremely versatile machine for precision grinding of both cylindrical and internal surfaces with a maximum length of 1000 mm. The best machining results during even the most intensive challenges are guaranteed by the precisely aligned work head with stable grinding wheel spindle. The grinding wheel spindle features adjustable sliding bearings consisting of three segments. It is adjusted hydraulically or manually according to the operator’s needs. Movement in the X and Y axes, in turn, takes place on precision, hand-grooved guides, ensuring high accuracy and smooth movements. The BERNARDO URS 1000 N also stands out for its sturdy, heavily ribbed construction with large panels, which is resistant to temperature fluctuations and deformation. The work table can be tilt ...

This 4-axis AXA USC-2-M was manufactured in 1994. It features a 4th axis with tailstock and a tool magazine with 22 tool positions, enhancing its versatility. Ideal for complex machining tasks, this universal machining centre represents a significant asset for precision work. Contact us for more information about this machine.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain TNC 310 cnc control C and B-axis manual with display swivel rotary table electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 500 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 20-4500 UpM Vorschub / feed 5000 mm/min. Gewicht ca. / weight ca. 2800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle support for SUI 80 longitudinal direction

Model: 6219 - Type: Ridenocciolatrice - Year 2010 - 380 volts - Made in Italy - The Peach Repitter model 6219 feeds, aligns and repits the half-peaches containing whole pits or pit fragments, with a speed of up to 320 half-peaches per minute - The machine guarantees a high alignment efficiency and gentle product handling during the whole process - Reduction of the manpower. Thanks to the automatic alignment system and to the knives repitting device the half-peaches require a minimum working time - Superior quality level. The system assures a high alignment efficiency, guaranteeing a gentle product management during the whole working cycle - Low cost maintenance/Minimum downtime. Due to the simplicity of the design of this multiple lane knife pitter, high mechanical reliability is achieved, guaranteeing an extremely easy intervention - Electric engine 1,5 Kw  ...

This 5-axis DMG DMC80U DuoBlock was manufactured in 2011. It features a maximum workpiece diameter of 800 mm and a height of 600 mm, with a load capacity of 800 kg per pallet. The machine is equipped with a dual pallet system and a rapid traverse rate of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DMG DMC80U DuoBlock universal machining centre we have for sale. Contact us for further details.

This 3-axis MAHO 1600S universal machining centre was manufactured in 1989. It has approximately 38,800 machine hours and was operational until 2025 without notable issues. The machine features a functional coolant system and comes with available manuals and documentation. If you are looking to get high-quality machining capabilities, consider the MAHO 1600S machine we have for sale. Contact us for further details.

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: SIEMENS 840D table - swivable +/-: +110 / -5 ° -C-axis table rotating: 360° tool piece magazine with: 16 Werkzeugplätzen weight of the machine ca.: 3.9 t dimensions of the machine ca.: 2.9 x 2.0 x 2.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Main spindle with drive motor, universal milling head, milling chuck, milling extension, angle milling head, top slide, top slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper tool slide from Mikron VC500D CNC milling machine -Motor: INNDRAMAT 165V 5.5 kW see photo type plate 100C-B050B1-AS03 -Speed: 1500/8000 rpm -Spindle head: SK40 mount -Dimensions: 910/1120/H510 mm -Weight: 365 kg

x-travel: 450 mm y-travel: 350 mm z-travel: 400 mm milling-head swivable +/-: 90° spindle taper: SK40 spindle turning speed - stepless: 10-5000 U/min weight of the machine ca.: 2 t dimensions of the machine ca.: 2.5 x 2.1 x 2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal grinding spindles: . centre height: 125 mm grinding length: 1000 mm grinding wheel diameter: 400 & 225 mm weight of the machine ca.: 3.1 t Internal grinding attachment with grinding spindle Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Tape inserter - Standard Model

- Tape inserter - Standard Model

- Tape inserter - Standard Model

x-travel: 560 mm y-travel: 320 mm z-travel: 400 mm table-size: 950 x 450 mm table load: 300 - 350 kg tool adaptor: ISO 40 turning speeds: 25 – 2000 / 2240 U/min quill stroke: 95-100 mm vertical head swivelling: 90 Grad rapid traverse: 1400 mm/min total power requirement: 2,8 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,8 x 1,6 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 400 mm, 400 mm

