uf used for sale

Manufacturer: Uffe Sass, Type: Werkstückwender, Year: 1998, Control: no, Work piece width min-max mm: 500-1300, Min.-max. workpiece length in mm: 500-2800, Min.-max. workpiece height in mm: 10-60, Continous adjustable feeding speed m/min: möglich, Feeding engine kw: 2 X 1,0, Working hight mm: max 60/veränderbar, Klemmun Pneumatisch: yes, Single machine: möglich, Machine from production line: möglich, Belt width: 1300, Total lenght: 3000, Feeding speed max m/min: über Umrichter variabel, Working hight adjustable mm: yes, Year :1998

x-travel:3.000 mm y-travel:700 mm z-travel:1.200 mm Spindle RPM:2.500 1/min tool taper:SK50

Knuth UFM 10V Universal Milling Machine Type: Universal milling machine Manufacturer: Knuth Model: UFM 10V X-axis travel: 1300 mm Y-axis travel: 290 mm Z-axis travel: 450 mm T-slot table size: 320 x 1600 mm Workpiece weight max.: 450 kg Dimensions (L x W x H): approx. 1800 x 1500 x 2200 mm T-slots, width: 18 mm T-slots, spacing: 80 mm Upper slide travel: 550 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-14

Infrared switch, infrared sensor with contamination signal WENGLOR UF55PBV 10 - 30 VDC diameter sensor: Ø 30 mm approx. 2 m Connection cable New ! Dimensions(packaging): 135 x 125 x 45 mm

Monitor, TFT-LCD Industrial - Monitor UNIPO UFP 8.4 ( UFP8.4 ) 2TT0801CDN00N 84 - 264 V AC 47 - 63 Hz max. 40 W 8.4 screen spare part for Toyoda HES52 ! used. tested ! Dimensions: 240 x 210 x 185 mm

Including case Auction-ID: A1-41275-399

https://archiv.rme-audio.de/en/products/fireface_ufx.php Sale with the following accessories: - 1x IEC connection cable C13 Auction-ID: A7-45172-22

Laboratory oven, 300°C max temp S/No B214.0887, ANR 2646 Auction-ID: A1-45187-156

Laboratory oven, 300°C max temp, S/No B217.0692, Year 2007, ANR 2921 Auction-ID: A1-45187-155

Filter press plate filter ultrafiltration plate filter used Manufacturer: Rhone Poulenc Type: UFP 70 Max working pressure: 4.5 bar/64 psi Torque: 8 mxkg 6x24 plates approx. 2000 x 600 H 1700 mm Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

We sell 1500 x Atrust Zero Clients, brandnew in original packaging, EU / German systems With this chip: SOC SMSC UFX6000 10/100/1000 Ethernet In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to compan ...

Knuth UFM 2 Universal Milling Machine Specifications X-axis travel (manual) 800 mm X-axis travel 750 mm travel Y-axis 300 mm travel Z-axis 400 mm Table size 1320x320 mm T-slots 5x14x63 mm Feeds Y-axis travel (8) 20 - 360 mm/min Z-axis travel 600 mm/min Spindle speed (12) 58 - 1800 min-1 Vertical spindle taper SK 40 Distance between spindle tip and table 0 - 400 mm Head rotation 45° Cone of the SK 50 horizontal spindle Drive Main engine power 4 kW Motor power in the Z-axis 0.75 kW Feed motor power 0.55 kW Cooling pump motor 0.09 kW Coolant pump capacity 25 l/min Dimensions and weight Dimensions: 1900x1720x1750 mm Weight 2100 kg More items - new and used - can be found in our shop! International shipping costs on request!

