unitechnik used for sale

500 plastic pallet boxes Used goods, see pictures Manufacturer: Uni-Pak Colour grey/black Dimensions: 1200x800x765mm 500 pieces available. Negotiation price: € 30,- net from stock P10271 Larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

used hydraulic power unit with accumulator, for the operation of a screen changer �

Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm, 350 mm, 200 mm

Travel of the axles: X: 300 mm Y: 350 mm Z: 200 mm Weight: approx. 800 kg

feed pressure: 60 bar liter capacity: 40 l power capacity: 5,5 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,2 x 0,8 x 1,55 m No. 4972 Hydraulic Aggeregat 250 l / 60 bar / 40 l/min formerly HEYLIGENSTAEDT Heynumat 10 Drive: 5,5 approx. 300kg ( estimated ) Transport dimensions approx. 1.2 x 0.8 x 1.55 m ( EUR exchange pallet ) Dimension: 1200 x 750 x 1550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2800 mm y-travel: 1000 mm z-travel: 1200 mm table surface area: 2000 x 800 mm rotary table dia.: 800 mm spindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/min max. torque on the spindle: 3000 Nm spindle drive: 30 kW feeds longditudinal/cross/vertical: 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical: 7 m/min control: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mm wotkpiece diameter with 2 vacant positions: 200 mm workpiece length: 400 mm weight of tools max.: 16 kg tool changing time: ca. 8 - 9 sec internal coolant system feed: ja / yes total power requirement: kW weight of the machine ca.: 25,4 t = 5-axis CNC-bed-type milling machine with integrated NC-rotary table and NC-swivelling milling head - Acc.: tool pre-setting device, various tool fixtures, chip conveyor, coolant with high pressure pump ...

bore capacity in steel (diameter): / mm x-travel: 1750 mm y-travel: 1250 mm z-axis: 1250 mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal lathe Harrison M250 - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Universal lathe Harrison M250 Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Universal lathe Harrison M250 Price: 6000 EUR Download PDF Universal lathe Harrison M250 The machine is in very good condition, not used in production. It served as an auxiliary machine in the maintenance department of the printing house. Technical data: Turning diameter over the bed: 280 mm Turning diameter over the slide: 170 mm Turning Length: 680MM Rotation speed: 40 – 1500/9 step U / min Spindle bore: 35 mm Tailstock taper MK: 3 ...

This 4-axis Unisign Univers 4 was manufactured in 2004, featuring X-travel of 1600mm, Y-travel and Z-travel of 400mm each, and a spindle speed up to 9000 rpm. It includes a chain tool magazine with 44 positions and a tool holder type DIN 69871-SK40. The machine weighs 9000 kg and requires a space of 6.5 x 3.5m. If you are looking to get high-quality milling capabilities consider the Unisign Univers 4 machine we have for sale. Contact us for more information.

This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details.

Key data: 1600 , 600 , 500

Unisign Univers 4000 (UV 4000) Chassis CNC Vertical Machining Center Table size (2) 825 x 625 mm. Number of pallets: 2 Travel x-axis 1600 mm. Travel y-axis 600 mm. Travel z-axis 500 mm. 4. Axis (rotary table) NC Maximum table load 600 kg Number of tools in the magazine 51 pieces. Maximum spindle speed 12,000 rpm. Tool holder DIN 69871A CNC control Fanuc 21i MB If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a complete overview of our inventory.

Unibind UniBinder 8.2 binder incl. binder - UniCover Flex and Hard in good condition! The machine comes from an authority Various consumables are supplied with the machine (as shown in pictures): - approx. 1200 Uniflexcover A4 - approx. 250 pcs Unibacover - 91 pieces of various plain hardcovers

General SKU379W1132 LocationBarneveld CEcheck MakeUniequip Main Features MaterialStainless steel Motor0.79 KW Specified Features - Miscellaneous Capacity1500 l. Motor0,79 kW, 1233 watt, 230 volt MaterialStainless steel With jacketcheck General TypeUnichromat 1500 Mach.No.8765 Year of construction2003 Floor space1,45x0,80 m Total height2,08 m Weight250 kg Extra SpecificationsR404a, chamber dimensions 145x128x67 cm, allowable temperature +1°C to +18°CThe Unichromat HO_1500 BEM/S is a two-door chromatography refrigerator with glass doors, 2 double sockets in the interior, 1 reinforced and pull-out stainless steel platform and 2 stainless steel platforms that can be adjusted in height. In addition, both side walls are equipped with a large cable entry of 40 mm. The double-door refrigerator is easy to move thanks to the castor wheels.Temperature range: +1°C to +18°CCo ...

