universal tool grinding used for sale

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M6 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M6 EW22° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M7 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Table surface: 300 x 1300 mm Table movement x: 950 mm Table movement y: 220 mm Table movement z: 400 mm Spindle intake: MK 5 Spindle speeds: 25-1200 rpm Prests lengthwise & across: 7.5-635 mm/min Presens vertical: 3-250 mm/min Electr. Connection: 380 V, 7.5 kW Space requirement: 1670 x 1500 x 1750 mm Weight: 2600 kg

Table clamping area: 560 x 240 mm x-way: 300 mm y-way: 275 mm z-way: 200 mm Spindle holder: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 750 kg

Code 61044 Description Toolroom millingmachine Make MACMON Type M 100 E Serial no. 1176 Year 1984 Table size 600 x 215 mm Longitude traverse table (X) 310 mm Cross traverse millinghead (Y) 170 mm Vertical traverse milling head (Z) 340 mm Spindle taper 40 ISO 16 Spindle speeds: H / V 40 - 2000 rpm 16 Feeds: longitude and vertical 9 - 450 mm/min Spindle motor 1,3 and 1,8 kW - 380 Volts Dimension L x W x H 1,1 x 1,1 x 1,4 meter Weight 750 kg Accessories Universal millinghead with quill of 70 mm Coolant Condition Machine is in good condition

x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm weight of the machine ca.: 6,5 t CNC Steuerung Heidenhain TNC 426 Kühlmitteleinrichtung Spänewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WE OFFER VERY NICE CONDITION - MIKRON WF3 S technical details: X-travel longitudinal 500 mm Y-travel cross 500 mm Z-travel vertical 380 mm spindle speed 12-steps 50-2240 UpM /rpm feed 1-750 mm/min spindle taper SK40 table size 800x445 mm drive capacity 7 kW weight 1650 kg

Universal milling machine UF20 LVQE Table Y 320 mm X 1200 mm Z 800 mm Table length 1.55 m Speeds: 45 - 2000 rpm 16 A 380 V Length 1.30 m Width 1.20 m Height 1.90 m Swivel head Coolant pump Feed Accessories

x-travel: 900 mm y-travel: 630 mm z-travel: 500 mm table-size: 1200 x 600 mm spindle taper ISO: 40 turning speed range: 20 - 6300 U/min feeds longditudinal/cross/vertical: 2 - 4000 mm/min rapid motion -longitudinal/cross/vertical: 10/10/8 m/min numbers of positions in the tool changer: 22 quill stroke: 100 mm total power requirement: 20 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: 4 x 3 x 2,4 m electronic hand wheel: cooling equipment: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. in condition from seller! 33.01 392 with CEE plug and cable 3-D trace control Heidenhain TNC 425 22 fold toll changer colour graphics vertical head with hydraulic tool clamping fix table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 420 mm, 250 mm, 350 mm

with Heidenhain TNC 114 digital display Tool holder ISO 40/M16 Travel X/Y/Z 420 x 250 x 350 m 12 spindle speeds from 50 - 2240 Weight approx. 900 kg Central lubrication Bellows NEW! Accuracy in: X-axis 0.005/300 mm Y-axis 0.006/250 mm Z-axis 0.01/300 mm Spindle concentricity 0.003 mm Angular accuracy 0.01/250 Spindle clearance X 0.12, Y 0.04, Spindle noise: very good Very good overall condition!

Key data: 310 mm, 170 mm, 340 mm

Built in 1990, with 3-axis digital display. Spindle holder ISO 40, travels 310 x 170 x 340 mm, 16 spindle speeds from 40 - 2000 rpm, 16 feeds from 9 - 450 mm/min, motor power 1.2/1.8 kW, weight 700 kg. The machine is in good condition.

x-travel: 725 mm y-travel: 525 mm z-travel: 505 mm table-size: 1000 x 500 mm table load capacity: 500 kp spindle taper ISO: 40 quill stroke: 80 mm spindle turning speed range: 25 - 5000 U/min voltage: 400 V tool changer made by:: Kelch 20-fach CNC-control: PHILIPS 3460 power capacity - milling spindle: 10 kW total power requirement: 18 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 2,60 x 3,80 x 2,35 m Rigid machine for heavy machining. Machine was last time under power 8 years ago. Machine parameters must be reloaded to RAM. Machine is sold as it is (not working), no guarantee. For spare part use or reconditioning / retrofit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 525 mm, 200 mm