Universal milling machine UF20 LVQE Table Y 320 mm X 1200 mm Z 800 mm Table length 1.55 m Speeds: 45 - 2000 rpm 16 A 380 V Length 1.30 m Width 1.20 m Height 1.90 m Swivel head Coolant pump Feed Accessories

Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm -Weight: 80 kg

Inv. Num. : 7155 Type: UR4-4DD-UF6 Producer: HMP Created: 2000 Parameters: Max. diameter: 25 mm Components: Reducing hammers with 4 segments 6-segment roll forming hammers

Capacitive sensor, electronic sensor -Manufacturer: IFM -Product Type: UF66VCF3 -Quantity: 1 available -Price: per piece -Weight: 0.2 kg

sheet width: 1050 mm plate thickness: 1.50 mm daylight opening: 100 mm bending angle max.: 135 ° height: OW 100 mm total power requirement: manuell weight of the machine ca.: 330 kg. dimensions of the machine ca.: 1600 x 900 x 1450 mm Equipment: - robust, manual swivel bending machine - divided upper tool - lower and rear tool Height of upper tool = 100 mm Division 100/100/100/100/100/100/100/70/60/50/40/30/100 left + right with horn tool - upper tool with quick-change system - quick foot clamp - angle stop - lockable - manual rear stop 500 mm - machine can be moved (rollers) - accessories box - rear Pictures show identical machine (UFA 1212) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU445W1480 LocationBarneveld MakeColortronic TypeM253-ST-ÜFS-2.2KW No.69990109 Year of construction1999 Main Features Motor2.2 KW Inlet diameter100 mm Width250 mm Specified Features - Granulator Materialstainless steel 1.4721(heat resistant) Granulatorcheck Rotor width250 mm Rotor diameter160 mm Number of rotor knives3 Number of stator knives:2 With hoppercheck Inletø 100 mm Hinged topcheck Motor2,2 kW (230/400 volt, 1445 rpm) Rotor speed109 rpm Information Mounted on framecheck With switchcheck Weight150 kg Floorspace0,80x0,50 m Total height1,10 m Extra SpecificationsWith S+S metal seperator, type Rapid Compact 100GranulatorsColortronicMills > GranulatorsBrand > Colortronic What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

General SKU445W1539 LocationBarneveld MakeColortronic TypeM253-ST-ÜFS-2.2KW No.69990108 Year of construction1999 Main Features Motor2.2 KW Inlet diameter100 mm Width250 mm Specified Features - Granulator Materialstainless steel 1.4721(heat resistant) Granulatorcheck Rotor width250 mm Rotor diameter160 mm Number of rotor knives3 Number of stator knives:2 With hoppercheck InletDia. 100 mm Hinged topcheck Motor2,2 kW (230/400 volt, 1445 rpm) Rotor speed109 rpm Information Mounted on framecheck With switchcheck Weight150 kg Floorspace0,80 x 0,50 m Total height1,10 m Extra SpecificationsWith S+S metal seperator, type Rapid Compact 100GranulatorsColortronicMills > GranulatorsBrand > Colortronic What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

This ELMAG UFM 125GT was manufactured in 2015. It features a universal milling machine with a spindle Morse taper ISO 40, and a table surface of 1,320 x 320 mm. The machine offers a vertical speed range of 45-1,660 f/p and a horizontal speed range of 40-1,300 f/p. Ideal for precise and versatile milling tasks. Contact us for more information about this machine.

Overview  This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data  Air operating pressure: 5.5 – 8.5 bar Water operating pressure: 3 – 5 bar Condensate operating pressure: up to 10 bar Operating temperature: 4 – 70 °C

Fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, universal reflex sensor, reflex sensor -Manufacturer: Wenglor, fiber optic cable sensor unused in original packaging -Type: UF87PA3 -Number: 3x sensors available -Price per piece -Dimension box: 105/90 / H40 mm -Weight: 0.2 kg / pc.

Fat Baking Machine Jufeba UFD-8 Continuous system / Fat baking machine with skin pass for spritz and donuts Turning device with automatic removal device with grease tank Extractor hood with extinguishing system device Connection 400V, 63A-CEE plug Used machine

