uf used for sale

Filter press plate filter ultrafiltration plate filter used Manufacturer: Rhone Poulenc Type: UFP 70 Max working pressure: 4.5 bar/64 psi Torque: 8 mxkg 6x24 plates approx. 2000 x 600 H 1700 mm Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

x-travel: 16300 mm y-travel: 2600 mm z-travel: 1600 mm Control: Heidenhain type: TNC 430 tool taper: ISO 50 spindle turning speed range: 22-4000 U/min feed in x - axis: 36000 mm/min feed in y - axis: 24000 mm/min feed range Z-direction: 24000 mm/min main drive motor: 37 kW Tool changer: 90 coolant: : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm -Weight: 80 kg

Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg

Fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, universal reflex sensor, reflex sensor -Manufacturer: Wenglor, fiber optic cable sensor unused in original packaging -Type: UF87PA3 -Number: 3x sensors available -Price per piece -Dimension box: 105/90 / H40 mm -Weight: 0.2 kg / pc.

x-travel: 1800 mm y-travel: 1000 mm z-travel: 1000 mm table surface area: 1000x1000 mm turning speeds: 4000 U/min head swivability: 90 ° Tool changer: 45 chip conveyor: control: Heidenhain type: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 1350 mm z-travel: 1400 mm spindle taper ISO: 50 turning speeds: 22-1400 U/min Rotary table: 800x600 mm Table dimensions: 2500x1200 mm Feed: 5-3000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 y-travel: 650 mm z-travel: 542 mm Control: Heidenhain type: TNC 426 table surface area: 800x600 mm c-axis: 1/1000 ° table - tiltable: 45 Grad swing dia.: 1200 mm spindle taper ISO: 40 turning speeds: 0-5000 U/min Tool changer: 30 Pos : chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Knuth UFM 2 Universal Milling Machine Specifications X-axis travel (manual) 800 mm X-axis travel 750 mm travel Y-axis 300 mm travel Z-axis 400 mm Table size 1320x320 mm T-slots 5x14x63 mm Feeds Y-axis travel (8) 20 - 360 mm/min Z-axis travel 600 mm/min Spindle speed (12) 58 - 1800 min-1 Vertical spindle taper SK 40 Distance between spindle tip and table 0 - 400 mm Head rotation 45° Cone of the SK 50 horizontal spindle Drive Main engine power 4 kW Motor power in the Z-axis 0.75 kW Feed motor power 0.55 kW Cooling pump motor 0.09 kW Coolant pump capacity 25 l/min Dimensions and weight Dimensions: 1900x1720x1750 mm Weight 2100 kg More items - new and used - can be found in our shop! International shipping costs on request!

Universal milling machine UF20 LVQE Table Y 320 mm X 1200 mm Z 800 mm Table length 1.55 m Speeds: 45 - 2000 rpm 16 A 380 V Length 1.30 m Width 1.20 m Height 1.90 m Swivel head Coolant pump Feed Accessories

Inv. Num. : 7155 Type: UR4-4DD-UF6 Producer: HMP Created: 2000 Parameters: Max. diameter: 25 mm Components: Reducing hammers with 4 segments 6-segment roll forming hammers

Capacitive sensor, electronic sensor -Manufacturer: IFM -Product Type: UF66VCF3 -Quantity: 1 available -Price: per piece -Weight: 0.2 kg

Automatic rebating machine / automatic cross-cutting machine 2 spindles

inner taper of milling spindel: Spannzangenaufnahme collet diameter: unbekannt turning speed range: 1,3 x der Antriebsdrehzah U/min : 165 mm distance spindle - column: ? mm weight of the machine ca.: 28 kg dimensions of the machine ca.: 350350200 mm Shipping weight: 35 kg Packing: ( ca. 400400400 ) mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 y-travel: 650 mm z-travel: 542 mm Control: Heidenhain type: TNC 426 table surface area: 800x600 mm c-axis: 1/1000 ° table - tiltable: 45 Grad swing dia.: 1200 mm spindle taper ISO: 40 turning speeds: 0-5000 U/min Tool changer: 30 Pos : chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2500 mm y-travel: 1300 mm z-travel: 900 mm Control: Heidenhain iTNC 530 table surface area: 2500 x 800 mm table load: 5,0 t tool taper: SK 50 DIN69871 spindle turning speed range: 36 - 4000 U/min feed range: 2 - 12000 mm/min main drive: 25 kW total power requirement: 50 kW weight of the machine ca.: 17 t dimensions of the machine ca.: 8,4 x 4,5x 3,8(3,9) m The main engine was overhauled in September 2022 for € 6,000. The machine was partially overhauled in 2007 Scope of overhaul: Feed motors were overhauled New Heidenhain iTNC 530 control system with new main spindle drive (Siemens) Retention of the control cabinet and feed drives Geometric overhaul of the machine Overhaul of the tool changer Defective guideway covers were repaired or replaced The milling head was completely overhauled approx. 3 years ago. Equipment: CNC control Heidenhain iTNC 530 Horizontal/vertical swivell ...