MAHO MH 600 E CNC milling machine – used, functional (only for commercial use) For sale is a MAHO MH 600 E CNC milling machine from 1989 in used condition. The machine shows signs of wear and tear according to its age, but is basically in functional condition and is currently under power, so that an inspection and demonstration during operation is possible at any time by arrangement. Technical data: Travels: X 600 mm / Y 450 mm / Z 450 mm Spindle speed: max. 4,000 rpm Tool holder: SK40 Condition / Notes: Machine running and ready for use All axes can be moved Control system functional Z-axis clearly audible during the process (according to the fitter's statement, not unusual for this type) Slipper clutch of the Z-axis is oily and should be replaced when the opportunity arises Note: Sale only to tradespeople Under exclusion of any warranty and guarantee N ...

x-travel: 300-320 mm y-travel: 240-270 mm z-travel: 300-310 mm table-size: 670 x 320 mm tool adaptor: ISO 40 turning speeds: 45-2240 U/min quill stroke: 60 mm head swivability: 360 ° feed: 12,5 - 630 mm/U rapid traverse: 1200 mm/min weight of the machine ca.: 1 t dimensions of the machine ca.: 1,265 x 1,08 x 1,62 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Speed 32 - 1500 rpm Digital display 3 axes Mitutoyo Length 2.60 m Width 2 m Height 2.05 m Weight 3.5 t Color: Green Milling cutters Milling cutter mounts

x-travel: 300-320 mm y-travel: 240-270 mm z-travel: 300-310 mm table-size: 670 x 320 mm tool adaptor: ISO 40 turning speeds: 45-2240 U/min quill stroke: 60 mm head swivability: 360 ° feed: 12,5 - 630 mm/U total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis Quaser MV204U/10 was manufactured in 2002. It features an impressive XYZ travel of 700 x 590 x 400 mm and a maximum spindle speed of 10,000 rpm. The machine is equipped with a 32-tool automatic tool changer and a Heidenhain iTNC530 control system. If you are looking to get high-quality machining capabilities, consider the Quaser MV204U/10 universal machining centre we have for sale. Contact us for further details.

Key data: 600 mm, 560 mm, 520 mm

Inv. Num. : 9131 Type: DMU 60 T Producer: DMG Created: 2001 Parameters: Control system: Heidenhain MILL PLUS Work table length: 1000 mm Work table width: 600 mm Number of axles: 5 pieces X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 520 mm Machine height: 2900 mm Machine length: 2900 mm Machine width: 2200 mm Machine weight: 6500 kg Equipment: Tool Holder

Universal Scooter Manufacturer: Thuringia Model No.: DG-1 with mould changer with leather hard dryer Machine is ready for use. Very good condition. Few operating hours.

A tool milling machine is offered. Travel range X/Y: approx. 400mm/200mm, spindle speed: 224-2240rpm (6 steps), feeds: 0.10-0.71mm/rev, tool holder: MT/SK, control: manual. Equipped with vertical milling head, adjustable compound table, mechanical handwheels. Inspection possible by arrangement.

x-travel: 1250 mm y-travel: 850 mm z-travel: 800 mm Control: Heidenhain MillPlus total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEILER Praktikant 140 B lathe YOM 1991, Serial No. 91-2735 With 3-axis digital readout Heidenhain Centre height 140 mm Swing over bed 280 mm Swing over support 158 mm Centre distance 650 mm Spindle hole 40 mm Spindle speeds 24 to 2500 rpm Tailstock Pinole Ø 40 mm Taper MK 3 Stroke Pinole 85 mm Feeds from 0.02 to 0.63 mm/rev Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible Metric thread pitches from 0.25 to 8 mm Weight approx. 680 kg Accessories: -set of collets -knife holders -x2 jaw-chucks -others The machine has only been used in Germany. Very quiet drives, excellent condition

Universal Filling Device Fritsch UFG-EPA-08RHG-NL20 Year of Make: 2008

Universal filling device Fritsch UFG 8 Year of Make: 1997

Universal Filling Device Fritsch UFG 20-30-8 Year of Make: 2002

Mikron HSM 800 – High Speed Machining Center Year 2007 | Heidenhain iTNC 530 | 24,000 rpm | 3-pallet changer High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC applications such as mold & die, graphite and electrode machining, as well as flexible production. Travels: X 800 mm / Y 600 mm / Z 500 mm with pallet size 800 x 600 mm. Equipped with a 3-pallet changer for efficient automated operation. The machine features a high-speed spindle up to 24,000 rpm with HSK-A63 interface and a 50-position tool magazine. Well equipped with high-pressure through-spindle coolant (18–70 bar) including band filter system, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating viewing window and probing system (M&H). Additional features include APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum proces ...

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ...