A Unisign CNC 5-axis large-format portal milling machine is available. Portal clearance height: 1200mm, tool stations: 35/53, tool interface: SK50, travel X/Y/Z: 10000mm/2000mm/800mm, table dimensions X/Y: 11750mm/1670mm, max. table load: 2500kp/m², max. table-to-spindle nose distance: 1200mm, main spindle power: 26kW, spindle speed: 6000rpm, feed rate: 24m/min, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 14000mm/5800mm/4000mm, weight: approx. 45t, control: Siemens Sinumerik 840C. Including automatic angular milling head coupling and decoupling, spindle orientation system, rigid tapping, through-spindle coolant, workpiece probing system and two-station pendulum operation. Documentation available. An on-site inspection is possible.

Unicom 6000 groot 5-assig draai- amp; frees bewerkingscentrum (verticaal draaibank met 5-assig freesbewerking) Frezen: - 36 kW vermogen op de spindel - Type: HSK100A - 1 gt; 6000 tpm - 720 Nm - hogedrukkoeling via de spindel 50 bar - Universele frees- en boorkop (2x automatische indexering 2,5°) Draaien: - 70 kW vermogen op tafel - 2 gt; 450 tpm - 25.000 Nm koppel - max swing: dia 2000 mm - max werkstukhoogte: 1330 mm Gereedschapsmagazijn voor draaien en frezen: - Type: HSK100A - 141 posities Tafel: - 3 tafels: Ø 1250 mm / Ø 1600 mm / Ø 1800 mm - automatisch (ont)laden Radio-meetsensor Brankamp botsingsmonitoring Geïntegreerd meetsysteem op de glijbaan Spanentransportband Beeldsysteem met camera en apart scherm Swing over bed: Ø 2000 mm Max longitudinal travel Z-axis: 1000 mm Max cross travel X-axis: 2150 mm Power on the spindle: 70 kW Number of speeds: 2 > 450 rpm (25 ...

x-travel: 10000 mm y-travel: 1500 mm z-travel: 1000 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Copy part head, copy head, part head -Copy head: for lathe -Dimensions: 280/260/H245 mm -Weight: 15.5 kg

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1000 mm Control: Siemens type: Sinumerik 840 D Feed: 5-30.000 mm/min Table area: 2000x2170 mm table load: 1500 Kg/m² T-slots: 22 H9 distance between uprigths: 2500 mm spindle turning speed range: 6000 U/min spindle drive: 36 kW spindle taper: HSK 100 Tool changer: 30 Rotary table: 2000 mm speeds: 250 U/min turning diameter: 2500 mm table load: 10 t Torque: 33000 Nm total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: 8x6,4x4,4 m Gentry gantry milling machine with carousel rotary table Head change station Tool changer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,0 ...

x-travel: 1600 mm y-travel: 400 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ekato Unimix Vacuum Processing System SRT 50 Order# 4808/2, Series# 70888. Year of manufacture 2004 Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete document ...

Homogenizing Mixer Manufacturer: Ekato Unimix Type SRT 50 Order# 4808/2, Series# 70888. Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete documentation in ...

Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE) ...

Manufacturer: Universum J. Kasper GmbH Type: LWT 3/80 Prem-50J-EB2W/40 A used Universum cone winder and pretzel roller is currently for sale and immediately available in our warehouse in Bielefeld. Universum Cone Wrapper / Pretzel Long Roller Type: LWT 3/80 Prem-50J-EB2W/40 More information and pictures on request.

Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available

Amico Uniflair SDC0200B precision air conditioner Model No.: SDC0200B Coolant Type Water Fan/s: Vent. with forward-drawn Shovel Power Voltage Device: 230V/1ph/50Hz SERVICE CONDITIONS Drying Ball Temperature 24.0 °C Wet bulb temperature 17.1 °C Relative humidity 50 % Altitude a.s.l. 0 m Air back pressure 20 Pa Entry Temp. d.Coolant 7.0 °C Outlet temp. d. Coolant 12.0 °C Glycol content 0 % Freezing temperature 0.0 °C Coolant flow rate 1237 l/h Coolant flow rate 0.34 l/s SERVICES AND FEATURES Total cooling capacity 7.2 kW Sensitive cooling capacity 6.4 kW Total net cooling capacity 6.7 kW Net sensitive cooling capacity 5.9 kW SHR 89.0 % EER ( Cooling Capacity / System Power Consumption 13.9 kW/kW Air flow rate of air conditioner (dry) 1600 m³/h Air flow rate of air conditioner (dry) 0.44 m³/s Air temperature outlet/unit outlet 12.9 °C Relative humid ...

Univap TCM/E 5ED Evaporator with electric defrost unit 2021, Evaporator with electric defrost unit, comes with controls and external KD external fridge plant

This 6-axis Universal Robots UR10 was manufactured in 2015. It features a load capacity of 10 kg and a working range of 1300 mm, making it suitable for various applications. If you are looking to get high-quality collaborative capabilities, consider the Universal Robots UR10 machine we have for sale. Contact us for further details.

This 6-axis Universal Robots UR5e was manufactured in 2019. It features a payload capacity of 5 kg and a reach of 850 mm, making it suitable for various automation tasks. If you are looking to get high-quality robotic capabilities, consider the Universal Robots UR5e robot arm we have for sale. Contact us for further details.

An unused collaborative welding robot (cobot) Universal Robots with a Migatronic welding power source is available. 1) Cobot Universal Robots UR10, year of manufacture: 2020, load capacity: 10kg, reach: 1300mm, machine dimensions X/Y/Z: approx. 1600mm/600mm/600mm, weight: approx. 30kg, operating hours: 0h. 2) Arc welding power source Migatronic, year of manufacture: 2020. Documentation available. An on-site inspection is possible.

A used wrapping machine Universum 50/70-3MM EB3 is currently for sale. These and many other machines are immediately available in our warehouse in Bielefeld. Universum 50/70-3MM EB3 Horn Winding Machine Winding Machine - Winding machine for wrapping croissants, croissants, etc. - Machine is completely rebuilt - all straps renewed - 400 volts 50 Hz - Year: 2008

This 6-axis Universal Robots UR10e cell was manufactured in 2020. It features a load capacity of 10 kg and a range of 1300 mm. Weighing 33.5 kg, this robot arm is designed for tasks requiring precision and flexibility. Consider the opportunity to buy this Universal Robots UR10e cell. Contact us for more information.

Used cone wrapping machine Universum 50/70The machine needs to be overhauledManufacturer : Kasper UniversumType : 50/70400 V 50Hz 1,1AAn rollersRoll out croissant pretzel sticks, roll out spots, fold in ribs, roll out pretzel strands and braid strands. The Universum 50/70 croissant wrapping machine is a special machine used in bakeries and pastry shops to shape and wrap croissants or croissants. This machine helps to portion, shape, and wrap the dough for croissants automatically, which makes the process more efficient and faster. The

Cone wrapping machine with dough strand long moulder Universum 40/60 EZ Manufacturer : Universum Type : 40/60 EZ 380 V 50Hz On rollers Roll out croissant pretzel sticks, roll out spots, fold in ribs, roll out pretzel strands and braided strands. Details see picture

A used Universum cone winder and pretzel roller is currently for sale and immediately available in our warehouse in Bielefeld. Universum Cone Wrapper / Pretzel Long Roller Type: LWT 3/80 Prem-50J-EB2W/40 More information and pictures on request.

x-travel: 4000 mm y-travel: 2500 mm z-travel: 1500 mm bore diameter: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The UNION KC 110 CNC boring mill in rigid T-type cross-bed design offers outstanding precision, power and reliability for efficient complete machining of prismatic workpieces. Equipped with a HEIDENHAIN iTNC 530 control, a 110 mm spindle and continuously variable spindle speeds up to 3,000 rpm, the machine is designed for demanding heavy-duty machining applications. With travels of X 2,500 mm, Y 2,000 mm and Z 1,500 mm, the UNION KC 110 is perfectly suited for large-scale machining tasks in modern production environments. Additional highlights include a 60-position automatic tool changer, high-pressure coolant system and an extensive refurbishment package ensuring long-term performance and accuracy. The data for this ad was cr ...

