universal cnc milling used for sale

Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling: 0 - 3 mm -Drive: 0.45 kW -Angle: adjustable -Dimensions: 485/345/H250 mm -Weight: 18.2 kg

Tool holder, milling holder, milling tool -Number: 3x SK40 holders -various: versions -Sale: only complete -Weight: 6 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -1x holder: Ø 27x 85 mm -1x holder: Ø 70 x 220 mm -Sale: only complete -Weight: 18 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Recording inside: Ø 28 mm -Weight: 2.9 kg/piece

Technical data of the FPT Pragma M40 mobile column milling machine used: Longitudinal travel: 4000 mm Vertical travel: 1600 mm Transversal travel: 1200 mm Working feeds: 0-15000 mm/min Fast feed: 30000 mm/min Maximum thrust on axes (X,Y,Z): 2000 from N Spindle motor power (continuous service S1): 28 kW 38 hp Spindle motor power (intermittent service S6-60%): 35 kW 47,6 hp Constant torque spindle speed range: 0-312.5 g/min Spindle speed range at constant power. 312.5-5000 rpm Maximum spindle torque (continuous service S1): 856 Nm Maximum spindle torque (intermittent service S6-60%): 1070 Nm Supply voltage: 50Hz Current consumption: 119,2A Total installed power: 65 kW 88,4hp

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 278 by 218 mm 38 mm high -Drawing: in the photos -Dimensions: 450/95/H295 mm -Weight: 13 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 145 by 185 mm high -Drawing: in the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 290/90/H210 mm -Weight: 14 kg

x-travel: 3.000 mm y-travel: 2.500 mm z-travel: 2.475 mm w-axis: 800 mm rotary table: Juaristi MG-12 Rotary table surface: 2.000 x 2.500 mm T-slots: 11 T-slot - width: 170 mm table weight: 8.000 Kg table rotation: B- Achse – 0,001 ° Control: HEIDENHAIN i TNC-530 diameter of quill: 130 mm speed: 3.000 U/min tool taper: ISO 50 DIN 69871/1-B milling head: swivelling +/-: 2,5/2,5 Grad spindle drive: 30 kW transmission ratio: 2 speeds:: 0-2.500 U/min boring spindle: D`ANDREA UT5-800-S mm/min diameter: 800 mm cross travel: 250 mm Tools changer: 30 pos. Internal cooling system: 20 bar Chip coveyor: Inkl. handwheel: HEIDENHAIN HR-420 weight of the machine ca.: 45 t dimensions of the machine ca.: 9800 x 7320 x 5500 m -TS-3 head, TS-5 column and longitudinal bed INCLUDED: - Part touch probe RENISHAW RMP-60 - External coolant - 20 bar Internal coolan - protecting guards - mobile operator platfo ...

Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Swallowtail: 102 by 126 mm by 20 mm high -Drawing: in the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 180/70/H140 mm -Weight: 6.9 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 315 by 255 mm 40 mm high -Drawing: in the photos -Number: 2x counter bearings available -Price: per piece -Dimensions: 560/200/H285 mm -Weight: 20 kg

Key data: 7000 mm, 1600 mm, 800 mm

Complete system with all the accessories necessary for installation and operation, Travel x = 7000 y = 1600 z = 800 / transverse stroke w = 600mm / General overhaul 2007, year of production 1991: New Siemens Sinumerik 840D control system, new drive motors, guide guides refurbished, new control cabinets. ECOCUT 1 was then operated for only a few months / Travel speed 12000 mm / min / w axis 6000 mm / min turntable TDV 2 max. workpiece weight 6t / clamping surface 1000x1000 turntable TDV 3 max. workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angle crank / chain tool change system / plate field / complete housing / Knoll hopper feed / suction / coolant system with belt filter All BWF fixators for the installation of machine bed and plate

SPECIFICATIONS: Machining length: max. 2500 mm Machining width: max. 350-900 mm COMPOSITION: Station I: Milling machine right-left (2 x 11 Kw) Station II: Milling machine right-left (2 x 5.5 kW) Station III: Grinding unit right-left (2 x 3.7 kW) Station IV Grinding unit right-left (2 x 3.7 Kw) EQUIPMENT: 8 pushers for machining 1 hydraulic pump 1 control box 1 control panel 1 protective grille

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 265 by 215 mm, 30 mm high -Drawing: in the photos -Number: 2x counter bearings available -Price: per piece -Dimensions: 390/130/H260 mm -Weight: 30 kg

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 275 by 220 mm, 40 mm high -Drawing: in the photos -Quantity: 1x counter bearing available -Price: per piece -Dimensions: 450/110/H300 mm -Weight: 12 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 160 x 3.5 mm -Dimensions: 200/85/H70 mm -Weight: 2.5 kg

