We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,319 used machines on RESALE, but how to find them? Machine Search
used
Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available
used
Manufacturer | Manufacturer: Uniloy Machine Type | Machine type: BWF 16 E Stations | Stations: Single Station | Single station Year of construction | Built: 2004 – overhauled in 2019 | 2004 – refurbished in 2019 Location | Location: Germany | Germany Clamping force | Clamping force: 160 kN Control Type | Control system: Beckhoff Extruder | Extruder: S 90/24D Extrusion Head | Extrusion Head: Single Head PWDS | Single head PWDS Mold dimensions mm | Mold dimensions mm (A Length / length x B Width / width x C Depth / depth): 520 x 520 x 2x180 Bottle Volume Max. | bottle volume max.: 15 L Screen Language | Monitor language: German / English | German / English Operating hours | Working hours: approx. 3000 | Around 3000 Accessories | Accessories: Conveyor belts | conveyor belts Packing table | packing table Delivery Time | Delivery time: ...
used
Two-station machine up to 3 ltr. Extruder 70/24D. Triple head 85 mm center to center. Moog TMC 3 control. Triple Proportional control for mold / carriage / calibration. Leak test pre-staged
used
Container Size With Actual Configuration: 1 // Number Of Heads: 2
used
Container Size With Actual Configuration: 19 l // Number Of Heads: 1
used
Extrusion blow molding machine for polyethylene and/or polypropylene containers up to 1 liter capacity. Spindle diameter 48 L/D 24 A station. W. MÃLLER single outlet head with thickness regulator. Automatic deburring. Ordered delivery by extraction clamp on conveyor. Integrated pore checker. Incandescent cut.
Two-station machine for stacking canisters up to 10 ltr. Year of construction 2000. With PWDS and SFDR. Clamping force 200 kN. With aftercooling stations and needle bubbles. Also included is the conveyor belt for canisters. Good condition
used
Two-station machine for tanks up to 10 ltr, 2 x 5 ltr, 4 x 2 ltr. with 2 extruders 90/24D, leak testing in the machine, bottle removal with lowering function. Screen in German and English
used
unused machine. Was set up at the customer's site at the end of 2021, some samples were run and then the machine was never used again. Extruder 70/24D, single head, nozzle up to 120 mm. B&R control. All movements proportionally controlled. With waste and bottle conveyor. Optional moulds for 1-tr and 0.5 litre round bottles available
used
MACHINE IS ONLY TESTED, DEMO AND IT IS AS BRAND NEW CONDITION. OLEASE LET US KNOW ABOUT YOUR PRODUCT AND WE WILL TELL YOU IF THIS MACHINE WILL FITS FOR YOURS PRODUCTS. MACHINE IS AWAILIBLE IMEDIATELY. WE ORGANIZE DISMANTLING LOADING TRANSPORT WE CAN ORGANIZE WITH FULL RISK INSURANCE FOR THE CUSTOMER.
used
accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice
used
The machine of the Italian company COMEC model CS 1500 two trolleys for the production of bottles, canisters 0.1 to 2L Forms can be purchased The machine is currently working Possibility of installing a double head Energy-saving inverter installed
used
The machine of the Italian company COMEC model CS 2000 two trolleys for the production of bottles, canisters 0.1 to 2L Forms can be purchased The machine is currently working Possibility of installing a double head Energy-saving inverter installed
used
Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8