Tool Milling Machine - Universal DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial No.033 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled Machine is sold as a defect

x-travel: 600 mm y-travel: 600 mm z-travel: 460 mm total power requirement: 4 kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 7 kW weight of the machine ca.: 1.8 t required space: 2.3x2x2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:600 mm y-travel:500 mm z-travel:450 mm weight of the machine ca.:3,5 t

x-travel: 1000 mm y-travel: 500 mm z-travel: 700 mm table surface area: 1250 x 700 mm spindle taper ISO: 50 spindle turning speed range: 20 - 3200 U/min quill stroke: 100 mm semi-automatic operated: Phillips 432 Number of working hours: 62.340 h main drive motor: 22 kW total power requirement: 27 KVA weight of the machine ca.: 7,7 t base area: 3,8 x 4,1 x 2,4 mm accessories:: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Rotary axis as 4th axis with housing of the working area The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

Key data: 630 mm, 500 mm, 460 mm

Speed range: 31.5 - 3150 rpm Control Heidenhain TNC 155 Feed speed: 1 - 3000 mm/min. in rapid traverse X -Y: 6000 mm/min. in rapid traverse Z: 4000 mm/min.

Mikron WF 32 CH universal milling machine Machine with chips and splash guard cabin Equipped with a Heidenhain TNC355 controller Specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travel: X 560 mm Y 500 mm Z 400 mm Clamping area: 530 x 900 mm Rapid traverses : X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 – 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg More items - new and used - can be found in our shop! International shipping costs on request!

x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm total power requirement: 2 kW weight of the machine ca.: 660 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 450 mm z-travel: 150 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 500 mm z-travel: 500 mm total power requirement: 24 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m M I K R O N (Switzerland) CNC Controlled Universal Milling Machine with Tool Changer Model WF 54 VH CNC Year 1991 Serial No. 5110302 ________________________________________________________ Table travel, X axis, longitudinal 710 mm Table travel, Z axis, vertical 500 mm Milling head travel, Y axis, cross 500 mm Mounting height below vertical spindle, approx. 600 mm NC rotary table 800 mm Resolution of rotary table, C axis 0.001 ° Spindle taper SK 40 Spindle speeds, 3 steps, infinitely variable 10 - 6,300 rpm Feeds, XYZ 2 - 4,000 mm/min Quickfeed, XY 10,000 mm/min Quickfeed, Z 8,000 mm/min Spindle drive, approx. 15 kW Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 7,000 kg Accessories / Special Feat ...

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm table-size: 700 x 200 mm spindle taper ISO: 40 turning speed range - horizontal: 150 - 1660 U/min turning speed range - vertical: 110 - 1230 U/min quill stroke: 120 mm spindle drive: 3,0 kW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 1,31 x 1,38 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Digital Travel paths X/Y/Z: 400 x 200 x 400 mm Table size 700 x 330 mm Tool holder ISO 40 Vise, hydraulic Refurbished in 2019

Univ. swivel, tilt and turn table presumably DECKELUniversal tool milling machine attachment tableTable size: 700 x 400 mmGroove width: 14 mmGroove spacing: 46 mmMounting plate: width 550 mm x height 300/240 mm- Swivel and tiltable +/- 30- Rotatable 360Weight approx. 140 kg; used

Univ. swivel, tilt and turn tableAttachment table for Univ. tool barrel machineTable size 630 x 250 mmGroove width 14 mmRotatable and tiltable +/- 30Swivel +/-45- 4x T-grooveWeight approx. 120 kg; used

Univ. Swivel, Tilt and Turn Table DECKELUniversal Tool Milling Machine Attachment Table suitable for FP 2L or FP 3L or FP 4LNr. 2314-0301 Year of construction: approx. 1975Clamping surface: 1000 x 520 mm- 6 clamping grooves 16 mm, distance 90 mm- Clamping plate can be rotated horizontally to the right and left up to 45 degrees- Tiltable from/to the machine +/- 15 degrees- Swivel +/- 15 degrees- Swivel table, tilting table, angle tablePermissible load max. 1000kgWeight: 400kggood condition; used

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

Universal face and boring head LENZ type LPA 1SSpindle tool, spindle head similar to WOHLHAUPTER UPA3Tool holder: SK 40 - M16Adjustment accuracy: 0.01 mm- Accessories as shown- Storage boxWeight: approx. 5 kggood condition; used

Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible.

Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible.

x-travel: 710 mm y-travel: 600 mm z-travel: 500 mm NC-rotary table: 630 mm spindle taper: SK 40 spindle turning speed range: 18 - 6300 U/min control: DIALOG 4 feed: 2 - 3600 mm/min rapid traverse: 6 m/min table load: max. 485 kg quill stroke: 80 mm spindle drive: 9,5 kW total power requirement: 20 kVA weight of the machine ca.: 4,6 t dimensions: 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition: in working order Availability: immediately Location: Thuringia / Arnstadt approx. table 600 x 400 mm approx. travel distances X / Y / Z: approx. 400 / 320 / 410 mm approx. spindle holder SK 40 Approx. spindle speeds 45 - 2240 rpm approx. drive power 4.9,kw approx. weight 2000 kg

Macmon M100 Universal Milling Machine with Vertical Head -Milling spindle -Number of spindle speeds: 16 -Spindle speeds: 40, 63, 80, 100, 125, 160, 200, 250, 320, 400, 500, 630, 800, 1000, 1250, 2000 rpm -Spindle Inner Taper: ISO 40 -Collet bore up to: 25 mm Ø -Spindle block -Spindle block displacement by hand: 170 mm -Vertical milling table -Size of the clamping surface: 640 × 195 mm -2 T-slots, width/spacing: 12 / 90 mm -Longitudinal movement automatic/manual: 290 / 310 mm -Vertical movement automatic/manual: 310 / 340 mm -Feed gearbox -Number of feeds: 16 - Feed size (mm/min): 9, 14, 18, 22.4, 28, 35.5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 450 -Motion spindles -Longitudinal movement of the table (1 turn): 5 mm -Vertical movement of the table (1 turn): 2.5 mm -Spindle block movement (1 turn): 2 mm -1 graduation line (longitudinal and vertical): 0.02 mm -1 G ...

x-travel: 1000 mm y-travel: 500 mm z-travel: 650 mm tool taper: SK 40 quill stroke: 100 mm turning speed range - power take off spindle: 40-2000 U/min Feed: 5-2000 mm/min Rapid movement: 4000 mm/min Control: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad ...

YEAR 2001 ; The AM 02 Universal is an electro-pneumatic universal wire stripping plier, for the fast and reliable processing of bulk insulated Z+F terminals from 0.5 mm² to 2.5 mm² (AWG 20 – 14) with a crimping length of 6 mm to 12 mm. Optional additional tool kits are available for 0.34/4 mm² (AWG 22/12). Auction-ID: A1-46617-50

Universal horizontal milling machine – FRITZ WERNER German-made machine tool renowned for its robustness. Universal horizontal milling machine ideal for surfacing, grooving and tooling work. Heavy cast iron construction for excellent stability. Features: Brand: Fritz Werner Type: Universal horizontal milling machine 3-axis cross-table with rotation Horizontal spindle with cutter holder Prismatic slides Integrated mechanical feed box (gears visible in photo) Siemens motor with 400–500 V power supply Manual handwheel controls Disassembled side cover supplied with the machine Complete machine with levers, handwheels and guards Estimated dimensions: Table: approx. 700 × 250 mm Estimated weight: 900 – 1200 kg Status: Antique but functional machine, ideal for mechanical workshop, restoration, or machine tool collector. Wear consistent with age. Auction-ID: A3-43535-33380

Hours: 48690 - Spindle hours: 13465 - Max. table load: 1,000kg - Machine weight: 6,000kg - Incl. 117 tool holders – HSK40 - incl. all descriptions - incl. programming manual – Heidenhain - Incl. 2 machine vices - Incl. 1 rotatable vice - Incl. set of collets ER40 - incl. clamping claws, etc. - Incl. pressure load cell for tool measurement Auction-ID: A1-47017-62

Included Content Technical Data Description: Tool cabinet with tool holders and milling accessories Usage: Accessories for universal milling machines Suitable for: probably DECKEL FP series Execution: Steel cabinet with drawers and tool storage Condition: used Configuration Various tool holders available Milling mandrels and slip-on mandrels included Clamping devices and small tools included Several adapters and tool holders available Extensive stock of accessories according to photos Sold in the condition shown Auction-ID: A7-47277-3040