Double Column Machine SNK RB-7VM Year 2007 5 axis control (X,Y,Z, Wm, Ws) FANUC 18i-MB Bet Column : 4100 Table : 6000 X 3500 XYZ: 6250 x 4500 x 600 W: 2100 Main axis / Quil: 90/ 300 40~8000 rpm ATC :40, AAC Angular Attachment : (L=300)

Tool holder, milling holder, milling tool -Number: 8x SK40 holders -1x: Tapping chuck, compensating chuck -35: Mount MK2, compensating chuck -suitable for: tool changer -Sale: only complete -Weight: 58 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Drawers: 2 -Storage: 1 -Brackets for: SK40/SK50 milling holders -Dimensions: 660/1030/H1200 mm -Weight: 190 kg

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK4 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 6 recordings available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 3.0 kg/piece

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 75 to 90 mm, 15 mm high -Bore: Ø 55 mm -Drawing with the photos -Dimensions: 130/70/H150 mm -Weight: 10 kg

Stable milling machine - Made in Taiwan - New - unused 3 Axis Digital Display - Heidenhain Scales Electronic handwheel for driving machine ashes by hand Tool spindle vertical and horizontal Tool holder steep taper 50 Max. spindle speed 1,600 rpm Travel X 1100 mm Travel Y 720 mm Travel Z 780 mm Table clamping surface 1500 x 450 mm Max. workpiece weight 1000 KG Rapid traverse of the machine axes 6000 mm/min Infinitely variable axle feed can be adjusted via potentiometer Coolant system Chip protection on the router table

Tool holder, milling holder, milling tool -Number: 4x holder SK40 -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 5 kg

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Ø 56 x 110 mm -Ø 46 x 130 mm -Ø 52 x 90 mm -Ø 42 x 80 mm -Ø 42 x 55 mm -Ø 32 x 60 mm -End milling cutter -Price/Sale: complete -Total weight: 24 kg

Tool holder, milling tool holder -Number: 13x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 54 kg

Tool holder, milling tool holder -Adapter -Recording: SK50 -Recording tool: 2x MK3 1x MK2 -Drill chuck reducing sleeves spindle tool -Price/Sale: complete -Weight: 9 kg

Tool holder, milling holder, milling tool -Number: 17x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -is only sold complete -Weight: 70 kg

Tool holder, milling tool holder -Number: 9x SK30 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -with transport box -Price/Sale: complete -Weight: 10 kg

Tool holder, milling tool holder -Number: 4x SK40 recording -various versions -Collet: Ø 8/10/12/20 mm -Sale/Price: complete -Weight: 4 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 45 mm -Assembled tool: Ø 75 x 50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 6 kg/piece

Tool holder, milling tool holder -Recording: SK40 -Tool holder: Ø 28 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 60/60/H210 mm -Weight: 1.5 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 31 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 220/95/H95 mm -Weight: 3 kg/piece

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 210/95/H95 mm -Weight: 3 kg

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK2 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 190/95/H95 mm -Weight: 3 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 40 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg

Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 32 kg

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Drill chucks: Surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Weight: 24 kg

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK4 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 1 recording available -Dimensions: 230/95/H95 mm -Weight: 3.2 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available Price: per piece -Dimensions: 220/95/H95 mm -Weight: 4.5 kg/piece

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/320/H540 mm -Weight: 58 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 x 55 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 27 x 60 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 250/95/H95 mm -Weight: 3 kg/piece

Tool holder, milling tool holder -Number: 8x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 26 kg

Tool holder, milling tool holder -Number: 14x SK50 recording -Tool holder: Ø 36 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H650 mm -Weight: 62 kg

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H740 mm -Weight: 66 kg

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK3 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 12 recordings available -Price: per piece -Dimensions: 235/95/H95 mm -Weight: 3.0 kg/piece

Tool holder, milling holder, milling tool -Number: 2x SK40 holders -Adapter -Take: SK40 -1x mounting tool: Ø 13 x 22 mm -1x mounting tool: Ø 27 x 55 mm -suitable for: tool changer -Sale: only complete -Weight: 3.4 kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -Inside mount: Ø 36 x 90 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 5.4 kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -1x recording inside: Ø 28 mm -1x recording outside: Ø 40 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 4.5 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -Adapter -Adjustment: SK50 -1x tool holder: MK3 -1x tool holder: Ø 20 mm and with CNC pull studs -suitable for: tool changer -Sale: only complete -Weight: 6 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -Adapter -Adjustment: SK50 -Tool holder: MK3 -Total length: mm -Sale: only complete -Weight: 4.8 kg