MEMMERT UF110 Universal Oven / Incubator / 300 °C / 108 Liters Decommissioned equipment, used only a few times Maximum temperature: 300°C Temperature Range: Ambient + 5°C -> 300°C With forced convection Capacity: 108 Liters 2 stainless steel grids Interior dimensions: 560 x 480 x 400 mm (P minus 39mm for fan) External dimensions: 745 x 864 x 640 mm (WxHxD) 2800 W / 220V Weight: 74 kg Year of manufacture: 2021 Attention, small deformations of the sheet metal of 2 / 3 cm on the oven door (see photos)

x-travel: 16300 mm y-travel: 2600 mm z-travel: 1600 mm Control: Heidenhain type: TNC 430 tool taper: ISO 50 spindle turning speed range: 22-4000 U/min feed in x - axis: 36000 mm/min feed in y - axis: 24000 mm/min feed range Z-direction: 24000 mm/min main drive motor: 37 kW Tool changer: 90 coolant: : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1800 mm y-travel: 1000 mm z-travel: 1000 mm table surface area: 1000x1000 mm turning speeds: 4000 U/min head swivability: 90 ° Tool changer: 45 chip conveyor: control: Heidenhain type: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 1350 mm z-travel: 1400 mm spindle taper ISO: 50 turning speeds: 22-1400 U/min Rotary table: 800x600 mm Table dimensions: 2500x1200 mm Feed: 5-3000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 y-travel: 650 mm z-travel: 542 mm Control: Heidenhain type: TNC 426 table surface area: 800x600 mm c-axis: 1/1000 ° table - tiltable: 45 Grad swing dia.: 1200 mm spindle taper ISO: 40 turning speeds: 0-5000 U/min Tool changer: 30 Pos : chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg

Automatic rebating machine / automatic cross-cutting machine 2 spindles

inner taper of milling spindel: Spannzangenaufnahme collet diameter: unbekannt turning speed range: 1,3 x der Antriebsdrehzah U/min : 165 mm distance spindle - column: ? mm weight of the machine ca.: 28 kg dimensions of the machine ca.: 350350200 mm Shipping weight: 35 kg Packing: ( ca. 400400400 ) mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 y-travel: 650 mm z-travel: 542 mm Control: Heidenhain type: TNC 426 table surface area: 800x600 mm c-axis: 1/1000 ° table - tiltable: 45 Grad swing dia.: 1200 mm spindle taper ISO: 40 turning speeds: 0-5000 U/min Tool changer: 30 Pos : chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC universal milling and drilling center SHW is available. Travel X/Y/Z: 6000mm/2100mm/1500mm, milling head swivel: 180°, rapid traverse X/Y/Z: 8m/min, speed: 4500rpm, spindle power: 31.5kW, machine dimensions X/Y/Z: approx. 11000mm/9000mm/6000mm, weight: approx. 44000kg. Documentation available. On-site inspection is possible.

x-travel: 2500 mm y-travel: 1300 mm z-travel: 900 mm Control: Heidenhain iTNC 530 table surface area: 2500 x 800 mm table load: 5,0 t tool taper: SK 50 DIN69871 spindle turning speed range: 36 - 4000 U/min feed range: 2 - 12000 mm/min main drive: 25 kW total power requirement: 50 kW weight of the machine ca.: 17 t dimensions of the machine ca.: 8,4 x 4,5x 3,8(3,9) m The main engine was overhauled in September 2022 for € 6,000. The machine was partially overhauled in 2007 Scope of overhaul: Feed motors were overhauled New Heidenhain iTNC 530 control system with new main spindle drive (Siemens) Retention of the control cabinet and feed drives Geometric overhaul of the machine Overhaul of the tool changer Defective guideway covers were repaired or replaced The milling head was completely overhauled approx. 3 years ago. Equipment: CNC control Heidenhain iTNC 530 Horizontal/vertical swivell ...

