un used for sale

This 5-axis DMG DMC 100 H was manufactured in 2006. It features a Siemens 840D powerline control with Shopmill, and robust traverse paths of 1000 mm in X, Y, and Z axes. Equipped with a high-speed range up to 8000 rpm, dual gear stages, and an HSK 100 tool holder with up to 360 positions. Includes two 800x800 mm pallets and a B-axis at 0.001° precision. Contact us for more information about this machine.

Heating power : 7.5 KW Drive : 0.37 KW Medium : Water

New Spindle Oil Cooler for Emco Lathes Year of manufacture: 2023

This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information.

This 5-axis DMG GILDEMEISTER DMC 125U universal machining centre was manufactured in 2004. Ideal for complex and precise machining tasks, it offers enhanced flexibility and performance. Consider the opportunity to buy this DMG GILDEMEISTER DMC 125U universal machining centre. Contact us for more information.

Key data: 800 mm, 650 mm, 550 mm

Universal Machining Center Deckel Maho DMU 80T Year 2000 Control: Heidenhain Running hours: ~ 1,600h Technical data: Spindle speed: 0 - 6,300 min-1 Torque Spindle: Tool holder: SK 40 Number of magazine slots: 24 X-axis: 800mm Y-axis: 650mm Z-axis: 550mm Accessories: - Coolant system - 30 SK 40 tool holders - 1x Machine Vise Machine is in very good condition. Has been used only a little

A fully automatic unscrewing machine M. Adelski is available. Unscrewing heads: 5, capacity range: 2000-12500bottles/h, working height: 1090mm, bottle types: NRW/Euro, bottle volume: 0.5l, machine dimensions X/Y: approx. 950mm/850mm, weight: approx. 1400kg, operating hours: approx. 8500h. Documentation available. An on-site inspection is possible.

6SL3040-1MA00-0AA0 SINAMICS S120 CONTROL UNIT CU320-2 DP SINAMICS Control Unit CU320-2 DP with PROFIBUS interface without CompactFlash Card As good as new. The device was only installed once briefly for testing. Was then replaced by another model. Comes in the box according to the picture, which is not the original box: Sale without warranty. VAT. The price is Euro 250,- + VAT. Pick-up in Bielefeld Jöllenbeck, or free shipping. You will receive replies to messages within our business hours. Mon - Thu 8:00 am - 3:30 pm / Fri 8:00 am - 1:00 pm

Deep Drilling Machine brand Buck Year of construction 2000

Control Heidenhain Mill-Plus Travel X/Y/Z: 500 x 380 x 380 mm Clamping area 500 x 400 mm Tool magazine for 24 Wkz., SK 40 Speed 8,000 rpm NC rotary and swivel table Chip conveyor

MIKRON WF 3 DCM Universal Milling Machine Heidenhain TNC 151 control Table 800x380 mm x-travel 500 mm y-travel 500 mm z-travel 400 mm speed range 3150 rpm drive power 4 kW SK 40 Weight 1700 kg Many Accessories and tools

Offered is a conventional Vernier universal milling machine. 3-axis digital readout DRO. Including swiveling milling head, integrated swivel arm up to 250kg. Inspection by appointment possible.

MAHO MH 1000 C CNC Vertical Milling machine Serial No. 11536 Control CNC Philips 432 Table dimensions 800 x 1.000 mm Cross travel (Y) 600 mm Longitudinal travel (X) 1.000 mm Vertical travel (Z) 800 mm Spindle taper ISO 50 P.D.B. Speed 20-4000 rpm Auto feed 1-4000 Rapid (mm) 10000 Power kW 22 Weight 7.200 kg With assembled copy device. Many Accessories and tools

Hydraulic power unit in mint condition with accumulator for emergency stop operation for opening/closing 2 roller columns (smoothing unit, double trigger, etc.) unused, documents available

Power supply model Trio PS/1AC/24DC/5, used but in very good condition.

General SKU237S136 LocationBarneveld MakeCollette (BE) Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume50 Ltr. Motor10 KW Specified Features - Universal mixer Gral-granulatorVactron Capacity75ltr (nett 50 ltr.) Vessel sizesdia.525x400mm With covercheck Inletdia. 50mm (1x) with funnel, Dia. 35mm (1x) Pneumatic operated outletcheck Outletdia. 140mm With motor10 kW, 415 Volt With variable speed drivefrequency control (variable) With lump breakercheck Rotor speed1500 &: 3000 rpm MaterialStainless steel 1.4401 (316) General TypeVactron GRAL 75 Mach.No.84 MG7527 Year of construction1997 With switchgear(as is) Floorspace1,8x1,0 M Total height2,0 M Weight1200 Kg Extra SpecificationsA mixer-granulator with microwave dryingincluding:vacuum pump Busch type Huckepack 425013 2001microwave generatorthermal oil heater Conair Churchill type TC90a ...

grinding length: 1000 mm centre height: 175 mm b-axis: 1 ° max. dia. of grinding wheel: 500 mm internal grinding spindles: 60000 U/Min c-axis: 0.001 ° weight of the machine ca.: 5.7 t dimensions of the machine ca.: 4.25 x 2.2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details.