This 6-axis Universal Robots UR10 was manufactured in 2018. It features a maximum payload of 10 kg and an impressive reach of 1300 mm. This industrial robot arm is designed for versatility and efficiency in various applications. If you are looking to get high-quality automation capabilities, consider the Universal Robots UR10 robot arm we have for sale. Contact us for further details.

This 6-axis Universal Robots UR10 was manufactured in 2014. It features a load capacity of 10 kg and a working range of 1300 mm, making it suitable for various applications. If you are looking to get high-quality collaborative robot capabilities, consider the Universal Robots UR10 machine we have for sale. Contact us for further details.

The Unicraft SHT 2000 hydraulic scissor lift table offers a reliable solution for your lifting projects, e.g. for manually feeding whole stacks of timber into a planer or saw. With an impressive load capacity of 2,000 kg and a robust design, this lifting platform is ideally suited for use in industrial environments. This scissor lift table stands out for its precision and user-friendliness, enabling you to lift heavy loads safely and efficiently. With a maximum table height of 1,010 mm, the Unicraft SHT 2000 is the ideal choice for improving your workflows and reducing strain on the machine operator’s back. Technical data: Load capacity: 2,000 kg Minimum table height: 190 mm Maximum table height: 1,010 mm Table surface: 800 x 1,300 mm Cable length: 3 m Safety standard: EN 1570 Drive: Electro-hydraulic Motor: 1.5 kW Condition: New with warranty Condition: Neu Location: Tauber ...

Qty. 1 Second-hand recoiler Mfc.: United Type: Q610 mm Built: 1958 Model: Reversing Coiler right to left Capacity: Max. 45 ton

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 set with fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader All the goods in very good, ready-to-use condition. Special price

We offer you 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 9.74 mm Pin diameter: 4.90 mm Weight: 0.007 Kg / Pcs. To secure the longitudinal beams against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 17.70 mm Pin diameter: 7.86 mm Weight: 0.030 Kg / pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

Code 71145 Description Horizontal table borer Make UNION Model BFT 80 / 3-1 Serial number 18301 / 34 Year 1986 Spindle 80 mm Spindle taper ISO 40 Spindle out (W) 710 mm Table 1120 x 1000 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 2500 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Size L x W x H 5500 x 3200 x 2800 mm Weigth 9 ton Accessoiries Facing head Ø 460 mm with 180 mm stroke 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead Condition Machine is in good condition

Code 61080 Description Horizontal table borer Make UNION Model BFT 90/3 at Serial number 25 742 Year 1979 ( 1980 in use ) Control Heidenhain TNC 121 Spindle 102 mm Spindle taper ISO 50 Spindle out (W) 710 mm Table 1400 x 1250 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm Weight on table 3000 kg 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 3000 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Accessoiries 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead with 600 mm gap

Te Koop: Non return valve - Univam Type: D DN50 PN 6/40

Qty. 1 Second-hand strip rolling mill Mfc.: United Engineering Type: 4-Hi Built: Strip Width: 393 mm (15.5”) Thickness Entry: 4 mm (0.16”) Exit: 1.2 mm (0.05”) Mill Speed: 405 m/min. (1330 Fpm) Strip Tension: 2670 kg (5875 Lbs) Coil ID 406 mm (16”) Coil OD 1448 mm (57”) Coil weight: 3180 kg (7000 lbs)

Post welding wire and electrodes approx. 1,000kg New, unused, original packaged. Posten Welding accessories consisting of Welding dredging roller for inert gas welding machine MIG MAG Predominantly welding wire diameter 1.2mm, per roll 15kg z.B. Union A 600 IG Various electrodes e.B. Nickel A Originally packed in a cardboard box and sealed by welding in kunsstof film. Special price

Layer-reeled solid wire for welding under inert gas in all positions. Shielding gas types: Ar, CO2 / Ar, CO2, O2 / CO2. Welding wire roll MAG wire electrode, unused, original shrink-wrapped in foil, ovp in cardboard! 15kg 1.2mm Manufacturer Union Type A600IG Probably for deposition welding Multiple available. For complete acceptance special price! Special price!

grinding diameter: 1400 mm grinding length: 3500 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310013 Type of machine Super finishing machine Make NAXOS UNION Type WT 140/3500 Build in 1975 Max. grinding diameter 1400 mm Max. grinding length 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.