univer used for sale

A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible.

Cone wrapping machine TOP Universum LWT 3/60-40J for all spears such as Kornspitz and pretzel sticks, etc. Universal - Combi - Winding Machine for all doughs for wrapping and long rolls robust technology! only DGUV V3 tested by us Connection 400V, 16A-CEE plug Dimensions: 1650 x 1000 x 1950 mm, WxDxH Used machine overhauled & SAB service Visit our large exhibition!

Overview The labeler was manufactured in 2012 by the German manufacturer Krones. The machine was regularly maintained by OEM and is still in operation till early 2027. As the selling mineral water company is receiving a completely new bottling line, they are selling the used machines of their current line, which are still in good shape. With the two labelling stations, the machine can label front, back and neck. A date coder is included and installed on the machine. Technical Details Output: 20,000 bph Formats: 0,25l Vichy 0,5l 0,7 and 0,75l GDB and Schlegl Pitch circle diameter: 600 mm No servo drive of the plates Infeed and output direction 90° Rotation: counter clockwise 36,000 operating hours Glue pumps included working direction: counter clockwise

Complete industrial Rademaker dough processing / sheeting line / rollout line with universal line, designed for the continuous production of flat dough sheets, followed by cutting into uniform square portions. Products like Puffy Pastry dough, croissant dough and Dansih patry dough sheets can be produced on this line. Line availabe for sale because of change of production., Working principle:, Feeding of thick laminated dough slabs, gradual reduction via multiple gauging / pressing stages. Formation of a continuous dough sheet, cutting (slitting) longitudinal dough strips then cutting them, with a cross cutter, into its final shape. To prevent the dough sticking to the conveyor belt a continuous flow of flour is added in different stations. The line has an automatic removal and collection of excess dough for reuse. The last part of the line is a 4 meter processing zone which can be used  ...

Used P.E. 4 station labeller machine - Year 2000Technical Specifications & Performance DataThis automatic adhesive labeling machine is engineered for precise, repeatable label application across multiple bottle formats in beverage production and industrial packaging environments. Manufactured by P.E. Labellers, the UNIVERSAL/MASTER/S model from 2000 features four coordinated stations managed by a PLC control system, delivering consistent positioning and high-quality results typical of second hand bottling equipment.Manufacturer: P.E. LabellersModel: UNIVERSAL/MASTER/SYear: 2000Labeling method: Adhesive (pressure-sensitive)Number of stations: 4Control system: PLCContainer types: Designed for PET and Glass bottle handlingFormat compatibility: Supports multiple bottle formats with straightforward changeoversMachine category: Labeling MachineAdvanced Automation & Control SystemsThe PLC-drive ...

Used PE Universal M Labellers machine 10000 BPHTechnical Specifications & Performance DataThe P.E. Labellers Universal M is a robust cold glue labeling machine designed for high-quality application of pre-cut paper labels on glass containers. Built in 2002, this second hand unit delivers reliable performance for beverage production and industrial packaging environments. With a compact footprint and carousel design, it integrates easily into a used bottling line or operates as a standalone labeler.Manufacturer: P.E. LabellersModel: Universal MType code: 8T/770/3S-3FYear of manufacture: 2002Production speed: up to 10,000 bottles/hourContainer material: GlassLabel type: Pre-cut paperLabeling method: Cold glue applicationNumber of plates: 8Rotation direction: CounterclockwiseLabel stations (magazines): 2Dimensions (L x W x H): 1850 x 1800 x 2300 mmWeight: 2150 kgElectrical supply: 400 V, 3 P ...

This 6-axis Universal Robots UR10 was manufactured in 2014. It features a load capacity of 10 kg and a working range of 1300 mm, making it suitable for various applications. If you are looking to get high-quality collaborative robot capabilities, consider the Universal Robots UR10 machine we have for sale. Contact us for further details.

Schmedt PraMelt OT30 Universal glue - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Schmedt PraMelt OT30 Universal glue Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Schmedt PraMelt OT30 Universal glue Price: 250 EUR Download PDF Schmedt PraMelt OT30 Universal glue PräMelt OT30 Universal is an animal glue for the production of book covers with a relatively long reaction time (for a gel hot melt glue) and medium-fast adhesion. Operating temperature approx. 55 – 60 °C Weight: 100 kg. Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newslette ...

