We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,266 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Test mandrelTechnical specifications:Diameter: 49.999 mmLength: 330.324 mmRecording: ISA 40unusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Deep hole drill make SASSEXTechnical specifications:Drilling depth: 400 mmDrilling diameter: 60 mmTool holder: MK 5Overall length: 590 mmWith- Internal coolant supplyusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
1 lot = 46 broachesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Machine vice mechanical / hydraulic make RÖHM type RBFabr. -No: ID158413 / PTechnical specifications:Jaw width: 160 mmJaw height: 49.6 mmTotal length: 817 mmTotal height: 133 mmTotal width: 240 mmPunching force: 50 kNWeight approx: 60 kgWith- Clamping range 310 mm- mechanical drive with hand crank- hydraulic power transmission via hydraulic unitused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
JUNKER EJ 50 grinding machine Year 2007 55kva 400V 50Hz
used
used
This HAIMER UNO 20/40 Smart Microset Tool Presetter was manufactured in the year 2022. It is equipped with a VIEWSONIC control unit.
used
Minimal diameter of the gear wheel : 350 mm Maximum diameter of the gear wheel : 280 mm Max. thread diameter : 200 mm Min. thread diameter : 3 mm Max. length : 700 mm
used
Max. grinding diameter : 300 mm Max. grinding length : 450 mm Distance between centres : 700 mm Height of centres : 155 mm Tables travel : 550 mm
used
Description: Half round milling cutter, see picture for description Approx. Onsite Dimension. (l x w x h): 200 x 100 x 100 mm, weight approx.: 2 kg
used
Quick-change tool holder, tool holder head, quick-change tool holder -Mounting dimensions: dovetail width 39 mm see photos -Price per piece -Quantity: 3 pieces -Dimensions: 86/38/H60 mm -Weight: 0.8 kg/piece
used
Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm, weight approx.: 10 kg
used
Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg
used
Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg
used
Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg
used
Approx. Onsite Dimension. (l x w x h): 370 x 280 x 100 mm, weight approx.: 5 kg
used
Description: Lot of toolholders , HSK+C 100,  ,40 weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 600 x 800 x 1,500 mm
used
Description: Lot of motorized toolholders  ,  ,  , weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 600 x 800 x 1,500 mm
Description: With HEIDENHAIN TNC 121 path control, linear path control, spindle speed range 0 to 2000 rpm, feed speeds 0.02 to 0.2 mm, with rotary swivel table, see photos for details weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,800 x 2,300 mm
used
Tool holder shaft type: BT 40 Tool holder shaft type:Futter / Chuck Tool holder shaft type:Thermoschrumpfung /Thermal shrinking Big selection of BT 40 Tool holders for sale. All kinds of Weldon, Collet, Chucker, thermal shrinking etc. available.
new
Tool holder type:Collet/ Spannzange ER 40 Tool holder shaft type:ISO 15488-40-A Shank diameter:60 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar 90° rotary tool holder BMT 60 like new and never used. External coolant up to 80 bar.
new
Tool holder type:Spannzange / Collet ER 20 Tool holder shaft type: ISO 15488-20-A Shank diameter:40 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar Straight rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.
new
Tool holder type:Spannzange / Collet ER 20 Tool holder shaft type: ISO 15488-20-A Shank diameter:40 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.
new
Tool holder type:Spannzange / Collet ER 25 Tool holder shaft type: ISO 15488-25-A Shank diameter:40 mm RPM of rotary tools:6000 1/min ratio:1:1 Coolant trough compatible up to:80 (ext.) bar Straight rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.
new
Tool holder type:Spannzange / Collet ER 25 Tool holder shaft type: ISO 15488-25-A Shank diameter:40 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.
new
Tool holder type:Weldon 16 mm Tool holder shaft type:DIN 69880 E2-40 x 16 Shank diameter:40 mm length:75 mm 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.
used
measuring range X-axis:1 mm measuring range Y-axis:1 mm Table dimensions:1 mm 100 % before loading warranty: none used tool presetter, make ZOLLER, type EG 1500, year of production 1985
used
tool taper:ABS-100 VDI
used
measuring range X-axis:150- 300 mm measuring range Y-axis: mm Table dimensions: mm measurement range Z =:450 mm enlargement:20 X fine adjustment:+/- 5 mm compressed air:6 bar dimensions:2 x 1,5 x2 m machine weight ab.:150 kg
used
tool taper: 40 shaft cross cut:40 appr. 40 pieces axial driven tool taper with various cutters Used with Gildemeister GDM CNC lathe Sale as complete package or single, min. 5 pieces Price offered for complete package
used
tool taper:50 weight:0,04 t
used
tool taper:40 weight:0,1 t Appr. 60 ISO 40 NC arbors with various clamping shafts Package selling or individual possible, min. 5 pieces
used
length:610 mm width:500 mm height:1800 mm weight - pallet system:30 kg
used
max. grinding diameter:50 mm grinding length:250 mm workpiece length:300 mm total power requirement:0,7 kW weight of the machine ca.:330 kg dimensions of the machine ca.:1000 x 1000 x 1400 mm
used
pitch taper:50 Aufnahme Detailed price on request depense on version and nos. ca. 500 - 1500 EUR + VAT /piece Diverse toolholders matching SCHIESS-VTL´s with SK 50 taper and T-slot clamping design! Diverse fixed boring bars in different dia. and length. Diverse boring bar adapter plates to adapt different boring bars. Diverse normal toolholders for toolshank 40 mm in version left or right
used
length:1000 mm width:800 mm height:1050 mm weight:200 kg Schubladenschrank mit 5 Auszügen Mit AMF Spannsystem Elementen
used
length:720 mm width:780 mm height:1050 mm Weight:150 kg
used
tool clamping area:diverse mm weight:0,1 t appr. 45 ISO 40 arbors, package or single sale
used
tool clamping area:ISO 50 mm weight:0,15 t appr. 70 ISO 50 arbors, partly with cutters for sale single or in package
used
tool clamping area:ISO 50 mm weight:0,4 t single or package available. - appr. 75 tool arbors ISO 50 with partly tooling
used
weight:0,04 t Tool taper:CAPTO tool taper:ISO 40 appr. 60 ISO 40 NC tool holders with appr. 50 x C5 Capto, 5 x C6, 7 x C4. 10 x shaft bore For sale as package or individual
used
length:650 mm width:600 mm height:800 mm weight approx.:50 kg
used
length:710 mm width:720 mm height:1000 mm weight:150 kg Tool cabinet with 8 drawer misc. parts
used
steel cabinet with diverse SK 40 toolholders
used
24 pieces drillholder for INDEX MS32 / MS42 tool holder 1 inch Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
used
Equipped with aluminum case, 66-piece milling set
used
used
Equipped with aluminum case, 66-piece milling set
used
Tool grinding machine, drill bit grinding machine, grinding machine; -Manufacturer: FAMO Fr. Aug. Münzenmaier Maschinenfabrik; -Type: ST/100V; -1 disc diameter approx. 320 mm; -1 cup discs diameter approx. 240 mm ; -Table: approx. 550 x 340 mm.
used
Equipped with diamond discs