We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,001 used machines on RESALE, but how to find them? Machine Search
used
Including documentation.
used
Stephan Kutter UMB 120 E, motor 30 Kw. + 2 Kw., tiltable, capacity 120 ltr., incl. spare blade 1 set, very good condition
used
Bed milling machine make NIIGATA type 2 UMBFabr. -No: 26064S5316 Year 1973Table clamping surface: 300 x 1370 mmTable movement lengthwise = X: 870 mmTable movement across = Y: 280 mmVertical movement of the milling head = Z: 380 mmmin/max. Distance between table and clamping surface: 50/430 mmDischarge of the milling head: 330 mmSpindle mount: ISA 50Milling head can be swiveled horizontally to vertically12 spindle speeds: 40-1750 rpm9 feeds longitudinal and transversal: 20-800 mm / minvertical: 9-355 mm / minRapid traverse longitudinal and transverse: 3 m / minvertical: 1375 mm / minSpindle drive 380 V: 3.7 kWFeed drive 380 V: 1.5 kWSpace requirement: 2780 x 1750 x 1800 mmWeight: 2400 kgWith- 3-axis digital display- Cooling deviceused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not ...
used
Double knife Motorized scraper Sleeve and valve for air vacuum All stainless steel construction
used
Stephan UMB40 Universal Machine with two speeds 1420/2870 rpm Use of knives as well as additional work Machine tiltable for removing the processed medium Stainless steel bowl Power lever and engine cover should be repainted
used
used
connection value: 380/400 Volt connection frequency: 50 Hz weight: ca. 1.200 kg Heidelberg platen OHT with PRACMATIC conversion for imprinting in roll labels (roll to roll) - from roll to roll - Hot air drying The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
cross-section width:: -- mm cross-section heigth:: -- mm feed:: -- mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description Conversion kit for stitching heads Hohner HK 52-8 to ring eyelets 8mm
used
Description Conversion kit high-speed cutter Wohlenberg from Monitor Tube chassis system 85/86/90 to LCD chassis The following steps are necessary for the conversion to LCD: 1. Disassemble the monitor chassis 2. Remove the picture tube and circuit board (ventilate the tube properly, dispose of) 3. Function keys, alpha keyboard is retained (if available) 4. New LCD chassis, loosen nuts and lift the frame 5. Insert chassis from behind, attach front bezel and screw it in place 6. AMP connector from the CPU unplug, eject contacts 7. Set the voltage on the potentiometer to 12 volts 8. Press in new pins after enclosed pin assignment 9. For System 86/90, pinch off the crimp contacts and insert them into the pin header 10.AMP connector System 85 / Plug in pin header on System 86 11.For System 86/90, tap the voltage on the switching power supply (snap terminals) 12.Settings of the LCD monitor are ...
used
KITAMURA Mycenter H600B Horizontal Machining Center Available 2 machines. Serial No. 45030 & 45031 Control FANUC 11M X/Y/Z- 1016/813/765 Table 630x630 mm Load capacity 1200 kg Index resolution 5° Pallet station Distance table-spindle 20-833 mm Spindle taper NST 50 Spindle speed 20-3500 rpm Rapid Feed 12.000mm/min Cutting Feed 1-5.000mm/min ATC- number of tools 60 Max. Tool size/weight 150 mm/20 kg ATC- umber of tools 60 Spindle motor power 15 kW Machine Weight 14 t
used
POS 1 Dry pigment titanium white rutile R660 Sachtleben stored dry in 25 kg bags. Ideal for artist colours and paint for transport cost reasons, if possible min 100 kg Small delivery quantities may be after consultation Total quantity available: 625 Kg Pucsvm Other dry pigments: Zinc White / 625 Kg Zinc White by ZnO EPM Manufacturer:Umicore Nederland B.V. Ocre jauen 2022 ( yellow ochre N°2022 ) 175 Kg Manufacturer Le Moulin - Couleurs France Ombe naturelle 1066 ( Umbra natur N°1066 ) 175 Kg Manufacturer Le Moulin - Couleurs France Ombre naturelle 1380 ( Umbra natural dark N°1380 ) 500 Kg Manufacturer Le Moulin - Couleurs France Umbra calcine 4 x 25 Kg = 100 KG Umbre calcine E 1102 Manufacturer Le Moulin - Couleurs France Chalk Chalk / North White United Chalk Works Dammann KG
used
Dampfkessel Baujahr: 1986 Neuer Kessel Baujahr 1991 Hersteller: Loos Typ UL SH 14000 Kesselleitung: 8.5 to Dampf/h 6`000kW Betriebsdruck: 16 bar Dichtekontrolle 70 mbar Gas min. 85 mbar Gas max. 170 mbar Neue Steuerung Baujahr 2002 Neue Steuerung Simatic WinCC V5.1 Steuerung HME = Steuerung Alfa / Speisewasser von Enthärtungsanlage Christ (Niveau 11.01 < min Alfa aktiviert Pumpe 11.7 und Ventil 11.71) Steam boiler Year of construction: 1986 New boiler Year of construction: 1991 Manufacturer: Loos Type UL SH 14000 Boiler capacity: 8.5 to steam/h 6`000kW Operating pressure: 16 bar Density control 70 mbar Gas min. 85 mbar Gas max. 170 mbar New control system year of construction 2002 New control Simatic WinCC V5.1 Control HME = control Alfa / feed water from Christ softener (level 11.01 < min Alfa activated) Pump 11.7 and valve 11.71) Die fast neue Wasseraufbereitungs ...