Used Make up Line Rheon Condition: Used, fully operational / in working condition Location: Ukraine For more detailed information, photos, or videos, please feel free to call or message us directly.

A Krones rotary labelling machine with neck band is available. Labelling method: cold glue, containers: wine bottles/sparkling wine bottles, max. labelling capacity: 7000bottles/h, machine dimensions X/Y/Z: approx. 1650mm/1250mm/1700mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.

Size: 550 mm Technical details: Speed: 120 Tacts er minute Equipments: Kallfass Universa 500 Servo Fully automatic, continuous side welding machine Type: Hybrid side sealer with continuous product flow Product Feed:Simple feeding system, compatible with products of different lengths and automatic production lines Transport:Vacuum conveyor belt Motion Control:SIEMENS® SIMOTION® with servos for all product-related drives Operator Interface:SIEMENS TP 270 touch panel Operation Mode:Continuous product flow with intermittent cross-sealing Kallfass Compact 650 D High-Performance Energy-Saving Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Inchtornado-style Inch hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film  ...

Manufacturer: Mazak Model: Quick-Turn 10/Universal Type of Machine: 2-axis Lathe Year of Manufacture: 1999 Condition: Fully Functional Weight: 2750 kg (6060 lbs) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Universum J. Kasper GmbH Type: LWT 3/80 Prem-50J-EB2W/40 A used Universum cone winder and pretzel roller is currently for sale and immediately available in our warehouse in Bielefeld. Universum Cone Wrapper / Pretzel Long Roller Type: LWT 3/80 Prem-50J-EB2W/40 More information and pictures on request.

Used Used labeller P.E. Universal/Master M/S 12.000 bph: Year: 2007 Condition: As Is EA 624 | LABELLER P.E. Year: 2007 Model: Universal/Master M/S Speed: 8.000 Bph with cold glue 12.000 Bph with adhesive Direction: Counterclockwise Number of heads: 15 Number of stations: 2 adhesive stations 2 cold glue stations Type of appliaction: Front label Back label Sticker Neck Safety protections Code: EA 624 More details: https://bottlingscout.com

Bread roll system Inlet 190cm long and 20cm wide Roller mill adjustable 10-50mm height Output up to approx. 3,000 pieces SQUARE or TRIANGULAR Weight range approx. 5 – 2500gr depending on cutting roller and dough sheet thickness completely stainless steel clad with digital control incl. various cutting rollers Application: e.g. rustic rolls, ciabatta, mini baguette, triangular, etc

Sealer - wrapping machine, Make Kallfass, Model Universa 400 NT, Year 2000, Working width 400 mm x unlimted, Min. Product length 100 mm, Product length Unlimted, Passage height 200 mm, Capacity up to 60 cycles per minute, Working width: 400 mm x unlimted, Min. product length: 100 mm, Max. product length: Unlimted, Passage height: 200 mm, Capacity: up to 60 cycles per minute

turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm workpiece length - max.: 400 mm travel -x axis: 280 mm feed in x - axis: 0,1 - 30 m/min rapid traverse X-axis: 30 m/min travel -z axis: 1150 mm feed range Z-direction: 0,1 - 60000 mm/min rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/min tool turret 12 times: C4 Capto total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.  ...

turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm workpiece length - max.: 400 mm travel -x axis: 280 mm feed in x - axis: 0,1 - 30 m/min rapid traverse X-axis: 30 m/min travel -z axis: 1150 mm feed range Z-direction: 0,1 - 60000 mm/min rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/min tool taper: Capto C4 total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power. The data ...

turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm travel -x axis: 280 mm feed x-axis: 0,1 - 30.000 mm/min rapid traverse X-axis: 30 m/min travel -z axis: 1.150 mm Feed z- axis: 0,1 - 60.000 mm / min. rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5.000 U/min tool turret - number of stations: 12 tool taper: Capto C4 total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power. The dat ...

number: 1 weight: 2,57 kg width: 265 mm height: 250 mm clamping force max.: 3 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 400 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 710 mm table width: 430 mm table load: 0,2 t surface area: 430 x 710 mm no. of flutes: 5 groove width: 14 mm weight of the machine ca.: 250 t dimensions of the machine ca.: 800600700 m No. 5304 Universal table DECKEL 2038 - 500 / FP 3 + 4 Rotation range 360 Tilting range from/to machine 45/15° Swivelling range right/left +/- 45 Transport dimensions approx. 800 x 600 x 700 mm Weight approx. 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis HALTER LoadAssistant Universal Big 70 was manufactured in 2022. It features a robust design with a maximum loading table capacity of 3000 kg and can handle workpieces ranging from 10 to 300 mm in diameter. The integrated FANUC M-710iC/70 robot arm offers a maximum payload of 70 kg, enhancing its versatility. If you are looking to get high-quality automation capabilities, consider the HALTER LoadAssistant Universal Big 70 robot arm we have for sale. Contact us for further details.

Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data Manufacturer / model: Krones PRESSANT UNIVERSAL 1N Machine type: container sweep-off depalletizer Year of manufacture: 2023 Application: depalletizing of glass bottles, several formats Container throughput: 14,000 containers/h (machine setting) Pallet format: flat pallets 1,200 x 1,000 mm Container conveyor height: 1,300 mm Sweep-off station: raised design for container heights above 320 mm, SEW servo drive Discharge t ...

Vollautomatische Seitenschweißmaschine zur Verpackung von Produkten – unabhängig von ihrer Länge – mit Volleinschlag und ohne Folienüberlappung. Mit neuem Querstempel. Fully automatic side sealing machine for packaging products – regardless of their length – with full wrap and without film overlap. With new cross seal bar. Vollautomatische Seitenschweißmaschiene mit Einschweißtunnel - Fully-Automatic Side Sealer Kallfass Universa 400 - Mini 400 Year 2004 - Serial-No. M 05.04.226 Anlage bestehend aus / System consisting of: Handanlage / Hand fed Station MGZ 400 Seitenschweißmaschiene / Fully-Automatic Side Sealer Kallfass Universa 400 Einschweißtunnel / Shrink tunnel Kallfass Mini 400 Technische Daten / Technical Data: Länge Querstempel / Length of cross seal bar 450mm Verpackungsleistung [Takte/min] / Production speed max. up to 85 packs/min Produktlänge / P ...

Overview This SIDEL SBO 20 Universal Combi blows, fills and caps PET bottles in one integrated block. The system was manufactured in 2005 and started production in 2006. It is designed for sparkling mineral water and flavoured sparkling mineral water with high CO2 content in 1.0 l, 1.25 l and 1.5 l PET bottles. A HEUFT Spectrum TX 180 fill-level and cap-presence inspector and a single-lane bottle conveyor complete the scope. The machines are still installed and under power and can be inspected by appointment. Technical data Current capacity: 28,000 bph in 1.0 l, 1.25 l and 1.5 l PET Maximum filler speed: 30,000 bph Application: blowing, filling and capping of PET bottles Products: sparkling mineral water and flavoured sparkling mineral water with high CO2 content Neck finish: 26/22 GME 30.40 Preforms processed: rPET Luxpet Bottle formats: 1.0 l (82.5 mm diameter, 271 mm height) and 1.5 l ...

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

QUASAR 50 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le|L0, strain LC|LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configured "chec ...

The quasar 100 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-confi ...

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

Material: Normal steel Fan percussion More information and price on request The machine is extensively overhauled and then is as new as new.

The quasar 2,5 kN is a product with the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typical obtained from static universal testing machines tensile, pressure and bending - cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configu ...

Maho UIniversaltisch

Kellenberger: 1000 U 125 Machine was totally dismantled and rebuilt from the ground up. All sheet metal and aluminum parts are laminated. Work piece headstock newly stored. Completely overhauled hydraulic, All filter replaced.

Do not buy a used tractor tester 100 kN or smaller: In almost all cases, the electronics for WIN 7 or 10 need to be completely modernized. For the purchase of the used universal testing machines, pick-up, refurbishment and their retrofit, you will receive a new machine (!) from GALDABINI from us Quasar 10 kN latest technology (BECKHOFF electronics) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable 2-acid universal test machine constructed using finite elements FEM Available load cells: 10 N | 20 N | 50 N | 100 N | 250 N | 500 N | 1 kN | 2.5 kN | 5 kN | 10 kN for tests on plastics, rubber, foils, textiles, components, assemblies and much more Very well Made in Italy | Europe, e.g. with German + European quality components + assemblies ergonomic design, flexible, future-oriented design Extreme signal resol ...