This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos with Siemens 840D sl Operate control, integrated ytterbium cw fiber laser, and a compact design with a 4 m² footprint. Ideal for machining diamond tools with dimensions up to Ø 355 mm and 420 mm in length. If you are looking to get high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine we have for sale. Contact us for more information.

Maho MH-C 700 All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Stock number: F977, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Construction: Erecting of plastic bottles etc., Motor: Variable speed, Manufacturer: Groninger, Type: ZSB 600

Stock number: F976, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Construction: Erecting of plastic bottles etc., Motor: Variable speed, Manufacturer: Groninger, Type: ZSK 1500

Stock number: F978, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Construction: Erecting of plastic bottles etc., Motor: Variable speed, Manufacturer: Groninger, Type: ZSK 1500

Width 45 cm Year of manufacture 1997 flexible sword folding unit MS 45 Self-control Delivery date: immediately Price on request. Worldwide Delivery & Installation

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P hi-dyn With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 600 Z 700 Speed range: 0 – 12,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Swivel rotary table 0 630 mm Swivel milling head ( Horizontal + Vertical ) Universal tool changer with 60 magazine positions as a double gripper ( SK 40 ) Full protection cabin with sliding doors and interior lighting 50 pcs SK 40 tool holders IKZ – 40 bar Chip conveyor Rotoclear 3 D Probe Heidenhain Electronic handwheel Operating mode 3 + 4 3-Piece Height Adjustable Machine Shoes Operating Instructions THE MACHINE COMES FROM AN INSTITUTE AND IS IN TOP CONDITION POWER-ON HOURS: 29496 hrs PROGRAM HOURS: 10050 hrs.

REF-2732-2733 BELCA SLEEVE WRAPPER WITH SHRINK TUNNEL Manufacturer: BELCA 1) Sleeve wrapper: • Model: BEP 60 REVISTAS • Serial no.: L-433-E • Year: 2012 • 1 kW/380 V • Sealing bar: 650 mm • Overall dimensions (mm): 1,400 x 1,250 x 2,000 (LxWxH) 2) Shrink tunnel: • Serial no.: L-288-V • Year: 2005 • 17.53 kW/380 V • Aperture: 670 x 380 mm (WxH)) • Tunnel length: 1,030 mm • Overall dimensions (mm): 2,200 x 1,250 x 1,750 (LxWxH) Both machines can be purchased together or separately.

Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

Hydraulic pump: BNK 250, Pump delivery volume: 173l/min, Motor: AC motors FCMP 200L-4/H, Motor power: 30kW, Speed: 1470rpm, Machine dimensions: approx. 2000mm/2000mm/2000mm, Weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Universal lathe STANKO 1M63/1250

serial number: 1068645 x-travel: 2080 mm y-travel: 812 mm z-travel: 750 mm : ja : ja internal cooling: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Additional independent injection unit with its own supply and control system

This 3-axis Auerbach FUW 625 was manufactured in 1997. It features a travel of 625 mm in the X-axis, 525 mm in the Y-axis, and 455 mm in the Z-axis. The machine is equipped with a 20-slot tool changer and operates at spindle speeds ranging from 25 to 5,000 RPM. If you are looking to get high-quality machining capabilities, consider the Auerbach FUW 625 vertical machining centre we have for sale. Contact us for further details.

FAM piston filling machine for pasty products,, below level filling,, rotary machine with 10 stations,, Cylinder diameter: approx. 100 mm, cylinder length: approx. 390 mm,, Piston: diameter: approx. 100 mm, height: approx. 250 mm,, set up for container diameter: approx. 56 mm,, 2 sets of filling nozzles: filling opening 11 and 17 mm, filling tube length: approx. 162 mm,, Plastic conveyor belt, belt width: 85 mm,, Overall dimensions: 2,750mm x 1,500mm x 2,400mm., With pallet with s/s tank and control cabinet,, Internal tank dimensions: Ø 580 m x 690 mm,, Tank dimensions: 770 mm x 600 mm x 1570 mm,, Dimensions control cabinet: 800 mm x 600 mm x 2100 mm, and with trolley with parts,, Dimensions trolley: 1150 mm x 600 mm x 950 mm and pallet with parts,, without a platform, which can be seen in some pictures.

A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible.

Two built-in refrigeration units from the manufacturers Güntner and Riedel are available. Both units have been in storage for a long time and are uninspected. Documentation available. An on-site inspection is possible.

This 5-axis DMG ULTRASONIC 50-5 Linear was manufactured in 2010. It features a traverse range of 500 mm in the X-axis, 450 mm in the Y-axis, and 400 mm in the Z-axis. The machine is equipped with a USB 1818 hybrid spindle, offering speeds from 200 to 18,000 rpm for both ultrasonic hard machining and milling. If you are looking to get high-quality machining capabilities, consider the DMG ULTRASONIC 50-5 Linear universal machining centre we have for sale. Contact us for further details.

Year of construction unknown Impression work Numbering device suitable for GTO 46 4 numbering machines, 7 digits, counting forward Delivery date: immediately from stock

x-travel: 710 mm y-travel: 600 mm z-travel: 500 mm NC-rotary table: 630 mm spindle taper: SK 40 spindle turning speed range: 18 - 6300 U/min control: DIALOG 4 feed: 2 - 3600 mm/min rapid traverse: 6 m/min table load: max. 485 kg quill stroke: 80 mm spindle drive: 9,5 kW total power requirement: 20 kVA weight of the machine ca.: 4,6 t dimensions: 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Stanko 166, 6.3 meter DBC. Completely overhauled in 2024. Electric tailstock. Cable guides installed. Machine in like-new condition. Manual available. Dismantling and loading are included in the price. All headstock components are the same as on the DIP 500. An operator who already operates the DIP 500 can easily operate the 166 DIP 600 without retraining. The machine comes complete with two lunettes, a Ø 300-600 and a new Ø600-1050. Work piece maximum diameter: – above bed: 1250mm – above support: 900mm Work piece maximum length: 6300 mm Spindle speed(rpm): 5…214 Max workpiece weight: 10000 kg Motor power: 30 Kw Machine overall dimensions: – length: 10100mm – width: 2320mm – height: 2000mm Machine weight: 25000kg

x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 830 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a training workshop. Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing Manual The data for this ad was created with ModulMWS - the software solution o ...

Tetra Top Cleaning unit (TTCU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 250 Mini Eifel C38 cartons. The external Tetra Top® Cleaning Unit offers excellent cleaning and disinfection of your hygiene chamber. You can clean and disinfect both sides simultaneously or choose to clean and disinfect one side at a time. One unit is able to clean up to two Tetra Pak® TT/3 filling machines. 3x separate vats for P3-oxonia active S, Mip CA and P3-horolith V. Integrated centrifugal pump (11 kW). Control panel with PowerFlex40 frequency converter and ABB RVG200 operator panel. 6x valves with pneumatic actuator (Air Torque AL-79)., Type of Machine: Cleaning unit, Development step: -0200, Production hours: 1.166 hours, Drawing Spec.: 2866825-0200, Dimensions: 145 X 125 X 295 cm, Weight: 850 kg

Several spare parts for Corazza FD220L machines existing out of:, - Cams., - Holders., - Guiding plates., - Bushes., - Axles., - Toothwheels., Type of Machine: Yeast / Butter Packaging Machine, Dimensions: Box 80 x 60 x 60 cm, Weight: 140 kg

x-travel: 1.150 mm y-travel: 710 mm z-travel: 710 mm b-axis: +30 / -120 ° surface area: 1.500 x 795 mm milling head: universal, stufenlos spindle: 28 kW turning speeds: 20 - 18.000 U/min tool changer: auto. number of tools: 60 Control: HEIDENHAIN iTNC530 weight of the machine ca.: 12 t dimensions of the machine ca.: 6 x 3,2 x 3,4 m CNC universal milling machine in a very stable ‘monoBLOCK’ design, ideal for single-part and small-batch production with swivel spindle, NC dividing head and tool magazine. • NC-swivel milling head hydraulically clampable, with HSK-A63 spindle taper and 18,000 rpm motor spindle • LEHMANN vertical NC dividing head mounted on the machine table for 5-axis simultaneous machining with tailstock • DMG ERGOline® Control with 19 screen and HEIDENHAIN iTNC530 3D contouring control • Production package with RotoClear viewing window, 600-litre coolant tank, ...

Key data: 2000 mm, 6 mm, 10 mm

4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll  mm. 160 - Lower roll  mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system f ...

Stock number: F1127, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Standing: On legs, Construction: Erecting of bottles etc., Dimensions: L 2350 x W 1100 x H 1550 mm., Conveyor: Plastic lamella, Conveyor dimensions: L 1300 x W 82 mm., Manufacturer: M. S. Packaging, Type: FLR 1000, Year: 1999

hobart UXSBÄKO 10A Universal Dishwasher GastroProduct description:usedBakery conditionManufacturer: HobartModel: UXSBÄKO 10A Dishwasher, crate washer, dishes, …the all-round machine with great performance for boxes, trays, dishes, jugs, etc. Power supply: 400V, 50Hz, 15.6kW, 24.4A 3N PHDetails see pictures

Used Universal Dishwashers Decker DishwasherManufacturer : DeckerType : Dishwasher TT3920DECDDyear of construction: 2019For bakeries and butchers/butchersDetails see pictures

Hobart UX 30 ESB Universal Dishwasher Gastro Product description: - used - bakery condition - manufacturer: Hobart - model: UX 30 ESB - universal dishwasher, crate washer, dishes, … - the all-round machine with great performance for boxes, trays, dishes, jugs, etc. - Power supply: - 400 V, 50 Hz, 13.2 kW, 3N PH - Exterior dimensions W.: 77 cm, D.: 84 cm, H.: 195 cm Not tested untested See pictures for details.

A laminar flow unit Bleymehl for aseptic product protection is available. Total air volume flow: 1200m³/h, electrical power: 0.4kW, machine weight: approx. 90kg. Including one replacement curtain. The machine was manufactured in 2005, however only commissioned in 2018. Documentation available. An on-site inspection is possible.