ungermann used for sale

Qty. 1 Second-hand cut-to-length line Mfc.: Ungerer Built: 1966 Material: Stainless steel Strip Width: 300 mm- 1500 mm Thickness: 1.5 mm (stainless steel) Cut length: 750 mm- 6000 mm Length adjustment: mechanical Coil weight: 9.000 kg Coil min/max inner Ø: 500 & 600 mm Shear Type: Rotary Hydraulic system Stacker capacity: 2000 ton PLC: Allen Bradley Scope of supply: Decoiler Crop shear Edge trimmer Leveller PVC film applicator Stacker Camera system

Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request

Frequency-controlled drive motor UNGERER Drive test bench Power 0.0540 to 16.4 KW Voltage 28-420 V Speed 10 to 3,000 rpm adjustable motor with - Siemens frequency inverter with SIMOREG K controller - External fans Emergency Out Facility Hand control unit Frequency: Type: SIMOREG K Power 6 KW to 774 KW

Ungerer 1800 x 5 mm Max sheetwide: 1800 mm Max sheetthickness: 0,7 > 5 mm Max speed: 16 m/min Number of flattingcoils: 9+8 rolls (dia 55 mm) Power : 28 HP Weight: 9,7 ton

Ungerer RP 1500 x 3 mm Max sheetwide: 1500 mm Max sheetthickness: 3 mm

A low-tension fabric inspection and shearing machine Unglaub with newly covered transport rollers is available. Working width: 1900mm, material thickness range: 0.2mm-3mm, max. inspection material speed: 40m/min, inspection material groups: I-IV. Documentation available. An on-site inspection is possible.

Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

plate width: 1650 mm plate thickness: 3 mm straightening roll diameter: 45 mm support rollers: 140 Stk : 17 Stk : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This drive box from GTS Antriebstechnik was used in the Ungerer cut-to-length line.

IBG P/N11278-S/N 101 3.1. Physical Specifications Dimensions (L x W x H): approx. 0.85 m x 0.52 m x 0.55 m Weight: approx. 60 kg (of which 5 kg for the eddyliner®) 3.2. Power supply Mains voltage: 230 V, Frequency: 50 Hz, Power consumption: 300 VA, Pre-fuse (max.): 16 A, Power supply: IEC C13 plug according to IEC 60320 3.3. Operating conditions Ambient temperature: 15 °C to 40 °C, Humidity: max. 80% RH (non-condensing), Operating altitude: max. 2000 m Environmental conditions: Clean, oil- and dirt-free environment 3.4. Component Specifications Shaft geometry: Diameter Ø10 mm – Ø15 mm (without cone or groove), Length 80 mm – 150 mm Specified component types (at the time of receipt and delivery): Ø10 mm and Ø12 mm () --

8 pieces, diameter approx. 70 mm, length approx. 1,300 mm

8 pieces, diameter approx. 70 mm, length approx. 1,300 mm Auction-ID: A1-46666-551

2 pieces, diameter approx. 50 mm, length approx. 1,740 mm Auction-ID: A1-46666-550

9 pieces, diameter approx. 75 mm, length approx. 1,850 mm Auction-ID: A1-46666-552

Meat Grinder S32F Unger system 5 tools Manufacturer: Sind Model: S32F Dimensions: 600x550x1000 mm Electric power: 1.5kW Capacity: 500kg/h

Meat Grinder Unger system 5 tools Manufacturer: Sind Model: S32P Dimensions: 800x600x1000 mm Electric power: 3kW Capacity: 800 - 1,000kg/h

RECON - with uncooled seat rings ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Width: 36mm -Bore: Ø 13 mm -Total dimensions: 160/110/H70 mm -Total weight: 7.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece unstepped top jaw set -Width: 40 mm -Bore: Ø 17 mm -Total dimensions: 140/120/H70 mm -Total weight: 7.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Width: 50mm -Bore: Ø 17 mm -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 180/150/H80 mm -Total weight: 13.3 kg / 13.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Type: FWB 315/425 -Width: 36mm -Bore: Ø 13 mm -Total dimensions: 145/110/H62 mm -Total weight: 6.3 kg

This SiteLight 2G package includes a complete set of 96 new, previously unused LED mesh modules , including packaging. The modules originate from a uniform SiteLight setup and are based on the 2G generation with LED mesh technology. They were originally designed for use as a media façade and construction site communication solution †for example when mounted on façades, scaffold tubes, or high-rise formwork in combination with protection screens such as Xbright. This makes them particularly suitable for projects that require large-scale LED surfaces on buildings or construction sites. 💡   The modules have not been individually tested prior to sale and are therefore offered as untested stock . This means that the modules may work, but this cannot be guaranteed . No statement is made regarding the actual functionality of individual panels. 🔍 Deliver ...

This SiteLight 2G package includes 96 used LED mesh modules , offered as a complete set including packaging. The modules originate from a connected SiteLight system and are based on the 2G generation designed for large-scale LED mesh applications. They were originally intended for use as a media façade and construction site communication solution †for example when mounted on façades, scaffolding structures or high-rise formwork in combination with protection screens such as Xbright. This makes them suitable for projects requiring extensive LED surfaces on buildings or temporary installations. 💡   The modules have not been individually inspected before sale and are therefore offered as untested used equipment . Some panels may be functional, but this cannot be guaranteed. No statement is made regarding the actual functionality of individual modules. 🔍 ...

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelmig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

High-performance mixer-grinder, ideal for use in supermarkets and the meat industry, combining good mixing and grinding. - Supplied with two motors that can operate independently of each other, adapting to the needs of the product. - Built-in mixer-grinder in 18/10 stainless steel. - Gear driven gearbox. - Three-phase motor for grinding:-PM 32-98: 5,5 HP (4 KW) -PM 42-130: 13 HP (9,2 KW). - Three-phase motor for mixing:- PM 32-98: 1 HP (0,75 KW) - PM 42-130: 1,5 HP (1,1 KW) - Cutting head made entirely of stainless steel. Available in ENTERPRISE one cut (1) in PM 32 and PM 42 models, UNGER two cuts (2) in PM 98 and PM 130 models and UNGER three cuts (3) in PM 130 model. - Automatic feeding:- PM 32-98: 90 litre bowl - PM 42-130: 130 litre bowl - Automatic reversible mixing blades. - With optional motherboard sensor. - Optional foot switch. - Optional shock ...

Professional meat grinder Duker Rex is designed for fast and efficient grinding of fresh and slightly frozen products with high capacity and reliable performance. This model is equipped with an automatic feeding worm system that enables continuous and even product transfer to the grinding unit, ensuring stable operation and high productivity. The large 120 liter hopper allows processing of bigger product quantities without frequent refilling, while the production capacity of up to 2000 kg/h makes this machine an excellent solution for intensive professional use. It is suitable for processing meat, poultry, fish, vegetables and other food products. The model uses the Unger cutting system with a 130 mm plate diameter, ensuring precise and high-quality grinding with a uniform final product texture. Stainless steel construction provides long service life, high hygiene standards and easy ma ...

KT Mixer Grinder LM-98 / A, New machine, perforated disc diameter 98 mm, motor 3.0 kW + 1.1 kW Year of manufacture 2011, Unger cutting system (5 pcs), bowl 80 l, hourly output (meat grinder) approx. 1000 kg / h depending on the size of the perforated disc. KT Automatic Mixer Grinder LM-98 /A new machine, hole plate diameter 98 mm, motor 3,0 kW, mixing motor 1,1 kW year of construction 2021,cutting system - unger, loading funnel 80 ltr, grinding capacity approx. 1000 kg/h depending on the hole plate.

42 x SFS smart prop plus 20-300 new a 31,90EUR/St. â?¬1339,80 = 1 x Doka stack frame new 130,00 EUR 42 x SFS smart prop plus 20-350 of new 36,20EUR/St 1 x Doka stacking rack new 130,00EUR Number of ungebgrenzt / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and failover

Seydelmann ME 130, mixing grinder, hole plate diameter 130mm, Unger cutting system, working worm 2 speeds, 1 mixing speed, safety grid. You are very welcome to test the machine in our facility in Koblenz, Germany.

MADO MEW 620 Automatic Grinder, performance 1400kg/h, bowl capacity 35kg, stainless steel construction, Unger Cutting System reduces handling and minimizes heat rise. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Drawing blades serve as tools for the fine removal of chips, for removing old paint layers and for cleaning contaminated surfaces. Pull blades are usually not functional when purchased, but only a piece of steel sheet. In order to function, a fine ridge must first be sanded. We offer fully functional drawing blades of 0.4 mm and 0.5 mm Swedish steel for new purchases. If necessary, we will gladly grind your "used" or "new" drawing blades and let them come back to you functionally. Contact us. We would be happy to provide you with a new range of re-energised blades - ground or unground and/or a grinding offer. We would be happy to provide you with further information regarding drawing blades.

K+G Wetter Electric-Grinder D 114mm with sorting device, year 2007, with unger cutting system. You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Seydelmann grinder WD 114, built in 2015, meat grinder completely stainless steel, incl. Unger cutting set, hole plate diameter 114 mm.

MADO MEW 725 automatic grinder, including lifting device, two feeding worms, one working worm, cutting set Unger 5 pcs., including key for the removal of the working worm

Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querforma ...

Registereinschneidemaschine - Index Cutter Hunkeler RE 320 Serial-No. 4852/15 Schnittlänge maximal 320mm / Cutting length max. 320mm Schnitttiefe maximal 80mm / Cutting deep max. 80mm Schnittdicke maximal 10mm / Cutting thickness max. 10mm Buch dicke maximal 50mm / Book thickness max. 50mm Messe Geschwindigkeit 70Hub/minute / Knife speed 70stroke/min. Motor Bremsmotor 1,5PS / Motor - brake motor 1,5 PS Außenmaße: / Machine Dimensions: Länge 950mm / Length 950mm Tiefe 820mm / Deep 820mm Höhe 1370 mm / High 1370mm Gewicht ungefähr 380KGS / Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Meat grinder Seydelmann AE130/3 in a good used and functional condition. made entirely of stainless steel. Angular wolf / automatic wolf, 130mm unger system, 2 speeds. Dimensions B/T/H 110/110/150 cm. Connection values 400 volts, 45 A. Workshop-tested, ready for immediate use. Further on request.

Manufacturer: Schleicher Promodul UNG 230 mit<CRLF>11 Stück Access Modulen 1 Rack Access und XCX 700, Sale without warranty: 11 Stück Access Modulen , No right of return: 1 Rack Access , Installation height: XCX 700,

Complete single layer concrete tile/slab production plant Press K754 (750 tons pressing power) Longinotti 4 station Molds for 40 x 40, 30 x 30 , 60 x 60, 60 x 30 and 60 x 40 Separate flat stack unloading and loading One Head calibrating machine 6 head diamonds Calibration 10 head polishing line CTM semi automatic palletiser 60 stacks steel frames Tables, turners, dryers etc Unused turner from the press to the pick up station for ungrinded pavers. Press is 2017 Grinder is 2018 The machines will be available for extraction from April 25 Complete production line for single-layer concrete slabs, terrazzo slabs, etc. Press K754 (750 tons press) Longinotti 4 stations Moulds for 40 x 40, 30 x 30, 60 x 60, 60 x 30 and 60 x 40 Separate flat shelf wet / dry 1-head calibration machine 6-head diamond calibration/grinding 10-head polishing machine CTM semi-a ...

oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel  ...

Tensile testing machine Manufacturer: Karl Frank GmbH Type: 81559 Year of construction: 1980 Duck test: height: 1000mm, width: 400mm, depth ungraenzt Force ranges: 2000N, 1000N, 500N, 200N, 100N, 50N Original price at that time: 49.855,00 DM ATTENTION: The device has not been tested for functionality. All information without guarantee

Technical data Capacity: 1050 kg/hour Mixing volume: 90 litres Cutting device: B98, Unger 5-piece (3 discs, 2 knives) Power: 4 kW Dimensions: Dimensions between pictures! Weight: 400 kg

Seydelmann WD 114, 114mm tamping grinder, outer surface, funnel, screw housing, and screw stainless steel, ejection device for screw and cutting set manually operated, cutting set Unger D 114, perforated disc diameter 114 mm, sorting device optionally available

For Ungerer cut-to-length line Auction-ID: A1-46666-558

Main features : -Model: PM; -Floor model; -AISI 18/10 stainless steel construction; -With transmission system in operation (gear transmission); -2 separate motors; -Automatic feeding with 90 l. bunker; -Stirring paddles with automatic reverse; -"Unger" system - 5 instruments; Technical data : -Dimensions L / W / H: 770 / 1145 / 1325 mm.; Productivity: 1050 kg./hour; Grinding motor power: 4 kW; Stirring motor power – 0.75kW; Neck: 98 mm.; Weight: 400 kg.; The price includes a complete set of grinding tools - 2 knives, kidney, grid 3mm., 4mm., 6mm., 7.8mm., 10mm;

New meat grinder Braher P82 Main features: -Made entirely of stainless steel AISI304; - The machine complies with CE norms regarding hygiene and safety; - Unger system - with three tools: kidney, knife, grid + 1 grid gift from "MM Service" EOOD; -Neck: 82mm.; -Productivity: 250÷300kg/h; -External dimensions: 325/550/350mm.; -Weight: 39 kg.; -Power: 1.5 kW, 3N, 50Hz;

For Ungerer cut-to-length line Auction-ID: A1-46666-559

For Ungerer cut-to-length line

For Ungerer cut-to-length line

Series No.: W30644, from Ungerer cut-to-length line, as good as new in wooden box