Kellenberger Univesalrundschleifmaschine 600 U 125. The machine is in a very good condition, used in addition to several CNC-universal cylindrical grinding machines only for making parts. The term is very low according to the age. Special accessories on request both new as well as offered in the used condition. Machine has a paper band filter. Internal grinding spindles, grinding wheel flanges, clamping device, grinding wheels, etc. on request. If necessary one can be mounted digital display two axes. Display accuracy: o, òó1 and 0.002 mm.

Operating voltage: 400 v Ma.Nr.: 41636 HEIDENHAIN positioning and control TNC 131 / 135 Complete Dokunnetation (operating instructions, technical plans) exists. Errors excepted!

Universal milling machine. Hure head. Table size: 2000x480mm. Longitudinal travel: 1700mm. Cross travel: 400mm. Vertical travel: 575mm. ISO50. Motor power: 20cv. Weight: 5500Kgs. Dimensions: 2550x2380x2680.

Table clamping surface: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm spindle retainer: SK 50 spindle speeds: 56-2800 rpm feeds longitudinal & cross: 10-1800 mm / min feed vertically: 2.5-450 mm / min. Supply: 400 V, 16 kVA kW space: 2000 x 2250 x 2150 mm weight: 4500 kg

Attention: Don't buy a used universal tester / tractor-proof ingenuators: they need (all?) new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – a dead end that costs a lot of money later! A used machine, pick-up, test software update (?), commissioning, modernization is more expensive than a new machine from GALDABINI Quasar 200 kN latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 for tests on plastics, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Quality Components + Assemblies ergonomic design, ...

QUASAR 1200 kN tractor / universal testing machine This is the replacement for an outdated, uneconomical hydraulic tractor testing machine / universal testing machine. Concerns when purchasing a used (hydraulic) universal test machine that will almost certainly be modernized with new electronics for WIN 7 or 10. In addition, used machines often have other (hidden) defects, such as a knocked-out central spindle of the lower clamping head. Quasar 1200 kN with the latest technology (BECKHOFF electronics) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable 2-acid universal test machine designed by finite elements FEM for tests on steel, reinforced steel, screws, wire ropes and much more Very well Made in Italy | Europe, e.g. with German + European quality components + assemblies ergonomic design, flexible, fut ...

Universal milling machine with automatic movement ram. Table size: 1600mmx320mm. Longitudinal travel: 1200mm. Cross travel: 300mm. Vertical travel: 600mm. ISO50. Hure head. Equipped with DRO Fagor.

Universal milling machine. Table size: 1400mmx300mm. Longitudinal travel: 1200mm. Cross travel: 320mm. Vertical travel: 500mm. ISO40. Hure head. Speeds: 12. (40-1800rpm). Motor power: 7Kw.

5-axis controlled milling centre Control: E 160 CNC Work piece clamping: 2 axis cradle type with tool-taper clamping Indexing of work piece cradle (A/B) full rotary and tilting controlled Traverses: X 1050 mm Y 420 mm Z 420 mm Spindle motor rating: 9 kW Spindle speeds to: 4000 rpm Gear steps 2 Torque: 450 Nm Pick up magazine tool positions: 15 with 2 places for extra large tools Tool taper: ISO 40 Equipped with: 2 Axis clamping system for parts, taper ISO 50; Vertical milling head ISO 40; Full guarding; Pick up magazine for 15 tools; VERY LITTLE USAGE AND ONLY WITH CUTTING OILS; Excellent

Universal milling machine with automatic movement ram. Table: 1700x700. Longitudinal travel: 1320mm. Cross travel: 1016mm. Vertical travel: 560mm. ISO50. 18 speeds (28-1800rpm) 18,75 Hp. Weight: 6200Kg.

Universal milling machine. Table size: 1200mmx320mm. Longitudinal travel: 950mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. DRO Fagor.

4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station

Table size: 440 x 1200 mm table movement x: 950 mm table movement y: 250 mm table movement z: 475 mm spindle retainer: ISA 40 spindle speeds: 40-1800 rpm feeds longitudinal & cross: 16-630 mm / min feed vertically: 5.6-224 mm / min. Supply: 380 V, 7.5 kVA kW space: 2150 x 2000 x 2100 mm weight: 2400 kg

Max. testing force 10 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 10 kN (quality class 0.5 from 100 - 10000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle ...