un used for sale

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

Make : Wolf Built: 1993 Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 140 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1100 rpm Sales price: € 2,950,- net, from stock Herzogenaurach We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 kW made of 8 mm steel, incl. Smoke gas heat exchanger 8-pipe system 2.750,00 € Insulation water bath / steam bath made of stainless steel with 30 mm rockwool 1.760,00 € 4 connectio ...

PUR bag melter for processing from 2 to 3 kg PUR-DIN aluminium foil bags, Technical description: Hose connections, temperature controller PT100, 2 internal heating circuits, storage tank approx. 2.8 kg volume for bag change, 1 gear pump 7.3 cc drive via three-phase motor, glue stop shut-off direction, level monitoring for the Bag change with optical and acoustic signal, electronic Control with larsicht input (multilingual), weekly timer, digital inputs and outputs for integration to the mother machine, melting capacity adhesive-dependent, temperature reduction, Operating voltage 400 V Including - Hot glue hose length 3.5m i.D.10mm - Application head large glue outlet 5.6mm probe Pt100 - Homag cover plate QA65 with hose aging re - Switching amplifiers - Teflon probe S-506

Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

Universal milling machine. Hure head. Table size: 2000x480mm. Longitudinal travel: 1700mm. Cross travel: 400mm. Vertical travel: 575mm. ISO50. Motor power: 20cv. Weight: 5500Kgs. Dimensions: 2550x2380x2680.

Table clamping surface: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm spindle retainer: SK 50 spindle speeds: 56-2800 rpm feeds longitudinal & cross: 10-1800 mm / min feed vertically: 2.5-450 mm / min. Supply: 400 V, 16 kVA kW space: 2000 x 2250 x 2150 mm weight: 4500 kg

Bevel-helical gear units Manufacturer: Bonfiglioli Model: A-50 4 UH50 P90 LO E engine: Euromotori 1 .1kw MS9016 Built in 2008 NEW, unused from old stock for further details please refer to the pictures.

Hydraulic

The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...

Used lifting column unloader of the trays with a mechanical device used to unload the container process granules distributed on trays. The device is equipped with a shredder granules. The device has a complete DTR manufacturer. Specifications: max. capacity: 160 kg Tray size: 35x600x1000 mm max. number of trays: 8 max. process container height: 1300 mm prod.1997 year max. External dimensions: height. 3080 mm, width. 1550 mm, 1820 mm length Material: AISI 316 / AISI 304 implementation class: EEx e II T 3

Universal milling machine with automatic movement ram. Table size: 1600mmx320mm. Longitudinal travel: 1200mm. Cross travel: 300mm. Vertical travel: 600mm. ISO50. Hure head. Equipped with DRO Fagor.

Bevel-helical gear units Manufacturer: Bonfiglioli Model: A 413 UH45 P80 LO E engine: Euromotori 0, 55kw MS8026 Built in 2008 NEW, unused from old stock for further details please refer to the pictures.

Machine type water circulation cooling unit Merkle brand Type WK 200 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 590 x 200 x 210 mm Weight 15 kg Age 8 years Condition workshop checked as new Warranty 12 months from the date of delivery Original price 990,00 € + VAT Price 590,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our machine with 0%! We offer you  ...

Make: BITZER Type: S6G-25.2Y Funding volume: 101.1 m3/h year built: BITZER two-stage, 25 KW at minus 35C for freezing, shock freezer Price 3,300,- Info: 0043-6641838175 or info@frigocom.at

HOLZKRAFT raw air extraction system ASA 1901 Product name: Raw air extraction system ASA 1901 Manufacturer: Holzkraft Item number: 5128191 Condition: As good as new technical details: • Filter area: 1.92 sqm • Rated power: 1,900 cbm/h • Chip collection volume: 110 l • Chip bag: PVC d= 414 mm Length x 1,100 mm Width/depth approx. 650 mm • Diameter intake manifold on the device: 203 mm • Diameter intake manifold at the distributor: 1 x 120 mm, 1 x 100 mm • Height filter cartridge: 2,100 mm • Sound pressure level: 85.7 dB(A) Hints: • The system is suitable for milling, planing and sawdust, but not for dust! • By rotating the intake unit by 180°, the suction direction can be done from above or below. This requires light conversion work. Engine data: • Motor power: 1.5 kW • Speed: 2,950 rpm • Power supply ...

Unit set for paint booth with speed control and heat recovery: Make : Wolf, Type 4/B-M Year of construction 2009 Dimensions : 1.5 m x 4.2 m x 3.0 m (approx. WxLxH) Heating unit : 209 kW Burners : oil burners, Weishaupt brand, alternatively gas burners Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 21,200 m3/h; 7.5 kW, 1,500 1/min Exhaust air unit : 21,000 m3/h; 7.5 kW, 1,500 1/min Energy saving : Speed control with frequency converter and heat recovery Pipelines : Supply and exhaust air pipes, deflector hood, air intake hood Electrics : Control cabinet Location : Nuremberg Area Retail price : € 11.900,-, net, ex location

Universal milling machine. Table size: 1400mmx300mm. Longitudinal travel: 1200mm. Cross travel: 320mm. Vertical travel: 500mm. ISO40. Hure head. Speeds: 12. (40-1800rpm). Motor power: 7Kw.

FRIGA SYSTEMS 6H-35.2Y Brand:FRIGA SYSTEMS, BITZER Type:6H-35.2Y Stock number:M22-1301 Cooling capacity:70.0 kW Application:Cooling Number of fans:6 Refrigerant:R449A, R452A Refrigerant Content:55 l Voltage:400 Volts Power consumption:22,5 kW Motor power:25 kW Dimensions:2600 x 1600 x 1670 mm Weight:863 kg Year:2009 Number in stock:1 piece(s) Price:Quotation request Description: Very nice Friga Systems condensing unit, equipped with a Bitzer 6 cylinder piston compressor, condenser (6 fans), fan speed controller, liquid vessel 55 liters and a switch box. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +40°C. Visit also our website: used-refrigeration

Universal milling machine with automatic movement ram. Table: 1700x700. Longitudinal travel: 1320mm. Cross travel: 1016mm. Vertical travel: 560mm. ISO50. 18 speeds (28-1800rpm) 18,75 Hp. Weight: 6200Kg.

According to the description below

Stephan UMHC403E-GNi Pilot Universal Machine with control cabinet Double jacket Steam injection nozzles Knife insert Lid with pressure-resistant closure Feeder containers Steam transfer station Outlet on the boiler electrically driven stirring blade 3 Speeds Machine tiltable Safety device on the lid not functional, machine runs with the lid open Sight glass of the flow meter at the rear of the control cabinet defective Machine should be repainted and overhauled Voltage 400V Fuse: 32A Machine must in any case be thoroughly cleaned before use Video about test run and further pictures available

Universal milling machine. Table size: 1200mmx320mm. Longitudinal travel: 950mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. DRO Fagor.

4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of both screwing units - separately adjustable distance between screwdrivers 250-540 mm - automatic screw feeding - automatic disconnection of the feeder movement - screw depth sensor - foot switch control Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - feed force pressure reducer - additional manual slot for various screws - extended travel +30 mm to 130 mm - laser positioning pointer - screw depth sensor - horizontal pressure

Table size: 440 x 1200 mm table movement x: 950 mm table movement y: 250 mm table movement z: 475 mm spindle retainer: ISA 40 spindle speeds: 40-1800 rpm feeds longitudinal & cross: 16-630 mm / min feed vertically: 5.6-224 mm / min. Supply: 380 V, 7.5 kVA kW space: 2150 x 2000 x 2100 mm weight: 2400 kg

FOR SALE ALFA LAVAL PURIFIER PU 150 COMPLETE UNIT AT TURKEY HAVE A GDY SIR; WE VE COMPLETE USED ALFA LAVAL PU 150 PURIFIER UNIT PURIFIER WORKED IN VERY LESS HRS. TESTED IN WORKING CONDATION.. PU 150 PURIFIER UNIT SER NO. 107338/2009 YOB 2009 440V 60 Hz P 150 SEPARATOR SERIAL No. 4173737 440 V 60 HZ MOY 2008 MADE IN SWEEDEN SEPARTOR BOWL IN VERY GOOD CONDATION. SYSTEM READY TO USE. IF YOU'VE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY

WSM Stationary screwdriving unit screwdriving station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. Functional sequence The station is equipped with the pre-assembled assembly via the transfer belt. The work steps of the automatic station with a run of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled assembly in St.2.1 - Lowering the wearer with the scanner and the vision sensor - Scanning of the 3 codes (front panel, fro ...

Angular swivel unit, Accuracy 0.01°, SW100D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swing angle 180 [°] Torque 15 [Nm] Repeatability +/- 0.01 [°] swivel time 0.5 [s] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Operating temperature 5 ... +80 [°C] Cylinder volume per cycle 108 [cm³] Weight 6.3 [kg] 10 million maintenance free cycles, Positioning 2 positions, e ...

Swivel unit, OSE-A45-8, Schunk, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

- hydraulic inner polishing / smirk - unit - type HAU RPAK 300 - travel left / right: 300 mm travel up / down: 200 mm - mounted on cross slide - manually movable 500 mm (forward / return); 300 mm (left / right)- possibly motorized

System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: UCF 646-00-35 Power: 110 kW Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzung of the root solution to power consump ...

Angular swivel unit, Accuracy 0.01°, SF100-90D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swivel angle 90 [°] Torque 15 [Nm] Energy transmission pneumatic 4 [number] Swivel angle adjustable +/- 3 [°] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Repeatability +/- 0.01 [°] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Nominal operating pressure 6 [bar] Operating temperature min. 5 [°C] Operating temperature max. + ...

RLA 160 Extraction system Dust nozzle diameter: 160 mm Engine: 2.2 kW 400 V 50 Hz Nominal volume flow at the nozzle: 1448 m ³/h Maximum flow rate: 2400 m3/h Filter surface: 9,21 m² Dust class M Residual dust content: H3 Chip collecting volume: 2 x 165 (193) l The maximum sound pressure level: 73 dB (A) Dimensions (L x W xH): 1755 x 830 x 1654 mm Weight: 267 kg G & pieces 5131620

Qty. 1 Second-hand laser tube wall thickness measurement unit Mfc.: MSG Maschinenbau GmbH Built: 2009 Determination of wall thickness using laser technology. Max. loupe dia.: 85 mm (can be modified) Wall thickness: 11 – 14 mm Loupe length: 250 – 600 mm Operation speed: 1.3 m/sec. Power: 6.5 kW, 400 V, 21 Amps., 50 Hz Air pressure: 6.0 bar Scope of supply: Removal device Feeder Saw inlet channel Vertical drivers Vertical & horizontal straightener Heavy-duty metal circular saw Blow-out and suction device Weighing device (calculation) Catchments Loupe crane Suction unit Hydraulic aggregat Collection stand

Filter system for ref. No. 235-1659 with bagging device for big bags L x W x H: 500 x 200 x 600 x cm Weight 2300 kg Built in 1999 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Stock# U2417-1 Used universal mixer/cutter by Robot Coupe (FR) model R60. Machine has stainless steel mixing bowl with internal dimensions: diameter 45 cm x length of straight side 38 cm. Total volume 60 l. Working output - maximal batch for emulsifing 36 kg, maximal batch for chopping - up to 25 kg, maximal batch on dough (60% hydrated) - up to 30 kg. Machine has bottom driven shaft with three cutting curve knives. Shaft is driven by 11 kW el. motor. Working rotation speeds - 1500 rpm and 3000 rpm. Working time cycle adjustable from 1 to 4 minutes. Top is covered with polycarbonate lid, closed on clamp. Missing lid wiper. Manual tilt discharge. Machine is mounted on stainless steel supporting frame. Last time used in food industry

Max. testing force 10 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 10 kN (quality class 0.5 from 100 - 10000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle ...

Max. testing force 5 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 5 kN (quality class 0.5 from 50 - 5000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle ext ...

Built: 1998 Dimensions: 1.15 m x 0.8 m x 2.5 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Umluf fan: 8,000 m3/h; 4.0 kW; 1435 rpm Location : Warehouse Room Herzogenaurach Sales price: € 2,990,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drills  ...

Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

1 unit 2 buckles + 1 unit 2 buckles

Dimensions: L 620 mm x W 330 mm x H 1520 mm Drive: 2,2 KW Speed: 18000 RPM Grinding Chamber diameter: 130 mm Width: 40 mm medium air flow rate: about 2-4 m ³/min. Capacity: from 1 to 50 kg / h-> depending on the material and desired fineness.

Control unit CU320-2 PN. SINAMICS, 6SL3040-1MA01-0AA0, Siemens, mint condition Special price Attention: Original Siemens product, no replica from.. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Control Unit CU320-2 PN, SINAMICS, 6SL3040-1MA01-0AA0, Siemens, - Digital Outputs 24VDC 0,5A - incl. SINAMICS Control Panel 6SL3055-0AA00-4BA0, Siemens, - incl. SINAMICS S120 Compact flash card, Performance 1, 6SL3054-0FC01-1BA0-Z, Siemens, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in  ...

M. No.: 7160013

Injection unit Krauss Maffei size 700 complete with screw cylinder 50 mm Ã?, complete with all valves and servo motor

- 1 outlet nominal power kg/h 800 kg/h engine power 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 72 5 mm width 690 mm Height 1520 mm Weight 75 kg material 1.4301 / AISI 304 Height ejection in 475 mm Supplied incl. sieve 5mm ; New machine - best condition

Mueller Martini 351.0412 unwinding station Built in 2000; working condition