Key data: 762 mm, 508 mm, 508 mm

Inv. Num. : 9164 Type: UMC 750 Producer: HAAS Created: 2022 Parameters: Operating hours: 4060 h Table diameter: 500 mm Maximum table load (even): 300 kg Number of axles: 5 pieces Maximum spindle speed: 8100 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm Machine weight: 6464 kg

POS PosMill Typ 1100 3-axis CNC milling machine Vertical CNC machining center with a machine table size of approx. 1,050 x 600 mm. Equipped with a HEIDENHAIN TNC 430 CNC control. Automatic tool changer. Equipment: cooling system with through-spindle coolant (IKZ), hydraulic system, and chip conveyor.

Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible.

This 3-axis HERMLE U 630 T was manufactured in 1999. It features a Heidenhain TNC 415 control system, ensuring precision and reliability in operation. The machine is in very good condition and fully operational. If you are looking to get high-quality milling capabilities, consider the HERMLE U 630 T universal milling machine we have for sale. Contact us for further details.

Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. The machine comes from a well-groomed operation and impresses with the proverbial micron precision as well as the generous working range (up to 900 mm travel in X). It is ideal for toolmaking, prototyping, training or demanding repair shops. Technical data at a glance (manufacturer's specifications): Working range & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Working spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Main Drive & Feed: Drive power spindle: 11 kW (at 44% ED) / 7.5 kW (at 100% ED) Feed speed (X, Y): 0 – 10,000 mm/min (programmable) Feed speed (Z): 0 – 8,000 mm/min  ...

x-travel: 200 mm y-travel: 200 mm z-travel: 280 mm Control: HEIDENHAIN iTNC 530 table - swivable +/-: -10 / +130 ° -C-axis table rotating: 360° milling head: 42000 rpm tool piece magazine with: 60 Werkzeugplätzen weight of the machine ca.: 5 t dimensions of the machine ca.: 2 x 2 x 2.4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mikron WF 41C CNC Universal Milling and Drilling Machine Professional, extremely robust CNC universal milling and drilling machine MIKRON WF 41C Due to its stable design, the machine is ideal for workshops, prototype construction, maintenance or demanding toolmaking. The machine is equipped with the proven HEIDENHAIN TNC 155 web control system Thanks to plain text dialog guidance, it is extremely easy to program directly on the machine, masters graphical simulations and allows easy loading of external CNC programs via the serial interface (ideal for CAD/CAM use). Technical data at a glance CNC control Model: HEIDENHAIN TNC 155 Operating modes: manual operation (such as digital display), positioning with manual input, single set, sentence sequence, program test (graphic simulation) Interface: V.24/RS-232-C for data transmission Feed Drives & Travel Paths Travel  ...

Universal Tool Milling Machine Fritz Werner Type 5130 Extremely robust and precise universal tool milling machine from the traditional German quality manufacturer Fritz Werner (model 5130) This conventional bracket milling machine impresses with its solid grey cast iron design and maximum reliability. It is ideal for workshops, toolmaking, repair shops, demanding do-it-yourselfers or training institutions. The machine has a swivelling vertical milling head with manual quill feed (perfect for additional drilling work) as well as a mechanical feed gear. An absolute highlight is the retrofitted premium safety spindle protection from Tecno Più Technical data at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Type: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with tightening rod) Table d ...

This 3-axis DECKEL MAHO DMC 60 U was manufactured in 1998. It features impressive X, Y, and Z-axis travels of 600 mm, 700 mm, and 600 mm respectively, along with a maximum spindle speed of 12,000 rpm. The machine includes a robust table size of 630 x 500 mm and a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 60 U mill-turn centre we have for sale. Contact us for further details.

This 5-axis Eumach HSM-5XC was manufactured in 2015, featuring a Heidenhain control unit and a robust 5-axis rotary table with a Ø 610 mm diameter. It supports a maximum workpiece load of 500 kg and offers extensive axis travels (X/Y/Z: 1020/610/610 mm). The spindle reaches speeds up to 14,000 rpm, powered by a 29.3 kW motor. If you are looking to get high-quality milling capabilities, consider the Eumach HSM-5XC machine we have for sale. Contact us for more information.

This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details.

Travel X/Y/Z: 500mm/380mm/350mm, tool holder: SK40, quill stroke: 50mm, speed: 4000rpm, feed: 2m/min, rapid traverse: 4m/min, table dimensions X/Y: 800mm/360mm, max. table load: 250kg. Machine dimensions X/Y/Z: approx. 1650mm/2250mm/1850mm, weight: approx. 1800kg, control: Maho 232. The Y-axis shows a malfunction from a feed rate of 50%. Documentation available. An on-site inspection is possible.

This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 machine hours and includes manuals and documentation. The protective doors are partially disassembled but included. If you are looking to get high-quality machining capabilities, consider the MAHO MH 1000 C/A universal machining centre we have for sale. Contact us for further details.