Manufacturer: Uffe Sass, Type: Werkstückwender, Year: 1998, Control: no, Work piece width min-max mm: 500-1300, Min.-max. workpiece length in mm: 500-2800, Min.-max. workpiece height in mm: 10-60, Continous adjustable feeding speed m/min: möglich, Feeding engine kw: 2 X 1,0, Working hight mm: max 60/veränderbar, Klemmun Pneumatisch: yes, Single machine: möglich, Machine from production line: möglich, Belt width: 1300, Total lenght: 3000, Feeding speed max m/min: über Umrichter variabel, Working hight adjustable mm: yes, Year :1998

Weight: 3 t x-travel: 1000 mm : 110 milling-head swivable +/-: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 1.50 mm daylight opening: 100 mm bending angle max.: 135 ° height: OW 100 mm total power requirement: manuell weight of the machine ca.: 330 kg. dimensions of the machine ca.: 1600 x 900 x 1450 mm Equipment: - robust, manual swivel bending machine - divided upper tool - lower and rear tool Height of upper tool = 100 mm Division 100/100/100/100/100/100/100/70/60/50/40/30/100 left + right with horn tool - upper tool with quick-change system - quick foot clamp - angle stop - lockable - manual rear stop 500 mm - machine can be moved (rollers) - accessories box - rear Pictures show identical machine (UFA 1212) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 450 mm y-travel: 200 mm z-travel: 465 mm total power requirement: 2,6 kW weight of the machine ca.: 1.2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU316W1182 LocationBarneveld MakeHaver & Boecke TypeUFR 219X2900 No.23/191770/02 Main Features MaterialStainless steel Length2900 mm Width219 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder diameter219 mm Feeder length2900 mm Closedcheck InletDia. 150 mm OutletDia. 215 mm With vibro motor2x With motor2x 3 kW, 220-240/380-415 volt, 1500 rpm Information Year of construction2002 Floorspace2,85x0,65 m Total height0,80 m Weight180 kgVibro feedersHaver & BoeckerConveying systems > Vibro feedersBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU316W1181 LocationBarneveld MakeHaver &: Boecke TypeUFR 219X2350 No.23/191770/03 Main Features MaterialStainless steel Length2350 mm Width219 mm Specified Features - Vibro feeder Vibro feedercheck Feeder diameter219 mm Feeder length2300 mm Closedcheck InletDia. 150 mm OutletDia. 200 mm With vibro motor2x With motor2x 3 kW, 220-240/380-415 volt, 1500 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General Year of construction2002 Floorspace2,30x0,60 m Total height0,85 m Weight180 kgVibro feedersHaver & BoeckerConveying systems > Vibro feedersBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU445W1480 MakeColortronic LocationBarneveld TypeM253-ST-ÜFS-2.2KW Main Features Motor2.2 KW Inlet diameter100 mm Width250 mm Specified Features - Granulator Materialstainless steel 1.4721(heat resistant) Granulatorcheck Rotor width250 mm Rotor diameter160 mm Number of rotor knives3 Number of stator knives:2 With hoppercheck Inletø 100 mm Hinged topcheck Motor2,2 kW (230/400 volt, 1445 rpm) Rotor speed109 rpm Information No.69990109 Year of construction1999 Mounted on framecheck With switchcheck Floorspace0,80x0,50 m Total height1,10 m Weight150 kg Extra SpecificationsWith S+S metal seperator, type Rapid Compact 100GranulatorsColortronicMills > GranulatorsBrand > Colortronic What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

General SKU445W1539 MakeColortronic TypeM253-ST-ÜFS-2.2KW No.69990108 Year of construction1999 Mounted on framecheck Main Features Motor2.2 KW Inlet diameter100 mm Width250 mm Specified Features - Granulator Granulatorcheck Rotor width250 mm Rotor diameter160 mm Number of rotor knives3 Number of stator knives:2 With hoppercheck InletDia. 100 mm Hinged topcheck Motor2,2 kW (230/400 volt, 1445 rpm) Rotor speed109 rpm Materialstainless steel 1.4721(heat resistant) Information LocationBarneveld With switchcheck Floorspace0,80 x 0,50 m Total height1,10 m Weight150 kg Extra SpecificationsWith S+S metal seperator, type Rapid Compact 100GranulatorsColortronicMills > GranulatorsBrand > Colortronic What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

Milling machine, universal milling machine, tool milling machine, drilling and milling machine -clamping table: 705 x 310 mm -Device table: rotatable/tiltable/swiveling -X/Y/Z travel: 550/340/420 mm -Spindle mount: SK40 -Speeds: from 46 to 2110 rpm -Feed: 12 to 254 mm/min -Pinole stroke: 80 mm -Rapid traverse: mm/min -Coolant device: -Dimensions: 1620/1700/H1810 mm -Weight: 1768 kg

Universal Filling Device Fritsch UFG-EPA-08RHG-NL20 Year of Make: 2008

Universal filling device Fritsch UFG 8 Year of Make: 1997

This 5-axis SHW UFZ 6L Bed Type Milling Machine was manufactured in 2008. It features an impressive X-axis travel of 6000 mm, Y-axis travel of 2100 mm, and Z-axis travel of 1600 mm. The machine includes an automatic tool changer with a capacity for 150 tools and a robust clamping plate surface of 3600 x 3750 mm. If you are looking to get high-quality milling capabilities, consider the SHW UFZ 6L machine we have for sale. Contact us for further details.

Universal Filling Device Fritsch UFG 20-30-8 Year of Make: 2002

wire diameter 0,8-3 mm spring diameter 50 mm feeding length 14450 mm output pieces/min 125

wire diameter 0,2-0,8 mm spring diameter 20 mm feeding length 3910 mm output pieces/min 220

: neu : 2025 : 080093 : prompt, Zwischenverkauf v : Türkei : 6130 € : 118.31 € : 1 : 1050 mm : 1.5 mm : 1 mm : 2.2 mm : 150 ° : 500 mm : 200 mm : 1300 mm : 750 mm : 1515 mm : 280 kg : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 080200 : prompt, Zwischenverkauf v : Türkei : 6550 € : 126.42 € : 1 : 1250 mm : 1.25 mm : 0.8 mm : 2 mm : 150 ° : 500 mm : 200 mm : 1500 mm : 750 mm : 1715 mm : 315 kg : geteilt, 45° : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:16300 mm y-travel:2600 mm z-travel:1600 mm spindle taper ISO:50 spindle turning speed range:22 - 4000 U/min rapid traverse:24 / 36 m/min main drive:37 kW total power requirement:50 kW with CNC HEIDENHAIN TNC 430 automatic Universal Milling Head automatic toolchanger 90-pockets coolant attchament and chip conveyor

Power: 1400 W Auction-ID: A1-48358-4

Infrared switch, infrared sensor with contamination signal WENGLOR UF55PBV 10 - 30 VDC diameter sensor: Ø 30 mm approx. 2 m Connection cable New ! Dimensions(packaging): 135 x 125 x 45 mm

Monitor, TFT-LCD Industrial - Monitor UNIPO UFP 8.4 ( UFP8.4 ) 2TT0801CDN00N 84 - 264 V AC 47 - 63 Hz max. 40 W 8.4 screen spare part for Toyoda HES52 ! used. tested ! Dimensions: 240 x 210 x 185 mm

VREDO Self-Propelled Trac – Wood Processing / Infeed System General data: Manufacturer: Vredo Machine type: Self-propelled processing unit Year of manufacture: 2012 Equipment: FTG 400 infeed crane with tree clamp 3x infeed rollers Folding hopper Wear plate blow pipe Description: Self-propelled VREDO Trac unit equipped with infeed crane and wood handling system, designed for forestry or biomass processing applications. The machine enables efficient feeding, gripping, and processing of logs or branches, making it suitable for wood chipping, shredding, or biomass preparation operations. Auction-ID: A7-40556-30

Device has not been checked for functionality - parts may be defective or missing; Auction-ID: A1-48886-2055