used
Umbalzautomat, Umalzfrasmaschine -Max. Passage height: 120 mm -Spindle diameter: 40 mm Year of construction: 1992 -Weight: approx. 1950 kg -Dimensions: 3500/1900/H1800 mm
used
Stephan UMB25 Universal machine used with two speeds incl. knife insert Machine tiltable for removing the processed medium Bowl made of stainless steel, 25 litres volume for up to 18 litres batches Machine must be thoroughly cleaned before use. the frame and the engine cover should possibly get a new paint neat and smooth running Viedo available via test run
used
Stephan UMB25 Universal machine used with two speeds incl. knife insert Machine tiltable for removing the processed medium Bowl made of stainless steel, 25 litres volume for up to 18 litres batches The machine is in very good condition, but must still be thoroughly cleaned before use. neat and smooth running Viedo available via test run
used
pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm throat: 300 mm stroke: 350 mm ajustment speed: 80,0 mm/sec working feed: 10,0 mm/sec return speed: 58,0 mm/sec dayligth: 450 mm table width: 300 mm work height max.: 1140 mm control: DNC 60 oil volume: 180 ltr. total power requirement: 18,5 kW weight of the machine ca.: 15.500 kg. range L-W-H: 4200 x 2200 x 3200 mm Ausstattung: - elektro-hydraulische CNC Abkantpresse letzte Pressenprüfung - durchgeführt 2022 - CYBELEC CNC Steuerung - Modell DNC 60 PS (Umbau 2012) - schwenkbare Bedienung, Anbauseite vorne rechts - elektrischer Hinteranschlag, mit Kugelumlaufspindeln (X Achse) - elektrisch-pneumatische Höhenverstellung vom Hinteranschlag (R Achse) - manuelle Matrizenverschiebung, inkl. Matrizenschuh - elektro-hydraulische Oberwerkzeugklemmung - elektro-pneumatische Unterwerkzeugklemmung - EHT - geteilte Oberwerkz ...
used
Doppelkopfheftmaschine fuer Broschueren - Block Booklet & Block Stitcher Nagel Multinak-S (18086) fuer Block- und Sattelheftung / flat and saddle stapling Heftkoepfe AS: fuer Blocks bis 15 mm (Heftkoepfe BS bis 27 mm optional) / stapling head AS: blocks and brochures up to 15 mm (stapling head BS: blocks up to 27 mm optional) Heftkopfabstand verstellbar im Bereich von 80 - 155 mm / distance adjustable between 80-155 mm Heftklammernlaenge: 6 - 30mm / staples arm length: 6-30mm Heftklammernsorten: 24, 26, 50 + Ringklammern / for staples no. 24, 26, 50 and ring staples flaches Anlegen der Heftklammern durch bewegliche Umbieger / moveable bending tools ensure that staples lay flat einfaches Kippen des Arbeitstisches ermoeglicht schnellen Wechsel von Block- auf Broschuerenheftung / change-over from flat to saddle stapling is made by simply flicking over the table Maschine ist fuer Dauerbe ...
used
used machining center Brand: KONDIA Model: B700 CNC: Fagor 8025 Table dimensions: 860x400mm Travels (X, Y, Z): 700, 410, 510mm Taper: BT40/ISO Spindle RPM: 8,000 Umbrella type tool changer - 20 Tools Includes 4th AXIS.
used
ZPS VMC 760 machining center with Acramatic A2100 control. ISO40 spindle with gear change, max. 8000 rpm, 7.5kW (11kW Max) Table size 920x470 Racing 762x430x560 Umbrella tool changer with 20 places, some to be revised. Weight: 5500kg, with coolant tank, with chip trolley (no evacuator)
used
Control : Siemens SINUMERIK 840C • Spindle Taper: SK 40 • Magazine: 32 sets • Atc: UMBRELLA TYPE • Table Size: 400 mm x 400 mm • Pallet Changer: Available: Double Pallet • Travel X: 500 mm • Travel H: 500 mm • Travel Z: 500 mm • Table: B Axis: 0.001 Degree (Precision Rotating) • Power Shaft Motor: 35 KW • Spindle speed: 18000 rpm • Cooling through Shaft: Available • Chip conveyor: Available this extra information is standard for this model. Please always double-check the details during a visit The Deckel Maho 50 H is a precision machining center renowned for its exceptional performance and versatility. Manufactured in 2004, this horizontal machining center is equipped with advanced features and capabilities to meet the demanding requirements of modern machining operations. Controlled by the Siemens SINUMERIK 840C system, the Deckel Maho ...
used
ØS Heidenhain 426 Tool tray - umbrella - 20 positions Travel axis X-1000mm, Y-600mm, Z-700mm Clamping table 1300 x 600 mm Number of axes – 3 Machine weight – 5,500 kg Spindle and motor overhaul performed in 8/2023 The machine is functional and in operation, it will be available for collection from February 2024