x-travel: 1000 mm y-travel: 700 mm z-travel: 600 mm Control: CNC feed stepless: 2-4000 total power requirement: 20 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 7 lm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 3 t x-travel: 1000 mm : 110 milling-head swivable +/-: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 1.25 mm ST plate width at 30 kg/mm: 2.00 mm ALU thickness at Niro-steel: 0.80 mm VA daylight opening: 100 mm bending angle max.: 135 ° height: OW 100 mm total power requirement: manuell weight of the machine ca.: 350 kg. dimensions of the machine ca.: 1715 x 750 x 1400 mm Equipment: - robust, manual swivel bending machine - divided upper work - lower and rear tool Height of upper tool = 100 mm Division 100/100/100/100/100/100/100/100/100/70/60/50/40/30/100 left + right with horn tool - upper tool with quick-change system - quick foot clamp - angle stop - lockable - manual rear stop 500 mm - machine is movable (rollers) - accessories box - rear The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 450 mm y-travel: 200 mm z-travel: 465 mm total power requirement: 2,6 kW weight of the machine ca.: 1.2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU316W1182 LocationBarneveld MakeHaver & Boecke TypeUFR 219X2900 No.23/191770/02 Year of construction2002 Main Features MaterialStainless steel Length2900 mm Width219 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder diameter219 mm Feeder length2900 mm Closedcheck InletDia. 150 mm OutletDia. 215 mm With vibro motor2x With motor2x 3 kW, 220-240/380-415 volt, 1500 rpm Information Floorspace2,85x0,65 m Total height0,80 m Weight180 kgVibro feedersHaver & BoeckerConveying systems > Vibro feedersBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU316W1181 LocationBarneveld MakeHaver & Boecke TypeUFR 219X2350 No.23/191770/03 Year of construction2002 Main Features MaterialStainless steel Length2350 mm Width219 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder diameter219 mm Feeder length2300 mm Closedcheck InletDia. 150 mm OutletDia. 200 mm With vibro motor2x With motor2x 3 kW, 220-240/380-415 volt, 1500 rpm Information Floorspace2,30x0,60 m Total height0,85 m Weight180 kgVibro feedersHaver & BoeckerConveying systems > Vibro feedersBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

wire diameter 0,8-3 mm spring diameter 50 mm feeding length 14450 mm output pieces/min 125

wire diameter 0,2-0,8 mm spring diameter 20 mm feeding length 3910 mm output pieces/min 220

Milling machine, universal milling machine, tool milling machine, drilling and milling machine -clamping table: 705 x 310 mm -Device table: rotatable/tiltable/swiveling -X/Y/Z travel: 550/340/420 mm -Spindle mount: SK40 -Speeds: from 46 to 2110 rpm -Feed: 12 to 254 mm/min -Pinole stroke: 80 mm -Rapid traverse: mm/min -Coolant device: -Dimensions: 1620/1700/H1810 mm -Weight: 1768 kg

: neu : 2025 : 080093 : prompt, Zwischenverkauf v : Türkei : 5530 € : 106.73 € : 1 : 1050 mm : 1.5 mm : 1 mm : 2.2 mm : 150 ° : 500 mm : 200 mm : 1300 mm : 750 mm : 1515 mm : 280 kg : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 080200 : Mai 2026, Zwischenverkauf : Türkei : 5900 € : 113.87 € : 1250 mm : 1.25 mm : 0.8 mm : 2 mm : 150 ° : 500 mm : 200 mm : 1500 mm : 750 mm : 1715 mm : 315 kg : geteilt, 45° : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:7000 mm y-travel:1200 mm z-travel:1300 mm rapid travel x/y/z:10 m/min table-size:7.200 x 1.000 mm table load:max. 4 t/qm universal head:5 Pos. plus manuell 1° tool taper:SK 50 milling head speed:20 - 2.000 1/min power capacity:30 kW max. torque on the spindle:Getriebe 2 stufig , 1.500 Nm control:HEIDENHAIN TNC 360 total power requirement:50 KW dimensions of the machine ca.:9,0 x 3,8 x 4,6 m weight of the machine ca.:25,0 t universal travelling column - universal milling machine orthogonal milling head with 5 controlled Pos. with M-code and additional 1° indexing, manually in spindle axis, prepared for HSC milling heads incl. torque support, moveable operator-cabin/panel, chipconveyor, incl. controlled security fence, miscellaneous accessories (angle milling heads, vices...) on request still under power in closed factory

x-travel:16300 mm y-travel:2600 mm z-travel:1600 mm spindle taper ISO:50 spindle turning speed range:22 - 4000 U/min rapid traverse:24 / 36 m/min main drive:37 kW total power requirement:50 kW with CNC HEIDENHAIN TNC 430 automatic Universal Milling Head automatic toolchanger 90-pockets coolant attchament and chip conveyor